Pro cs3 not importing audio in avi files

ok it seems for some reason that my cs 3 is not importing audio in my avi files the video channel imports but no audio  anyone know a reason why this is please

AVI is but a "wrapper." This ARTICLE will give you much more background, plus direct you on finding out what is inside that wrapper.
It might be as simple as a setting change, but conversion will likely be the path to take.
Good luck, and let us know what G-Spot (in the article) tells you about that/those file(s).
Hunt

Similar Messages

  • Premiere Pro CC 2014 Does Not Import Panasonic GH4 Spanned Files as a Single Clip

    Premier Pro CC 2014 does not import Panasonic GH4 spanned files as a single clip. I have made a short video that shows the problem with the GH4 footage and it show how the Canon XA-10 footage imports correctly.
    Is this a known problem? Am I doing something wrong? It makes the Master Clip Effects in Premier Pro useless because every spanning fragment is turned into a master clip.
    Problem demonstration video: http://screencast.com/t/03wzQoxAUXAQ

    Jim,
    I've looked up all sorts of MP4/MOV comparisons on the web ... most conclude that mov is perhaps a bit "safer" on an Apple OS and mp4 "safer" on a PC and non-Apple "devices", but generally list the contents of the two as being nearly indistinguishable. I do realize the Qt has had ... issues ... within the Adobe programs, especially on PC's.
    You have any other good info? Always looking to learn from the more experienced ...
    Neil

  • Can't import .mp4 or .avi files

    I am unable to import .mp4 or .avi files into iMovie. I have iMovie3.0.3. I am able to import .mov files, but not the two listed above. Is this because i have an older version of iMovie or is it just not possible. I am new to using iMovie, but do understand something. Any help would be greatly appriciated.

    I am sure I didn't get iMovie 4, my powerbook is over 2 years old.
    http://img437.imageshack.us/img437/1526/imovie4at.png
    I figured it was just because I have an older version. I've known that I can convert the files in QT Pro, I just do not own it.
    I'm probably going to end up getting iLive 05.
    Thanks for your help.

  • Capturing audio from avi file

    I want to capture just the audio from avi file. Here is what I did. I dragged the avi into garage band and saw a separate audio and video track. I tried to import the just the audio into itunes but it would only let me import both video and audio. I decided to burn the audio to cd and then import it into itunes. This seemed to work but I would like to know if there is a better method. I figure there must be. Anybody out there tried this?

    i'm not near my GB machine to test this, but see if you can Share to Disk and make sure the Compress checkBox is not selected.

  • Lost audio from AVI file

    I have Quicktime PRO and need to edit some avi files. Upon opening up some DIVX files, I have lost the audio. Their is a prompt saying I need some plug ins and dropped me on the quicktime plugin page. I read through all the plug ins but I am not sure what the problem is.
    Does anyone know how I can bring back the audio in these files? Many thanks.
    Calvin

    i'm not near my GB machine to test this, but see if you can Share to Disk and make sure the Compress checkBox is not selected.

  • No longer audio on .avi files when attempting to use Elements 9

    I have compiled 20 years of videos from family videos and converted them to .avi files.  I now want to edit these files into other smaller videos to give to my children.  I have Premiere Elements 9.  When I get one of these files using PE9 there is no longer audio on them. 
    There is audio if I play them on Windows Media Player but no audio on Quicktime Player. 
    I can edit in Windows Movie Maker but not in PE9.
    The Quicktime Player states the following:
    Format: Motion JPEG Open DML, 640 x 480, millions
    Movie FPS 29.97
    Playing FPS 29.97
    Data Size 1.94 gb
    Data Rate 8.67 mbits/sec
    Normal Size 640 x 480 pixels
    Current Size 640 x 480 pixels
    I have a Dell Inspiron 530, 4.0 gb RAM, 32- Bit Windows Vista system.  Plenty of Hard Drive availability.
    I purchased PE9 because I thought it would be superior to Windows Movie Maker.  Very frustrated.

    Hi Bill,
    The .avi file is a compilation of videos from multiple cameras from over the years.  There is no 1 camera.  That is why I am confused here.
    Carmen
    Date: Wed, 7 Mar 2012 10:08:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: No longer audio on .avi files when attempting to use Elements 9
        Re: No longer audio on .avi files when attempting to use Elements 9
        created by Bill Hunt in Premiere Elements - View the full discussion
    What camera produced the MJPEG files, wrapped in the AVI container? The reason that I ask this, is because camera mfgrs. love to tweak CODEC's, and some take that tweaking to an extreme. If you have the utility disc, that came with the camera, it is probably best to install their particular version of the MJPEG CODEC. The Morgan, or the MainConcept might work OK, but having the exact version, from the camera mfgr. will get you as close, as is possible, and will save having to buy an MJPEG CODEC, that might not be perfect. Now, on that utility disc, one might have one of three possible choices: The MJPEG CODEC might be a separate installationThe MJPEG CODEC might install along with the camera's driverThe MJPEG CODEC might install with an included editing/cataloguing program (most common nowadays), and even if you do not use that utility, having the proper version of the MJPEG CODEC installed on the system, will get you as close, as is possible Good luck, and let us know if you have the utility disc for that camera. Hunt
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4251352#4251352
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4251352#4251352. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Premiere Pro Does Not Support Audio-Only Capture For Some Formats, Such As HDV?

    In the PPro CS 5.5 Help file  under, "Recording audio", it says:
    "Note: To capture an audio-only file from a digital video source, choose Audio from the Capture menu in the Logging pane of the Capture panel.
    "Premiere Pro does not support audio-only capture for some formats, such as HDV."
    I'm shooting in HDV and if I want to capture audio only, would I just need to switch my setting to DV?
    The only thing is my Canon HV20's HDV audio is MPEG-1 Audio Layer 2, 16 bit, 48 kHz.
    My DV setting is PCM audio, which I think is a better quality format, right?
    Would there be any noticeable difference?
    Thanks.

    Capture your HDV material in the normal way and just drag audio only from the source monitor to the timeline.

  • How can I batch replace audio in .avi files without re-encoding?

    I have hundreds of .avi files that have two audio channels. One channel contains the audio from the original video footage, and the other channel contains speech-shaped noise that was added later.
    I need to replace the speech-shaped noise with a different type of noise (multi-talker babble) without re-encoding the video and degrading its quality. I would like to be able to do this in a batch process if possible. Do any of you have an idea about how to approach this in Premiere Pro?
    Some more details: each .avi file is about 2-3 seconds long, so I would need the replacement noise to be the same length as the original noise.
    Any advice would be greatly appreciated.

    Using -replace:
    $strings = @(
    "Karaoke A Spoonful Of Sugar - Mary Poppins -_fwCVHtOQUk",
    "Karaoke Ain't No Stoppin' Us Now - McFadden & Whitehead -kzh0Df42vms",
    "Karaoke Ain't Nobody - Chaka Khan -qDP3_jInyl0",
    "Karaoke A Tisket, A Tasket - Ella Fitzgerald -amgeW6HqaVo"
    $strings -replace 'Karaoke (.+) - (.+) -.+','$2 - $1'
    Mary Poppins - A Spoonful Of Sugar
    McFadden & Whitehead - Ain't No Stoppin' Us Now
    Chaka Khan - Ain't Nobody
    Ella Fitzgerald - A Tisket, A Tasket
    [string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

  • Premiere Pro CS6 not playing audio on imported MP4 files.

    I am editing a series of MP4 clips shot with a Canon Vixia, and for some reason, Premiere Pro CS6 will not play the audio on a few of the imported files. All of the clips were videotaped with the same camera. I know that there is audio on the clips in question, because it works fine when they are opened in Windows Media Player. I have deleted and reimported the faulty files, to no avail. I noticed in the online discussions that several others have had this problem; but I haven't been ablet o find an online fix thus far. I would greatly appreciate advice on this!

    I have a Canon Vixia HFS100, which saves AVCHD files to an SD card... exactly what model is your camera?
    If you are copying from an SD card to your hard drive, read these two links
    Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
    -and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

  • Premiere pro will not import .mov files

    Premiere pro CS3 running on Vista 64 bit will not import .mov files. After Effects CS4 has the same problem, it says I don't have the correct version of Quick Time installed. I'm using the 64 bit version 7.6.4 for Vista. Any help would be appreciated.

    Welcome to the forum.
    Now, what is inside that .MOV "wrapper?" This ARTICLE will give you some background on "wrappers." It is mainly written with .AVI in mind, but translates to most AV file formats, including .MOV.
    Now, I use a lot of .MOV files and these are all done in the Animation CODEC. Never an issue for me.
    One thing that might aid you is the US$30 upgrade/unlock key to QT Player Pro. It can Export as a bunch of useful formats/CODEC's. Depending on whether your footage is SD, or HD, you can Export most to formats that play perfectly with PrPro.
    Good luck,
    Hunt

  • My itunes can not import or add AVI movie files created by Canon PS SD450.

    How can I play my movie shot by Canon PS SD450 on my new iPOD? My itunes (7.0216) can not import or add the AVI movie file to its library. Please advice.
    Laptop Fujitsu S2110   Windows XP Pro   Canon PowerShot SD450 movie file (AVI)

    I am having the same issue so if anyone knows how to fix it that would be great.

  • M2t files not importing audio.

    Hi
    I split a clip in Prem. Elements 7 into 2 parts and encoded them into m2t files.
    When I test both clips in Windows Mew\dia Player both play fine - video & audio.
    BUT when I import both into Prem CS5 only one clip had audio?
    How can I get the other one to import audio too, like the first? It is there because I can hear it correctly in Media [player?
    Thanks  Vince

    When it plays in WMP it does not automaticly mean that it will play in Premiere.
    Do these clips play in Elements?
    What if you do not split the clip and bring it straight into CS5.
    What is the source of that clip?
    What are the export settings Elements?

  • No audio for avi files in Quicktime

    Hi, like many others I'm having difficulty trying to restore audio to avi videos. It seems to be a codec related problem but I'm not sure.
    My Quicktime folder contains:
    AC3 MovieImport.component
    AppleIntermediateCodec.component
    Flip4Mac WMV Export.component
    Flip4Mac WMV Import.component
    Perian.component
    Is there another codec I need or do I need to delete one or more I already have?
    Any help would be much appreciated

    But then why has Quicktime played these avi video files with audio in the past? What has happened to the audio data? It's been mentioned by some that problems like this occurred after the 7.5 Quicktime update?
    Frankly, I leave that up to you to find out. However, here are the logical options as I see them:
    1) The inspector is not seeing any audio because there is none.
    1a) If the files never played audio, then it never contained any audio in the first place.
    1b) If the files previously played and currently do not, then
    1b1) Either you converted or deleted the audio content (check the "Properties" window if you have QT Pro or use either the Finder "Get Info" or another application to re-check for an audio track)
    1b2) Updating QT or the addition of another codec has created a component conflict and you will have to run a conflict test to discover where the problem lies. Basically, updating the QT structure or adding a new component can alter the order that the QT Player/QT applications may call components. In some cases the components may "argue" over which component should be used. In other cases, the component being called first may be in conflict with another installed component whereas the previously "first called" component did not. (I.e., see hoodstar's recent "SALVATION" revelation comment regarding the same problem.)

  • Premiere Pro CC not playing fair with .mov files

    I have a CC account and use Premiere Pro on my PC with no issues so far except that the RAM and Graphics card suck. So I decided to run on my laptop running windows 8 rather than 7.
    AE runs with no issues (so far), but when I use Premiere Pro it does not like .mov files for some reason.
    I imported files from my iPad and it gives me this message:
    Error Message
    "The FIle Has no Audio or Video Streams"
    To work around it for now, I converted the file into mp4 and imported to edit from there. Now issue is that we need to place a lower third. I have an AE project as the .mov file imports into that no problem, but when I then export as quicktime file for the alpha channel it still will not import into Premiere Pro, same error message.
    I can export as .avi but then the file screams 'MASSIVE' as it is over 1.5gb cpmpared to the 32mb as a .mov file.
    Bottom line, cannot get any .mov to import into PP on my laptop even though it works fine on my PC. Also, .mov files play fine in AE??
    Please HELP
    Martin

    Hi MartinSalteruk,
    Thanks for contacting Adobe Forums,
    As I understood you are only getting issues with .mov files, Please check if you Quicktime player installed on the system.
    if not click here to download the Quicktime player
    Regards,
    Sandeep

  • Bridge CS3: Not importing clips into Premiere CS3

    One of the videos on the Adobe site shows someone right-clicking a movie (MOV, I think) and choosing the option to "Open with Premiere Pro CS3".
    I created a blank test Premiere CS3 project. From Bridge, if I right-click an AVI and choose to "Open with Premiere Pro CS3", focus switches to Premiere, but no clip is imported.
    I'm using Windows Vista.
    Any ideas on this one?

    Jim, I *am* using Bridge CS3. Version 2.1.0.100
    Windows Vista Ultimate
    Eddie, yes the video tutorial shows how to open MOV video clips from Bridge CS3 into Premiere. My source clips are Windows AVIs. When I right click a clip in Bridge CS3 and choose the option to open with Premiere (actually the option is "Open With > Adobe Premiere Pro"), Premiere Pro CS3 gets focus (or opens if it's not already open), but no clip is imported.
    Interestingly, I got hold of a sample MOV file (CheeziPuffs.mov that appears in the Adobe samples). When I right-click that file in Bridge, I am only given the option to open with QuickTime player. Premiere does not even feature as an option in the context menu.
    When I ran up Bridge for the 1st time followin Premiere Pro CS3 and Encore CS3 installation, it popped up a dialog box and said that the new programs had been detected and did I want to register them with Bridge (or words to that effect), which I did. So far, so good. But my AVIs just plain won't open in Premiere when I ask Bridge to do so.

Maybe you are looking for

  • I need help downloading previously purchased apps

    i can see all my purchased apps in my itunes account BUT there is no option for me to redownload a few apps, and movies... most of my purchased items were synced over when i got my 4th gen but i noticed that a few of the very first items i purchased

  • File Dialog Box often takes a long time to execute

    Hi all The Labview File Dialog Box Express VI sometimes takes 5 to 10 seconds to execute. On other occasions, it executes in a blink of an eye. Why is that so? I have tried to use the older Open/Create/Replace File VI as suggested in one of the forum

  • Only on value field in COPA gets values from SD

    Hi, I created two value fields for COPA. I assigned one of them to the condition VPRS (a cost) which works properly. The other condition, assigned, VKP0 doesnt appear in the COPA-document. We are using record type F. But when I ran an flow analysis I

  • I have a new Mac Pro and it seems to get hot...why?

    I'm new to Apple products and I have a MacBook Pro and it seems to get very hot.  Am I doing something wrong with it?

  • Can't copy text in a preview-document opened in Safari.

    Since the last upgrade of safari (I think) I can't copy text in a preview document opened in Safari. Can I adjust anything in the preferences or is there any other solution to get the normal behaviour back?