Problem accessing oracle11i/UPS api

Hi,
Anyone use oracle11i and ups online tool. I have problem with this, When I connect to the USP online this give me error message like FRM-40735 POST-RECORD trigger raised unhandle expetion ORA-03114.
null

We are seeking to migrate from Oracle 10.7 to R 11i directly. Are there any specific things that we need to worry about. Apparently, others have suggested that we move from 10.7 to 11 and then to 11i. Is this really necessary? We have heavy customization and interfaces to multiple systems. Is this reason for worry?

Similar Messages

  • Access KM using API as predefined user

    Hello, dear experts!
    Currently I am going to use KM as file storage for my application. I want to prevent direct access to KM content for all users and allow them to upload and download files only using my application.
    The problem is:
    I use not context of current user but some user found in UME.
    IUser user = UMFactory.getUserFactory().getUserByLogonID("Administrator");
    com.sapportals.portal.security.usermanagement.IUser ep5User = portalUserFactory.getEP5User(user);
    context = new ResourceContext(ep5User);
    When I try to operate KM (for instance create new folder) I get error: "User <Administrator> is not authenticated"
    But user "Administrator" has all rights to access KM.
    Is it possible to access KM using API as different user? Or is there another way to solve the problem?
    Best regards,
    Anton.

    Hi, Praveen!
    Thank you for your answer. Your code works fine!
    But when I created my own service user "service_user" under Content Management  -> Utilities -> System Principals I cannot get resource context even after restarting servlet engine.
    I get an exception java.security.PrivilegedActionException: com.sapportals.wcm.repository.ResourceException: User management exception: Could not get service user "service_user".
    This user has the same permissions as "cmadmin_service".
    Also user with the same name was created in UME.
    May be I should execute some additional administrating task?
    Best regards,
    Anton.

  • Conditional Mapping with script using BlOCKPROC to access the HFM API

    Hello,
    following problem. During the mapping/validation I need to map certain custom1 members to None if the Top Member is None and let it be if not None. This allocation depends on the account. Reading through the documentation I stumbled across conditional mapping.
    So in the Custom1 map type Like I defined following:
    Rule Name: C1_Script
    Rule Definition: CXXX*
    TargetCustom1: #Script
    In the script I try to achieve to get the Custom1 Top member for the account! The HFM API offers this function(fGetCustomTopMember) and with varValue(14) I get my TargetAccount. So everything I need seems to be there.
    Only problem is I need to use the BlOCKPROC to access the HFM API provided through the adapter, but either way won't work.
    Trying "Set API.IntBlockMgr.IntegrationMgr.PobjIntegrate = BlOCKPROC.ActConnect("LookUP")" throws an object required error.
    Trying
    Dim BLOCKPROC
    Set BLOCKPROC = CreateObject("upsWBlockProcessorDM.clsBlockProcessor")
    BLOCKPROC.Initialize API, SCRIPTENG
    throws me a type mismatch for "BLOCKPROC.Initialize".
    I am kinda at my wits end. Any help/clue is much appreciated.
    Ahh, yes the different writing BlOCKPROC and BLOCKPROC is correct!
    Thanks!

    Hello Tony,
    Many thanks for your answer. Just one last question. The event AftProcMap(strLoc, strDim) gives me the Dimension? Just how do I get the account?
    Can you point me to the right direction and I'll figure out the rest!
    Thanks a lot!

  • Multithreaded access to TopLink API

    Hi,
    If several threads need to access the TopLink API for a given Project, what can be shared and what can't be shared or must be synchronized? Should a different DatabaseSession be used for each thread?

    I agree with the previous answer. Using server sessions will provide the benefit of a shared cache for all clients.
    On the other hand, if I am ready to give up this benefit, can I use DatabeSession in a multi-threaded environment?There are other things that speak against this approach
    I will definitely need to:
    - ensure each thread uses its own database sessionWith a shared cache, you get repeatable reads at the object level. Since the shared cache maintains Object identity for ALL Threads, you don't have to worry about read-only Objects going stale as Transactions from other Threads are committed. Using Multiple DatabaseSessions, you'd have to consider some sort of OptimisticLocking for all Objects since many Threads could have "copies" of the same data in the database.
    - synchronize accesses to the Project, for example when creating a new DatabaseSession for the client.
    Is that engouh? Are there "hidden" shared resources between DatabaseSession instances that would compromize the approach?There are probably other "hidden" problems. One I can think of off hand is that TopLink also manages sequencing at the Session level. So more than one DatabaseSession would mean that each Session would not be able to cache sequence numbers (which would slow down inserts considerably).
    Regards,
    Thierry.

  • Problem accessing /config_general/null/Default.action   Reason:There is no Action mapped for namespace/ config_general and action name default

    in use:
    vRO 5.1
    eclipse 3.7.2
    vRo plug-sdk 5.1
    steps:
    1.create a plug-in project from samples(choose solar system)
    2.find the dar package and upload it by vRo configuration
    3.vRo configuration said upload successfully,but the solar system configuration is not properly configued..
    problem:
    Problem accessing /config_general/null/Default.action   Reason:There is no Action mapped for namespace/ config_general and action name default
    How to solve it??
    Thanks so much!!

    There was problem from crm side...its working now..

  • Having problems accessing any apps on my iCloud. Set up and signed in successfully but then when I click on an app it just says there's a problem but doesn't say how to fix it. Please help, am very new to this!

    Hi
    I am very new to updating my iPod touch and this is the first time I've used the iCloud. However, I am having problems accessing any apps on my iCloud such as photos, reminders etc. I've set it up on my iPod touch successfully and I can sign in on my PC. However, when I try to access any of the apps it says there was a problem. It doesn't tell me how to fix it or what the problem is.
    Is anyone able to help?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • Problems accessing Music Files in Slideshow module in LR 2.6 and Windows 7 64 bit

         Just got new computer 64 bit Windows 7.  Installed LR 2.6 and am having problem with slideshow and music.  Never had this problem before with my XP computer.  When I open up slideshow module and go to Playback window and check soundtrack and try to choose a music folder, I have a new problem.  It opens up "Browse for Files & Folders" dialog box as usual, but it only lets me browse on my desktop or my User name on the C drive.  My music is in my F drive where my data is stored.  I've never had a problem accessing my music in my F drive in my XP computer, but this setup limits where I can browse to.  Interesetingly, this works OK in LR 3 beta on this WIndows 7 PC where it opens up a dialog box "Choose a music file to play" which gives me access to all my drives.  In summary, I can't access music files stored on a drive other than my C drive using LR 2.6 on a Windows 7 64 bit computer.
         I have attached a screen shot to compare the new Windows 7 Browse for Files & Folders dialog box to that in my XP computer.
         Would appreciate any suggestions.
    Thanks,
    Matthew Kraus

    Thanks for the reply.  I went through the process you suggested to change Ownership  & grant permission to access files.  When I get to the owner tab in Advanced Security Settings....I am already the current owner of this folder.
    What do I do now?
    Thanks,
    Matthew Kraus

  • Problems accessing Time Capsule on windows Vista

    I have an iMac running Leopard and a laptop running Vista Home Edition. I'm having some problems accessing Time Capsule from the Vista machine. everytime I click to access the drive, a message appears in the menu bar of the window that says (not responding). I've tried leaving it. I've even changed my entire wireless network to bypass the original g router (belkin) to use TC, so I now have TC as my router, Belkin just setup as a wired broadband modem but I still get the same problem. The mac seems fine, although I have had quite a few issues with drop outs.
    both machines have the latest version of Airport Utility and Bonjour.
    The laptop is a recent purchase to replace a dead XP machine, this worked fine and I managed to get stuff backed up just before it died, thankgod.
    Any help appreciated.

    No problem seeing Time Capsule with iMac, Dell desktop XP Home, Dell notebook XP Pro, and Fusion with XP Pro. All installed according to the installation guide. Installed AirPort Utility on all machines and updated firmware to 7.3.1. To see the other machines, make sure file sharing is on. Firewall on the PCs may need to be turned off. The printer plugged into the USB port also worked with all the XP systems and the iMac with a few missing features on iMac (I am assuming different driver issues). BTW, logging onto the created network and accessing the Time Capsule HD are separate. If you've entered different passwords for the HD and wireless networking when setting up Time Capsule initially (which I did through the iMac first), you'll need to enter them separately with the XP machines. You could also try resetting Time Capsule. Seems to work for others.

  • Problem accessing adobe camera raw in Bridge for CS6

    I have a problem accessing adobe camera raw in Bridge (CS6) directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable in Bridge or Accessing Photoshop directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable this feature."  My software is registered with Adobe. Any solutions?feature."  My software is registered with Adobe. Any solutions?

    Creative Suite Cleaner Tool laufen lassen, neu installieren. Und was auch immer für ein dämliches Update den Schaden verursacht haben mag einfach nicht aufspielen, wenn nicht unbedingt nötig...
    Mylenium

  • Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"?

    Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"

    Close iTunes, delete iTunes Library Extras.itdb from your iTunes folder, start iTunes. iTunes should rebuild the file automatically.
    tt2

  • Exchange setup error: "There was a problem accessing the registry on this computer"

     Hi,
    i am trying to install Exchange 2007 SP1 in a Windows 2003 Server standard 32 bits version.
    During the "Readiness checks" i received the next error in "Hub transport role prerequisites":
    Error:
    There was a problem accessing the registry on this computer. This may happen if the Remote Registry service is not running; it may also indicate a network problem.
    Remote Registry service is running. I've searched for the error in google and in some topics appears that the error is due to the "Client for Microsoft Networks" and "File and Printer Sharing" is not installed in the LAN properties. The server has 2 network cards and in both of them is checked. One of the connections is disabled.
    I dont know what more to do, any help will be appreciated.
    Thanks

    No, firewall is disabled.
    Setup Logs says:
    10:50:04.890: Starting Collecting Data phase.
    10:50:04.921: No mapping between account names and security IDs was done
    10:50:04.984: Error (Unexpected error [0x674CBB7E] while executing command '[Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName)'.) trying to process object [Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName), skipping object.
    10:50:06.093: Completed Collecting Data phase.
    10:50:06.125: Error (Rule name 'PreReq_fPassiveUninstallNoCMSPresentKey' referenced by rule 'PreReq_fPassiveUninstallNoCMSPresent' in input file is not defined) in format of rules in configuration file.
    10:50:06.171: Starting Postprocessing Rules phase.
    10:50:06.187: Completed Postprocessing Rules phase.
    Thanks for your help!

  • Problem accessing R/3 with SSO ticket from the EP6.0

    Hi all,
    I have seen this thread: Problem accessing R/3 with SSO ticket from the EP6.0
    I know that it is possible to read SSO ticket from the Cookie in WebDynpro application.
    Now we are at the first step, we don't know how to read SSO ticket from the Cookie in WebDynpro application with java code.
    So anyone can help us?

    Hi,
    This has been discussed in a previous forum.Check this link.A code snippet is also there to read a cookie in webdynpro with this question
    How to implement SSO between Portal, Webdypro and ABAP system?
    I am not able to send the link exactly.
    Regards,
    Sowjanya.
    Message was edited by: Sowjanya Chintala

  • Problem accessing another public ip in same subnet

    Hi,
    I have searched around for a previous post regarding this but can't find an issue similar to mine (or I'm just too stupid to understand that it is )
    I have a Cisco 5505 at a small business that I help. The problem is that the ISP are providing public IPs to multiple customers in a /24 subnet. The ASA has a single public IP configured 8.8.8.8 (not really, just for the examples sake) with a subnet mask of 255.255.255.0.
    The webserver I have to access is not managed by me and is located in a different location (same town though) has 8.8.8.115, it is located in the same subnet as the ASA.
    How would I make this work? I have tried to configure a static arp entry for the web server but it just won't work. If i place a computer directly on the outside interface I have no problem accessing the web server.
    I am running ASA version 8.2, but I could upgrade if it would help me solve the problem.
    Any help with this issue is much appreciated.

    The ISP only specify one gateway in that range and that is 8.8.8.1 so any other would not let me access internet.
    Once again thank you for your time.
    : Saved
    ASA Version 8.2(1)
    hostname ciscoasa
    domain-name XXXXXXX
    enable password XXXXXXX encrypted
    passwd XXXXXXX encrypted
    names
    name 8.8.8.8 Outside_IP
    name 192.168.20.2 Server
    name 192.168.20.11 rav-dc01
    name 192.168.20.12 rav-ms01
    name 192.168.20.13 rav-rds01
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.20.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address Outside_IP 255.255.255.0
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    boot system disk0:/asa821-k8.bin
    ftp mode passive
    dns server-group DefaultDNS
    domain-name XXXXXXX
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    object-group protocol TCPUDP
    protocol-object udp
    protocol-object tcp
    access-list inside_nat0_outbound extended permit ip any 192.168.25.0 255.255.255.0
    access-list RemoteVPNSplittunnel standard permit 192.168.20.0 255.255.255.0
    access-list outside_access_in extended permit tcp host 100.100.100.228 interface outside eq 3389
    access-list outside_access_in extended permit tcp any interface outside eq smtp
    access-list outside_access_in extended permit udp any interface outside eq 4125
    access-list outside_access_in extended permit tcp any interface outside eq 4125
    access-list outside_access_in extended permit tcp any interface outside eq https
    access-list outside_access_in extended permit tcp any interface outside eq pptp
    access-list outside_access_in extended permit tcp any interface outside eq 444
    access-list outside_access_in extended permit gre any interface outside
    access-list outside_access_in extended permit udp any interface outside eq 444
    access-list outside_access_in extended permit tcp any interface outside eq www
    access-list inside_access_in extended permit tcp host rav-ms01 any eq smtp
    access-list inside_access_in extended deny tcp any any eq smtp
    access-list inside_access_in extended permit ip any any
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    ip local pool RemoteVPNPool 192.168.25.100-192.168.25.200 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-621.bin
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    static (inside,outside) udp interface 4125 Server 4125 netmask 255.255.255.255
    static (inside,outside) tcp interface 4125 Server 4125 netmask 255.255.255.255
    static (inside,outside) tcp interface https rav-ms01 https netmask 255.255.255.255  dns
    static (inside,outside) tcp interface pptp Server pptp netmask 255.255.255.255
    static (inside,outside) tcp interface 3389 rav-rds01 3389 netmask 255.255.255.255  dns
    static (inside,outside) tcp interface smtp rav-ms01 smtp netmask 255.255.255.255
    static (inside,outside) udp interface 444 Server 444 netmask 255.255.255.255
    static (inside,outside) tcp interface 444 Server 444 netmask 255.255.255.255
    static (inside,outside) tcp interface www Server www netmask 255.255.255.255  dns
    access-group inside_access_in in interface inside
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 8.8.8.1 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa-server rav_Intern protocol radius
    aaa-server rav_Intern (inside) host rav-dc01
    key CiscoAsa5505RAV2012
    radius-common-pw CiscoAsa5505RAV2012
    http server enable 8080
    http 192.168.20.0 255.255.255.0 inside
    http 192.168.25.0 255.255.255.0 inside
    http 100.100.101.128 255.255.255.192 outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    sysopt connection timewait
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map outside_dyn_map 20 set pfs
    crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
    crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    telnet 192.168.20.0 255.255.255.0 inside
    telnet timeout 5
    ssh 192.168.20.0 255.255.255.0 inside
    ssh timeout 5
    console timeout 0
    management-access inside
    dhcpd auto_config outside
    dhcpd address 192.168.20.190-192.168.20.200 inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    ntp server rav-dc01 source inside
    webvpn
    group-policy RemoteVPN internal
    group-policy RemoteVPN attributes
    wins-server value 192.168.20.11
    dns-server value 192.168.20.11
    vpn-tunnel-protocol IPSec
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value RemoteVPNSplittunnel
    default-domain value rav.nu
    split-dns value rav.nu
    username SupportVPN password XXXXXXX encrypted privilege 0
    username SupportVPN attributes
    vpn-group-policy RemoteVPN
    tunnel-group RemoteVPN type remote-access
    tunnel-group RemoteVPN general-attributes
    address-pool RemoteVPNPool
    authentication-server-group rav_Intern
    accounting-server-group rav_Intern
    default-group-policy RemoteVPN
    tunnel-group RemoteVPN ipsec-attributes
    pre-shared-key *
    class-map inspection_default
    match default-inspection-traffic
    policy-map global_policy
    class inspection_default
      inspect pptp
      inspect icmp
      inspect icmp error
    service-policy global_policy global
    prompt hostname context
    Cryptochecksum:8481ab3aa01b23bad17bacb2aca7197a
    : end
    asdm image disk0:/asdm-621.bin
    no asdm history enable

  • Step by Step to access custom Java API in Application Service.

    Hi Experts,
           I have a situation to access the custom Java API in CAF. The Java API fetches the data from MDM. I need to get the data from that API and and use it in the CAF Application Service layer? Is there a way to access the JAVA API in the Application Service Layer? If so please do help me out. Step by Step solution would be appreciated.
    thanks in advance.
    Regards
    Ketan

    Hi Ketan,
    You can do it in two ways.
    1. You can create your own custom class in the ejbmodule which you can see in the Navigator view.
    2. You can have a ear having the custom class. This ear will be in a separate DC and CAF will have dependency to it.
    Regards,
    Srinivasan Subbiah

  • [ETL]Could you please help with a problem accessing UML stereotype attributes ?

    Hi all,
    Could you please help with a problem accessing UML stereotype attributes and their values ?
    Here is the description :
    -I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
    -Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
    -Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
    s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
    -However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
    Please help
    Thank you

    Hi Dimitris,
    Thank you , a minimal example is provided now.
    Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
    Instructions for reproducing the problem :
    1-Run the uml2etl.etl transformation with the supplied launch configuration.
    2-Open lqn.model.
    There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
    The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
    Thank you
    Mana

Maybe you are looking for

  • CMD+ any shortcut doesn't work in Safari after upgrading to Yosemite

    After upgrading from Mavericks to OS X Yosemite 10.10 not a single CMD+ shortcut works?! For example CMD+tab works (switching between apps), ctrl+tab works (switching between tabs), but none of these work: CMD+W, CMD+Q, CMD+F, CMD+C, CMD+X, CMD+P...

  • My 4th gen Ipod Touch won't turn on/charge?

    I have the 4th Gen Ipod touch. I was using it after it had been saying 20% battery remaining for awhile. I locked the screen, then I tryed to press the power button again to unlock it but it wouldn't work. I automatically assumed it had died complete

  • What processors work with the Mac mini?

    Hello everyone! I've got the previous gen mini, and unless it is too expensive, I'd like to get a 7200 rpm HDD and a new processor. I can't seem to find what socket the mini uses or what processors will work. Any insight is appreciated! On a complete

  • How do I permanently and completely get rid of instructions in a language I don't speak?

    I installed Acrobat XI from a disc I bought from BestBuy, on Windows 7. I eventually used custom install to disable Slovenia language which for some reason kept appearing in the installation instructions. I wanted English only. I kept uninstalling an

  • Is it a bug in JUCtrlListBinding.java

    Hi, I came across the following method in JUCtrlListBinding.java.    protected Object findAndUpdateSelectedIndex(Object val, boolean flag)       int selIndex = findListIndex(val);       Object matchVal = null;       if (selIndex >= 0)          //this