Printing to Adobe PDF printer and getting the same document, possible??

Hello:
I need to split a page A4 into 2 pages, it's possible using print, then tile large pages, the problem is that my original document is black and white, but the generated one has a shades of gray visible when zooming to 800% (and the size is much bigger), so my question is:
is it possible to print a document to Adobe PDF printer and getting exactly the same document?? same size, same black and white
I'm using acrobat6

I suspected as much.  I was hopeful it was something like a setting that needed to be changed or a reg hack that needed a bit changed from 0 to 1 to make the printing work as expected.  I only installed the local printer to see if the RDP session
tunnel was in fact causing the print size to balloon so I will continue to instruct users to use that instead of the local redirected printer.  I am disappointed but not surprised.
Edit:
Additionally I have tested the functionality of setting the GPO settings for Easy Print to use the redirected printer's drivers instead of the ones used by easy print, by setting “Computer
Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection”.
to “Disabled” but
with no luck.  In fact the printer received the proper Adobe PDF driver, but the job went out into print spool hell and was lost to the ether.  I have concluded that this approach will not bear any fruit.

Similar Messages

  • When I try to open a download PDF I get message to install Adobe Reader. I do it and get the same message already installed. I close Safari and reopen but get same message to install Adobe

    When I try to open a download PDF I get message to install Adobe Reader. I do it and get the same message already installed. I close Safari and reopen but get same message to install Adobe

    You don't provide any details, but from the sound of it you are trying to open an online PDF in a browser that does not use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • Internet Explorer 9 Printing to Adobe PDF Printer

    Missing Some Document Folders in Windows 7 Professional w/ Internet Explorer 9 Printing to Adobe PDF Printer.
    Document Library contains 81 folders.
    With Internet Explorer 9 running – when I print to Adobe PDF Printer and try to locate a specific Document Library folder - 9 of the 81 folders are missing.
    From Internet Explorer 9 – I locate a word or PDF document that I need to print to Adobe PDF Printer - This is the procedure that I follow:
    Print
    Select Printer
    Adobe PDF
    Libraries
    Documents
    My Documents - where 9 of the 81 folders are missing
    Additional Information . . .
    When I right click on a screen object in IE9 and select "Save As" I am able to locate and access all 81 folders.
    With the same task and procedure from Microsoft Chrome – all 81 folders are shown and accessible.
    Any help or pointing in the right direction greatly appreciated.

    That shouldn't even be possible: Standard and Pro are mutually exclusive. Not surprised it has broken.
    My recommendation
    a. Make sure you have your Standard serial numbers and install media.
    b. Uninstall the one you don't want at the moment.
    c. REPAIR the one you do want.

  • 3D PDF files in portfolio prints to Adobe PDF printer without content

    3D PDF files in portfolio prints to Adobe PDF printer without content, but if printed from single 3D PDF file everything is fine. I need batch printing (this is the reason I use portfolio) of large amount of 3DPDF files because of the need to have proper preview of these files in browsers. Any ideas or workarounds how to have preview pdf's or jpg's of the single paged 3D PDF files, keeping relevant file names?

    I suspected as much.  I was hopeful it was something like a setting that needed to be changed or a reg hack that needed a bit changed from 0 to 1 to make the printing work as expected.  I only installed the local printer to see if the RDP session
    tunnel was in fact causing the print size to balloon so I will continue to instruct users to use that instead of the local redirected printer.  I am disappointed but not surprised.
    Edit:
    Additionally I have tested the functionality of setting the GPO settings for Easy Print to use the redirected printer's drivers instead of the ones used by easy print, by setting “Computer
    Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection”.
    to “Disabled” but
    with no luck.  In fact the printer received the proper Adobe PDF driver, but the job went out into print spool hell and was lost to the ether.  I have concluded that this approach will not bear any fruit.

  • Re-use acrodist.exe process when printing to Adobe PDF printer

    We're using BarTender to print to Adobe PDF printer and it is creating an acrodist.exe process for each print job. Is there an Adobe setting or something BarTender could do differently to re-use an existing acrodist.exe process instead of creating a new one. We've noticed that Notepad will re-use an existing acrodist.exe process.
    Thanks,
    Paul

    Well, after restarting my machine the print queue was cleared of all the dead jobs, but when attempting to print to PDF it hung up again, and then did the same as before - all subsequent jobs tried to save as the filename of the first job in the queue. Very annoying!

  • How do I download a Adobe PDF file and get it converted to a Word document?

    How do I download a Adobe PDF file and get it converted to a Word document?

    Download: you just download it as you would any other document.
    Convert to Word: either using the ExportPDF online service, or Acrobat.

  • Installing Adobe Extension Manager and get the error message

    I am trying to install Adobe Extension Manager and get the error message ' Requires Photoshop 32 version in range of inclusively 13.0 and 13.9'  Please help me solve this, not sure how to proceede after getting a message that there is four updates available to download !

    Type <b> about:addons </b> in URL
    *plugins and extension -> disable adobe reader

  • I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8

    I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8.

    I am running Windows 7 64 bit ultimate and have the same problem.  My hard drive crashed, installed a new one and then reinstalled CS5 extended.  Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i.  The message also tells me I am not eligible for the update.  I am... and I cannot open my files and I could before.  I can find nowhere to contact Adobe to tell me how to proceed.  My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not.  If that means anything.

  • I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen.  I've rebooted, I've reinstalled several times and get the same result.  Two days wasted!

    I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen.  I've rebooted, I've reinstalled several times and get the same result.  Two days wasted and I can't use my computer!!

    I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
    Hope this helps.

  • My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai and a Dodge rent car and get the same results.  I updated the last 8.0.2.

    My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results.  I updated the last 8.0.2.  It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
    Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call.  This is happening on both cars.
    Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
    My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
    Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

    We had the same problem, but figure out the solution.
    You MUST have at least 1 song added to your ITUNE!  After you add a free song, then everything else should work as normal!
    Hope this helps!

  • Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
    tracking down the cause of the flakiness can be tricky ... as you already know ...
    just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

  • When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

    When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I just restored my ipad and now when I connect it, I get a message that says itunes dected an ipad but doesn't recongnise it.  it then tells me to unplug the ipad and plug it in again.l  I do that and get the same message.

    I just restored my ipad and now when I connect it, I get a message that says itunes dected an ipad but doesn't recongnise it.  it then tells me to unplug the ipad and plug it in again.l  I do that and get the same message.

    have you tried a different usb port? for the **** of it try restarting the computer as well

  • I can't burn CD or DVD.  I get a "medium write error."  I bought an external CD drive, and get the same message.

    I can't burn CDs or DVDs.  I get a "medium write error."  Bought a new external CD drive, and get the same message.

    What are you trying to achieve?  Are you trying to burn to disk via the iPhoto Share ➙ Burn menu? That produces a mini library on the disk that can be used only by a Mac running iPhoto.
    If you want to burn just some image files to a data CD/DVD disk then follow Larry's recommended workflow.
    What disk type and manufacturer are your using? What system and iPhoto version are you running?  Have you run the OS X Mountain Lion: Use Apple Hardware Test? When did the burning proiblem begin?  If you can't burn a disk from the Finder then it's a hardware or system problem and not an iPhoto one.
    OT

  • Is there a way to burn old cd's with new cd's and get the same volume/quality on playback?

    is there a way to burn old cd's with new cd's and get the same volume/quality on playback?

    RIP the CD as AIFF or WAV.
    Create a playlist then burn an audio CD.

Maybe you are looking for