Problem after update to 10.9.3 rMBP - no login panel

Hi,
After update to 10.9.3 I don't run the rMBP. After press power button I pressed Cmd+S, then mount -uw / and cat /var/log/system.log.
fsck ok
What to do? I can't work. I must run MBP without reinstall OSX.

OS X Mail: Troubleshooting sending and receiving email messages

Similar Messages

  • White screen problem after updating to 1.1 firmware

    My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
    Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

    Disconnect iPod and close iTunes.
    Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
    You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
    Remove 1.1 files from the folder so that only those to files are in there.
    Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
    Fujitsu Siemens Amilo M3438G   Windows XP  

  • Photoshop CS2 problems after updating to 10.4.5.?

    Anybody notice Photoshop CS problems after updating to 10.4.5.?

    Hello I had the same problem
    I found the following information that helped me.....
    Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
    Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
    Issue
    Adobe Photoshop CS2 returns one of the following error messages:
    "Could not complete your request because of a program error" when you try to open a file.
    "Could not create a new document because of a program error" when you try to create a new file.
    Solution 1:
    Install the most recent update to Mac OS.
    Solution 2:
    Re-create your preferences files.
    1. Hold CommandOptionShift when you start Photoshop.
    2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Solution 3:
    Disconnect your Internet connection.
    To disconnect your Internet connection, do one of the following:
    If you are connected to the Internet via a telephone modem, then disconnect from the modem.
    If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
    Solution 4:
    Use a disk repair utility.
    Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
    Solution 5:
    Ensure that all your drivers are compatible with Mac OS X v10.4.
    Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
    Solution 6:
    Re-create your printers in Mac OS X.
    To re-create your printers, first delete them and then add them again.
    To delete your printers:
    1. Open System Preferences from the Apple menu.
    2. Select Print & Fax, and click Printing.
    3. Select each printer in the list and click the delete key (the minus key).
    For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
    The one that fixed it for me was solution 6 -- re-creating my printers
    I don't know why but it could be worth a try
    Good luck
    ADAM
    17" Powerbook G3 iMac   Mac OS X (10.4.3)  
    17" Powerbook G3 iMac   Mac OS X (10.4.3)  
    17" Powerbook + G3 iMac   Mac OS X (10.4.5)  

  • My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

  • Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

    My device is Iphone 5 64gb IOS 8.
    I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
    1. How can i fix it?
    2. Or how to rollback to IOS 7+ ?
    3. Should i come to app store with this problem?

    I'm having this same problem too.  Worked fine prior to iOS update.  I contacted Verizon this morning who advised that this is a known issue.  They suggested I backup my device, and perform a factory data reset.  When prompted to update to iOS 8 again, re-installation has been known to resolve the issue.  With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

  • What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

  • HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I am facing the same issue! I bought 5c few days back
    and everything was fine till I updated the software 7.0.4!
    Whenever am connected to wifi am unable to make a call and if someone tries
    Calling me they get the message that my number is not
    Reachable! When I go back to 3G the calls work perfectly!!
    Please help me out since I use wifi more than my network.
    Appreciate any advise on this

  • Flash player problem after updating to belle on my...

    flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz  help or tell me the way to downgrade to anna
    Attachments:
    scr000002.jpg ‏10 KB

    1) product code  059B7W0
    2) software version 111.030.0609
    3) it is actually stored .flv files on my phone  workes fine on symbian anna
    Attachments:
    Scr000003.jpg ‏17 KB
    Scr000004.jpg ‏15 KB

  • Anyone has any problem after updating to iSO 4.3.1 ?

    anyone has any problem after updating to iSO 4.3.1 ?
    I would like to know before updating mine.

    My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
    So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
    It you haven't already guessed, I'm more than a little ****** off.
    If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
    If its not right by the weekend I'm taking it back to the shop I bought it.

  • Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Has your problem been solved by the updates??
    Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
    MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
    Microsoft Office 2011:  version 14.2.3
    Mountain Lion: 10.8.2 (12C60)

  • Cpufrequtils problem after update

    Hello!
    I've a problem after update my system with pacman -Syu.
    When system loads cpufreq i've this problem:
    cpufreq-set: error while loading shared libraries: libsysfs.so.1: cannot open shared object file: No such file or directory
    I try uninstall the cpufrequtils package and reinstall it but doesn't works
    How can i fix it?
    thanks.

    raskolnikov wrote:
    No need of cpufrequtils :
    $ cat /etc/rc.local
    #!/bin/sh
    echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    That's ok. And of course powernow-k7 in MODULES array of rc.conf
    Sure, that's pretty much what cpufrequtils do, however, they a) don't spawn a shell process and b) allow you to configure sudo to handle user-based changes.  It's just a nice wrapper for that.
    raskolnikov wrote:BTW the last update of this (cpufrequtils) package has overwriten my /etc/conf.d/cpufreq file, is this a normal comportement ? This file was not in NoUpgrade as if I remeber correctly, NoUpgrade was deprecated with last pacman package...
    Errm, blame me - that file should be backed up.  Thankfully, it's not a giant config file.

  • My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    Hey there Abdulrahim0259,
    I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    And:
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • HT6147 Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem?

    Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'

    Restore from iCloud Backup
    1. Settings>General>Reset>Erase all content and settings
    2. Tap Erase
    3. You'll see Apple logo and progress bar
    4. Hello
    5. Slide to set up
    6. Set language
    7. Set country
    8. Choose Wi-Fi network; enter Wi-Fi password
    9. (a) Use Location Service (b) Don't Use Location Service
    10. Select option
    11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    12. Selected Restore from iCloud Backup
    13. Enter password for iCloud
    14. Agree to Terms and Conditions
    15. Setup Apple ID
    16. Select backup
    17. Restoring from iCloud
    18. Hello
    19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
    20. Continue
    21. Finish setting iCloud enter Password
    22. Updating iCloud settings
    23. Create a Passcode
    24. Welcome to iPad
    25. Get Started
    26. Restoring Apps and Media
    27. Enter Apple ID and Password
    28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
    29. Connect iPad to iTune to sync with computer
    30. Sync Music, Videos and Album Artwork

  • I have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

    i have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

    Hi all
    Like to share that my AV Adapter problem is solved ... brought it to Apple Service Center as a last resort after the new iOS v5.1 did not solve mine like some others have theirs solved.
    In fact, the Apple Service Center tried my AV Adapter and find that it does not work with their iphone and ipad too and flagged for a replacement.
    Just this week collected the replacement and tested that the replaced adapter works !
    So this "unsupported device" error msg could also be due to faulty adapter .... although it is unbelievable that a "simple" wired connector could so easily breakdown after 1 time use !   I never did believe that it can be broken so easily as we hardly used it after the first testing with our TV on HDMI.
    Closing this chapter of mine finally.

  • Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

Maybe you are looking for