Printing to Acrobat 9 Pro renders giberish text

When printing from the net to my Acrobat 9 Pro the image output is perfect yet the text is all giberish. Can anyone help?
Thanks in advanced.
Francisco De La Chesnaye
[email protected]

Similar Messages

  • Can't Print from Acrobat 9 Pro on windows 7 64bit....

    I have a windows 7 64-bit computer that can't print to any printer from Acrobat 9 Pro.  When you try to print I get the following error:
    "print driver host for 32 bit application has stopped working"
    Any thoughts, it's driving me crazy....

    I'm having the identical problem and the only way I can get it to work is by not trying to change the title suggested by Acrobat for the PDF.
    If I try printing from Firefox and pasting in a new PDF title, it crashes Firefox.

  • Printing on acrobat 9 pro

    I try to print on Acrobat 9 pro
    I see the acrobat printer application is working
    At the end, I have no file !
    pls help if you can

    I've never had problems printing to postcript from Pages and going thru Adobe Acrobat for my pdf files....until Pages 09. You mentioned a "previous discussion;" can you point me to it? Is it as recent as 09?
    I've been able to isolate the problem to certain pages objects, but doesn't seem to be any pattern. I've extracted the objects and re-saved them in Preview, inserted them and solved the problem, at least a time or two, but far too much work!
    Wonder if re-installing iWorks09 might help?

  • PDF prints from Acrobat 8 Pro, but not from Acrobat 9 Pro

    I have a PDF that prints fine when I print from Acrobat 8 Pro, but when I open the same PDF in Acrobat 9 Pro, only portions of each page actually print out.
    All systems running Windows XP Pro, SP3
    A8P 8.1.2
    A9P 9.1.1
    Any ideas?

    Well, for those following this thread or needing a solution, I found a work-around though I'm still not sure why the initial problem exists.
    In Acrobat 9 Pro, once you have the main print dialogue box open, follow the steps below:
    1) Click ADVANCED
    2) Select PRINT AS IMAGE
    3) Set DPI to 300
    4) Click OK
    5) Make any other typical print setup adjustments as you normally would and finish printing as usual

  • SLOW PRINTING to Acrobat 8 Pro from Office 2007 on OS Win 7 Pro after updating to 2.0-2.3 ...???

    Everything worked fine for a while. Keeping machine updated and such. Yes have older version Acrobat Pro 8 and downloaded the update files and slowly working through updating. Now on version 2.3. I noticed before that version 3.0 and 3.1 were not allowing me to create pdfs via the Acrobat icon. At the time I could print via "print", but some Office programs were missing Acrobat ICON too.
    Now, my problem: I can't print directly from Office. I can't print within Acrobat. It takes an extremely long, long time (longest wait was about 1/2 hour) to print just one page of text. I found that if I first print using Microsoft's XPS printer function (but only through Acrobat, again, not directly via the XPS print function), then I can easily convert that to a PDF. I've been in the habit of sending PDFs and not everyone is familiar with XPS, so don't want to send that type of file.
    Can anyone help in determining why printing PDF is sooooo slow or not printing at all?
    Thanks.

    Everything worked fine for a while. Keeping machine updated and such. Yes have older version Acrobat Pro 8 and downloaded the update files and slowly working through updating. Now on version 2.3. I noticed before that version 3.0 and 3.1 were not allowing me to create pdfs via the Acrobat icon. At the time I could print via "print", but some Office programs were missing Acrobat ICON too.
    Now, my problem: I can't print directly from Office. I can't print within Acrobat. It takes an extremely long, long time (longest wait was about 1/2 hour) to print just one page of text. I found that if I first print using Microsoft's XPS printer function (but only through Acrobat, again, not directly via the XPS print function), then I can easily convert that to a PDF. I've been in the habit of sending PDFs and not everyone is familiar with XPS, so don't want to send that type of file.
    Can anyone help in determining why printing PDF is sooooo slow or not printing at all?
    Thanks.

  • Printing from Acrobat X Pro

    I converted a web page to a pdf in Acrobat X pro. The result was two pages of text and a few uncomplicated images. I tried to print those two pages to a standard desktop printer. Acrobat then  proceeded to "flatten" the pages...whatever that means. Flattening of each page took approximately 4 minutes...so I had to wait 8 minutes before my two pages could actually be printed. I then decided I wanted an extra copy of the pages, asked Acrobat X to print them again. Instead of remembering the version it just created during the "flattening" process, it started all over and took another 8 minutes to flatten the two pages before printing.
    How do I get acrobat to just print the document as a text page with images, like it always did in Acrobat 9? This is EXTREMELY frustrating and terribly inefficient. It's pretty useless for printing as it now operates, which is a big problem for me. And what is "flattening"??
    Thanks.
    Chick

    OK, well no offense, but that's a odd response. I said that I have been running a dual Office 2010 and 2013 for over two years right along with Acrobat X Pro without problems. So telling me it is not compatible and that I should upgrade, is sort of a odd response.
    However it may point to the possibility that I should be careful to save the DOCX in compatibility mode, which I might have been doing previously and then failed to do this time, over and over again.
    I will test that theory out. So odd response or not, it may have given me a clue to solve the problem. But if it is solved, it will not be because I followed your advice.
    Best regards!

  • Cannot print in Acrobat 9 Pro

    Hello,
    I have been unable to print a single PDF in Acrobat 9 Pro for Mac. I am running OS 10.5.7 on a MacBook Pro.
    When I do try to print, the document is spooled to the printer, and shows up in the queue as expected, but stops after a few moments. I am able to print PDFs with Preview, as well as various other non-PDF documents of course.
    What can I do to fix this problem? I have reinstalled several times.
    thanks!

    I hope you are not being bitten by the bug where you can not choose a printer in the page setup.
    If not - in Page Setup click on  Format for: click the Any Printer and a Pop down list should show. Pick the printer you use and set page size. the click on top button Save Attributes: and click Save As Default.
    If that don't work. Adobe either its a bug or Adobe is not aware Page Setup and Print are two different things. Page Setup set the default printer you usually want to use for an applications. And the choices in Printer are for choosing a printer for specific job if needed. For example say I usually use a LaserWriter that prints standard legal size or letter size paper. But say I want to use a Roll Printer that want to print 22" sheet for a particular job.
    That's what the choices are for  in Print menu, you can switch to a specific Job.  if this is missing then altogether, then some designer must only use one printer for everything and see's no reason fot Page setup's use (pardon my small rant).
    Now back to if it doesn't work. Try looking up your Printer on internet and look for a new driver and install or even download a fresh copy of the driver you have could be a little something off for Acrobat.
    Here's the proper way to install:
    Download the most current version of your print driver.
    go to System's Printer Utility and open (make sure all applications are closed that use the printer).
    delete the printer you downloaded the Driver for. Close Printer Utility.
    Install the driver downloaded.
    Reopen Printer Utility and ask it to find your printer. when it shows up ina List click on it and save.
    choose it as you Default printer for the entire Computer. This would be what it would default to, should you not be able to set one. quit after setting Default.
    Now Re open Acrobat. If you can set in Page setup choose this printer and save as Default (for Acrobat). Now open your Pdf and Try printing. If this doesn't work I'll post something else to try.

  • Adobe PDF Printer missing (acrobat 9 pro, XP pro)

    Hi,
    I searched the forums and found some similar problems, but not with my config, and, no solution.
    I have installed Adobe Creative Suite CS4 to a new, clean system. It runs on WIN XP Pro. This installation includes Acrobat 9 pro.
    Sadly, the printer is NOT in my printers list. I cannot print to PDF via file>print.
    I tried help>repair in acrobat, but no difference. I also upgraded the newest versions of my adobe software via adobe updater.
    Can anybody help me please? I don't want to install third party PDF writer, I paid for Adobe and I want to use it properly. Thank you

    Simon ATS:
    I run the Support advisor toot, it said:
    "The module found no solutions to report for the selected log file.
    If you continue to have difficulties with the application,
    please contact Adobe Support: http://www.adobe.com/support
    System Information :
    Operating System = Windows XP Professional Service Pack 3
    Locale = cs"
    When I wanted to close the Support tool, it said:
    "Creative Suite Product Install Inspector has identified an issue that needs attention.
    An issue report has been generated.
    Adobe will use this issue report to help address this issue in the future."
    Nothing else...
    J.R. Sanford:
    I checked it, and only RPC is listed. BTW I noticed, that now I am receiving worse PDF outputs from some settings like "High quality print" (from InDesign). Vectors are ugly and has edges. However, exporting to 2001x/1a is good. I am very disappointed :(

  • Gray becomes green when a Adobe 8.1.0 PDF is printed with Acrobat 9 Pro ...?

    Hello,
    when the PDF file which was created with Adobe 8.1 is printed with Adobe Acrobat 8 Pro the gray is as it should be.
    If the same file is printed to the same printer (same settings) with Adobe Acrobat 9 Pro on another Workstation in the same office the gray becomes kind of green.
    I noticed the grayscale Option in the Adobe Acrobat 9 Pro was set to Dot Gain 20% instead of Gray Gamma 2.2, so i changed it but the gray still gets printed as a green.
    I really would appreciate any help!

    Martha:
    Acrobat 9 installation is fraught with problems. All four writers who tried to install it at one customer location had problems getting the A'9 to work properly after installation -- and the problems were all slightly different.
    And so too were the responses given by Adobe support. In one case A'Support recommended running a cleanup tool, in one case it insisted that the program should install with the same serial number as the Tech Comm Suite that putatively includes A'9, and in another case it simply "punted" and gave the I.T. folks a new, separate serial number to circumvent the otherwise unresolvable installation problems.
    Apparently we can add sending people with A'9 problems to the FrameMaker forum to that list...
    Cheers & hope this helps,
    Riley

  • Problems printing lines Acrobat 9 pro

    I am trying to print some government forms that are generated by an Access 97 program ( I know old and I should get user off) But when we generated the forms in Acrobat 8 std all worked well.  Moved to Acrobat 9 pro and now lines are being dropped.  Form is NAFTA Certidicate of Origin and complex.

    How are you creating the pdfs? If you are indeed printing to pdf, what joboptions file are you using now? What were you using before?

  • Acrobat XI Pro Mac: Changing Text Color moves Text within Paragraph

    Dear Acrobat Experts!
    I've been using Acrobat Pro for over a decade now (Win and Mac) - but Acrobat XI Pro Mac shows some behavior I cannot deal with:
    When I'm changing text color of say a couple of words within a paragraph, usually the formatting changes and text is being moved/shifted. It looks like the text with altered color requires more space and consequently the following words are shifted which very often ruins the whole formatting. This makes Acrobat XI for me nearly unusable, I had never a behavior like this in former Acrobat versions (Win or Mac).
    I cannot believe that this is "normal" - so what's the mistake I'm making? For illustration please see the two screenshots I included.
    I'm looking forward to your helpful comments!
    Oliver

    Hi Sukrit!
    Thanks for your assistance.
    This is the first and only Acrobat version ever I had this problem with. I am running Acrobat Version 11.0.10 under Mac OS X 10.10.3 Yosemite on a MacBook Pro 15" Retina display. I am working on Mac only since Acrobat Pro 7 - the versions before were Windows.
    So I cannot comment on Acrobat XI Pro Win.
    This is happening with all of my PDF docs - regardless of origin (textbook, scientific journal, or PDFs I generated by myself as export from office applications etc.).
    The only difference is the amount of changes to the formatting (shifting of text).
    To illustrate my workflow I generated a screencast and uploaded it here:
    <Dropbox - Acrobat_XI_Pro_Mac_3.mp4>
    Looking forward to hear from you again!
    Oliver

  • FF4 print to PDF (Acro Pro) renders text as image (FF3 did not)

    When I create a PDF with Acro Pro using FF4 the text is rendered as an image. FF3 did not do this (other browsers render text as text as well). Win 7 Pro 64-bit, FF 4.0

    Oh man, you really made my day!!
    This nasty error has been torturing me for several weeks now.
    I installed and reinstalled and again all Adobe software, with no effect, I checked and rechecked all settings with other pc's since they all made perfect PDF's.
    But not this one!!
    Unchecking the "hardware acceleration box" did the trick.
    Who would have thought of that one!!
    Just look at my happy face now.
    Mozilla should really fix this weird bug.

  • Trim Marks Not Printing from Acrobat 9 Pro

    I work at an envelope printing company, and we have recently
    upgraded my computer (Windows XP Pro SP 3) to Creative Suite 4.
    When I try to print a customer's PDF file with trim marks to show
    our typesetting department how to place the art, the trim marks
    don't print. I have tried every option I can find in the Advanced
    section of the Print dialog box. What worked for Acrobat 8 doesn't
    work for me anymore. Does anyone have any suggestions?
    Thanks for your help!

    Hello,
    I'm sorry I'm not able to address your question. These forums
    are specific to the
    Acrobat.com website and its set of hosted services, and do
    not cover the Acrobat family of desktop products.
    Any questions related to the Acrobat family of desktop
    products would be best suited in the Acrobat User Forums:
    Link to
    Acrobat Forums
    Thanks!
    Michelle

  • Win7 does not show "Adobe PDF" printer using Acrobat 8 Pro

    using Acrobat Pro 8.1.0 I cannot see or add Adobe PDF printer. I do see "Microsoft XPS Document Writer" as a printer.

    Concentrate on getting the scanner working without any Adobe software. Once you can scan to a file, any OSX program (except Adobe) that can read the file can generate PDF files via the Print command.

  • Cannot print duplex Acrobat X Pro (Mac OS X 10.7)(Brother MFC-J625DW)

    I just purchased a new Brother MFC-J625DW and I have lost the ability to print duplex.  This printer is a able to print duplex.  I have attached a screen shot of the printer dialog box. 
    I have installed the most up-to-date driver.  I have unistalled the printer and reinstalled the printer without success.
    I am able to print duplex from Adobe 9 Standard from a Windows machine to this printer.
    Anyone have a fix for this?
    Thanks

    [ moved to the Acrobat printing forum ]

Maybe you are looking for

  • JTextField and JTextArea don't get focus occuasionally

    I am developing a Java Swing Applet. At edit mode, JComboBox, JCheckBox, JRadioBox, and JButton work fine, but JTextField and JTextArea can't get focus occuasionally while I click them. Anyone has idea? Thanks

  • Deletion of Characters in String

    Hi I having a problem. Below shows String s = "Hello"; for (int i = 0; i < s.length(); i++) { if (s.charAt(i) != 'e' && s.charAt(i) != 'o') { System.out.print(s.charAt(i)); If I want to let user to key in the string and the program will be able to de

  • Java API for SOAP Messages

    Hi I need Java library for dealing with SOAP messages (e.g., serializing, deserializing, etc.). I don't actually need a complete server, only a library. Is SAAJ, http://java.sun.com/webservices/saaj/index.jsp, the right choice? Or JAXM, http://java.s

  • Output Panel does not show

    I'm trying to Output to PDF from the Bridge CS4. When I click on the Output button to get the Output workspace, no Output panel appears on the right. In fact, I cannot find the Output Panel at all. It is supposed to contain the buttons to create a PD

  • LaserJet 2605dn initializes, then ready, then says printing but nothing happening

    The 2605dn initializes, then goes ready, then when I try and print any config pages from the control panel goes to "printing" on the control panel but nothing happens.  Just sits there staring into space.  Any ideas?  User manual not helping and not