Pro Applications Update 2005-01 keeps reappearing in Softwware Update

Hello. For the past few weeks, Pro Applications Update 2005-01 has shown up in Software Update. I have installed the update quite a few times, and it keeps appearing. I've told it to install several times. Computer info below is still accurate.

Have you gotten the latest update, which came out a day ago and includes support for FCS1?
If this is not a time-sensitive issue, you may want to just wait until 10.4.11, which may fix the problem.

Similar Messages

  • Thunderbolt Firmware Update 1.2 keeps reappearing in the App Store Update even after updating many many times.  I have no Thunderbolt cables connected.

    Thunderbolt Firmware Update 1.2 keeps reappearing in the App Store Update even after updating many many times.  I have no Thunderbolt cables connected.  I am running OS X 10.9.5.

    Hide Update in Mavericks
    Try re-indexing Spotlight.
    Spotlight – Re-index

  • MacBook Pro SMC Update 1.7 keeps recurring on software update tab

    In my software Updates list, the SMC Firmware update 1.7 just results in same update being available over and over.
    According to http://support.apple.com/kb/HT1237, there are two entries that could possibly match my macbook pro:
    MacBook Pro (17-inch, Late 2011)
    MacBookPro8,3
    MBP81.0047.B27 (EFI 2.7)
    1.70f5 (SMC 1.5)
    MacBook Pro (17-inch, Early 2011)
    MacBookPro8,3
    MBP81.0047.B27 (EFI 2.7)
    1.70f6 (SMC 1.7)
    I have verified that SMC 1.70f5 is installed on my system. Could someone at Apple take a look at this to try to track down why this software update keeps recurring in my Updates list - or why it doesn't install? And, yes, I have the power cord attached the whole time...
    Could it be a script logic error in /Library/Updates/041-9665/041-9665.English.dist perhaps? I've attached the hardware profile.
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,3
      Processor Name:          Intel Core i7
      Processor Speed:          2.2 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          8 GB
      Boot ROM Version:          MBP81.0047.B27
      SMC Version (system):          1.70f5
      Serial Number (system):          C0*******RJN
      Sudden Motion Sensor:
      State:          Enabled
    <Edited By Host>

    I have MacBook Pro 13" (mid 2010) and similar problem (gray screen, system not start, noisy fan, etc.)
    I applied last SMC firmware update 1.6
    as a result I have unworking MacBook Pro.
    When I have been looking table http://support.apple.com/kb/HT1237 I am realised that link http://support.apple.com/kb/DL1626 on update for MacBookPro8,1 1.68f99 (SMC 1.6) and for MacBookPro7,1 1.62f7 (SMC 1.6)  is same. And then I booted from Installation Disk1 with 10.6.4 and saw that my version of SMC is 1.68f99 instead 1.62f7.
    In my opinion it's the main reason of our common problem. Apple released not correct SMC update and this update made briks from our MacBook Pro!!!

  • The thunderbolt firmware 1.2 update keeps reappearing. I have a MacBook Pro and 2011 Thunderbolt display. Did not discionnect when upgrading to Yosemite (only read the instructions later). Thanks.

    Hi There,
    I have a MacBook Pro (late 2011) and a Thundertbolt Display. I have recently upgraded to Yosemite. Since then Thunderbolt Firmware update 1.2 keeps reappearing and I cannot complete the update (with and without display connected etc.). Any advice? Thanks.

    Hello HTG65,
    If the Thunderbolt Firmware Update 1.2: Keeps reappearing try reinstalling it following the steps in this article.
    Thunderbolt Firmware Update 1.2: Keeps reappearing and Thunderbolt ports and Target Display Mode may not work - Apple Support
    To resolve this issue:
    Shutdown your computer.
    Disconnect all Thunderbolt devices.
    Wait 10 seconds.
    If you are using a Mac mini with a Thunderbolt display, reconnect the Thunderbolt display directly to your computer via the Thunderbolt port. Do not connect other Thunderbolt devices at this time.
    Restart your computer.
    If the Thunderbolt Firmware Update 1.2 is offered, download and install it and restart your computer when asked. If the Thunderbolt Update is not offered, the update has installed correctly.
    Reconnect all Thunderbolt devices.
    Take care,
    Nubz

  • Mac Pro SMC Firmware Update 1.1 keeps repeating

    Recently I had my MacPro motherboard replaced by an Authorized Repair Center, and for the most part, everything has been working great since.  That said, as I've been performing my regular software updates, I've noticed that the "Mac Pro SMC Firmware Update 1.1" keeps appearing as new update.  I've installed this update multiple times now (or it seemed as though I did), but it keeps appearing with each new update.
    Is there some way I can complete the update?  Is it possible that there is some serial number conflict between my old/new motherboard that is preventing this?  Do I need to return my machine to the repair center?
    Thanks for any help.

    Did you actually run the update from your Utilities folder (where I believe it ends up)? You'll go through a process of rebooting and hearing the long tone / seeing grey screen and progress bar. Until it's actually run properly, you'll keep seeing reminders.
    Matt

  • Logic Pro 9 will not load because it needs Pro Application Support version 5.0 Can someone help?

    I have Logic Pro 9.1.4  When I attempt to open the application, I get the following message: 
    Wrong Pro Application Support version installed.  This version of Logic Pro requires Pro Application Support 5.0 (883.0) or newer.  ProKit: 722.0 (OS BUILD 9L31a)  I have tried to find Pro Application Support 5.0 as a download or update without success. I am currently on a MacBook Pro running OS 10.5.8  Any help here would be appreciated!
    Thanks

    Hi Ana,
    This is it.  Once I installed, Logic opened fine.
    I do have another question.  After updating Logic Studio, I now have both Logic Pro 9.0 and 9.1.4 and Logic Node 9.0 and 9.1.4  Do I need both of these on my hard drive?  Can I delete the 9.0 version?
    Thanks!
    David

  • "Pro Applications Update 2008-05" keeps being installed

    Hi there
    So, since 2008, everytime I perform a software update, that "Pro Applications Update 2008-05" is there, waiting to be installed... and it is. But it keeps reappearing.
    Any idea how I could tell OSX that it's been there for years?

    I figured out what the problem is for me at least. I had formatted my drive as Case Sensitive. I did a reformat (now it's just Mac OS Extended Journaled) and reinstall and Logic updates just fine now. In addition, other weird problems I was having have disappeared.

  • Pro Applications Update keeps coming

    After a clean install of Mavericks I reinstalled FCPX and (as I lerant from these Support Communities) also reinstalled DVD Studio Pro and Soundtrack Pro from the original FCP3 discs. As expected the FCPX Supplemental Content appeared in App Store Updates section, as did the Pro Applications Update 2010-02.
    Strangely however, the latter reappears as if the installation hadn't any effect, allthough some things like the Apple QMaster is installed indeed. Is perhaps the installation not noted somewhere in the system?
    Does someone knows how to prevent this recurring appearance of that Update?

    I'd recommend that you post your question in the FCP-X forum located here: Final Cut Pro X
    This is the Final Cut Studio forum.
    -DH

  • Pro Applications Update 2005-1 where the **** is it?

    Someone please tell me where Pro Applications Update 2005-1 is...
    I've had to downgrade to Mac OS X 10.4.9 because of some conflicts and after so many problems this is having me stuck. And how the **** do you email Apple to tell them your Serial Number is genuine even though the webform thinks it isn't?
    ARGH!!!!
    Thanks in advance
    Mike

    Have you gotten the latest update, which came out a day ago and includes support for FCS1?
    If this is not a time-sensitive issue, you may want to just wait until 10.4.11, which may fix the problem.

  • Pro Applications Update 2005-1 doesn't install

    I have installed DVD Studio Pro 4.0 with Compressor and QMaster.
    Then I updated DVD Studio to 4.03.
    With these Update there was also the Option to install Pro Applications Update 2005-1 1.1
    I marked it and the install routine proceed.
    After that both updates are marked with the green tick (checkmark).
    BUT after that, to check for newer Updates I started the Search Process again. And it found the 2005-1 1.1 Update again! And nothing more....
    Is there a way to get newer Updates in another way?
    Do I need the 2005-1 1.1 for newer Updates?
    What can I do do get the Update work properly?
    I hope somebody could help....
    Andreas

    Have you gotten the latest update, which came out a day ago and includes support for FCS1?
    If this is not a time-sensitive issue, you may want to just wait until 10.4.11, which may fix the problem.

  • New Pro Application updates are available Oct. 20, 2005

    Check software update. There are new Pro Application and Support updates. This update also includes an apparent fix for problems when transcoding between HD and SD and when converting between NTSC and PAL.

    When I try to convert DV-NTSC to DV-PAL or Uncompressed 8-bit (UN8) NTSC to UN8-PAL, using the Apple Presets in Compressor, I get files that are in PAL resolution (720 X 576), but they all have a frame rate of 29.97 fps.
    I have installed this Pro App update. Was this update supposed to fix this particular problem?
    Any other ideas about this particular problem?
    My system:
    Dual G5 2.3GHz
    4.5 GB RAM
    OS 10.4.2
    FCP 5.0.2
    QT Pro 7.0.3
    Compressor 2.0.1
    massachi

  • Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

    macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. 

    I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
    This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
    After making your backup try the following:
    Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
    Launch the App Store, click the "Store" menu, and sign in with your AppleID.
    Open the main page of the App Store and search for iPhoto.
    If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
    If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

  • Pro Applications Update 2007-02 Can't be installed

    Hi, not sure if this is a Leopard thing or a Logic 8 thing, but I cannot install the latest software update "Pro Applications Update 2007-02 v1.0 930kb" - it downloads and then says "Sorry an unexpected error occurred" - not very helpful
    Any suggestions?
    TIA

    UPDATE
    Ok, Found what the issue is. Its down to a Quicktime Codec that you can find in /Library/QuickTime (Not the user directory, but the one off root)
    What you need is a file called AppleHDVCodec.component
    The latest is version 1.3.2 dated 5th November
    Update 2 installs this, but Update 1 wont install over the top as its a newer file.
    Download both Update 1 and 2 from Apple, then open the contents of both (Don't run them, click Show package contents in context menu)
    You need to unzip the gz files and you can copy out the above file. Do this for both files but keep them separate, you will need both.
    Put update 1 file in place first (Overwrite or backup your file in the location given at the top of this post ) then run SW update. It will recognise the version and ask to install Update 2 - Dont !
    Then grab the file from the update 2 gzip and copy this file over the one from update 1
    Then run SW Update again and it will say all is Ok and you dont need any updates
    Its a real mess, but works.

  • Pro Application Support 3.1 and 1.0 update

    The is New Pro Application Support
    for 10.4 users
    http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html
    for 10.3.9 users
    http://www.apple.com/support/downloads/proapplicationsupport31macosx1039.html
    the Pro Applications Update 2005-02 v1.0 can only be updated on Software update
    it'll be good idea if y'all update, I'm not sure what this one fixes but just like the last one, this one might also fix alot of problems
    p.s: Make sure you restart your mac and repair permission after installations for safety
    stash

    The reason that the audio objects got bigger when inserting a plug or assigning a group is that the audio object is not "one" size" you can actually change the the size of an audio object! Drag it 4 times the size and you'll receive a grey big and ugly fader:-) Theres little "headroom" if you want the fader to lookk like you're used to but the size is actually variable:-)
    Anyway it's great that the standard size is now not changing its size when instatiating:-)
    25G'S

  • My Mac book pro keeps saying "connection time out occurred" I have a 2011 pro with all the latest updates. It keeps doing it and it really annoys me! Please help!

    My Mac book pro keeps saying "connection time out occurred" I have a 2011 pro with all the latest updates. It keeps doing it and it really annoys me! Please help!

    Take each of the following steps that you haven't already tried, until the problem is resolved.
    Step 1
    Restart the router. Many problems are solved that way.
    Step 2
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 3
    From the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts.
    Step 4
    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 5
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 6
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.

Maybe you are looking for

  • Error during deploying *.ear to sap using ant

    I want to  deploy ear to sap with ant script,but it can not work.The error information as follows,can anybody give me some advice if you had the similar error,thanks. C:\usr\sap\LJ1\J00\j2ee\deployment\ant>ant -f example_build.xml deploy -v Apache An

  • Error when create UDS instance

    Dear All, I got an error message when creating UDS instance, the message is "Error:0x80040153 Invalid value for registry". The UDS server and OPC server is running on different windows PC. In the UDS Admin Console, I create a new OPC-DA instance. The

  • OOBEUnattended not applying.

    Hi all, unfortunatly all of my oobe scrips are not applying anymore with this line: [windeploy.exe] UnattendSearchExplicitPath: [C:\Windows\Panther\unattend.xml] does not meet criteria to be used for this unattend pass. is there someone that can see

  • Management of LR3.2 Versions on Computer?

    Greetings-   I posted this on another thread, but never received a response.  Now it seems to have been "lost" in the traffic for that previous thread!   Can someone clear this up for me so that I don't erase/remove the wrong program?   Thanks. Steph

  • TS1424 error code -1450

    i am having trouble when i try to download the last three tracks from the Annual 2014. every time i try to download them all i get is the message for example that says (149.9mb of 149.9mb - stopped err = -1450)