Problem- Accessing java script code in java

i want to access java script variable in java code.
Is it possible through any method or function?
help me.

Stick to your old thread.
http://forum.java.sun.com/thread.jspa?threadID=777985

Similar Messages

I am still having problems accessing java script sites. Anyone else having this problem?

I am still having problems accessing java script sites. Anyone else having this problem?

Javascript can be left on, but Java (which is something very different) should generally be turned off.
Apple barred Java from running on Macs, leaving companies that rely on Java plug-ins out in the cold.
Apple blocked Java 7 Update 11 by adding it to the banned list in XProtect.
This was the second time in two weeks that Apple has blocked Oracle's code from running on Macs. This time Java is blocked through Apple's XProtect anti-malware feature.
Java has come under fire as the means by which hackers have been able to gain control of computers. In April 2012 more than 600,000 Macs were reported to have been infected with a Flashback Trojan horse that was being installed on people's computers with the help of Java exploits. Then in August Macs were again at risk due to a flaw in Java, this time around, there was good news for Mac users: Thanks to changes Apple has made, most of us were safe from the threat.
Unwilling to leave its customers open to potential threats Apple decided it's safer to block Java entirely.
Macs running OS X Snow Leopard and beyond are affected.
UPDATE for those running Lion or Mountain Lion:
Oracle on Friday February 1 released a new version reportedly addressing vulnerabilities seen with the last build.
Apple disabled Java 7 through the OS X XProtect anti-malware system, requiring users to have at least version "1.7.0_10-b19" installed on their Macs. The release dated February 1 carries the designation "1.7.0_13-b20," meeting Apple's requirements.
Oracle "strongly recommends" applying the CPU fixes as soon as possible, saying that the latest Critical Patch Update contains 50 new security fixes across all Jave SE products.
Update foror Snow Leopard users:
Apple have issued update 12 for Java for OS 10.6:
http://support.apple.com/kb/DL1573
Note: On systems that have not already installed Java for Mac OS X 10.6 update 9 or later, this update will configure web browsers to not automatically run Java applets. Java applets may be re-enabled by clicking the region labeled "Inactive plug-in" on a web page. If no applets have been run for an extended period of time, the Java web plug-in will deactivate.

Problem accessing variables from java file to JSP page

Hello Everyone,
I have small problem accessing my method variables from my java bean file to a JSP page. can some please take a look and tell me why I can't populate my JSP page, I've been trying all day to get this done!!!
This is my Java file
package dev;
import java.io.*;
import java.util.*;
public class RoundDetail2
public String string_gameID;
public int string_card1;
public String readDetail_topLayer;
public static final String SUITS[] = {" ", "Clubs", "Hearts", "Spades", "Diamonds", "Joker", "FaceDown"};
public static final String VALUES[] = {"Joker ","Ace", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight", "Nine", "Ten", "Jack", "Queen", "King"};
public static final String SuitVALUES[] = {" ","1","2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14"};
public RoundDetail2() throws FileNotFoundException
DataInputStream inFile=
             new DataInputStream(
                new BufferedInputStream(
               new FileInputStream("C:/apps/jakarta-tomcat-4.0.6/webapps/ROOT/WEB-INF/classes/dev/Data_452SY2.txt")));
try {
             while((readDetail_topLayer = inFile.readLine()) != null)
          StringTokenizer tokenizer_topLayer = new StringTokenizer(readDetail_topLayer,"\t", true);
               while (tokenizer_topLayer.hasMoreTokens())
                    string_gameID = tokenizer_topLayer.nextToken();
     catch(IOException e)
                System.out.println(e.getMessage());
     Thanks KT

......How are you declaring the class in your JSP? ... are you instantiating it as a bean using the useBean tag, or just instantiating it in your code like normal.
Maybe you could post the relevant JSP code too?
Hello again,
Only the last string is populating after the file has be tokenized. What I'll like to accomplish is passing the very first string in the file. I did not get too far in the JSP file setup because the code is still in it's testing stage, but any help will be highly appreciated.
Here is the JSP code
<%@page import="dev.*" %>
<%@page session="true" language="java" import="java.io.*" %>
<jsp:useBean id="wagerhist" scope="request" class="dev.RoundDetail2" />
<html>
<head>
<title>Round Detail</title>
<body>
<table width="530" bordercolor="#000000" valign="top">
    <tr>
          <td align="left" width="19%">Game ID<%=wagerhist.string_gameID%></td>
          <td align="left" width="30%"> </td>
          <td align="left" width="20%">card1</td>
          <td align="left" width="31%"> </td>
        </tr>
</table>
</body>
</html>

Java script code missing' comes up in a window when I try to batch process my images in photoshop.

I have an imac version 10.9.4, Photoshop cs5.1. I'll select file-script-image processor and that is when the 'java script code missing' pops up. It used to work before I upgraded to the version 10.9.4. I called Apple and they don't know what to do. Now I'm here on the community site hoping someone can help. Not being computer savvy I don't understand anything I try to read about it.

I finally found out that my 'McAfee SiteAdvisor' add-on was causing the problem for me. You can either disable it from your add-ons by clicking on tools, then add-ons and then disable it from your list of add-ons, or if you still wish to use it like I do, you can unistall it from your add-on list, and then download it from the official McAfee web site and then simply reinstall it... Since I've done this my firefox been loading faster, no annoying pop-up window when I launch or open a new tab. It was also crashing quiet often before I did this and that seemed to be fixed now.
here is the link for the McAfee SiteAdvisor download from the official McAfee web site if anyone needs to download it again like I had to.
http://us.mcafee.com/root/product.asp?productid=sa

We encountered a problem during use the Configtool access JAVA engine.

We encountered a problem during use the Configtool access JAVA engine.
Our environment of system as below:
HardWard: IBM i570
OS: IBM as/400 V5E3
DB: DB2/400
Application system:SAP XI 3.0
The problem we encountered as below:
Our company used XI 3.0 SR1 for exchange data between SAP R/3 and no-sap system.For now,we wanna create a backup system(for
offline recovery),so we backup the XI product system throught entiry system save in AS/400(we stopped the XI system before
save process start).And following,we restored from the tape that we save from XI product system to the new backup system(they
are whole different paratition),but the problem is coming.Describe as following item:
1. The application seem to can be started but the java node always restart circularly(We have 4 java node now),I think
because of different of hardware configure(between XI product and Backup system) and lack of hardware resource.(XI prduction
have 5 CPUs and 22G Mem,Backup system have 2 CPUs and 16G MEM ).Therefore we wanna decrease the number of java nodes for
start application in backup system(throught configtool).
2. We wanna use configtool to decrease the java nodes for start backup system.But we encountered a problem during running the
configtool ,the information of prompt dialog as following:
Error occurred while working with Configuration (Scanning).
Msg:Error while connecting to DB.
We also see the system.log that below the directory of usr\sap\PXI\DVEBMGS00\j2ee\configtool,and found some error as
following text:
#1.5#C0000A0008A8000000000000017A906E000423BFFC7246E0#1165207387826#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[addLog()]#######Thread[main,5,main]##0#0#Info##Java#TC_LOGGING_CONFIGURATION_NEW_ITEMS
[C0000A305666000000000002018FB1F70003D67C779ECE88]##The () has been added to the !#3#Log#.
system.log#/System#
#1.5#C0000A0008A8000000000001017A906E000423BFFC73A670#1165207388006#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_jce_export.jar#
#1.5#C0000A0008A8000000000002017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_jsse.jar#
#1.5#C0000A0008A8000000000003017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_smime.jar#
#1.5#C0000A0008A8000000000004017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
iaik_ssl.jar#
#1.5#C0000A0008A8000000000005017A906E000423BFFC73CD80#1165207388016#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###ConfigurationManager: found jar for secure store
Z:
sapmnt
PXI
global
security
lib
tools
w3c_http.jar#
#1.5#C0000A0008A8000000000006017A906E000423BFFC9C25A0#1165207390660#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]
##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the
has been changed from to )!#5#resource bundle
name#LogController#com.sap.security.core.server.secstorefs.SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStore
FSResources#
#1.5#C0000A0008A8000000000007017A906E000423BFFC9C4CB0#1165207390670#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]
##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the
has been changed from to )!#5#resource bundle
name#LogController#/System/Security/SecStoreFS#<null>#com.sap.security.core.server.secstorefs.SecStoreFSResources#
#1.5#C0000A0008A8000000000008017A906E000423BFFCAC7D38#1165207391731#/System/Server##com.sap.engine.core.configuration#######T
hread[main,5,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###OpenSQLDataSource successfully created with secure
store.#
#1.5#C0000A0008A8000000000009017A906E000423BFFCDA3070#1165207394726#/System/Configuration/Logging##com.sap.tc.logging.APILogg
er.LogController[setResourceBundleName(String resourceBundleName)]#######Thread[main,5,main]
##0#0#Info##Java#TC_LOGGING_CONFIGURATION_IS_CHANGED[C0000A305666000000000000018FB1F70003D67C779CD2B8]##The for the
has been changed from to )!#5#resource bundle
name#LogController#/System/Database/sql/jdbc#<null>#com.sap.sql.log.OpenSQLResourceBundle#
#1.5#C0000A0008A800000000000A017A906E000423BFFCDB41E0#1165207394796#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnect
ionFactory#######Thread[main,5,main]
##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error
occurred on connection : code={0,number,integer}, state="", message="".#5#-99999#08001#The application requester
cannot establish the connection. (XIPRD)#jdbc:as400://XIPRD/SAPPXIDB;transaction isolation=read uncommitted;data
truncation=true;date format=jis;time format=jis;sort=hex;hold input locators=true;hold statements=true;cursor
hold=false#<null>#
The "SQL error occurred on connection" happened during start run configtool.
We don't know how to solve this problem.
Thanks

I am unable to start my configtool.bat to administer JVM memory settings for my J2EE.
Wait......
Thanks

How to Use the JAVA SCRIPT code in .htm page of the component

Hi .
In my requirement i have to use Java Script Function in .htm code ..how to use the java script code and functions in .htm???
thank you
B.Mani

Check this document [Arun's Blog|http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebClientUI-TalkingwithJava+Script]
Regards
Kavindra

Java Script Code not working properly for visios in sharepoint 2013

Hi all ,
I have few visios and I am using the visio web part to display and to redirect from one visio to other visio I am using the java script code through content editor web part .
In share point 2010 it's working fine , I was able to redirect to all the visios and code is working fine .
In share point 2013 its not the same , Its not working properly . only for the first time the code is working fine . once it goes to next visio the code stops working .
For example if i click in visio A it gets redirect to Visio B and its stops working , it wont allow to do any other steps .
I have checked with the URL its correct , I am not able to find any error also .
Indresh

This will be likely caused by the Minimal Download Strategy not registering the Javascript on the page reload. You can turn off the MDS feature to test this.
You can either turn off MDS in your site, or register your Javascript functions with MDS to ensure they are called. To do this, you'll need all of your code to be wrapped in a javascript file (Embed this on the page using a <script> tag and
inside that file in a function, which you then register with MDS as follows (I usually do this in the first line of the javascript file):-
RegisterModuleInit("/SiteAssets/YourJavaScriptFile.js", NameOfYourFunction);
Regards
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

How to Include JAVA script code in SAP BI7 web Reporting?

How to Include JAVA script code in SAP BI7 web Reporting?

In nw2004s there is a new web item called "Script" web item which lets you add javascript code. When you add javascript code in this web item, you don't need the opening and closing <script> tags...
Hope it Helps
Chetan
@CP..

How to Access UNIX scripts using Java

folks,
Is there any way we can access UNIX scripts or CRON Jobs in java, I am planning to come up with some monitoring tool for our application and in these i need to monitor the UNIX scripts whether its running or not ,
Let me know if any of you guys done this,
Regards
Mathew

Check the java.lang.Runtime object and exec(...) methods.
Marc

Access Java Proposals for a java source code programmatically

Hi,
Problem
Programmatically get java proposals for a java source code (not byte code) via eclipse bundle
Description
I am developing one eclipse osgi bundle to correct java source code automatically. I am running osgi bundle inside eclipse itself [Version: Mars Release (4.5.0)]. I am able to get java project object and a class object inside it which I want to correct. Every time I try to collect java code proposals as I put one test file which can be corrected (like duplicate imports), I receive below error:
Java code line
JavaCorrectionProcessor.collectCorrections(context, new IProblemLocation[] { problem }, proposals);
Error description
!ENTRY org.eclipse.jdt.ui 4 2 2015-07-27 18:57:09.196
!MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.jdt.ui".
!STACK 0
java.lang.IllegalStateException: Workbench has not been created yet.
at org.eclipse.ui.PlatformUI.getWorkbench(PlatformUI.java:93)
at org.eclipse.jdt.internal.ui.javaeditor.ASTProvider.install(ASTProvider.java:236)
at org.eclipse.jdt.internal.ui.javaeditor.ASTProvider.<init>(ASTProvider.java:227)
at org.eclipse.jdt.internal.ui.JavaPlugin.getASTProvider(JavaPlugin.java:741)
at org.eclipse.jdt.ui.SharedASTProvider.getAST(SharedASTProvider.java:128)
at org.eclipse.jdt.internal.ui.text.correction.AssistContext.getASTRoot(AssistContext.java:119)
at org.eclipse.jdt.internal.ui.text.correction.LocalCorrectionsSubProcessor.addUnusedMemberProposal(LocalCorrectionsSubProcessor.java:669)
at org.eclipse.jdt.internal.ui.text.correction.QuickFixProcessor.process(QuickFixProcessor.java:530)
at org.eclipse.jdt.internal.ui.text.correction.QuickFixProcessor.getCorrections(QuickFixProcessor.java:316)
at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor$SafeCorrectionCollector.safeRun(JavaCorrectionProcessor.java:378)
at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor$SafeCorrectionProcessorAccess.run(JavaCorrectionProcessor.java:339)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor$SafeCorrectionProcessorAccess.process(JavaCorrectionProcessor.java:335)
at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor.collectCorrections(JavaCorrectionProcessor.java:468)

Any code from org.eclipse.jdt.ui (or the non-API code in org.eclipse.jdt.internal.ui) is likely to require a running workbench. Only the code from org.eclipse.jdt.core is guaranteed to work headlessly.

Transaction code to access java editor

hi
i would like to know the transaction code to access java editor

Hi,
Never heard of anything like transaction code to open java editor. As mentioned above in one of the responses, best way to write java code is using NWDS.
However, if you are good at java and do not require assistance in methods and class selections while coding, then you could develop your code in editors like Editplus and then use NWDS to deploy the code on server.
However, for creation of java projects (with supporting jars, ears etc.), NWDS is very good option.
Thanks,
Bhavish

Early 2008 mac pro 8 core quicktime videos opening in java script code

When I try to view a quicktime video it opens in Java Script Code instead of playing the video on my early 2008 Dual Quad Core 2.8 Ghz. Mac Pro running OSX 10.5.8

That's not much to go on, but I doubt it has anything to do with it being a Mac Pro. Select the clip and Get Info (Cmd I) to see what application is named in the "Open with" drop down menu. If it is anything other than QuickTime player, change it and try again. Also, repair your permissions...

Problem with Java and Windows (Mainly Vista and UAC)

Hi all,
I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an installer for a windows baised systems using NSIS to install the software files. I made the installer as I need several java packages to be installed so the program would work (JAI, J3D, JAI ImageIO) and I also require the program to have fileassociations on windows.
I know that this is not what java is about, however the majority of the users will be on windows baised systems so I've decided that OS specific installers is the best option.
During the process I have noticed that there are several key problem with java for this type of application!
The first issue that I have come across is getting file associations to work on java. As a .jar is not an excutable it is not possible to directly associate a filetype with it in java so to overcome this I currently run the program from a .bat files and also the program requires large memory so this also allows me to run the program with -xmx. The batch file that I use is :
<code>
cd PATH TO PROGRAM
start javaw -Dsun.java2d.noddraw=true -Xmn100M -Xms500M -Xmx1000M -jar "PATH TO PROGRAM\program.jar" %1 -vram 134217728
pause;
</code>
Ok so all this appears to work fine and allows windows to have file associations and start the program and thats all works perfectly but this is a non-ideal solution. Has anyone got any advice on improving this?
The next problem that I have appears to be a problem with Vista and UAC (user access control). When a user installs the program and installs the program into the program files directory I found that the program did not work and kept saying that I did not have access to the files in the current directory. This is a problem as I read and write settings files during program execution.
On a Vista system UAC prevents file write operations into the Program Files directory unless the program has requested elevated status even if the user is a full administrator. The probem is that there appears to be no real way to achieve this under java that I'm aware of...
Has anyone else had this probem and has a suitable solution?
Any advice on these issues would realy be appricated.
Regards
Joey

Ok so i've kinda found a solution, its not ideal but its very good. I found this program called Elevate
A link to the site I got it was
http://www.wintellect.com/cs/blogs/jrobbins/archive/2007/03/27/elevate-a-process-at-the-command-line-in-vista.aspx
This program allows you start java with a UAC dialog for high access using
Elevate java -jar myjar.jar
This then allows you to have full access using java... I guess it could be dangerous but it does the job.

Accessing custom tag value in scripting code

Hi All,
How can i access my custom tag value in scripting code?
For example, assuming my tag is <myTag:display value="myValue"/>, how can i System.out this value in scripting code? I wanna do <% System.out.prinln(xxx); %> where xxx should be my custom tag value.
Thanks in advance,
Leo.

I understand that you want to store "myValue" somewhere accesible by scripting. The more easy and portable way is to store that value in an attribute, for instance:
<myTag:display value="myValue" var="myVar" scope="session"/>And in the custom tag code:
// translate scope string to PageContext scope values
pageContext.setAttribute(var, value, scope);This ensures compatibility with Java Standard TagLibrary and EL:
<c:out value="${myVar}"/>And finally, scripting:
<% Object value = pageContext.findAttribute(var); %>

Printing Problems with JAVA

Hello,
I have problems with the following Code.
import java.text.NumberFormat;
import javax.print.Doc;
import javax.print.DocFlavor;
import javax.print.DocPrintJob;
import javax.print.PrintException;
import javax.print.PrintService;
import javax.print.PrintServiceLookup;
import javax.print.SimpleDoc;
public class Printer {
     private PrintService[] printers;
     private int choosenPrinter;
     private StringBuffer text;
      * Der Konstruktor legt einen Array der verfügbaren Drucker an.
      * @param stdPrinter Der aktuell ausgewählte Drucker(-index)
     public Printer(int stdPrinter) {
          printers = PrintServiceLookup.lookupPrintServices(DocFlavor.INPUT_STREAM.AUTOSENSE, null);
          if (printers.length > 0){
               choosenPrinter = 0;
               setChoosenPrinter(stdPrinter);
          } else choosenPrinter = -1;
      * Liefert einen Array mit Namen der verfügbaren Drucker.
      * @return Namen der verfügbaren Drucker
     public String[] getPrinters() {
          String[] retPrinters = new String[printers.length];
          for (int i = 0; i < printers.length; i++) {
               retPrinters[i] = printers.getName();
          return retPrinters;
     * @return Liefert den Index des aktuell ausgewählten Druckera
     public int getChoosenPrinter() {
          return choosenPrinter;
     * Setzt den Index des aktuell ausgewählten Druckers neu,
     * wenn der Index gültig ist.
     * @param choosenPrinter Der neu ausgewählte Index
     public void setChoosenPrinter(int choosenPrinter) {
          if (choosenPrinter <= printers.length) {
               this.choosenPrinter = choosenPrinter;
     * Druckt eine oder mehere Quittungen über die übergebenen Daten
     * @param buchung Buchung die in der Quittung enthalten sein soll.
     * @param haendler Händler der in die Quittung aufgenommen werden soll.
     * @param kunde Kunde der in die Quittung aufgenommen werden soll.
     * @param config Das aktuelle Configobjekt.
     * @param times Anzahl der Quittungen die gedruckt werden sollen.
     * @return true wenn der Druck erfolgreich angestoßen wurde, false sonst
     public boolean printBuchung() {
          if (choosenPrinter == -1) return false;
          PrintService printer = printers[choosenPrinter];
          String ls = System.getProperty("line.separator");
          NumberFormat nf = NumberFormat.getInstance();
          nf.setMaximumFractionDigits(2);
          nf.setMinimumFractionDigits(2);
          text = new StringBuffer();
          if ('T' == 'T') {
               text.append("Q U I T T U N G");
               text.append(ls);
          String temp = text.toString();
          temp = temp.replace("ä", "ae");
          temp = temp.replace("ö", "oe");
          temp = temp.replace("ü", "ue");
          temp = temp.replace("ß", "ss");
          for (int i=0; i<1000; i++) {
               DocPrintJob docPJ = printer.createPrintJob();
               Doc doc;
               doc = new SimpleDoc(temp.getBytes(), DocFlavor.BYTE_ARRAY.AUTOSENSE, null);
               try
               docPJ.print(doc, null);
               catch (PrintException e)
                    return false;
               catch (Exception e)
                    // TODO Auto-generated catch block
                    e.printStackTrace();
          return true;
}The programm sends the printing job to Windows XP but nothing is happend. Have anybody a tip for me?

I tried this and it shut off Firefox accessing the internet. had to uninstall FF and Adobe and do a reinstall to get my internet back up and working. This only effected my browser not my pop3 mail

Problem- Accessing java script code in java

Similar Messages

Maybe you are looking for