Probelm while installing windows 7 on MacBook pro through bootcamp? I am getting a black screen during installation

Apple Support Boot Camp
Is there any article in the above?
did you read the pdf before beginning from Boot Camp Assistant?
Did you upgrade to Lion or was it pre-installed?

Similar Messages

Installing windows on macbook pro without bootcamp. Will this allow for switchable graphics?

Hi everyone, I was thinking of buying a new Macbook Pro Retina 15 Inch with the discrete nvidia graphics card inbuilt with it.
I love windows and I am planning on running windows 7/8 on the macbook pro as my primary OS (because of advantages of gaming and being familarized with windows os), however I have heard the issue of running windows on bootcamp severally drains battery life as apple does not allow you to switch the nvidia graphics to the integrated graphics. Is this true? I have heard that running windows 7/8 on bootcamp allows for only around 3:30 hours of battery life, whilst OSX allows for 8+ since it uses the integrated graphics primarily when not running GPU demanding applications.
I am wondering if you can install windows 7 without bootcamp which will wipe apple OS from the laptop completely. Will this allow for the laptop to do switable graphics without problems allowing the laptop to save much needed battery life?
Thanks in advance.
Michael

Sorry it seems to have taken so long for you to get an answer on this question!
Your last post was mostly right... It IS a bad idea to go that route!
While it's technically POSSIBLE to get Windows in place without OSX, it's a MAJOR technical hassle and you need to jump through several hoops to get to that point.
In addition to the hassle required, having an OSX partition can be incredibly useful at times - I've had my Windows system break several times in the past where the automated (and even manual) startup-repair process failed to get Windows booting again, but a short boot into OSX later, I have the problem resolved (via OSX) and am able to get back into Windows.
Finally, you need to be aware that the graphics card situation isn't because of the presence of OSX. Just because you get rid of MacOS doesn't mean you suddenly will be able to use either graphics card! The limitation comes into play with the hardware drivers necessary to get all your hardware working in Windows - they just don't have the facility to switch graphics cards built into them.
I'm afraid you're stuck with the NVidia card when using Windows, one way or another!
Bootcamp is a prerequisite BTW. Without it you won't be able to get Windows installed at all (at least not without MAJOR stumbling block, again!), and again, the graphics card limitation isn't due to OSX or Bootcamp.
Also, battery life... Yes. You'll have significantly less in Windows, and this isn't entirely because of the graphics card situation either. MacOS is just built so well, with the limited hardware used by Apple in mind, that power-management when using OSX os significantly better! The legendary battery life of Apple systems is actually primarily due to the operating system, not the batteries themselves!
As a helpful indication: On my 2009 17" MBP I get about 7 hours on the integrated chip in OSX (8 is pusing it, but is possible sometimes); about 5 hours in OSX when using the NVidia; and about 3 and a half when I'm in Windows.
Hope this all helps you. If you have any further questions feel free!
Apologies for the scattered approach to answering your posts - it's LATE where I am and I"m kinda rushing through things... :-)

Installing Windows on Macbook Pro, NO BOOTCAMP

I have a 15 inch core 2 duo Macbook Pro and I went to restore my computer to tiger once again and when I did I relised that the disk is too scratched up, I can only get about 90 percent of the minimal installation done.
After a while of trying diffrent things i got fet up and partitioned my hard drive to Master boot record and poped in my Win7 install disk, I installed Windows 7 perfectly with no problems but now when I go to boot it up all I get is a grey screen and after a while a folder icon pops up with a question mark on it.
How can I fix this without using another mac or bootcamp, because I DON'T have access to one and i DON'T have access to another mac cd, so don't give me that option, lol.. The only thing I have access to is another windows 7 computer.
Please help, I thought mac was suppose to be one of the top brand computers. especially with the price of them, but so far I've had more trouble with this mac than what I did with my HP, I had my HP 3 years now and my macbook not even a year.
Thanks,

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the desired disk icon from which you want to boot.
5. Click on the arrow button below the icon.
Select the Windows disk icon and click on the arrow button.
Where did you get the Windows installer from? Your HP? That's an OEM disc that cannot be used except on your HP. You need a retail Windows disc if you want to boot the Mac exclusively with Windows. Of course you will not have any of the hardware drivers for Windows for use on the Mac hardware.
I don't understand your complaints about a computer you don't seem to know how to use, your installer discs are all scratched up and no longer usable, but you have had lots of trouble with it. And, all your doing is trying to use it as a Windows computer. Defies logic.

IMac displays a black screen during installation of Windows 7

I tried to install windows 7 on my imac 27" but imac displays a black screen during installation of windows 7.
I also tried to install it as apples instruction of http://support.apple.com/kb/ts3173 but it failed.
Any solution please.. thanks
I have a late 27" imac with OS X 10.85

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

Installing XP on Macbook pro in bootcamp ~updates first?

For installing XP on Macbook pro in bootcamp what updates should I have installed first? I have already installed parallels with XP and all is well but I have one PC program that will not run on parallels and needs to be setup in a Bootcamp environment. I want to run the same version of XP in bootcamp - I hope.
If anyone has experence in partitioning the HD without compromising the Parallels OS setup and the MAC OS please advise, or where I can find instruction for doing this. Thank you.
Linda

Thanks- that what I was hoping. I wanted to run Windows XP- do you recommend a specific partition size? I have found information that is a bit conflicting about installing the same copy of Windows as was is installed on my Parallels. Some information states that it will wipe out my XP in Parallels if I try to install the same CD in Bootcamp,then there is information about work around's - and running Bootcamp inside of Parallels? Yikes!
I have been told by the software manufacturer I need bootcamp to run 'Pool Studio' on a MAC- that I can't use Parallels- do you have any idea if running the bootcamp Virtural Machine inside of Parallels would act the same as a separate version of windows. Except possible eleveate the licence issue.
Its ****** to have to buy another windows licience to run one program.
Do you have any ideas? Thanks

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

HT3986 i get a black screen during windows 7 installation on bootcamp 5.0.1

i get a black screen during windows 7 installation on bootcamp 5.0.1 , it wont install

Hi wb2009,
I haven't found that the TV would be an issue, but did find an article that states to not have extra USB devices connected.
Boot Camp: Windows installation boots to black screen with blinking cursor
http://support.apple.com/kb/TS4536
The Windows installation may boot to a black screen with a blinking cursor. This can occur if you use a USB optical drive or USB Flash drive for the Windows installation and another USB device is also connected to the computer.
There's another article that mentions Windows XP or Vista that may apply.
Archived - Boot Camp: Start up to black screen after installing Windows
http://support.apple.com/kb/TS2600
Thank you for visiting Apple Support Communities.
Nubz

Installing windows on MacBook Pro

I am looking into installing Windows on my Pro because I need Visual Studio for programming and just need some questions answered.
1. Is there a Mac native alternative to Visual Studio? I am using it for a Visual basic class I am taking and we are creating windows applications.
2. Can I buy an external hard drive to run Windows OS from? I opted for the ~256gb SSD MacBook Pro and am not wanting to waste storage space on Windows OS, especially since I do not foresee using it after this class.
3. If I cannot run Windows from an external hard drive: How easy is Windows installation, as well as how easy is it to remove Windows OS when I am finished using Visual Studio? Are there risks to my MacBook accompanied with Windows installation?

1, No
2, No, Microsoft doesn't allow that
3, Read http://manuals.info.apple.com/MANUALS/1000/MA1583/en_US/boot_camp_install-setup_ 10.7.pdf

Macbook pro late 2009 turns on twice and black screen with no booting

my macbook pro late 2009 (10.6.7) when i press the power button it turns on, then it turns off by itself and then on again and gets a black screen and nothing more no booting sound and i just hear the fans or the Hard Drive going... i really need help with this one

Hello aB_Cepeda
For issues with your MacBook Pro not starting up, check out the articles below as they pertain to issues with start up. The big thing to look for to troubleshoot is to see if you can boot to either your Installation Disk or Recovery HD. If you can, try using Disk Utility to verify your hard drive to make sure that there are no issues. You may need to reinstall Mac OS X Snow Leopard.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
OS X: Gray progress bar appears under Apple logo during startup
http://support.apple.com/kb/TS3148
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
Regards,
-Norm G.

My macbook pro doesn't turn and has a black screen. Fan is running though. Does anyone know what to do?

Does anyone have any advise when a Macbook Pro doesn't boot and has a blank screen? The fan is running but there are no backlights working.

Depending on your model MBP, see Article: http://support.apple.com/kb/TS2377 MacBook Pro: Distorted video or no video issues These computers were manufactured between approximately May 2007 and September 2008
If you are under warranty and/or have AC, give them a call.
Out of warranty, take your MBP to your local AS and/or AASP.

Portege 7220 and windows 98. Black screen during installation

Hi,
I am facing the following problem when I am trying to install win98 on the above machine Portege 7220 (/PIII650/64/12/13t/M), on its docking station ...
I boot from a diskete and I access the cd rom (e:\) in order to run windows 98SE setup. After I type e:\setup.exe I get a black screen and the computer freezes. However I can install windows NT or 2000 on the this machine, and moreover the windows 98SE cd runs ok on other computers, i.e. no black screen!!!!
Any idea what is wrong?
Thanks in advance,
Bar

Hi Bar
Please don`t be mad on me but I must ask you something. Do you use Win98SE full version or just update CD for Win98?
It can be that your CD is scratched! So please try another CD again or another OS like W2k!

Is there a way to run Windows 8 pro on a Retina Macbook Pro through bootcamp?

I recently purchased a copy of Windows 8 Pro to see if I could run it through bootcamp. I have a USB SuperDrive , so I thought it would be simple enough. However, I'm pretty lost on how to configure my bootcamp to work. I've aimlessly looked at tutorials and such, but none have been of much help. I know the Retina macbook lacks an optical drive, so I believed using a Super Drive would work. If anyone can shed light on this situation and help it would be greatly appreciated.

Yes, but Apple does not yet support Win8, so there are no compatible Windows drivers for the Apple hardware.
How to Install Windows 8 with Boot Camp on your Macbook or iMac

Not possible to install windows on macbook pro

I have one Macbook pro 2011 late version . My boot camp assistant not showing option ” Create a Windows 7 install disk ” only showing download the latest windows support software from apple and remove windows partition. Please help me

If you have a built-in Optical drive, you will not get an option to create a USB.

Can't connect to work server (windows) on MacBook Pro through VPN - via router

Due to the nature of my job now, I am working remotely.
The IT department hooked me up with a MacBook Pro that connects to our work server, which I know is Windows-based, via a VPN. The VPN connects just fine; however, when I go to connect to the server—it doesn't find it. It gives me:
The server “dc03” may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
Interestingly enough, the first time I used it (at Starbucks, then McDonald's) it worked, but at home it wouldn't. We isolated the issue to the router, since I could do it when plugged in, but no one could figure out what kind of settings were different or weird. I went to the store and bought 2 other routers. One worked, the Linksys, but the Belkin did. WHAT? So the cheaper one worked? This was the easiest solution, because still don't know the bottom line: why?
Now, a local spot in town that I frequent—one that used to allow me to connect to my work server—changed routers (the "newest, fastest" AVIS). So now, I cannot connect and get that same message.
My IT guys are stumped. I don't personally know enough about this side of technology to be of any use.
Does anyone have any idea what's going on?

What is the make & model of the new wireless router that you ISP has provided you? Are you able to administer it if needed?
For the MacBook Pro, try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

How to install windows on macbook pro me294 using downloaded drivers?

Recently I bought a MBP and I'am going to install windows on it because of my job. I have a problem with bootcamp assistant: I have downloaded the bootcamp drivers but when I am creating the setup disk it automatically chooses to download the drivers again! What should I do?

i have done this steps but when i boot the usb key it freezes in the first screen ( selecting languages ) ! but i believe it doesn't freezes, it is because it doesn't recognize my hardware. when i was installing win8 there were no problems like this!

Probelm while installing windows 7 on MacBook pro through bootcamp? I am getting a black screen during installation

Similar Messages

Maybe you are looking for