Probelm with the access key not shown on menu item

Hi
I have created a Menu and used setMnemonic for the menu items.
But, I dont see the letter underlined when I set the look and feel as the following code
try {
    UIManager.setLookAndFeel
    (UIManager.getSystemLookAndFeelClassName());
} catch (Exception e) {
    e.printStackTrace();
}I see it only when I click on it or I press Alt button on the keyboard.
Is it because of the look and feel for windows XP or what may be the reason? Please help.
Thanks

Is it because of the look and feel for windows XP Yes. This is configurable in XP and the default is to not show it.
Search the forum if you want to know how to change the default in XP.

Similar Messages

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

Hi j,
I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin.

IPhoto opens but then the spinning rainbow wheel appears and I can't do anything. I have opend iPhoto with the Option key pressed and rebuilt the library and it still happens. I want to at least access my photos and copy them to an external drive.

iPhoto opens but then the spinning rainbow wheel appears and I can't do anything. I have opend iPhoto with the Option key pressed and rebuilt the library and it still happens. I want to at least access my photos and copy them to an external drive. Anyone have ideas on how to get to them?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Reinstalling,APSE11,from,original,CD,with,serial,number,,I,get,the,message,"Key,not,valid, for,use,in,specified,state."

While reinstalling APSE 11 (windows) from original CD (with serial number), I get the message "Key not valid for use in specified state." What do I do?

Unfortunately, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content

This message shows up when I try to access my auxiliary iPhone library: "The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library."

This message shows up when I try to access my auxiliary iPhone library: "The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library."
What did I do wrong? I have been downloading all my photos into this same library since Janurary with no problems.

What version of Mac OS X?
Click the black Apple icon on the top left of the screen and select About This Mac. The next screen will show the information.

Digital signature does not validate with the given key

We are switching our single-signon provider from openssl to Weblogic's SAML. I am trying to create a test application that will send mock SAML assertions to our test Weblogic SAML server before we begin integration with the client that will send real SAML assertions.
I have configured a Weblogic 10.3.5 instance to be a SAML Service Provider as well as created an application that creates test SAML assertions to post to the SAML server. I'm currently using a self-signed certificate to sign the SAML assertion. I've imported the self-signed cert into both the DemoIdentiy.jks and cacerts on the Weblogic SAML server.
The Weblogic SAML server is giving the following error when trying to validate the signature of the assertion:
<SAML2Assert: Start verify assertion signature>
<SAML2Assert: The assertion is signed.>
<SAML2Assert: Digital signature does not validate with the given key
org.opensaml.xml.validation.ValidationException: Digital signature does not validate with the given key
at org.opensaml.xml.signature.SignatureValidator.validate(SignatureValidator.java:68)
at com.bea.security.saml2.util.SAML2Utils.verifySamlObjectSignature(SAML2Utils.java:229)
at com.bea.security.saml2.providers.SAML2Assert.verifySignature(SAML2Assert.java:285)
>
I get this error when the SAML assertion includes both the cert and the public key, just the cert, just the public key or neither.
I'm pretty sure I've configured the SAML instance correctly since I followed the steps provided by another group who got this working with a different client. The only difference is they are using a real signed certificate (Verisign i believe) instead of a self signed cert.
I'm looking for any help to track down which step in the process I've missed or implemented incorrectly.
Thanks!
Edited by: 911967 on Feb 6, 2012 12:26 PM

So I found my own answer to the issue. The error was being caused by an the following xml in the assertion:
<ds:Reference URI="">
The value of URI attribute must have a '#' followed by the same value of the ID attribute in the parent 'Assertion' element (in our case a random string):
<saml:Assertion xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion" ID="a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe" IssueInstant="2012-03-12T14:33:25.986Z" Version="2.0">
<saml:Issuer>ISSUER_NAME</saml:Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
*<ds:Reference URI="#a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe">*
How this is related to the digital signature is beyond me, though I admit I'm very new to saml and digital signing. However I spent a great deal of time investigating my certs and how I was creating the signature, which it seems is unrelated to the actual issue. I also wasn't able to find any docs specifying that this attribute was required, though I might have just missed it.

Can not associate with the access point

Greetings!
I am just new here. I am trying to set-up a wireless connection from our linksys router. I recently purchased a linksys wireless internet receiver thru USB connection. Now, my problem is the pc that is supposed to receive a wireless connection is stating " can not associate with the access point". I am not too good about computers, that is why I am seeking you help.
I hope I can hear from you guys.
Thanks in advance.
Cheers!
Square

Lets start with the bad news, no wireless connection. Good news, fixable.
Make sure all your security settings on the usb adapter are correct. If router is set for wep set adapter to wep,and so on. Also check all your firewalls, in windows, and on any virus suites that you may have running. Try turning off all firewalls, other than router, and see if that helps. Also download the easy link advisor from the linksys home page. Make sure your ssid, and network names are set the same for router, and adapter.
Stlbluesfan30
Cisco Network Academy Student

HT1883 I am trying to run a hardware test. The Computer will not start with the "D" key held?

I am trying to run a hardware test. The Computer will not start with the "D" key held?

If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
Running AHT in Lion
http://support.apple.com/kb/PH4510

InvalidKeyException: Could not initialize for signing with the given key

InvalidKeyException: Could not initialize for signing with the given key
What does this caused? And how can I make following code to work? Is it bug, or is it supposed to do so?
X509CertImpl newCert = new X509CertImpl(certInfo);
newCert.sign(caPrivateKey, SIG_ALG_NAME);

Your key is probably using a different algorithm:
Signature signature =
Signature.getInstance( SIGNATURE_ALGORITHM );
PrivateKey privKey =
( PrivateKey ) this.store.getKey( alias, pwd );
Make sure the SIGNATURE_ALGORITHM (SHA1WithRSA, SHA1WithDSA)
matches the algoright of the keystore.
your will see it when casting the private key into a concrete
key instance:
RSAPrivateKey privKey =
( RSAPrivateKey ) this.store.getKey( alias, pwd );

My MacBook Pro will not start up. I only get a grey screen with the spinning wheel. No blue page appears and the grey screen remains. Tried starting with the Shift key but ineffective as well.

Can't get my MacBook Pro to start up. Have shut it down several times and tried restarting but all I get is a grey screen with the spinning icon. Apple Support online suggested starting with power button followed immediately with the shift key. Same results. Also tried power button with shift key, command, and V. Black screen appeared instead with lots of data language but still no starting. This final page was suppose to result in an internal system check and restart but nothing happened and the black screen remains.Where do I go from here? Scheduled for the Genius Bar tomorrow but would like to resolve this beforehand.

You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
Clinton

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
Justin

Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

Silent install application with varying license key (not with TS)

Hi guys
I want to deploy an application through sccm 2012 r2 with a license key in the command line. So far no problem, with the paramater
ISX_SERIALNUMBER="XXX" I can handle that. So command line looks like:
msiexec /i "XY.msi" ISX_SERIALNUMBER="XXX"
But here's the problem. That license key changes very often, usually a key can just be used for 2-3 installation. After that I get a new key which I have to use (we have no volume licensing... yes I know... do not ask...).
I tried to create a machine variable (device - properties - variables) with the license key. but I didn't manage to get the variable in the command line correctly. I tried
ISX_SERIALNUMBER="%variable%" but it didn't work. I realised that those variables just can be used with a TS. But I really don't want to use a TS for software deployments...
After that I thought I'll try to get the variable with powershell and it worked. But just with an Administrator account who has access to the server. If i run the script in system context while deploying, it fails...
Does anyone have another way to deploy Software with a Licence Key as a computer variable? Or any other way to specify a specific Licence key for a specific computer?
thanks in advance
p.s. I know I could entering it manually... but that's not an option at this time.

I used the code in this link to achieve this in the past Worked very well.
http://www.windows-noob.com/forums/index.php?/topic/4853-deploying-software-with-unique-keys/
Basically you create a database to store your licences and it will update the fields to assign a computer object with the licence. Enter a column for Licences and one for Client. Set both to be type varchar(50) and allow for Null entries.
Cheers
Paul | sccmentor.wordpress.com
That is pretty cool :)

Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

we have developed packages to do the followings
Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
While runing the package we are getting the following error message
Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
ilikemicrosoft

Hi Surendiran,
This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
under a different user account.
This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
sensitive information using creator's account name.
As a solution:
Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
OR
Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
OR
The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
back.
Hope this helps.
Please mark the post as answered if it answers your question

Probelm with the access key not shown on menu item

Similar Messages

Maybe you are looking for