Pro Video Editing Programs Alternatives for Final Cut

Hey I like to shot and edit movies in my spare time and Ihave a 2006 Macbook and I've tried to install Final Cut Pro X and Final CutStudio 3 only to find unsucessfully that my computer doesn't support them. So Myquestion Are there any good video editing program out there besides the FinalCut Series and Imovie which I have?

You may want to look at Avid's Media Composer. Our facility uses Adobe products. For editing, we're currently using Final Cut Studio 3. At the moment, we're "waiting it out" for the next best choice.
Ryan Salazar
Post Production Engineer
http://www.ryansalazar.net

Similar Messages

  • What other programs are for Finale Cut Pro

    What other programs are for Finale Cut Pro?
    Like added transisions and such.

    Start out here where you'll find tons of top quality FREE plugins made by some very creative folks.
    http://www.fcp.co/forum/9-free-fcpx-plugins-and-templates
    The only "must-have" plugins I'd recommd are "Slice X" by CoreMelt, and "Nattress Levels & Curves" from Noise Industries (FX Factory).
    Everything else is just eye candy.
    I advise my students to not buy plugin until you actually need them for a paying job, and have that work pay for it.

  • TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

    I have edited a movie in Final Cut Pro and the video has been smooth all the time.
    Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
    What is wrong? All the sudden.

    We need info, info, info!
    What version of FCP X?
    Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
    It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
    Try exporting a master file and see if the video is ok.
    Also, keep Activity Monitor open and see how much memory pressure you've got.

  • Flash Video Exporter plugin for FInal Cut Pro

    Does anybody know how to install the Flash Video Exporter
    plugin for Final Cut Pro so it shows up as an option in FCP?
    I want to create FLVs directly from FCP.
    Thanks

    http://www.adobe.com/devnet/flash/articles/flv_exporter_03.htm
    Scroll Down - its about mid page
    This is on the intro page:
    Note: You must have Flash MX Professional 2004 installed on
    your machine to use the Flash Video Exporter with your video
    editing application. The only exception is using the exporter in
    Demo Mode.

  • WHAT IS THE BEST VIDEO CARD FOR FINAL CUT PRO and MOTION?

    Hello folks,
    I have found a lot of posts regarding all kinds of troubles with ATI READEON X1900 video card.
    When I talked to people from Apple, trying to decide which videocard to install in new MAC PRO, Ati Radeon X1900 was the one they did recommand for FCP and Motion. So are there any other cards which would actually suite better for Final Cut Studio2, or is Ati Radeon X1900 really the one to go with?
    Thanks for any suggestions,
    Kootenay

    Techreport has some more information on the new 55nm Radeon (X3000) which should be another "mid November" releases, as well as an updated 8800 GT that still is under wraps.
    So seems Intel and everyone else is trying to get new products out before the end of the year, if possible.
    Drivers for graphics controllers may or may not need the work that sometimes seems to plague companies.

  • Why is there no disc for Final Cut Pro X, is there one coming, and how do I transfer the program to a new machine from the download?  Thanks!

    Hello:
    Why is there no disc for Final Cut Pro X?
    Is there one coming?
    Can and how do I move the downloaded application from my old machine to a new computer?
    Thanks!

    You purchase FCX in the Mac App Store, there is no disc. You can reload past purchases under your account within the app store. You should also be regularly backing up your system

  • I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

    I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

    The only way that would work out is if you ran exactly the versions that were made for old PowerBooks. Anything newer may require Intel and not run, or will strain the poor old G4 CPU.
    Your needs have to be modest, too, because the problem with older music and video software is that they are not current as far as formats and codecs for the Web. If you want to output H.264, the current standard for YouTube/Flash video, older software may not support it, and in addition, H.264 is processor-intensive and is tailor-made for today's multi-core, 2+ GHz processors. It will overwhelm a G4. A PowerBook G4 can barely play YouTube videos.
    More perspective: The PowerBooks worked great for miniDV format editing. In other words, 480i SD/standard definition video in use from the late 1990s to the late 2000s. If that is all you want to do, edit tape from an old miniDV camera to SD output, then OK.
    But if you want to edit today's HD video, whether 720p from a snapshot camera/iPhone 4 or 1080p from a DSLR, the PowerBook and the software for it will either not recognize AVCHD/H.264, or it will slow the PowerBook to a dead crawl.
    I'm in agreement with the above: Intel Macs have been out for so many years that getting a used one is a much better deal than a dead-end PowerBook. And I loved (still love) my PowerBooks.

  • NO image , just sound - also for Final Cut Pro users

    Hey everybody!!
    I am editing a movie on Final Cut Pro, and I use Quick Time 7.1 to capture the clips and source them to FCP. The type of recorder I am using is an HDV, and up to a couple of days ago, things ran smoothly.
    Then I started having problems with my Mac, of a different kind, and I had a friend of mine RESTORE my system. After that, I can't work on my film anymore, cause the Quick Time files from Capture Scratch only play sound, and have a blank screen. Every time I try to open them a window box appears, telling me that Quick Time is missing some components, and cannot play the clips properly. I tried downloading most of these programms, like Divx and On2, but the clips still can't play. I also tried erasing and re-installing Quick Time, but this doesn't seem to work either.
    I must have edited and delivered this video by tommorow, so what do I do??
    Please advise.
    Thanks.
    Stef.

    After that, I can't work on my film anymore, cause the Quick Time files from Capture Scratch only play sound, and have a blank screen.Sounds like you have "lost" your HD video component package. Try re-installing FCP (or specifically the HDV, AppleIntermediate, and/or DVCPRO HD components depending on "Easy Set-Up" option used for capture).

  • Following Media Files Are Not Optimized For Final Cut Pro

    I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
    I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
    1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
    2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
    I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
    Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
    Thank you,
    Crayton

    I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
    I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
    - I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
    - I rendered them in Premiere, then transfered the rendered AVI file to FCP.
    - When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
    - Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
    - Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
    Did that make sense?
    Thank you again,
    Crayton

  • What is the best workflow for Final Cut Pro X across multiple computers?

    I travel on a team that is in a different location every week, so all of our video editing has to be fairly moble. We have 3 macbook pros and would like to use final cut X on all of them. What would be the best workflow for us all to work on the same project and sync it across the computers? (eg, one of us editing the footage, one editing the sound, one working on visual effects?)

    My first question would be how well 5.1 would work with SL. People have reported problems.
    As far as cameras are concerned, I would guess most any tape-based camera would work and so much depends on the kind of projects you work on that I wouldn't want to start guessing at your needs.
    If you want broad access to tapeless and advanced formats try to locate and purchase an upgrade disk to 6 or 7.
    Good luck.
    Russ

  • Editing .AVI files in Final Cut Pro 5

    I am trying to edit .AVI files on Final Cut Pro 5 on a volunteer basis.
    I have converted the files to .MOV files with Quicktime Player.
    I am able to import one of these files into Final Cut Pro 5, and can even watch it in the viewer.
    But when I place it in the Sequence tab to edit it, I get a screen that says "UNRENDERED" for the whole clip.
    Based on past experience, the video would be harder to edit in a rendered state.
    Any advice on how to edit .AVI files would be much appreciated.

    AVI files are quite similar to some .mov files, but the devil is in the details (so to speak.)
    You don't give any particulars, so I'm going to assume you're working with standard definition NTSC video. Additionally, I'll assume that your system is PowerPC Mac since only FCP 5.1 and higher supports Intel processors.
    FCP uses sequence presets that spell out the parameters for the timeline. If a clip is dissimilar or acquires enough filters to be functionally dissimilar,the timeline will become red for that portion of the timeline. The same is true for the audio portion of the clip.
    The terms "QuickTime" and ".mov" (and probably ".AVI" for that matter) are kicked around as if they are specific but in fact they are quite vague. It's like saying you have a Ford; without any additional info like model and year,  it's hard to get down to cases.
    Use Compressor or QuickTime Pro to convert your footage to DV/DVCPRO-NTSC (if it's SD and you're in North America) and make sure the audio is converted to 48KHz/16-bit. This should match the NTSC presets and your timeline should a "cool" color (dark blue to light green) and playback nicely.
    Depending on the amount of processor power your system has, you may be able to play back clips with filters or even two or more layers of video without rendering. To be frank, don't count on it because someone has had well over 5 years to upgrade the system and hasn't so it may be "peaked out" already. You can usually step through the timeline using the arrow keys or by rendering short segments if you practice good "timeline hygiene" i.e., keep the timeline as clean as possible, don't strew clips over many video layers and let them stack up.
    That should get you going, I strongly recommend you take a little time to read the help docs/// they actually can help.
    Good luck!

  • New Canon EOS Movie Plug-in-E1 for Final Cut Pro

    Just thought your would like to know. From canonrumors.com
    http://www.canonrumors.com/2011/04/canon-updates-e1-plugin-for-fcp/
    Canon today announces the latest update for EOS Movie Plug-in-E1 for Final Cut Pro – the company’s custom-developed software application that provides quicker and easier editing of EOS Movie footage in Apple’s Final Cut Pro software suite.
    Launching to coincide with the start of the 2011 National Association of Broadcasters (NAB) Show in Las Vegas, EOS Movie Plug-in-E1 for Final Cut Pro version 1.2 will make the importing of EOS Movie files even easier, allowing users to transfer files from any folder, without needing to mirror the folder structure on the camera itself.
    The update also enables smoother importing from Canon’s EOS 7D, EOS 5D Mark II and EOS-1D Mark IV models, allowing users to import footage without requiring the THM file generated by the camera.
    Originally launched in February 2010, EOS Movie Plug-in-E1 for Final Cut Pro is designed to quickly and seamlessly convert EOS Movie footage from Canon’s leading range of EOS DSLR cameras to Apple’s high-quality ProRes 422 codec. The plug-in allows users to convert footage at approximately twice the speed of Apple’s standard conversion, creating a smoother workflow for the rapidly growing number of videographers shooting HD video content on DSLR cameras.
    EOS Movie Plug-in-E1 for Final Cut Pro version 1.2 will be available to download for free from 25th April 2011.

    And I just spent over an hour yesterday explaining to a client how utterly essential it was to maintain the exact folder structure for proper log & transfer:/
    If I say that once a day to students, I say it a thousand times.
    On top of that I just started Carbon Copy Clone today with all my updates in my editing lab. Not the end of the world but it's a little time consuming on 80 stations. Oh well.

  • An Excellent Tutorial for Final Cut Pro X

    I am fairly new to Mac and I am learning Aperture and Final Cut Pro X.
    Just wanted to share an excellent video tutorial for Final Cut. Its free but there is an "extended edition" of sorts for a reasonable price.
    http://www.izzyvideo.com
    Cheers!

    I thought there would be some plugins for Quicktime, like Final Cut studio, which made from Quicktime---> Quicktime Pro. And under Final Cut Studio there was also some Protoolkit installed. No longer necessary?
    I just want to be 100% sure, that FCP X and Motion 5 is a completely self-contained app, that need no installation. But up to now, nobody can tell me  100% if it really is so.
    I thank you for your answers and hope that you understand my thoughts, about having a Dvd where I can install it from or where I can save the self-contained app, if it is so.

  • Can I add a secondary location for Final Cut Pro Documents?

    Hi Guys,
    I'm working on a large project which has taken up most of my 2tb hard drive which I use for my final cut pro documents (capture scratch, render files etc). Is it possible if I plug in another hard drive to use that as a secondary location for final cut pro documents as I have other (smaller) projects which I could be uploading and working on in the mean time? If so, how is this achieved and what are the pros / cons?

    Sure -- go to Final Cut Pro menu on your menu bar and select System Settings.
    The first tab is SCRATCH DISKS -- that's the term too -- not secondary folder for FCP Documents.
    Change it there.
    Drawbacks...
    It has been a while since I've had to deal with this, but FCP used to not remember (feature or bug??) a project's original scratch disk location and if you change it for ONE project it will be changed for ALL future AND past projects... until you change it back.
    Now, that in itself isn't a BAD thing. All that that means is that if you continue to capture material into that old project it will now put it over here instead of over there. Also, other things like render files and such which won't really matter much unless they do... and now you've got stuff spread over a coupla drives.
    FCP's projects don't care. They've already mapped where they need to go to get the video and render files it needs. Move your Scratch Disk 33 times... won't make a difference to the browser and timeline. -- UNTIL you remove one of the important drives. THEN red lines galore! Un renders, missing files... messy messy messy!
    Much better to start and finish a project in scratch disk. Makes for easy cleanup. Kinda like cooking thanksgiving dinner (American??) in 5 houses at once.
    Good luck,
    CaptM

  • How can I convert avi file to mov file for final cut pro?

    Hi
    I have source files which are captured by Canous Edious system.
    I want to edit these files on final cut pro 5.1, However, I got the audio but no image at all. Although I tired to use Discreet Cleaner 6.5 in my apple computer, it did not work. What sall I do with this problem?
    Someone told me that it should work with Cleaner, so I purchased.
    Is there any special setting for Cleaner?
    If anyone knows about this, plseae let me know.
    thanks you .
    system G5 2.3/4.5GB Final cut ST 5.1
    Discreet Cleaner 6.5

    This may assist:
    http://www.divx.com/divx/mac/?hp3macmoreinfo

Maybe you are looking for