Prob in alv report

hi all,
I hav prob in alv report .I made a purchse register alv report.when I see output it show's everything right but in printpreiew and when transfer to spreadsheet. It cut's back part of voucher number.for ex.v.no :5100021 but see in print priew itshow's like this 51000... and in excel sheet it cut down the last no. so it creates rundancy of voucher no. plz tell me sol. I don't know wat is happening.
regards,
hemlata

hi hemlata.
you can do this for the voucher number in your fieldcat.
give the outputlen as the maximum outputlength of the voucher no.
fieldcat-fieldname = 'VOUCHER'.
fieldcat-...
fieldcat-NO_ZERO = 'X'.
append fieldcat to it_fieldcat.
and now check it.
Regards
vijay

Similar Messages

Header prob. in ALV report

Hi All,
Hope you all are doing fine!!!
In the below program am trying to print the top-of-page/header in alv report,,but am unable to do it..
Am working on 4.6c version,,,,,its working fine in ECC 6.0 but i really dont understand why its not working in 4.6c...AM JUST PASTING THE ALV PART...!!!
Pls. do the needful
REPORT yjack LINE-SIZE 132
 LINE-COUNT 65
 NO STANDARD PAGE HEADING.
DATA: /sie/swe_ag0_rdo TYPE /sie/swe_ag0_rdo,
 wa_tvko TYPE tvko,
 /sie/swe_ag0_raa TYPE /sie/swe_ag0_raa,
 wa_kna1 TYPE kna1,
 wa_t001 TYPE t001,
 wa_tvkot TYPE tvkot,
 /sie/swe_ag0_con TYPE /sie/swe_ag0_con,
 /sie/swe_ag0_r02 TYPE /sie/swe_ag0_r02.
TYPES: BEGIN OF ty_itab,
 bukrs TYPE /sie/swe_ag0_rdo-bukrs,
 vkorg TYPE /sie/swe_ag0_rdo-vkorg,
 zclpr TYPE /sie/swe_ag0_rdo-zclpr,
 zcdaz TYPE /sie/swe_ag0_rdo-zcdaz,
 vbeln TYPE /sie/swe_ag0_rdo-vbeln,
 posnr TYPE /sie/swe_ag0_rdo-posnr,
 vbtyp TYPE /sie/swe_ag0_rdo-vbtyp,
 zidag TYPE /sie/swe_ag0_rdo-zidag,
 zimpp TYPE /sie/swe_ag0_rdo-zimpp,
 zimco TYPE /sie/swe_ag0_rdo-zimco,
 zimmg TYPE /sie/swe_ag0_rdo-zimmg,
 fkdat TYPE /sie/swe_ag0_rdo-fkdat,
 zstre TYPE /sie/swe_ag0_rdo-zstre,
 vtweg TYPE /sie/swe_ag0_rdo-vtweg,
 kunrg TYPE /sie/swe_ag0_rdo-kunrg,
 END OF ty_itab.
TYPES: BEGIN OF ty_itab2,
 bukrs TYPE /sie/swe_ag0_rdo-bukrs,
 vkorg TYPE /sie/swe_ag0_rdo-vkorg,
 zcdaz TYPE /sie/swe_ag0_rdo-zcdaz,
 fkdat TYPE /sie/swe_ag0_rdo-fkdat,
 vbeln TYPE /sie/swe_ag0_rdo-vbeln,
 zimpp TYPE /sie/swe_ag0_rdo-zimpp,
 zimco(5) TYPE p DECIMALS 2,
 zimmg(5) TYPE p DECIMALS 2,
 resid(6) TYPE p DECIMALS 2,
 kunrg TYPE /sie/swe_ag0_rdo-kunrg,
 name1 TYPE kna1-name1,
 END OF ty_itab2.
type-pools: slis.
types: begin of ty_final,
 bukrs type char29,
 vkorg type char24,
 mese type char17,
 gjahr type gjahr,
 agent type char45,
 vbeln type vbeln,
 fkdat type fkdat,
 zimpp type /SIE/SWE_AG0_ZIMPP,
 zimco type /SIE/SWE_AG0_ZIMCO,
 zimmg type /SIE/SWE_AG0_ZIMMG,
 resid(5) TYPE p DECIMALS 2,
 kunrg type kunrg,
 name1 type NAME1_GP,
 end of ty_final.
data: it_final type table of ty_final,
 wa_final type ty_final,
 g_bukrs(29) type c,
 g_vkorg(24) type c.
data: it_fieldcat type slis_t_fieldcat_alv,
 it_layout type slis_layout_alv,
 it_list_top_of_page type slis_t_listheader,
 it_events type slis_t_event,
 wa_events type slis_alv_event,
 it_headings type slis_t_listheader,
 wa_headings type slis_listheader.
constants: c_h type c value 'H',
 c_s type c value 'S'.
field-symbols: <fs_final> type ty_final.
DATA: it_itab TYPE TABLE OF ty_itab,
 it_itab2 TYPE TABLE OF ty_itab2,
 wa_itab TYPE ty_itab,
 wa_itab2 TYPE ty_itab2.
DATA: wa_app TYPE ty_itab.
DATA: w_var TYPE c VALUE '1',
 w_com_mese(9) TYPE c,
 w_flag_st TYPE c.
$$ Selection-screen
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK parametri WITH FRAME TITLE text-001.
BEG MOD ESX00596 IMS:100276414 TR:SWIK9A04W7 11.04.2007
*PARAMETERS: p_bukrs LIKE /sie/swe_ag0_rdo-bukrs OBLIGATORY.
*PARAMETERS: p_vkorg LIKE /sie/swe_ag0_rdo-vkorg OBLIGATORY.
PARAMETERS: p_bukrs TYPE /sie/swe_ag0_rdo-bukrs OBLIGATORY.
PARAMETERS: p_vkorg TYPE /sie/swe_ag0_rdo-vkorg OBLIGATORY.
SELECT-OPTIONS: s_zcdaz FOR /sie/swe_ag0_rdo-zcdaz OBLIGATORY
 MATCHCODE OBJECT /sie/swe_ag0_zaa.
PARAMETERS: mese(2) TYPE n OBLIGATORY,
 anno TYPE /sie/swe_ag0_rdo-gjahr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK parametri.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: c1 AS CHECKBOX.
SELECTION-SCREEN COMMENT 8(31) text-006 FOR FIELD c1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK b1.
DATA: w_cd_a TYPE /sie/swe_ag0_rdo-vtweg,
 w_cd_gen TYPE /sie/swe_ag0_rdo-vtweg,
 w_cd_di TYPE /sie/swe_ag0_rdo-vtweg,
 w_cd_re TYPE /sie/swe_ag0_rdo-vtweg,
 w_cd_te TYPE /sie/swe_ag0_rdo-vtweg,
 w_cd_ca TYPE /sie/swe_ag0_rdo-vtweg.
INITIALIZATION.
PERFORM selezione_hard_coding.
$$ At selection-screen
AT SELECTION-SCREEN.
PERFORM controlli.
$$ Top-of-page
TOP-OF-PAGE.
PERFORM top_of_page.
$$ Start-of-selection
START-OF-SELECTION.
perform build_events.
PERFORM carica_itab.
PERFORM carica_itab2.
PERFORM stampa.
END-OF-SELECTION.
IF C1 EQ 'X'.
perform fill-fieldcatalog.
perform display_alv.
ENDIF.
*& Form fill-fieldcatalog
 text
--> p1 text
<-- p2 text
form fill-fieldcatalog.
data: l_fieldcat TYPE slis_fieldcat_alv.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'BUKRS'.
 l_fieldcat-col_pos = 1.
 l_fieldcat-seltext_l = 'Company'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'VKORG'.
 l_fieldcat-col_pos = 2.
 l_fieldcat-seltext_l = 'Comm. Organization'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'MESE'.
 l_fieldcat-col_pos = 3.
 l_fieldcat-seltext_l = 'Month'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'GJAHR'.
 l_fieldcat-col_pos = 4.
 l_fieldcat-seltext_l = 'Year'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'AGENT'.
 l_fieldcat-col_pos = 5.
 l_fieldcat-seltext_l = 'AGENT'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'VBELN'.
 l_fieldcat-col_pos = 6.
 l_fieldcat-seltext_l = 'Invoice'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'FKDAT'.
 l_fieldcat-col_pos = 7.
 l_fieldcat-seltext_l = 'Date'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'ZIMPP'.
 l_fieldcat-col_pos = 8.
 l_fieldcat-seltext_l = 'Taxable'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'ZIMCO'.
 l_fieldcat-col_pos = 9.
 l_fieldcat-seltext_l = 'Tot.Comm.'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'ZIMMG'.
 l_fieldcat-col_pos = 10.
 l_fieldcat-seltext_l = 'Settle'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'RESID'.
 l_fieldcat-col_pos = 11.
 l_fieldcat-seltext_l = 'Accruing'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'KUNRG'.
 l_fieldcat-col_pos = 12.
 l_fieldcat-seltext_l = 'Cust.Code'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
 l_fieldcat-tabname = 'IT_FINAL'.
 l_fieldcat-fieldname = 'NAME1'.
 l_fieldcat-col_pos = 13.
 l_fieldcat-seltext_l = 'Company Name'.
 APPEND l_fieldcat TO it_fieldcat.
 clear l_fieldcat.
endform. " fill-fieldcatalog
*& Form display_alv
 text
--> p1 text
<-- p2 text
form display_alv.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = sy-repid
 I_CALLBACK_TOP_OF_PAGE = 'PRINT_HEADING'
 IS_LAYOUT = it_layout
 IT_FIELDCAT = it_fieldcat
 IT_EVENTS = it_events
TABLES
 t_outtab = it_final
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " display_alv
*& Form build_events
 text
 -->P_IT_EVENTS[] text
form build_events.
clear wa_events.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
 I_LIST_TYPE = 0
IMPORTING
 ET_EVENTS = it_events.
read table it_events into wa_events with key name = 'TOP_OF_PAGE'.
if sy-subrc eq 0.
wa_events-form = 'PRINT_HEADING'.
modify it_events from wa_events transporting form
 where name = 'TOP_OF_PAGE'.
endif.
endform. " build_events
form PRINT_HEADING.
clear wa_headings.
wa_headings-typ = 'H'.
wa_headings-info = 'DEMO FOR ALV!!!'.
append wa_headings to it_headings.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 it_list_commentary = it_headings.
endform.
Thanks n Regards
Jack

Hi friend,
I think u have to remove below lines in your program because FM 'REUSE_ALV_GRID_DISPLAY' will call directly Form 'PRINT_HEADING' for TOP-OF-PAGE event through table 'it_events' :
Remove lines:
 TOP-OF-PAGE.
 PERFORM top_of_page.
Also remove the parameter
I_CALLBACK_TOP_OF_PAGE = 'PRINT_HEADING' in FM 'REUSE_ALV_GRID_DISPLAY'
Also put a breakpoint in your program in the line,
START-OF-SELECTION.
perform build_events.
See whether 'form' 'name' gets populated in table 'it_events' or not.
See sample report and compare.
REPORT zawi_assign3 NO STANDARD PAGE HEADING.
TYPE-POOLS: slis.
DATA: BEGIN OF gt_outtab OCCURS 0.
 INCLUDE STRUCTURE ekpo.
DATA: END OF gt_outtab,
 gs_layout TYPE slis_layout_alv,
 g_exit_caused_by_caller,
 gs_exit_caused_by_user TYPE slis_exit_by_user,
 g_repid LIKE sy-repid.
DATA:
 gt_events TYPE slis_t_event,
 gt_list_top_of_page TYPE slis_t_listheader,
 g_status_set TYPE slis_formname VALUE 'PF_STATUS_SET',
 g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
 g_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
 g_top_of_list TYPE slis_formname VALUE 'TOP_OF_LIST',
 g_end_of_list TYPE slis_formname VALUE 'END_OF_LIST'.
DATA: gs_variant LIKE disvariant,
 g_save.
INITIALIZATION.
g_repid = sy-repid.
PERFORM layout_init USING gs_layout.
PERFORM eventtab_build USING gt_events[].
gs_variant-report = g_repid.
g_save = 'X'.
START-OF-SELECTION.
PERFORM select_data TABLES gt_outtab.
END-OF-SELECTION.
PERFORM comment_build USING gt_list_top_of_page[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_background_id = 'ALV_BACKGROUND'
 i_buffer_active = 'X'
 i_callback_program = g_repid
 i_structure_name = 'ekpo'
 is_layout = gs_layout
 i_save = g_save
 is_variant = gs_variant
 it_events = gt_events[]
 IMPORTING
 e_exit_caused_by_caller = g_exit_caused_by_caller
 es_exit_caused_by_user = gs_exit_caused_by_user
 TABLES
 t_outtab = gt_outtab
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc = 0.
 IF g_exit_caused_by_caller = 'X'.
 ELSE.
 IF gs_exit_caused_by_user-back = 'X'.
 ELSE.
 IF gs_exit_caused_by_user-exit = 'X'.
 ELSE.
 IF gs_exit_caused_by_user-cancel = 'X'.
 ELSE.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
ELSE.
ENDIF.
FORM select_data TABLES rt_outtab LIKE gt_outtab[].
SELECT * FROM ekpo INTO CORRESPONDING FIELDS
 OF TABLE rt_outtab
 UP TO 00030 ROWS.
ENDFORM. "SELECT_DATA
FORM layout_init USING rs_layout TYPE slis_layout_alv.
rs_layout-detail_popup = 'X'.
rs_layout-edit = 'X'.
ENDFORM. "LAYOUT_INIT
FORM eventtab_build USING rt_events TYPE slis_t_event.
*"Registration of events to happen during list display
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = rt_events.
READ TABLE rt_events WITH KEY name = slis_ev_top_of_page
 INTO ls_event.
IF sy-subrc = 0.
 MOVE g_top_of_page TO ls_event-form.
 APPEND ls_event TO rt_events.
ENDIF.
ENDFORM. "EVENTTAB_BUILD
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 i_logo = 'ENJOYSAP_LOGO'
 it_list_commentary = gt_list_top_of_page.
ENDFORM. "TOP_OF_PAGE
FORM comment_build USING lt_top_of_page TYPE
 slis_t_listheader.
DATA: ls_line TYPE slis_listheader.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = text-100.
APPEND ls_line TO lt_top_of_page.
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'Program'.
ls_line-info = sy-repid.
APPEND ls_line TO lt_top_of_page.
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'User'.
ls_line-info = sy-uname.
APPEND ls_line TO lt_top_of_page.
ENDFORM. "COMMENT_BUILD
Might solve your problem.
Thanks.
Edited by: Sap Fan on Feb 20, 2009 9:50 AM
Edited by: Sap Fan on Feb 20, 2009 9:52 AM
Edited by: Sap Fan on Feb 20, 2009 9:54 AM

Download prob in ALV report

Hi,
While downloading the data from the ALV report the last few columns are coming on next line when data is more.
Wht should i do?? Pl help..
Regards,
Rushikesh

Hi,
I have faced the same kind of problem but not with downloading , while uploading the excel file to SAP. The problem is that, If the line of excel sheet exceed 4096 characters, it used to take the remaining first line as a second line. Whatever be th FM, the same problem will come up I hope, because I_TAB_RAW_DATA field of a FM is of type : types truxs_t_text_data(4096) type c occurs 0.
-SatyaPriya

ALV Report: How to pass the variable in Work area to the FM ? Please help !

I want to pass the field in the work area which contains the floating point numbers to FM 'FLTP_CHAR_CONVERSION_FROM_SI'. This the correct FM, I have tested.
If I specify the field with Tab name in FM , It says its not an internal table with header line.
Please help me, How should can I proceed further and pass the field to FM and get it back in work area.
And an other issue is I want to sum the particular field in the output.
Is there a way to do using 'PF-STATUS', if so how ? or what is the alternative for this ?
Please help me with my issues.
I'm new to ALV reports.
Thanks in Advance !

Hi,
For your FM issue, i think you are trying to pass the field in the FM as ITAB-field, while you should be taking the data in the work area first and then pass this work area in the FM as WA_ITAB-field.
I hope this will resolve your prob.
I mean loop at the table and take the values into work area, update the internal table with changed value. This way by the end of loop you will have all your fields converted.
Please explain a little more about your second doubt, it is unclear(to me atleast).
Edited by: DeepakNagar on Jul 28, 2011 6:08 PM

Re : about ALV Reporting

hi all,
 what are the events in alv reporting?
Thanks in advance.

Hi there
If you read my post in the OO ABAP thread you should find an EASY way of generating your reports with all the functionality you need EDIT, Data entry, double click, create EXCEL spread sheet etc etc.
I can't seem to get the thread ID for a LINK but look for post entitled
For all users having probs with OO ALV Grid it's in the ABAP OBJECTS forum.
If you follow the steps outlined there you'll be able to generate complex reports very quickly with minimal code and you won't have to do all the tedious FCAT building etc etc.
The example there uses dynamic tables, and FCATS and the new RTTI (RunTime Information) functionality so your structure can be built FROM ANY ITAB --DDIC or not at run time.
Your application program will then only need to be about 1 or 2 pages long.
Copy the CLASS from that post and save it as an INCLUDE.
Here's just a taster to show you how easy it is.
This program reads 200 sales orders from VAPMA and displays it in a GRID
If you double click on a cell transaction VA02 is called. After you leav VA02 the GRID table is updated with a 'C' in the sales order line where you doyble clicked.
The Toolbar EXCEL will create an EXCEL spreadsheet directly with column headings etc where you can save the data as a file.
Do these 2 things first
Create a Blank Screen with a custom container on it called CCONTAINER 1. (SE51)
(optional) create a STATUS (SE41) so you can have the standard SAP toolbar at the top of the SAP screen .
Copy this program and the CLASS referred to in my post in the ABAP OBJECTS FORUM.
Program ZZORDERDISP.
DEFINE col_name.
read table it_fldcat into wa_it_fldcat index &1.
 wa_it_fldcat-coltext = &2.
 modify it_fldcat from wa_it_fldcat index &1.
END-OF-DEFINITION.
Jimbo 2007.
FIELD-SYMBOLS :
<fs1> TYPE ANY,
<fs2> TYPE STANDARD TABLE,
<fs3> TYPE ANY,
<field_catalog> TYPE STANDARD TABLE,
<dyn_table> TYPE STANDARD TABLE,
<orig_table> TYPE STANDARD TABLE,
<dyn_field>,
<dyn_wa>.
INCLUDE ZZJIMBOXX_INCL. ===> copy the CLASS definition
From my post in ABAP OBJECTS FORUM.
INCLUDE <icon>.
TABLES : VAPMA.
TYPES: BEGIN OF s_elements,
vbeln TYPE vapma-vbeln,
posnr TYPE vapma-posnr,
matnr TYPE vapma-matnr,
kunnr TYPE vapma-kunnr,
werks TYPE vapma-werks,
vkorg TYPE vapma-vkorg,
vkbur TYPE vapma-vkbur,
status TYPE c,
END OF s_elements.
DATA: z_object TYPE REF TO zcl_dog, "Instantiate our class
 grid_container1 TYPE REF TO cl_gui_custom_container,
 t_elements TYPE TABLE OF s_elements, "refers to our ITAB
 wa_elements TYPE s_elements,
 wa_dyn_table_line TYPE REF TO DATA,
 it_fldcat TYPE lvc_t_fcat,
 i_gridtitle TYPE lvc_title,
 wa_it_fldcat TYPE lvc_s_fcat,
 new_table TYPE REF TO DATA,
 dy_table TYPE REF TO data,
 dy_line TYPE REF TO data,
 row_id TYPE sy-index.
START-OF-SELECTION.
CALL SCREEN 100.
END-OF-SELECTION.
MODULE status_0100 OUTPUT.
break-point 2.
ASSIGN wa_elements TO <fs1>.
CREATE OBJECT z_object EXPORTING z_object = z_object.
CALL METHOD z_object->build_dynamic_structures
 CHANGING it_fldcat = it_fldcat.
Here before displaying you can change the field catalog to
adjust your own names
Method call just uses the names in the table structure.
 col_name 1 'Order Nr'.
 col_name 2 'Item'.
 col_name 3 'Material'.
 col_name 4 'Customer'.
 col_name 5 'Plant'.
 col_name 6 'Sales Org'.
 col_name 7 'Sales Office'.
 col_name 8 'Status'.
PERFORM populate_dynamic_itab.
CALL METHOD z_object->display_grid
 CHANGING it_fldcat = it_fldcat.
SET PF-STATUS '0001'.
SET TITLEBAR '000'.
ENDMODULE.
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
 WHEN 'BACK'.
 LEAVE PROGRAM.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'RETURN'.
 LEAVE PROGRAM.
 WHEN OTHERS.
ENDCASE.
ENDMODULE.
FORM populate_dynamic_itab.
SELECT vbeln posnr matnr kunnr werks vkorg vkbur
 UP TO 200 rows
 FROM vapma
 INTO CORRESPONDING FIELDS OF TABLE <dyn_table>.
Populate Dynamic table and save a copy
create 2nd Dyn table to hold original data
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fldcat
 IMPORTING
 ep_table = dy_table.
 ASSIGN dy_table->* TO <orig_table>.
CREATE DATA dy_line LIKE LINE OF <orig_table>.
ASSIGN dy_line->* TO <dyn_wa>.
<orig_table> = <dyn_table>.
ENDFORM.
FORM VERWERK.
break-point 1.
Orig table is in dynamic table <orig_table>
ALV GRID changed table is in <dyn_table>.
Loop at <orig_table> into <dyn_wa>.
Do what you want
end
endloop.
ENDFORM.
FORM refresh.
data: ord_nr TYPE vapma-vbeln.
READ TABLE <dyn_table> index row_id into wa_elements.
 ord_nr = wa_elements-vbeln.
set parameter id 'AUN' field ord_nr.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
wa_elements-status = 'C'.
modify <dyn_table> from wa_elements index row_id.
break-point 1.
CALL METHOD z_object->refresh_grid.
ENDFORM.
form dubbleklik using
 e_row type LVC_S_ROW
 e_column type LVC_S_col
 es_row_no type lvc_s_roid.
 break-point 1.
Get Row id into a variable for this program.
 row_id = e_row.
 SET TITLEBAR '001'.
 i_gridtitle = 'Grid Title Changed'.
 CALL METHOD z_object->change_title
 EXPORTING i_gridtitle = i_gridtitle.
 PERFORM refresh.
endform.
That's it --code exactly as shown and it will work --you can have a lot of fun with the toolbar options including the excel spread sheet creation without usiing GUI download or whatever.
Have fun -- and if you ever need to take more than about 5 mins to generate an ALV report in the future your Boss will be upset.
Cheers
Jimbo

ALV REPORT FOR TOP 10 CUSTOMERS

hI,
sap guys
I need a help on alv. iam getting alv report. now i need to get TOP 10 customers in my report.
My report having selling price , cost price , GP , GP% .
Final internal table iam sorting based on Selling price. But how to Get the Top 10 customers in my report.
Plz help me..

hi
good day brother
Before youve given the solution for top 20 cust as well as subtot.. iam getting a prob for one branch for subtot.
Plz see the code..
Ive dev the smart form for top 20 customers by Branch wise.. I have 17 branches in final itab.
Every thing is fine except one branch for the Subtot.
For getting Subtot as well as Getting the top 20 cust.. the below code ive used.
First branch like lt_br_out2 got 503 records
lt_br_out3 == 213
lt_br_out4 == 0
lt_br_out5== 82
lt_br_out6 ==89
lt_br_out7 ==118
lt_br_out8 == 45
lt_br_out9 == 64
lt_br_out10 == 53
lt_br_out11 == 47
lt_br_out12 == 56
lt_br_out13 == 20 *************** "Problem with this internal table.
lt_br_out14 ==170
Problem: All Branches are getting subtotal and top 20 cust except " LT_BR_OUT13"...Before its going to cal the top 20 cust. its has only 20 records.
Actually iam counting the top 20 cust as well as cal subtot and passing to Final Internal Table..
SORT lt_br_out13 BY p1_a_p DESCENDING.
CLEAR : lwa_out6.
LOOP AT lt_br_out13 INTO lwa_out6.
    IF sy-tabix > 20.
      CLEAR: lwa_out6.
***adding the subtot
      lwa_out6-ort01 = lv_text.
      lwa_out6-p1_a_p = lv_brtot.
      lwa_out6-p2_a_p = lv_brtot1.
      lwa_out6-act_gross_p = lv_br.
      lwa_out6-act_gross_perc1 = lv_brperc1.
      APPEND lwa_out6 TO lt_br_final.
      EXIT.
    ELSE.
***calc the sub tot
      lv_text    = 'Sub Total'.
      lv_brtot   = lv_brtot + lwa_out6-p1_a_p. " selling price
      lv_brtot1 = lv_brtot1 + lwa_out6-p2_a_p. " Cost price
      lv_br      = lv_brtot - lv_brtot1.
      lv_brperc   = ( lv_br / lv_brtot ) * 100.
      IF lv_brperc NE 0.
        WRITE lv_brperc TO lv_brperc1 LEFT-JUSTIFIED.
        CONCATENATE lv_brperc1 '%' INTO lv_brperc1 SEPARATED BY space.
      ENDIF.
      APPEND lwa_out6 TO lt_br_final.
    ENDIF.
ENDLOOP.
If i put sy-tabix >= 20, thne iam getting subtotal but iam getting only 19 records.
Could u plz advice me.. Ive solved yesterday problem
Regards

Open Field in ALV Report

Hi all,
i have to develop a ALV report.
In that report i have to put a open quantity column , so that the user can enter values in that, and that value should get updated in the database.
So please suggest me how to develop such report with open field.
Thanks in advance,
Regards,
Pawan

Hi,
Try executing the below code
REPORT YMS_EDITBLOCKALV.
TABLES : rmmg1,MCHB, mkpf.
DATA: BEGIN OF t_mseg OCCURS 0,
zeile LIKE mseg-zeile,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
matnr LIKE mseg-matnr,
werks LIKE mseg-werks,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
END OF t_mseg.
DATA:BEGIN OF t_mchb OCCURS 0.
INCLUDE STRUCTURE mchb.
data flag type c.
matnr LIKE mchb-matnr,
charg LIKE mchb-charg,
werks LIKE mchb-werks,
clabs LIKE mchb-clabs,
DATA END OF t_mchb.
TYPE-POOLS slis.
data: progname like sy-repid,
fieldcattab TYPE slis_t_fieldcat_alv WITH HEADER LINE.
data tabindex type i.
data wa_matnr LIKE mchb-matnr.
progname = sy-repid.
SELECTION-SCREEN BEGIN OF BLOCK b_b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS s_docno FOR mkpf-mblnr. " OBLIGATORY.
PARAMETERS p_docyr LIKE mkpf-mjahr. " OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b_b1.
START-OF-SELECTION.
SELECT zeile
menge
meins
matnr
werks
charg
bwart
FROM mseg
INTO TABLE t_mseg
WHERE mblnr IN s_docno AND mjahr = p_docyr.
CLEAR fieldcattab.
fieldcattab-col_pos = 1.
fieldcattab-fieldname = 'ZEILE'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Item'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 2.
fieldcattab-fieldname = 'MENGE'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Quantity'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 3.
fieldcattab-fieldname = 'MEINS'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Unit'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 4.
fieldcattab-fieldname = 'MATNR'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Material'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 5.
fieldcattab-fieldname = 'WERKS'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Plant'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 6.
fieldcattab-fieldname = 'CHARG'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Batch No'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 7.
fieldcattab-fieldname = 'BWART'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Inventory'.
fieldcattab-hotspot = 'X'.
APPEND fieldcattab.
end-of-selection.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = PROGNAME
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USERCOMMAND1'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = fieldcattab[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT = fieldcattab
IT_HYPERLINK =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t_mseg
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM usercommand1 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
tabindex = rs_selfield-tabindex.
read table t_mseg INDEX tabindex.
select * from mchb into table t_mchb where matnr = t_mseg-matnr.
clear fieldcattab.
CLEAR fieldcattab[].
fieldcattab-col_pos = 1.
fieldcattab-fieldname = 'FLAG'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Check Box'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
fieldcattab-checkbox = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 2.
fieldcattab-fieldname = 'MATNR'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Material'.
fieldcattab-emphasize = 'C1'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
fieldcattab-checkbox = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 3.
fieldcattab-fieldname = 'CHARG'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Batch No'.
fieldcattab-emphasize = 'C2'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 4.
fieldcattab-fieldname = 'WERKS'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Plant'.
fieldcattab-emphasize = 'C30'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 5.
fieldcattab-fieldname = 'CLABS'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Stock'.
fieldcattab-emphasize = 'C601'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = PROGNAME
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USERCOMMAND2'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = FIELDCATTAB[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t_mchb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.
endform.
FORM usercommand2 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
IF rs_selfield-sel_tab_field = 'T_MCHB-MATNR'.
CALL FUNCTION 'ZALV2'
EXPORTING
CTU = 'X'
MODE = 'E'
UPDATE = 'A'
GROUP =
USER =
KEEP =
HOLDDATE =
NODATA = '/'
MATNR_001 = '200-200'
KZSEL_01_002 = 'X'
IMPORTING
SUBRC =
TABLES
MESSTAB =
SET PARAMETER ID 'RID' FIELD RMMG1-MATNR.
CALL TRANSACTION 'MM03' and skip first screen.
ENDIF.
ENDCASE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = progname
i_callback_user_command = 'USERCOMMAND3'
it_fieldcat = fieldcattab[]
TABLES
t_outtab = t_mchb
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endcase.
ENDFORM.
Regards,
chandru

'@' not getting displayed in the ALV report

Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

PF STATUS IN ALV REPORT

hi,
How to use PF STATUS IN ALV REPORT?

HI,
see this code.
TABLES:MARA.
SELECT-OPTIONS: MATNR FOR MARA-MATNR.
DATA:BEGIN OF ITAB OCCURS 0,
 MATNR LIKE MARA-MATNR,
 ERSDA LIKE MARA-ERSDA,
 MTART LIKE MARA-MTART,
 MBRSH LIKE MARA-MBRSH,
END OF ITAB.
SELECT * FROM MARA INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE MATNR
IN MATNR.
TYPE-POOLS SLIS.
DATA:FCAT TYPE slis_t_fieldcat_alv.
DATA:LAYOUT TYPE slis_layout_alv.
DATA:EVE TYPE slis_t_event WITH HEADER LINE.
DATA:HEAD TYPE slis_t_listheader WITH HEADER LINE.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
SORT-UP = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'ERSDA'.
SORT-tabname = 'MARA'.
APPEND SORT.
SORT-SPOS = 2.
SORT-FIELDNAME = 'MTART'.
SORT-tabname = 'MARA'.
APPEND SORT.
EVE-NAME = 'TOP_OF_PAGE'.
EVE-FORM = 'TOPOFPAGE'.
APPEND EVE.
EVE-NAME = 'TOP_OF_LIST'.
EVE-FORM = 'TOPOFLIST'.
APPEND EVE.
EVE-NAME = 'END_OF_LIST'.
EVE-FORM = 'ENDOFLIST'.
APPEND EVE.
LAYOUT-ZEBRA = 'X'.
LAYOUT-no_hline = 'X'.
LAYOUT-NO_VLINE = 'X'.
LAYOUT-window_titlebar = 'MATERIAL DETAILS'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
 I_PROGRAM_NAME = SY-REPID
 I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
 I_INCLNAME = SY-REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
 CT_FIELDCAT = FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = SY-REPID
 I_CALLBACK_PF_STATUS_SET = 'STATUS'
 I_CALLBACK_USER_COMMAND = 'UCOMM'
I_STRUCTURE_NAME =
 IS_LAYOUT = LAYOUT
 IT_FIELDCAT = FCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
 IT_SORT = SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
 IT_EVENTS = EVE[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 5
I_SCREEN_START_LINE = 5
I_SCREEN_END_COLUMN = 120
I_SCREEN_END_LINE = 25
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOPOFPAGE.
REFRESH HEAD.
 HEAD-TYP = 'H'.
 HEAD-INFO = 'MATERIALS'.
 APPEND HEAD.
 CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = HEAD[]
 I_LOGO =
 I_END_OF_LIST_GRID =
ENDFORM.
FORM TOPOFLIST.
REFRESH HEAD.
 HEAD-TYP = 'H'.
 HEAD-INFO = 'MATERIALS-LISTTOP'.
 APPEND HEAD.
 CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = HEAD[]
 I_LOGO =
 I_END_OF_LIST_GRID =
ENDFORM.
FORM ENDOFLIST.
REFRESH HEAD.
 HEAD-TYP = 'H'.
 HEAD-INFO = 'MATERIALS-LISTEND'.
 APPEND HEAD.
 CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = HEAD[]
 I_LOGO =
 I_END_OF_LIST_GRID =
ENDFORM.
FORM STATUS USING MYMENU.
 SET PF-STATUS 'MENU' excluding MYMENU.
ENDFORM.
FORM UCOMM USING CODE STEXT.
 CASE CODE.
 WHEN 'ABC'.
 WRITE:/ 'YOU HAVE CLICKED ON ABC'.
 WHEN 'XYZ'.
 WRITE:/ 'YOU HAVE CLICKED ON XYZ'.
 ENDCASE.
ENDFORM.
rgds,
bharat.

Menu options in ALV report

Hi,
Im not getting Menu options in ALV report output. Not even default menu options SYSTEM, HELP Its dispalying as ????????????????????????????????. Can someone help me regarding this?
Regards,
amal

Hi Amal,
Check the screen number if you are using a seperate screen and Menu painter.
Thanks and Regards,
Sampath

Double click in alv report

Hi all,
I have below output in alv report.
matnr 101_102 121_122 123_124
10000 23 34 45
10001 34 34 456
if i m clicking on 23 in combination of 121_122 and 10000 then i want to see detail for 121_122 and if i m clicking on 34 combination of 101_102 then i want to see detail according to it.
plz help me. its urgent.
thanks in advance.

Check the below report and do compare and modify the report as per your req.
REPORT ZZ_22038_22098_002 NO STANDARD PAGE HEADING LINE-SIZE 650
MESSAGE-ID ZZ_9838 .
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
 EBELN LIKE EKKO-EBELN,
 AEDAT LIKE EKKO-AEDAT,
 BUKRS LIKE EKKO-BUKRS,
 BSART LIKE EKKO-BSART,
 LIFNR LIKE EKKO-LIFNR,
 END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
 WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
 EBELN LIKE EKPO-EBELN,
 EBELP LIKE EKPO-EBELP,
 MATNR LIKE EKPO-MATNR,
 MENGE LIKE EKPO-MENGE,
 MEINS LIKE EKPO-MEINS,
 NETPR LIKE EKPO-NETPR,
 END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
 WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
 WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
 I_VARIANT1 TYPE DISVARIANT,
 I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
 Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 0
 IMPORTING
 ET_EVENTS = V_EVENTS
EXCEPTIONS
 LIST_TYPE_WRONG = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
 Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
 WA_EVENT-FORM = 'TOP_OF_PAGE'.
 MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
 WA_EVENT-FORM = 'USER_COMMAND'.
 MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
 text
 -->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
 text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
 I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
 IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
 i_default = 'ZLAY1'
 I_SAVE = 'A'
 is_variant = i_variant
 IT_EVENTS = V_EVENTS
 TABLES
 T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
 text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = IT_LISTHEADER
 i_logo =
 I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
 text
 -->R_UCOMM text
 -->, text
 -->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
 WHEN '&IC1'.
 READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
 PERFORM BUILD_FIELDCATLOG_EKPO.
 PERFORM EVENT_CALL_EKPO.
 PERFORM POPULATE_EVENT_EKPO.
 PERFORM DATA_RETRIEVAL_EKPO.
 PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
 PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
 text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 0
 IMPORTING
 ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
 Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
 WA_EVENT-FORM = 'TOP_OF_PAGE'.
 MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
 text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = IT_LISTHEADER
 i_logo =
 I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
 text
 -->R_UCOMM text
 -->, text
 -->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
 I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
 IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
 I_SAVE = 'A'
IS_VARIANT =
 IT_EVENTS = V_EVENTS
TABLES
 T_OUTTAB = IT_EKPO
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Thanks
Seshu

Single row in alv report

Hi experts...
I want single row in alv report.
I have use loop for fatch data into internal table using loop when i am passing data in alv report then the data comes according loop. i want onlu one data in alv row.
how can i do such, plz help me.

decleare two internal table.
read table itab into wa index 1.
append wa to itab2.
pass itab2 only one record display.

Icon display in alv report

Hi all,
 I have a problem in alv report ,there are 5 fields to display and in 6th position i have to display an icon as red or green light according to data. How can i do that ? please help me .
Thanks and regards
Goutam

Hi goutam,
1. Simple
2. we have to use the layout for this purpose.
3. like this :
alvly-lights_fieldname = 'LT'.
alvly-lights_tabname = 'ITAB'.
4. Just copy paste to get a taste of it.
(important code has been highlighted)
REPORT abc.
TYPE-POOLS : slis.
DATA : alvly TYPE slis_layout_alv.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : BEGIN OF itab OCCURS 0,
 lt TYPE i,
 matnr LIKE mara-matnr,
 END OF itab.
END-OF-SELECTION.
 itab-lt = 1.
APPEND itab.
itab-lt = 2.
APPEND itab.
itab-lt = 3.
APPEND itab.
itab-lt = 1.
APPEND itab.
itab-lt = 3.
APPEND itab.
itab-lt = 3.
APPEND itab.
itab-lt = 3.
APPEND itab.
 alvly-lights_fieldname = 'LT'.
alvly-lights_tabname = 'ITAB'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 i_program_name = sy-repid
 i_internal_tabname = 'ITAB'
 i_inclname = sy-repid
 CHANGING
 ct_fieldcat = alvfc.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 it_fieldcat = alvfc
 is_layout = alvly
 i_save = 'A'
 TABLES
 t_outtab = itab.
regards,
amit m.

Display Icons in ALV report

Hi all Good Morning.
In ALV report am inserted my own icons. But the problem is at output screen am getting only those icons which i created, remaining are not displaying in standard tool bar .
Please tell me how to solve this. I want to display all default icons with my own created icons in standard tool bar .
Regards,
Prajwal K.
Edited by: prajwal k on Jan 24, 2008 4:39 AM

Hi Prajwal, this code will solve ur problem.
go to SE41.
Give SAPLKKBL as program name and STANDARD_FULLSCREEN as status....
now click on Copy Status and in that give ur program and status name into To.....
now in REUSE_ALV_GRID_DISPLAY
FORM display_list.
g_f_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_f_repid
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_STAT'
it_fieldcat = g_t_fieldcat[]
it_events = g_t_events[]
TABLES
t_outtab = g_t_itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_list
FORM set_stat USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTAT' EXCLUDING rt_extab.
ENDFORM. "set_stat
here my status name is ZSTAT which i gave in SE41...
and in user_command form...
FORM user_command USING u_comm LIKE sy-ucomm selfield TYPE slis_selfield.
CASE u_comm.
WHEN 'DET'.
........ur logic.........
ENDCASE.
ENDFORM. "user_command
kindly reward if found helpful.
cheers,
Hema.

Information button in ALV report

Information button in ALV report is not working. any suggestion

I have copied standard tool bar from standard program.During debugging, I have found that function code is defferent. Then I changed function code according to that.

Prob in alv report

Similar Messages

Maybe you are looking for