Printing to Adobe Acrobat in Leopard

I recently upgraded to Leopard. I love it but have one problem: I have Adobe Acrobat 8.0 and with Tiger I could print to Acrobat. Since upgrading I don't have that option & can't find how to enable it. I know, I know - I can just "Save as PDF..." but saving to Acrobat make for smaller files & give me more options. Any suggestions?

Hi. I haven't intalled my new Leopard yet due to the Acrobat problem. In my case I export my InDesign files to make high res acrobat originals all ready for printing either its for a small ad, a large board or a big broshure. Is it wise to hold the Leopard installation until the Acrobat problem i s fixed?

Similar Messages

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error. I am running Mac OS 10.10.1. This only started happening when I installed the update of Adobe Acrobat.

Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave

Can't print from Adobe Acrobat 11.0.07 on my MAC OS 10.6 to HP PSC 1350. Error: PSTOPDFFILTER/PSTOCUPSRASTER FAILED WITH ERR NUMBER 13. How do I fix it so I can print?

Can't print from Adobe Acrobat 11.0.07 on my MAC OS 10.6 to HP PSC 1350. Error: PSTOPDFFILTER/PSTOCUPSRASTER FAILED WITH ERR NUMBER 13. How do I fix it so I can print?

i am getting the same error, suddenly, on 10.9.5

Printing with Adobe Acrobat 9 Standard

Does anyone have issues printing in Adobe Acrobat 9 Standard with the HP CM1415fnw? I thought I have the latest driver downloaded.

Check the settings in the Print Screen / Page Handling section - you may need to check or un-check the auto rotate and center button?

Can't print via Adobe acrobat reader!

I can not print via Adobe Acrobat reader even though all other application work well with the printer and there is no hardware or connection problem involved.
the printer is: HP LaserJet Pro CM1415fn Color Multifunction Printer
The same thing happened to my outlook but I fixed it by reinstalling the printer software,
I think reinstallation is not the way of fixing it, does anyone have the same problem or can help me?

Hello
I understand you can print from all other programs except Adobe acrobat reader.
I have included a document to troubleshoot this issue for not being able to print pdfs.
Check your version and select the appropriate one to proceed.
http://helpx.adobe.com/acrobat/kb/troubleshoot-pdf-printing-acrobat-reader.html
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

If I have a subsciption how do I print an adobe acrobat document?

If I have a subscription why can't I print an adobe acrobat document?

Hi rai9154,
Would you mind elaborating on what you are trying to do? Are you wanting to create a word doc from a PDF?
Kindest regards, Stacy

How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard.

How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard. (I selected 'Fit to scale' and there's a huge gap on the top and bottom).

Those margins are usually reported from the printer settings to Acrobat. Meansif you have, for example, an inkjet printer and that printer can not print seamlessly, then there will be a minimum margin.
Check your printer's page settings.

Printing from Adobe Acrobat 8.1 under OS 10.6.7 to CANON PIXMA MX300 printer

If I DRAG the icon for my Adobe Acrobat file (made with AA ver.8.1 on OS 10.6.7) to printer icon (printer is a CANON PIXMA MX300 I bought at Apple store), I print just fine but if I try to print from within Adobe Acrobat, I get an error message in the Apple printer queu every time. I had no problem on OS 10.5.8 with the same versions of software applications. Anybody know what the h is going on here? I've restarted printer, computer, changed the ink cartridges, run software updaters, run DU... ??????????

Actually Human wrote:
...my Adobe Acrobat file (made with AA ver.8.1 on OS 10.6.7) ... I've run software updaters, run DU... ??????????
Consider running software updaters again as the current version of Snow Leopard is 10.6.8 and Adobe Acrobat is 8.1.5 (AA Pro is 8.3.1). If you use Software Update to update to OS 10.6.8, afterwards run check software update again to see if it offers updated drivers for Canon printers. If not, try the Canon website.
HTH

Printing in adobe acrobat 9 standard

when printing a pdf file from a autocad lt 2011 program using adobe acrobat 9 standard program, viewing the pdf file some of the text is missing (random text missing not always the same) this does not happen all the time. does anyone know why this would happen?

Check the settings in the Print Screen / Page Handling section - you may need to check or un-check the auto rotate and center button?

Printing from adobe acrobat or word

Hi!
I have never been able to print the resulting file from inside the Word or adobe Acrobat applications on my Mac OSX G5. As long as I could save as
pdf on the desktop, and then open with preview and print from there I was
sort of happy. But if someone can tell me what is causing this problem already I'd be happy to fix this.
Now what brings me here is that documented abobe acrobat documents appear unfilled (none of the added text shows up) when I try and print such resulting pdf file e.g. when someone else has edited and sent me the file over an email. The added text is gone and I do not see it with preview prior printing either. This is quite ennoying. I can of course grab the screen and print the result, but the page is smaller this way. Note that the save as pdf and preview options upon printing from inside adobe acrobat are grey which
does not allow a way out of this situation.
So what can I do to be able to print documented pdf adobe acrobat documents? Any settings or explanation for my printing problems?

Fallard,
No clue, (and sounds goofy to me)...
You might try downloading Printer Setup Repair from:
http://www.fixamacsoftware.com/software/index.html
It's shareware, and might help...
Hope it helps a little!
Bob

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

Problem printing with Adobe Acrobat X pro. No File Save As dialog

We have a C++ program to print a formatted report, by selecting the configured printers. "Adobe PDF" printer is available on install of Adobe Acrobat Pro.
During report print when "Adobe PDF" printer is selected, the report use to get printed in a PDF document & saves at the path provided by the User.
Internally it uses printer APIs like OnBeginPrinting, StartDoc, OnPrepareDC, StartPage, OnPrepareDC etc.
Report printing was working fine with Adobe Acrobat Pro 9.1. But since I installed Adobe Acrobat X pro (with update as 10.1.3) I am unable to print PDF document using "Adobe PDF" pinter.
StartDoc API does not pops up the "File Save As" dialog at all.
Any help in this regard, would be very useful.
Note: My code is working fine, if I use freeware like CutePrinter.
Thanks,
Amit Agrawal

Interesting. My approach would
1. Try on a different system if available. If still bad...
2. Try to create a simple test application with CreateDC and StartDoc, and really nothing else not absolutely needed.
Test that. If it is good, look for other problems in your application (e.g. memory overwrite).
If your little example is still bad, post it here and other people can try and compare your results.

Cannot edit text or any command other than print in Adobe Acrobat 9.0.1 Pro. Receive error message

I just installed adobe acrobat 9.0.1 Pro and it opens up pdfs and prints fine but when I try to edit text or enter any other command I get an error and it gives the option of cancel to debug or to exit program.
Error message:
The instruction at “0x2b806327” referenced memory at “0x00000348”. The memory could not be “read”.
Click on ok to terminate the program
Click on CANCEL to debug the program
At first it stated that it did not recognize the font but when I looked it up under file, properties, fonts. The font was helvetica (embedded subset) for all the fonts on the pdf file. I have also checked the sercurity tab as well and there is no security on the file.
When I choose cancel to debug it just terminates the program. When I choose ok it terminates the program.
Please help.

Maybe your installation is currupt (scratched CD)
Reinstall on another maschine (and clean CD) to validate this case.
Update your Acrobat, maybe the corresponding files are replaced or the error is fixed.

CANNOT Print with Adobe Acrobat 9

I am running Microsoft Vista with Adobe Acrobat 9 Standard.
When trying to print to a printer I get an error message that I need to install/select a printer.
I can print from any other application. Just now Adobe Acrobat 9 Standard.
I installed the free version of Adobe Acrobat Reader X and can print fine. I would prefer not to keep both applications on my computer.
I use Adobe Acrobat 9 to modify PDF documents and would prefer not to have to switch to the free reader just to print the documents.
I appreciate anyone's suggestions.
I have tried rebooting my computer, updating my printer files, turning the printer on and off and then on again.
I seems that for some reason Adobe Acrobat 9 Standard does not recognize my printer - an HP Office Jet Pro 8500. All other applications work fine with it.

Are you on Acrobat 9.4.2? If so, then please refer to the below mentioned KB Article.
http://kb2.adobe.com/cps/891/cpsid_89178.html (Solution 1 listed on the page)
Adobe has released an update to Acrobat 9.4.2 for the Print Issue in the form of an EXE. I have applied the fix on my system, and it seems to have fixed the printing problem.
You can try downloading and applying the EXE and see if it helps fix your problem.
Regards
Ankit

Trying to print freezes adobe acrobat 9 pro

The user had 6.0 pro when you click on print or print setup adobe freezes for 3-4 min then it would come up and print. I did (I thought I did) a complete uninstall and installed 9.0 pro but the problem still exsists. Thanks for any responses.

I have the same damn problem. Win 7, latest u
pdates, Acrobat Standard 9 latest updates, lots of ram, etc. Never a problem before w/Acrobat freezing when I
select it as a printer. I suspect this is adobe issue despite your requests
for specs on the computer.

Printing to Adobe Acrobat in Leopard

Similar Messages

Maybe you are looking for