Problem about Mac Os X 10.6.3 V.S Labview 2009

hi,labview~
i have some problem about Labview 2009.i saw the website of NI wrote the Labview 2009 is not support for Mac OSX 10.6.3,but i have already installed it (English system) in my computer successfully.
anyway,i cant open the programs which are wrote by labview 8.5(Japanese system) .My labmate who use Labview 2009(Mac OSX 10.5) can open those programs.
can anyone tell me the possible reason i cant open the programs?
Thanks a lot!
PS i have already tried Labview 8.5 and 8.6(English system),but the problem cant be solved....

Hi mofi, my name is Taiki from National Instruments Japan.
I assume that the link you referred to is the one below, but as you stated, LabVIEW 2009 is not supported in Mac OS X 10.6 so even though you were able to install it successfully, NI cannot assure that it will fully function on your Mac.
LabVIEW Support for Mac OS 10.6 (Snow Leopard) and 10.5 (Leopard)
http://digital.ni.com/public.nsf/allkb/70F17A30DE7B865E8625737F006377F8?OpenDocument
Since you mentioned that the VI files were able to be opened on LabVIEW 2009, Mac OS X 10.5, the actual VI files should not be the issue which leaves us with the possibility of the software environment.
You also noted that the issue could not be solved on LabVIEW 8.5 and 8.6 but was this on Mac OS X 10.6 as well?
If so, there is a good chance that this issue is due to the fact that LabVIEW is running on an supported OS and I would suggest trying opening the files on another different Mac OS X 10.5 system.
Unfortunately, currently Mac OS X 10.6 is an unsupported OS for any version of LabVIEW so I can only suggest trying on a Mac OS X 10.5.
Kind regards.
Taiki Hoshi
Applications Engineer
National Instruments Japan

Similar Messages

A problem about calling Labview vi in VB

Hi all:
I meeting a problem about data transfer and parallel operation between VB and Labview.
Actually, I want develop a VB program, in which, the Labview VI can be called and corresponding parameters can be transferred to Labview. and then, I also can operate my system by VB program at same time. something like parallel operation (VB and Labview program).
But the question is :
1. If I use "Call" method of ActiveX in VB, and the LabVIEW subvi is not stopped (for example, a loop structure), I can not do parallel operation on VB program. The error message is "other application is busy" which is attached below. The sample codes is also attached.
2. I tried to use other methods like "OpenFrontPanel" and "Run", but I am not sure how to transfer the parameter??
3. Then I tried to use "SetControlValue" to set the parameters, but there is a error " := expected", which is very strange, because the statement I wrote is followed with the help documents [ eg: VI.SetControlValue ("string", value)], why it is still need a "=" ??
Does anybody know something about it? Thanks a lot
Message Edited by hanwei on 11-07-2008 03:18 PM
Attachments:
vb_labview_error_message_1.JPG ‏14 KB
VB_to_LV.zip ‏10 KB

I sure hope OP has solved it by now.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Problem about updating to Mac OS X 10.5.3

Hi there,
I just bought my Macbook two months ago. I encounted a problem about updating it to the latest version of MAC OS X. The system reminded me to restart, I proceed. Everythig looked just fine until a poping up window shown "Mac OS X 10.5.3 pacakage can not be validated". Dose anyone know what did that mean? How can I update my little mac?

Hi Hummer,
First, welcome to Apple discussions.
To answer your question, your computer checks all downloaded updates before installing them. It does this to make sure it's got the entire file and that the update will install correctly. The fact that validation fails on your machine probably means the file did not download correctly.
To install 10.5.3, simply go to this website, download the "10.5.3 combo update" and then run it on your Mac: http://www.apple.com/support/downloads/

Mac is having some problem about shout down, it stops sometimes and i need to turn off . My doubt is 3 weeks ago , i found 2 trojans virus and i have already deleted in the adobe flash , i have already uninstalled it too. Help me

So, I have jus bought it .
I heard that mac is exposed to virus, then i found virus on flash "trojan" .
This sounds is commom? What do I have to do when my computer doesn't work as predictable ?
Do I need to reboot it?
Please help me.

If you elect to install Adobe Flash Player, download it from this site: http://get.adobe.com/flashplayer/
If your Mac is not working as expected, please describe the symptoms and include as much detail as possible. The very last thing you should suspect on a Mac is a virus. Installing "anti-virus" junk in an effort to fix your Mac is almost guaranteed to make things worse.
OS X already includes everything it needs to protect itself from viruses and malware. Keep it updated with software updates from Apple.
What do I have to do when my computer doesn't work as predictable ?
Since your Mac is new, you should be contacting AppleCare to discuss any concerns rather than seeking help from strangers on this user-to-user support forum.
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgement, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

AD account Login problem with MAC 10.6.8

Hi All,
We have around 50 odd MAC that are connected to windows server 2008 R2. the user were logining in to these MACs using their AD account. Recently few of the random MAC did not allow the user to login using their AD account.When analyzed though the MAC shows that it has connected to the Domain and the server is active with green button it has unbind itself from the server.I had to login in as local user bind the MAC back to get this resolved.
Now the same has started happeneing for most of the MAC that we have and every morning I have login as local Admin and unbind / bind the MAC with the server. this gets reset once the user reboots or shutsdown.
Have tried with few of the below solution but nothing helped:
Solution 1:
<key>mdns_timeout</key>
<integer>2</integer>
The integer value is in seconds; changing it to at least 5 should allow the Mac OS X client to reconnect to the Active Directory domain after a network interruption. In some configurations, a larger timeout value may be required.
You can change this value by using the sudo command and a text editor to edit the preference file directly. Or you can use the Terminal command below, making sure to enter it all on a single line:
sudo /usr/libexec/PlistBuddy -c 'Set :mdns_timeout 5' /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist
Solution 2:
I have seen all of the probable solutions and tried everything and still I am getting issues with 10.6.6 and after rebooting the Mac gets unbind. Or the Mac gets Network Accounts Available even when not accessing the list of users from AD. But the thing that I have done that has solved all my issues with AD on the Macs is to uncheck the box to search on all domains. For some reason I am seeing that when the Macs have this option checked, it searches through out the forest on the same domain controller more than once, so AD stops the handshaking of the authentication.
I hope this helps like it did on our Network, since then I have not seen the Macs lose the binding or slow SMB.
If you've tried this please let us know.
TIP: Uncheck Allow Authentication from any domain for Mac AD problems
Wednesday, April 20, 2011
Steven Wells sent a fix and an explanation of problems with Macs losing their binding to Active Diretory:
Unchecking "Allow authentication from any domain in the forest" is working at our college. We have been beating our heads on this for about 2 terms, with no understanding of why it works in some places and not in others. When we found this working, our IT guy said that the Security SID is being duplicated, when it looks in other domain forest, and that is what is causing the problem. This is the first time I have found an explanation for the problem.
If you've tried this approach please let us know.
Solution 3:
Solved it. Create a file in Textedit with the name 'auto_master' (no file extension) with the following contents:
# Automounter master map
+auto_master # Use directory service
/net -hosts -nobrowse,hidefromfinder,nosuid
/home auto_home -nobrowse,hidefromfinder
#/Network/Servers -fstab
/- -static
Place this in /etc/ folder
Hope this helps
solution 4:
TIP: a Kerberos fix for OS X 10.5 and 10.6 binding to Active directory
Friday, November 11, 2011
Mehdi Mafi forwarded a fix he found for problems with Leopard and Snow Leopard binding to Active Directory:
This was taken from Dane Riley's imaging building for DeployStudio.
With Mac OS X Leopard every Mac is now running a KDC (Kerberos Distribution Center). Basically each imaged machine is using the same security certificate and hash. Deploying a single image will deploy the same KDC to every system. This [Apple] article covers how to reset the local KDC so that each system is unique. Basically, do the following:
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
After deployment, perhaps using Apple Remote Desktop to all systems, re- establish the KDC by typing sudo /usr/libexec/configureLocalKDC
If you've tried this approach with Mac OS X 10.5, 10.6, or even Lion, please let us know. .
TIP: More on a kerberos fix for AD binding problems
Monday, November 14, 2011
Mehdi Mafi updated his Friday report about Mac OS X 10.6 problems binding to Active Directory:
You may want to add this. If the Mac keeps unbinding from AD (people can't log in to a Mac), here is how to fix it:
Unbind it from Domain
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
Re-establish the KDC by typing sudo /usr/libexec/configureLocalKDC
Bind it to domain again ( When you bind, uncheck allow authentication from any domain in the forest in: Directory Utilitiy-> Advanced Options\Administrative ) this fix the issue that sometimes it can' find AD under search space.
If you tried this please let us know.
Solution 5:
For Snow Leopard AD login issues, use upper case domain
Solution 6: for .local
To create this StartupItem, create the following directory as root:
/Library/StartupItems/FixADAuth
Then chown it to root:wheel and chmod it to 755. These must also be the owner/permissions on the two files it will contain, below:
Contents of our /Library/StartupItems/FixADAuth/FixADAuth:
#!/bin/bash
. /etc/rc.common
date > /var/log/FixADAuth.log
n=0
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local; n=$(($n+1))
done
echo Authentication successful: $AuthSuccess >> /var/log/FixADAuth.log echo Operation count: $n >> /var/log/FixADAuth.log
date >> /var/log/FixADAuth.log
Contents of our /Library/StartupItems/FixADAuth/StartupParameters.plist:
Description = "Fixes Active Directory authentication issue";
Uses = ("Disks");
Obviously you'll need to change "middlewich.local" to your own domain name (and the network interface name if your connection is wireless). The script checks to see if it can see the user "Administrator" on the domain, as he's a fairly common bloke, but if you've renamed yours for security reasons then pick another one. I've also included some logging functionality for debug purposes, so you can verify how well the script is working if you need to and time it in your environment before telling the users how long to wait. The /var/log/FixADAuth.log file will contain the date/time the process started, the success variable set to 1 (just to verify), how many DNS operations were required to fix the problem, and the date/time it ended. For us the time difference is normally about +30-40 seconds with around 120-180 operations taking place. Once you're happy with the script, you can strip it down to its bare functionality if you like, like so for us:
#!/bin/bash
. /etc/rc.common
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local
done
I hope this helps someone!
Regards

You are welcome.
But the question is 10.6 mac just like 10.6.8 , as long as its the same and works.
Yes. You can save some updates by using the combo update.
10.6.8 Combo Updater

Email Problem with Mac

Hi, I am new to FIOS so I hope this is the proper board to post in. I set up 2 subaccounts for verizon.net email and configured them for my Mac Mail program. Everything worked well for about 2 days, and all of a sudden the Mail program keeps asking for my password (even though it was saved in my Mail settings) and says the the incoming mail server is offline. I've Googled this issue and see that others have posted about the same authentication error. Has anyone else here experienced - and solved - this problem? Thanks.

I am having the same problems with Mac eMail. I have two Macs, one that is running Lion and the other is running Snow Leopard. I have spent days on the phone with Apple and Verizon and they are blaming each other and neither have a solution. Have you been able to get a response? It looks like this is something that happens from time to time but never really gets fixed.
Please let me know if there has been a fix since the Mac Mail update in July? With the Union Issues Verizon doesn't have enough people to address the issues both in person ( I had a tech come to the house and he didn't know anything about software ) or on the phone. They keep kicking it back to Apple. I also have a couple iPhones and both are working fine. So this seems to be OS X specific. I've had Macs and iPhones for 3 years or more.
Just makes me think something was done to the mail servers they didn't get correct.

Problems installing Mac OS X 10.5.7

I know next to nothing about Mac's so any help would be much appreciated.
I recently purchased a copy of SIMS 3.
Initially, It wouldn't let me install the game unless I upgraded to Mac OS X 10.5.3
I downloaded this and installed in without any problems. I then installed the game, but it said that in order for everything to run at optimum efficiency- I needed Mac OS X 10.5.7
I proceeded without installing the update but about 30 mins into playing the game crashed- so I thought it would be prudent to go ahead and get the latest version.
I downloaded it, however when I go to install it- I get the following message:
You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update.
Can someone PLEASE PLEASE HELP!!!!! This is starting to do my head in!!! : )

Hi MaxHerrick
1. Using the game disk uninstall the game.
2. Go to Applications Utilities and open Disk Utility then select the Macintosh HD and Repair Disk Permissions. http://support.apple.com/kb/HT1452
3. Open the link below, download and install the 10.5.7 Combo update:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1057comboupdate .html
4. Rerun Repair Permissions in step 2. again.
5. Now install the game.
Dennis

Fixing permissions problem on Mac OS that impedes start of Adobe applications

See this article for a suggestion for how to deal with a cause of After Effects (and other applications) taking a long time to start on Mac OS:
fixing permissions problem on Mac OS that impedes start of Adobe applications
This same issue also affects the functioning of Dynamic Link and warnings regarding QuickTime not being installed.

"Later I used DirectoryChooser. This is working fine but the pop-up is always coming behind javafx applet when started in browser. Note: This is working fine if we run as stand alone applicationYou should file a bug/feature request about this against the Runtime project:
http://javafx-jira.kenai.com
Exception in thread "AWT-AppKit" java.awt.HeadlessExceptionSee:
http://javafx-jira.kenai.com/browse/RT-20784 "Mac: Headless environment issue, MacOSX"
The above issue discusses some potential workarounds which may (or may not) work in your situation.
Try the latest 8-ea build (available at http://jdk8.java.net/download.html).
The graphics environment is no longer forced to be headless in the java 8 trunk (the jira case I linked is closed as fixed), but it may take a week or two for the fix to propagate to the jdk8 early access download page.
Also note that this kind of call from a JavaFX application to a Swing component isn't really a supported configuration (embedding JavaFX in a JFXPanel in a Swing application is supported, but other forms of interaction between JavaFX and Swing such as JavaFX opening Swing dialogs are not). That's not to say that it might not work, it's just that you shouldn't expect it to work now or continue to work in the future (especially in an applet deployment context where the window handling is more complex for the underlying frameworks due to the browser embedding). Further facilities to ease Swing and JavaFX integration are planned for JavaFX 8 (http://javafx-jira.kenai.com/browse/RT-12100 "Swing components inside JavaFX"), but I don't know if it would mean that the scenario you are trying to achieve would be supported.
A further alternative you might have would be to deploy your application as a Swing application rather than a JavaFX application and wrap your JavaFX content in a JFXPanel. It is likely that opening a Swing JFileChooser would work in such a mixed code scenario, though I have not tried it.

PCSC.framework: SCardControl problems on Mac OS X 10.5

Hi all,
There are three problems about SCardControl API on Mac OS X 10.5 PCSC.framework:
1. Whether the size of parameter pbRecvBuffer has the length limited in PCSC.framework? When I use the SCardControl, if the size of pbRecvBuffer is longer than 256*8 bits, SCardControl can not recieve anyting from pbRecvBuffer. It just is hanged on and returns 0x80100013 after 2 minutes.
2. Whether the size of parameter pbSendBuffer has the length limited in PCSC.framework? When I use the SCardControl, if the size of pbSendBuffer is longer than 1976*8 bits, the pcscd daemon will collapse.
3. Whether the SCardControl will timeout when it doesn't recieve anything from driver after 2 minutes.
Kind regards!

Hi MaxHerrick
1. Using the game disk uninstall the game.
2. Go to Applications Utilities and open Disk Utility then select the Macintosh HD and Repair Disk Permissions. http://support.apple.com/kb/HT1452
3. Open the link below, download and install the 10.5.7 Combo update:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1057comboupdate .html
4. Rerun Repair Permissions in step 2. again.
5. Now install the game.
Dennis

Problems with "Mac Help"

My help files, especially "Mac Help", no longer work properly since upgrading to Tiger. If I open "Mac Help", for example, the help window will pop up, but the links will not work (nothing happens when I click on them) and the search feature in help will not work either (the little gray "clock" just spins next to the help bar and nothing else ever happens). Any suggestions on this one? As I'm a relatively recent Mac convert, the help feature was something that I came to rely on. Thanks!

Hi CP,
This is a common problem with Mac Help. When it happens, try first (quit Help) deleting this folder:
Home/Library/Caches/com.apple.helpui
If Help still doesn't work, try then deleting those files:
Home/Library/Preferences/com.apple.helpviewer.plist
Home/Library/Preferences/com.apple.help.plist
(and this one if you find it):
Home/Library/Preferences/com.apple.helpui.plist
See also this KB article for more info
- Mac OS X 10.2, 10.3: Mac Help Viewer unexpectedly quits
and this excellent X Lab FAQ
- Troubleshooting Help Viewer
It seems (not sure about that), that Help caches get easily corrupted when interrupting searches instead of patiently waiting for its internet accessings etc?
Good luck!
Axl

A problem about build project fail...

Hi all, I'm fairly new to iPhone programing and now get a problem about build project fail. ><
I've downloaded a couple of sample codes from Apple web site and build them, but there are some errors messages as below...
Could some body help me to handle this problem?? I'll be very appreciated~
================================ Error msg of "MoveME" sample ============================
Building target “MoveMe” of project “MoveMe” with configuration “Debug” — (21 errors, 1 warning)
Checking Dependencies
warning: couldn't add 'com.apple.XcodeGenerated' tag to '/Volumes/MoveMe/build/MoveMe.build': Error Domain=NSPOSIXErrorDomain Code=2 UserInfo=0x33ba1f0 "Operation could not be completed. No such file or directory"
error: unable to create '/Volumes/MoveMe/build' (Read-only file system)
error: unable to create '/Volumes/MoveMe/build' (Read-only file system)
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
warning: couldn't add 'com.apple.XcodeGenerated' tag to '/Volumes/MoveMe/build/MoveMe.build': Error Domain=NSPOSIXErrorDomain Code=2 UserInfo=0x33ba1f0 "Operation could not be completed. No such file or directory"
error: unable to create '/Volumes/MoveMe/build' (Read-only file system)
error: unable to create '/Volumes/MoveMe/build' (Read-only file system)
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
Unable to create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
<com.apple.tools.info-plist-utility> Info.plist -genpkginfo /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/PkgInfo -expandbuildsettings -o /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/Info.plist
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
error: The file “PkgInfo” does not exist.
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
error: The file “PkgInfo” does not exist.
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Volumes/MoveMe/Default.png /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
pbxcp: error: open(): /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/Default.png [/SourceCache/pbxtools/pbx_tools-1059/pbxcp/fileutils.m:392]: No such file or directory
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Volumes/MoveMe/Placard.png /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
pbxcp: error: open(): /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/Placard.png [/SourceCache/pbxtools/pbx_tools-1059/pbxcp/fileutils.m:392]: No such file or directory
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Volumes/MoveMe/DisplayStrings.strings /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
pbxcp: error: open(): /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/DisplayStrings.strings [/SourceCache/pbxtools/pbx_tools-1059/pbxcp/fileutils.m:392]: No such file or directory
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/MainWindow.nib /Volumes/MoveMe/MainWindow.xib
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
/* com.apple.ibtool.errors */
Internal Error:
Description: Compilation failed. Unable to write to path: /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/MainWindow.nib
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Volumes/MoveMe/Icon.png /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
pbxcp: error: open(): /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/Icon.png [/SourceCache/pbxtools/pbx_tools-1059/pbxcp/fileutils.m:392]: No such file or directory
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/MoveMeView.nib /Volumes/MoveMe/MoveMeView.xib
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
/* com.apple.ibtool.errors */
Internal Error:
Description: Compilation failed. Unable to write to path: /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app/MoveMeView.nib
error: couldn't create directory /Volumes/MoveMe/build/Debug-iphonesimulator/MoveMe.app: Read-only file system
mkdir /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386 (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.0 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=c99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -D_IPHONE_OS_VERSION_MINREQUIRED=20000 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.0 .sdk -fvisibility=hidden -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-ge nerated-files.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- own-target-headers.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- all-target-headers.hmap -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-pr oject-headers.hmap -F/Volumes/MoveMe/build/Debug-iphonesimulator -I/Volumes/MoveMe/build/Debug-iphonesimulator/include -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Derived Sources -include /var/folders/bW/bWmyU-LjHBKBRZqhplPNE++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/MoveMePrefix-chaljwmdesvmdlfdlkpiazlaoxmy/MoveMePrefix.pch -c /Volumes/MoveMe/main.m -o /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/main.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
{standard input}:unknown:FATAL:can't create output file: /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/main.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
mkdir /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386 (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.0 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=c99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -D_IPHONE_OS_VERSION_MINREQUIRED=20000 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.0 .sdk -fvisibility=hidden -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-ge nerated-files.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- own-target-headers.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- all-target-headers.hmap -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-pr oject-headers.hmap -F/Volumes/MoveMe/build/Debug-iphonesimulator -I/Volumes/MoveMe/build/Debug-iphonesimulator/include -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Derived Sources -include /var/folders/bW/bWmyU-LjHBKBRZqhplPNE++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/MoveMePrefix-chaljwmdesvmdlfdlkpiazlaoxmy/MoveMePrefix.pch -c /Volumes/MoveMe/Classes/MoveMeAppDelegate.m -o /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/MoveMeAppDelegate.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
{standard input}:unknown:FATAL:can't create output file: /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/MoveMeAppDelegate.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
mkdir /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386 (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.0 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=c99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -D_IPHONE_OS_VERSION_MINREQUIRED=20000 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.0 .sdk -fvisibility=hidden -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-ge nerated-files.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- own-target-headers.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- all-target-headers.hmap -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-pr oject-headers.hmap -F/Volumes/MoveMe/build/Debug-iphonesimulator -I/Volumes/MoveMe/build/Debug-iphonesimulator/include -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Derived Sources -include /var/folders/bW/bWmyU-LjHBKBRZqhplPNE++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/MoveMePrefix-chaljwmdesvmdlfdlkpiazlaoxmy/MoveMePrefix.pch -c /Volumes/MoveMe/Classes/PlacardView.m -o /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/PlacardView.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
{standard input}:unknown:FATAL:can't create output file: /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/PlacardView.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
mkdir /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386 (error: Read-only file system)
cd /Volumes/MoveMe
/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc-4.0 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=c99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -D_IPHONE_OS_VERSION_MINREQUIRED=20000 -isysroot /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator2.0 .sdk -fvisibility=hidden -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-ge nerated-files.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- own-target-headers.hmap -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe- all-target-headers.hmap -iquote /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/MoveMe-pr oject-headers.hmap -F/Volumes/MoveMe/build/Debug-iphonesimulator -I/Volumes/MoveMe/build/Debug-iphonesimulator/include -I/Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Derived Sources -include /var/folders/bW/bWmyU-LjHBKBRZqhplPNE++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/MoveMePrefix-chaljwmdesvmdlfdlkpiazlaoxmy/MoveMePrefix.pch -c /Volumes/MoveMe/Classes/MoveMeView.m -o /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/MoveMeView.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
{standard input}:unknown:FATAL:can't create output file: /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386/MoveMeView.o
error: couldn't create directory /Volumes/MoveMe/build/MoveMe.build/Debug-iphonesimulator/MoveMe.build/Objects-n ormal/i386: Read-only file system
Build failed (21 errors, 1 warning)

Ya, something like that...
I'm even new to Mac, thanks for your answer ^^"

Crucial M4 SSD MBP "There was a problem installing Mac OS X" Try Reinstalling

So I have an extra ssd. I decide to put it in my MPB mid or late 2009 to give it some extra life.
I am doing a fresh install from a thumb drive. The macbook find the partition and boots into the installer. about 10 seconds into progress bar this appears: "There was a problem installing mac os x" Try reinstalling.
The progress bar goes away.
The thumb drive is good... it installed on my mother's laptop just fine.
I have the ssd in the place of the old Hdd until my adapter comes around to put one of them in the opti bay.
Does anyone have any ideas or has seen this before?

I forgot to mention a fresh mountain lion install. The M4 has latest firmware as of today.

Request for advice - problem networking mac mini without airport express

Hi - grateful for any help on this one.
I've just upgraded from an original (May '05) mac mini to a new 20" G5 (intel dual core) which I've set up on a wireless (airport express) network. The new machine and network are working fine but I've been trying to set up the old mac mini in a different room as a second machine for work and have been having problems.
The mac mini is the basic version without airport/bluetooth. After some mix up at the Apple Store over retro fitting an airport express the genius I spoke to recommended getting a D-link USB wireless adapter. I bought a D-link DWL-122 installed it (and after a crash course in the difference between WPA and WEP) got it running okay on the network. Unfortunately the D-link driver software appeared to wipe out the Spotlight index and stopped my HP printer being recognised. A couple of bulletin boards I googled suggested this was a common problem but I haven't been able to find any with a solution. In the end I had to wipe the hard drive and re-install from scratch to get the printer and spotlight working again.
So I have two questions: is there a way to make the D-link work (the d-link website has no faqs, update drivers or other info about Mac bugs) or, if not, then what should I buy instead to access my wireless network reliably? Would I be better getting something that plugged straight into the mac mini's ethernet port? If so, what? And grateful for any recommendations about which products and their software are most reliable.
Any advice gratefully received.
Thank you!
Chris

Hi,
You should of been able to use the Airport Express to solve the issue you are having. The Airport Express (small white brick shaped) is designed to work as a stand alone router or as a wireless extension to an existing wireless network.
So the setup would be from the mini as follows:
Mac Mini ---> Airport Express (AirPort Express Extends wireless connectivity) ---> Wireless Router (Airport Extreme, etc) ----> Cable/DSL Modem.
Hope that helps.

While trying to restore os x and erase content, some problem about voice software came up and the computer asked me to restart and try again by clicking restart button. When I did this, the machine went to a gray start up screen and will not progress.

While trying to restore os x and erase content on my MacBook pro, some problem about voice software came up and the computer asked me to restart and try again by clicking restart button. When I did this, the machine went to a gray start up screen with an apple and will not progress. I've waited more than 30 minutes and tried restarting again by holding the power button. Also, restore cd 1 will not eject so the computer will no longer move past the gray screen with spinning circle. Restore CDs had never beeused and were still in packaging in the original box. Ran hardware test just to check, and it came back as normal. Now what? I live nowhere near a genius bar :(

computer asked me to restart and try again by clicking restart button.
That's called a kernel panic...
Since the install disc won't eject, try starting up while holding down the C key. If the Mac won't boot while holding down the C key, try ejecting disc by either holding down the mouse while starting up or holding down the Eject key while starting up.
Try booting from your install disc so you can run Disk Utility in case the startup disk needs repairing.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.
What is a kernel panic
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics

Problem about Mac Os X 10.6.3 V.S Labview 2009

Similar Messages

Maybe you are looking for