Problem after replace HDD on Mac Mini and iCal
Hello, I have clone the Mac Mini HDD with disk utility, and boot up the server, and now the iCal Server is not working, it's shows as started, but the calendar on iCal client is empty. What can I do?
regards Christopher.
Ok, solution was: Upgrade to Lion, that was the plan anyway.
Similar Messages
-
Nevermind I answered my own question.
Very interesting, thanks el Duque. Too bad MCE doesn't make a carrier for the Mac Mini. I wonder if one for a Macbook Pro can be easily modified to fit?
I have just learned that the SATA connector on the logic board for the optical drive in Macbooks and the Mini is called a "Slim-SATA" connector. Instead of the power side of the connector having 15 pins, it only has 6, with both types of connectors having a standard 7-pin data side. Both power and data hook-ups are achieved in a single connector -- a power side and data side.
Since the ports on 2.5" hard drives are "standard" SATA connectors, AND they don't match up to the logic board's connector location (like with the connector location on the optical drive), a cable is needed to run between the HDD and the logic board connector.
Unfortunately, such a cable is not available -- yet. Instead, one has to be fabricated out of two types of SATA cables -- a Molex 4-pin to SATA 15-pin power cable and a combination cable that looks like this:
http://www.byteccusa.com/product/SATA/SATA-XP118/SATA-XP118.htm
The fabrication involves replacing the molex 4-pin power end of the combi-cable with the SATA power end of the molex 4-pin to SATA power cable (cutting and soldering). The BIG question now is whether a HDD will work with just the two-wire power cable (of the combi-Sata cable) that an optical drive normally uses? Anyone know if it will? Thanks. -
I'm getting rid of an old Mac Mini which has it's iTunes library stored on a NAS drive. I want the replacement Mac to reference and use this existing NAS stored iTunes library rather than loading the entire contents onto the new Mac. What do I need to do?
Open iTunes with the option key pressed. You should see a window asking you to choose a library, create a library and cancel. Select choose a library and navigate to the NAS drive.
-
The Battle between Mac Mini and windows machines
Ok i have a strange problem. I have a Mac Mini and it likes to fight with windows machines on the same network resulting in a loss in internet connectivity. Ok so here is the info the mini and the windows are on the same network the windows is wireless the mini is wired when both computers are on the internet for the whole network slows down. So i brought it to a friends house and hat it share his wireless connection same problem different windows machine except the internet connection stopped completely. With an all macintosh network nothing bad happens to the network.
Solutions anyone?If your Mac Mini is wired you can easily turn 'Airport' (the built in wireless) off. By clicking on the icon next to the speaker icon in the top right haand corner and clicking Airport off.
-
Replace mid 2010 mac mini hard drive(s) and thermal sensor(s)
TL;DR: How do I swap SSd for HDD in Mid 2010 Mac Mini without Fan problems.
I'd like to replace both my Mac Mini HDD's with SSD's, but removing/repositioning* the factory thermal sensors will default the fan to full throttle! (I've had this happen on my other mid 2010 test machine). Has anyone successfully swapped out their drives and not had to deal with a system fan on Afterburner mode?
Note: on my test mac mini, I tried SMC fan control as well as SSD Fan Control apps and neither is able to change the fan RPM.
SMC Fan control (this is what I use on my macbook)
https://www.macupdate.com/app/mac/23049/smcfancontrol
SSD Fan Control: (suggested by others with similar thermal sensor/fan problems)
http://exirion.net/ssdfanctrl
* the position of the thermal sensors on the factory hitachi's is apparently important. In a test, I moved one a few millimeters and the fans defaulted to full speed.
Cheers!
KenI replace the HD on my 2009 Mini with no fan problems.
From your description I think yo have either a sensor or logic board problem. If the sensor was not attached to the HD and was "cold" then the fan speed would not increase if the HD got hot.
When you played around with sensor position what what the temperature of the sensor when you go the "right" fan speed and the runaway speed. -
When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?
I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows. -
I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto ties to load them first, then Lightroom can't find the files. Big problem. What to do?
Simple:
File -> Export to get your photos out of the iPhoto Library. In the Export dialogue you can set the kind to Original and you'll get back exactly what you put in.
Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
Once exported, you can then trash the iPhoto Library - just drag it from the Pictures Folder to the trash and empty it.
After that, if you're entirely neurotic about it, just put the iPhoto app in the trash and empty it.
Regards
TD -
Airport Express problems with new MAC MINI and DLINK router SOLVED
Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help youHello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked) -
I'm a new user - recent convert from longtime Windows to Apple. Thought having desktops and computing aligned with phones and tablets would help. Not so far.
I have a MacMini running Mavericks 10.9.1, and an iMac running Mavericks 10.9.1. File Sharing is set up on both. If either device is rebooted for any reason, file sharing from the Mac Mini to the iMac "breaks" and will not easily restart. Various things eventually brings the connection back - usually having to do with checking and unchecking File Sharing, the AFP button, and/or the SMB button on the iMac - but never the same procedure twice in a row. File Sharing from the iMac to the Mac Mini is never disrupted - always comes back up without a problem. Screen Sharing also works between both without fail, and comes up after reboot of either. No problem there. Only difficulty is from Mac Mini to the iMac.
Why? Any ideas?Should also clarify - usually takes multiple hours of checking/unchecking file sharing settings in order to restore the share between Mac Mini and iMac. NEVER happens automatically.
This is disruptive because I've got the Mac Mini pointing to several file locations on the iMac for various things - photos, music, etc. - and they all hang up unless the share is restored. Real bummer. -
After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
Problem with Mac mini and HP w2207h
I have a new Mac mini and a HP w2207h screen. I have a problem with the resolution. The screen wants to be on 1680x1050, but when i turn that mode on, the screen is just blinking and you can't see anything. so i have to use the 1080p modus. But it's kind of blury. Can anyone help? Does apple has some kind of support mail??
Don't waste your time or money on the adaptors. I have a hp 2207h and I tried th dvi to hdmi and the dvi to vga, neither work, I still don't have a working monitor. Waited on the phone for tech support for 30 minutes. Then got a total line of crap.
This monitor works flawlessly with my comcast motorola hd cable box, with my sony dvd player, with my toshiba laptop, with my hp computer. But will not work with a mac mini... The only logical reason given the wide varity of equipment it will work on, is that apple does not support HDMI standards, if they did, it would work.
The apple does work on my 40 in tv. But thats not where I want it. So, this is useless to me. And after the line of crap I got from tech support, I'm thinking about quiting apple all together.
This ***, I was really excited about my first apple computer. Now after 4 hours, and nothing but frustration and no support at all from apple, I'm thinking about giving up and sticking with PC's from here on out. Worst experiance ever.
I may even switch to android and chuck my 4... -
Can I install SSD and HDD on mac mini server?
hi. I want to buy a new mac mini server with two hdd. can I replace one hdd on my ssd and leave second hdd for files? And can I install OSX on my ssd and windows on my second hdd (divide it into 2 parts... for bootcamp and file storage)? thanks
AGStudio.pro
as I know, it is impossibe to install ssd and hdd in this model
Thats incorrect, who told you that? Ive installed a second 7mm drive in several Mac Minis and own 2 myself. Typing on same now.
(you can put in a second 9.5mm drive rather than a 7mm drive, however it takes nimble fingers unless you want to completely remove the dual drive caddy from inside the mac Mini)
see youtube video on installing second drive in the Mini
http://www.youtube.com/watch?v=mnrhin2ed8E
AGStudio.pro
I don't need a server.
Then you dont need the mac mini server. All you need is a standard mac mini.
The mac mini server is EXACTLY THE SAME as the standard Mac mini quad core mini,....except with a second drive and Server software.
All current Mac Mini have a dual slot for a SECOND DRIVE -
Can anyone tell me how to tranfer the music that is on my Shuffle to iTunes? When I go to Sync it, it gives me a warning that all the music on my Shuffle will be deleted and replaced with what is on my iTunes. I recently changed computers from an HP to a Mac-Mini and did not transfer/sync the itunes prior to getting rid of my itunes. So the music I had on itunes does not appear in my library. Help please!
See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your new Mac and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Then proceed to do the Erase and Sync or restore the device.
B-rock -
I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
If you have two displays attached, then the function to change from mirrored to extended Desktop will appear in System Prefs/Displays. -
Problem with Mac Mini and Panasonic PT-AE700 projector
I just bought a brand new Mac Mini and intended to connect it through hdmi to my Panasonic PT-AE700 projector (with a 10 m hdmi-hdmi cable and a dvi-hdmi adapter). However there is no signal recognized by the projector.
Any suggestions? I have tried with two different dvi-hdmi adapters between the Mini and the cable. Both work fine with my MacBook Pro, but with the Mini there is no signal.
Mac Mini Mac OS X (10.4.7)Thanks again BSteely for your answer.
Unfortunately I still haven't been able to get anything out from the projector through HDMI.
However, I've found someone with a similar problem. It seems the problem is the lenght of the HDMI cable (which in fact is closer to 15 m than 10 m). HDMI is designed to handle at least those 10-15 m runs, but the problem seems to be DVI, which is only capable of something around 5 m. Since I'm converting from DVI to HDMI, I'm subject to DVI's limitations. And the MBP seems to have better capability of handling the weaked signal than the Mini.
Read more: http://www.avsforum.com/avs-vb/showthread.php?t=712218
Gefen should have an amplifier (HDMI Super Booster) that could solve the problem. I just ordered it to see if it could help in strenghtening the signal and solve the problem for me.
Read more: http://www.gefen.com/kvm/product.jsp?prod_id=2939
If someone has any experience from the booster, please let me know.
Maybe you are looking for
-
I downloaded an iTunes update and when ashen I restarted my pc it locked up. It says client Mac address 001320bead25, PXE E53 No boot file name received. PXE MOF. Exiting Broadcom pie rom. How do I get my pc back!
-
Hi all, What is Web Services and explain RFC to SOAP scenario step by step. Thanks
-
Strange Behaviour after 6.0.2 install
Hello all, This is my first posting to Apple Discussions, so please be kind... I recently installed iTunes 6.0.2 via Software Update and noticed strange behaviour while trying to edit a smart playlist. I have a smart playlist set up to select songs b
-
Hello Friends, I wrote the database trigger which executes when the db is up but it's not happen and i'm not able to find out the exact problem that the trigger is not exceutin or the problem in the job which is written inside the trigger. CREATE OR
-
Is there a SLEEP command in oracle
I tried using sleep(5); in one of my PLSQL. The database does not recognize the command Any body with experience on this