Problem at reboot with 10.4.6
On restart following 10.4.6 install Imac (dual core) would not fully boot up. Spinning beach ball for almost 15 min. I called Apple support and...They got me safe boot...from there I dragged startup items folder to deskstop and restarted. Everything worked fine so they got me to trash the folder. Question is, isn 't this folder needed???
EvEr34, ther could be other "Startup Items" folders that the Mac OS X uses. I think there is one in Mac OS X disk/System/Library/ and one in Mac OS X disk/Library/ so the one that you trashed might have been corrupt or duplicated.
Similar Messages
-
My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists
Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.
-
Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?
Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart. -
Help needed to track down Problem in tiger with Pioneer DVR-110D
ok as i stated in another topic i own a Beige G3 AIO that is running OS 9.2.2 and OS X 10.4.8 and i have done allot to this system to get it to run faster and to run properly.
part of this setup has a Pioneer DVR-110D it there and when i bought it i was running OS 9.2.2 only. at first i could not burn anything with it cause it wasn't supported and when i went to put the system to sleep it would freeze when i would wake it up it never did this before i installed the drive so i knew what was causing it.
i turned off HDD sleep and the problem was fixed. but i didn't like the ideal of having the hdd running all the time when idle. me and a friend was talking about optical drive issues and he said he found this driver replacement for the apple cd/dvd driver called intech speed tool's 6.0 for OS 9.2.2 and that i should give it a try cause it fixed a few problems for him.
i downloaded the demo of it and installed it and i turned on hdd sleep and put the system to sleep and woke it back up and the system was running great. so now the wake up freeze problem was cured. but still no burn support. so after a few weeks of posting on here about the problem some one came by and said he knew what the problem was and sent me a modded PioneerCDR authoring support extension. i installed it and rebooted and opened iTunes and iTunes showed Pioneer DVR-110D as the devise to burn to. so i tryed it and behold it burned a audio cd with no problems.
later i bought a western digital SE 120gb hdd and installed it and partitioned it 3 times a 8gb first partition for OS X a second partition 10gb for OS 9.2.2 and the 3rd partition was the rest of the drives size for shared data and storage. the hdd worked great with no issues so it was time to try OS X on this system cause i was waiting to get a large HDD to do so.
i figured that the Pioneer drive would not boot the OS X jaguar cd and is a known problem with non apple cd rom drives. so i took out the Pioneer and reinstalled the apple 24x stock cd rom drive. and the jag install cd booted without a hitch. Jag installed and was running so i updated to 10.2.8 and found out the internal screen kept going out and locking the system up. so i searched this forum for the onboard video blackout and came across the terminal work around to get the system to behave itself with having more than 192mb ram installed. i rebooted and all went fine afterward.
i reinstalled the Pioneer drive and went to testing it all was fine everything mounted on the desktop that i put in the drive. but i lacked the ability to burn with the drive cause still the drive wasn't supported be the system so i searched the forum and came across the program called patchburn. i downloaded it and ran it and patched the driver to support iApps burning with this drive. so i put in a blank cd and went to burn in iTunes it burned flawlessly so i tryed a dvd-r with the finder it to burned flawlessly.
o loved playing a game planeshift and then they stopped supporting 10.2.8 so i went to buy the tiger install cd's. i already knew the Beige G3 was not a supported version of Os X on this system and you had to use xpostfacto 4 to install tiger on this system. so i did what i had to do to install tiger on the system and selected use old NDRV and selected to install tiger. which installed some files to boot tiger and rebooted yet again the Pionner drive refused to boot the install cd's . i got mad and held down the command option power key's for about 10 seconds and let off. the tiger installer booted and got to where it started to copy the files to the hdd and stalled out and the drive spun down never to spin back up or show signs of life so i powered down the system and removed the pioneer drive and put the stock 24x cdrom in and installed tiger.
after tiger was installed i shut down the system and installed the pioneer drive. and powered back on and it was in verbose mode showing what was going on one part showed that the Pioneer drive was detected but had no kernel dependencies and continued to boot. i went to repair the permitions when the onboard video went blank and the system locked up. i rembered that 10.2.8 did the same thing so i tried the 10.2.8 screen blackout fix in 10.4 and rebooted. the onboard video didnt come on but since i had a ATI Radeon 7000 i could work around in tiger to update to 10.4.7 at the time. i first repaired permitions and then ran software update and updated everything and rebooted. the onboard video came back on allong with the ATI Radeon 7000 which being used as boot video device and shown the gray apple logo with the spinning pin wheel at the bottom.
so far tiger was running great so i put a disk in the drive and nothing it didn't mount anything so i ejected it with the button on front of the drive and tryed a dvd movie and got the same nothing as with the cd. so i rebooted with the dvd in the drive al behold tiger mounted the dvd but as soon as i would try to do anything with it the drive would stop and i would have to reboot the system to gain the drive back so i can repair permissions. and never tryed to use the drive again
10.4.8 update came out i updated to it using software update and rebooted. the update went flawless so i thought to myself what if the pioneer drive worked now. so i put a cd in the drive and it mounted the disk. then i ejected it with amazement and put a dvd in and it to mounted. so i tryed to play the dvd and it played the dvd to the end of the movie. i took out the dvd and rebooted. i tryed to put the dvd back in but it didnt mount. which ****** me off as to why it was just working and now its not.
i rebooted and the dvd mounted as soon as the desktop showed up so i tried to play it but this time it only played for about 10-13 minutes before the drive stopped spinning which made dvd player stop responding which made me have to force quit the dvd player and try to restart which gave me a kernel panic. so i forced restarted (got a forum to send to apple to report the KP so i did) and the dvd mounted once again as soon as the desktop showed so i ejected the dvd and put a audio cd in and it mounted and i played the hole cd. so i ejected that and put a blank cd in and treed to burn and it got to 30% and then the drive spun down and made the disk utility stop responding. so i forced quit disk utility and rebooted. once it rebooted nothing popped up so i pressed the eject button on the drive and the cd r came out.
the OS X 10.4.8 update made the drive more stable but still wont burn anything. some times it will still not mount anything, some time it will not play anything, and still fails to copy files over to the hdd. so now im left to believe its a driver issue some where since this drive worked so flawlessly in jaguar and OS 9 but fails to work properly in tiger.
i looked in the extensions in ASP in 10.4.8 and there is a few extensions showing errors. i made a list of them to show
PatchedAppleNVRAM:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/PatchedAppleNVRAM.kext
kext Version: 3.0
Load Address: 0x4db000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
OpenPMUNVRAMController:
Version: 2.0
Last Modified: 8/9/05 6:08 PM
Location: /System/Library/Extensions/OpenPMUNVRAMController.kext
kext Version: 2.0
Load Address: 0x63a000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
GossamerDeviceTreeUpdater:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/GossamerDeviceTreeUpdater.kext
kext Version: 3.0
Load Address: 0x63d000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenPMUNVRAMController: No valid version of this dependency can be found
Integrity: Unknown
that is the list of extensions that are reporting some sort of errors. at first i was figuring it was a problem with the driver for the Pioneer drive but my friend brought over his digital audio G4 which was also running 10.4.8. and we decided to try the drive in his Mac to see if there was any problems. it mounted everything we threw in it. it played dvd's great and played audio cd's great, it copied files over to the hdd without fail. it even burned a flawless cd. ok now the ideal of the driver for the drive was thrown out the window. so it has to be something else causing the problem. either a driver for a part on the motherboard or what i have no clue.
im just wondering what driver it would be causing a problem not allowing the Pioneer drive to work properly. cause its not the drive being bad cause it worked flawlessly in OS 9.2.2 and jaguar and in tiger in my friends digital audio G4
im just wondering if anyone might know what could be done to fix this problem cause i know it can be fixed but i don't know where to begin or how. so i ask you how could i begin to fix this
thank you all for baring with me and reading all this. i know i wrote allot but i had to explain what was going on before i could ask for help so you could better understand what was going on. i have already updated the firmware to the latest with no change the firmware use to be the old 1.11yea i have along time ago and also made a update to xlr8's drive database. cause i fixed the problems with the drive in OS 9.2.2 (AKA no burn support with the built in burning app or iTunes, now have full support for burning with the finder burn and iTunes thanks to a edited PioneerCDR authoring support extension that someone edited for me. found out that the Apple CD/DVD driver extension was at fault for the locking up on wake up with hdd sleep enabled that started when i installed the Pioneer drive. fixed with intech CD/DVD speedtools 6.0).
When i did the first report on the drive database on xlr8yourmac i reported what problems i was having in OS 9.2.2 and i think i reported that i had no problems in jaguar, and was trying to obtain a driver or something to try to get it to work. but to no avail at first. after i fixed the problems i did a update report
in jaguar the drive had no problems but no burn support. installed patchburn and the drive worked 100% in jag no problems what so ever. im thinking it has somthing to do with one or all of the extensions with errors but i can be wrong.
i just wonder where ryan has been on the forums in OWC's site. cause i would like to submit my crash log panic log and the extensions with errors so he could help track down the problems to see if it cant be fixed. but ive tried emailing him but no replay's. and his last reply on the OWC forums was back in desember 2005 a few day's over a year
i know it isnt the drive cause it worked flawlessly in tiger 10.4.8 on my friends Digital Audio but i know why it worked fine cause it has the proper files for the DA to work cause its a supported system. i would like to try to help to get xpostfacto to work better on the Beige G3 system
in tiger if it is something to do with xpostfacto -
Problem when syncing with MobileMe
I am using iPhone 3G, software 2.1. I use GMail for email (no problems) but my contacts, and only my contacts, sync through MobileMe.
The problem is that with MobileMe active, my Contact list, "Mail, Contacts and Calendars" settings and several other minor features simply do not work - they open, pause for a few seconds, then crash. The Mail application also hangs and crashes every other time I open it.
My local Apple Store restored 2.1, after which my Contact list and Email worked perfectly until I re-activated my MobileMe syncing, after which the problems resumed.
As the problems occurred only after MobileMe syncing is turned on, I assume this is the cause of the problem, but because "Mail, Contacts..." settings crashes every time I open it I cannot disable MobileMe syncing.
Any suggestions please? All help gratefully received...This was resolved by completely removing the MobileMe account from the iPhone, rebooting it and adding the account again.
-
This problem has only appeared in the past few days before that I had nio problems with itunes. Firstly I discovered that I could only open Itunes once after reboot - thereafter it would not reopen until I reboot again. I have spent considerable hours yesterday talking to the Apple help by phone and tried all there suggestions including of course reinstalling itunes amongst other things. Eventually I thought the problem had been solved when I discovered that I could suddenly open Itunes repeatedly without rebooting. After a short time I then discovered that the reason it was working agai was that I had rebooted with the internet disconnected and itunes would open repeatedly as normal provide I left the internet disconnected. When I reconnect to internet the problem resurfaces. HELP
For those still wondering how to install ios 6.1 on 5th gen iPod, you need to download it off of apples official website and then shift click restore from backup and choose the downloaded ios 6.1
apples one year warrant covers any hardware problems like these right? -
I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred". It was happening before and after the last OS upgrade. I've done a hard reboot with no effect. Any suggestions???
Have either of you had any luck with this issue. It began happening to me today when I was trying to purchase music on iTunes. I have purchased music and games in the past and have had no problem. Any help would be appreciated.
-
Mac shut down due to problem; I rebooted fine. how do I determine what the problem was?
mac shut down due to problem; I rebooted fine. how do I determine what the problem was?
When shut down and rebooted, the Mac OS X does background maintenance on the system. That can solve minor issues.
Beyond this, it is a good idea to run Disk Repair yourself just to make sure.
Reboot with the option key held down. On the screen that comes up select the Recovery disk icon and Continue.
On the next screen Clcik Disk Utility and Continue.
In DU, in the list on the left select the drive to be repaired - click the item that is indented to the right, not an an item whose name starts on the far left.
Click First Aid, then Repair Disk.
After that is done, quit DU and restart as usual. -
Hi guys,
I have a problem with my MacBookPro,quite often reboot with no reason.
Any ideas how to fix it?
This is last report:
Anonymous UUID: A40B711B-5625-0DD5-2087-95D3D8942399
Wed Nov 20 16:11:04 2013
panic(cpu 0 caller 0xffffff80056dc19e): Kernel trap at 0xffffff80057d8560, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xfffffe8018b2ba78, CR3: 0x0000000006d1e002, CR4: 0x00000000000206e0
RAX: 0xffffff8018b2b980, RBX: 0x0000000000000000, RCX: 0xffffff8017ab2c50, RDX: 0xfffffe8018b2ba50
RSP: 0xffffff80f674bd60, RBP: 0xffffff80f674bdc0, RSI: 0x0000000000000025, RDI: 0xffffff8017ab2c18
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000002000, R11: 0x0000000000000028
R12: 0x0000000000000000, R13: 0xffffff8017ab2c00, R14: 0xffffff8017ab2c18, R15: 0xffffff8018b2b960
RFL: 0x0000000000010286, RIP: 0xffffff80057d8560, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xfffffe8018b2ba78, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f674b9f0 : 0xffffff8005622f69
0xffffff80f674ba70 : 0xffffff80056dc19e
0xffffff80f674bc40 : 0xffffff80056f3606
0xffffff80f674bc60 : 0xffffff80057d8560
0xffffff80f674bdc0 : 0xffffff8005976888
0xffffff80f674be70 : 0xffffff80057fa016
0xffffff80f674bea0 : 0xffffff80057e46b3
0xffffff80f674bed0 : 0xffffff80057dda6a
0xffffff80f674bf40 : 0xffffff80057e4657
0xffffff80f674bf50 : 0xffffff8005a3de23
0xffffff80f674bfb0 : 0xffffff80056f3e06
BSD process name corresponding to current thread: launchd
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000005400000
Kernel text base: 0xffffff8005600000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 651720831278
last loaded kext at 265437268283: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f87aa8000, size 65536)
last unloaded kext at 326798130900: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f87aa8000, size 57344)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.driver.AppleIntelHDGraphics 8.1.8
com.apple.driver.AppleLPC 1.7.0
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleIntelHDGraphicsFB 8.1.8
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOSurface 91
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0Yesterday was this one:
Anonymous UUID: A40B711B-5625-0DD5-2087-95D3D8942399
Sat Feb 1 16:54:32 2014
panic(cpu 3 caller 0xffffff80062dc19e): Kernel trap at 0xffffff800624dc20, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xfffffe802cafa558, CR3: 0x000000000696e001, CR4: 0x00000000000206e0
RAX: 0xffffff801b20f980, RBX: 0xfffffe802cafa558, RCX: 0xffffff80186ba8a0, RDX: 0xffffff80d86f5650
RSP: 0xffffff80eea03df0, RBP: 0xffffff80eea03e40, RSI: 0x000000004b509918, RDI: 0xffffff801b20f978
R8: 0x00000000ffffffff, R9: 0xffffff80eea03f20, R10: 0x00000000ffffffff, R11: 0x0000000000000206
R12: 0xffffff801b20f960, R13: 0x0000000000000000, R14: 0xffffff80068d4c40, R15: 0xffffff801b20f970
RFL: 0x0000000000010016, RIP: 0xffffff800624dc20, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xfffffe802cafa558, Error code: 0x0000000000000000, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff80eea03a80 : 0xffffff8006222f69
0xffffff80eea03b00 : 0xffffff80062dc19e
0xffffff80eea03cd0 : 0xffffff80062f3606
0xffffff80eea03cf0 : 0xffffff800624dc20
0xffffff80eea03e40 : 0xffffff8006219970
0xffffff80eea03e60 : 0xffffff80062187a1
0xffffff80eea03ea0 : 0xffffff800621b2f4
0xffffff80eea03f00 : 0xffffff800621eb7d
0xffffff80eea03f40 : 0xffffff800621d41b
0xffffff80eea03f70 : 0xffffff80062c921d
0xffffff80eea03fb0 : 0xffffff80062f3e26
BSD process name corresponding to current thread: launchd
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000006000000
Kernel text base: 0xffffff8006200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 11880174867420
last loaded kext at 4086120321543: com.apple.driver.AppleUSBAudio 2.9.3f17 (addr 0xffffff7f88703000, size 303104)
last unloaded kext at 8870566685847: com.apple.driver.AppleUSBAudio 2.9.3f17 (addr 0xffffff7f88703000, size 303104)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleIntelHDGraphics 8.1.8
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHDGraphicsFB 8.1.8
com.apple.driver.AppleLPC 1.7.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleIRController 325.7
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
System Profile:
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3032302E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3032302E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK5055GSXF, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
USB Device: Hub
USB Device: Internal Memory Card Reader
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: -
Problem is detected with Array : 01
I was backing up my server when it suddenly turned off. When it restarted it showed a critical error message saying "Problem is detected with Array : 01".
Windows tried starting and kept rebooting so I just turned it off.
When I launch the RAID utility I clearly see that the drive 02:01 seems ok but the other one is marked as "failed orisconnected" (it is connected ans spinning).
This is the spec: On the server I have windows 2012R2 installed on two HD 1TB on RAID1.
I habe an unused NAS, so I decided to create an iSCSI drive as a Target, and run the windows backup utility to do a Full Backup on it.hat may I have done wrong and how could I resolve this issue?
This clearly is related to the windows backup utility since this server was working fine until then.
Thanks.Hi,
The issue could be due to that one of the two drive is failed in the RAID 1. You need to replace the failed drive and rebuild the array automatically.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Nexus 1000V. problem when working with the console VMWare
I have a problem when working with the console VMWare.
Sometimes it is impossible to connect any of the hypervisor to the guest OS managed by them.
I get the message: "Unable connect to the MKS: Host address lookup for server <name of the hypervisor> failed: No such host is known."
This message always appears in conjunction with the reconfiguration of virtual switch: "Reconfigure vNetwork Distributed Switch .... Initiated by Cisco_Nexus_1000V_ ....."
Upon completion of the reconfiguration, Communication console, with guest OS is restored, or on its own or after a reboot srv-vc.
In this time, I do not see any message in Nexus 1000v log.
What is this?
Thanks in advance.Smells of a DNS issue. Are you sure your ESX hosts are reachable from your client via DNS hostname? Try pinging them from a command prompt/terminal. You may have DNS server issues.
As a temp fix, edit your [windowspath]/system32/etc/drivers/hosts file and manually add the ESX host name and IP, then re-test.
Regards,
Robert -
System reboots with audigy2 value. get irql less than or not equil. please help new c
hello my name is carlos
my system reboots at random (more in games) with audigy 2 value..
could someone please advise me on the problem i have with my new audigy 2 card. i would like to get it working and not have to get another card. i got this one because my onboard sound is so junky with midi music and has a poor s/n on recording. the blaster card seems to meet my expectations except for the reboots.
i have read on forums about this same issue with ati video cards in the 9200+ range so i thought that might be the cause but i went back to the onboard audio and the problem went away.
at random my system reboots. i get an error.. irql_not less than or equil or something like that and then it reboots. i let it submit to microsoft and they only say its a problem with a device driver. i have all the updated drivers for all my hardware at this point. i have all the windows updates as well. my xp is legal. i dont think its the power supply but.. could it be? the readings with my digital meter are normal. i have an older but quality digital multi tester. got it when in college. so i know its accurate. it reads 4.9 on 5 and 2.2 on 2. all this info because of the information i have read already. is the audigy a power hungry card? cause i dont get any reboots when i use the onboard sound and my ati video so what ever is going on it has something to do with the sound card.
i cant find a newer driver on the driver site for it except for the beta. so i assume there is no updated driver for the card.
i have a ups backup system. it has come on but it has never caused a computer hang when it has. its a 250 watt unit with plenty of battery backup. same battery backs up my ham radio equip. i am going to reinstall the card and see if in some chance it is munipulating the waveform to the supply. the power to the machine reads 22 volts.
i have had some issues with the power company recently. they had to do some major repairs because i was having problems with flickers. but they fixed... [Show more]thank you for your reply to my problem.
sorry i missed that detail in my information. that is one of the things i checked. video is on 6 and audio is on 7. i dont see any other devices sharing those irqs in the device manager irq information. or any other devices on same irqs or i/o
before anyone mentions it i also have 3 fans sucking air. my case is actually an old server case with lots of vent holes in front and side. i was thinking of getting some of the slot fans and blowing on video and sound card. could this be the issue? the monitor app says my sytem temp is 82 degrees. 27 on processor.
i appreaciate the input. i ran it all night last night with nero media player running with visulations on. the music was still playing but the video was locked up when i checked it this morning? nothing but mushrooms on my screen from the visulation. i dont know if something happened with nero (most likely this time) but thats the first time that error came up. the odd thing about this really is that it may go for hours and not do this but it seems to do it more when we play demanding games. i ran the machine yesterday for hours on my inverter (ups system) from the batteries with no problem. its output is just a little hotter than my house voltage 27 volts and my line volatage is about 9. but it may reboot before i get this post completed. it ran without problem for 7 hours with all the major games i have until the batteries ran down. (two high capacity 2 volt deep cycles on the outside deck)its really odd. its almost at random. at this point i suspect that i have a power supply problem of some sort. im gonna get a new supply by friday and see if that hel
ps.
i have to wonder who makes the best supply? anyone have any sujestions? perhaps whats really causing this is the capacitors in the supply cant sustain a clean output with the shaky power supplied by aep at my home. aep says that they fixed the problem but i still see flickers. i dont have any problems with the power on anything else in my home. im a little particular. lights that flicker bug me. its not a serious flicker just a slight diming that i have tried to catch with a dvm meter and cant. i have a 350 watts supply but its probably not the best made supply out there. i bought it at a local place that sells off brand computer parts. my fault i guess.. i've had it for maybe 3 years. i had a supply go bad back then and ruin a hard dri've on me. im bad for giving more info than needed but im just a yacker. thanks for the help.. -
Volume Keys proble when rebooting with iMic
Since updating to 10.4.5 (and the 10.4.6 update did not fix the problem), I have noticed that the the keyboard volume adjustment for the external speakers does not work after a reboot if I have my Griffin iMic attached to the system. The keyboard volume adjusdtment will only work for the iMic. I can adjust the volume with the menubar adjuster. If I reboot the system a second time, the keyboard adjuster will work correctly.
I also found that if I plug in the iMic after a reboot that the keyboard volume keys do not work for the iMic.
I am using old pc speakers connected to the audio-out port of the PB and a pair of Sennheiser headphone/microphone (PC150) attached to the USB iMic. However, this happens regardless of whether the speakers are attached or I use the builtin speakers.
I am also running SoundSource 1.0.5 from Rogue Amoeba Software. But I have been running SoundSource since I purchased the iMic.
Does anyone have an idea what I can do to fix this?
Scott
Powerbook G4 17-inch display Mac OS X (10.4.6)This was resolved by rebooting with the iMic connected to the system. It has the problem only after an update. After that, it is no longer a problem.
-
Samaba sharing is disabled after reboot, with incorrect share config
Hi all,
I bought my macbook pro with OS X 10.4. Ever since I've upgraded, I'm unable to get my samba server to work correctly. I have a Cent OS server running samba, and all my other clients can connect to it, so I know its not an issue with the Windows clients. I would like to share my Movies folder so my wife can watch videos I download. Some are in iTunes, some are Divx. I've done the following.
1. Go to System Preferences -> Sharing
2. Under "shared folders", I click the plus and add the directory "Movies"
3. I set my account to "read only" and "everyone" to "read only"
4. Go to System Preferences -> Accounts
5. Select Guest Account and check "Allow guests to connect to shared folders". I leave guest login disabled.
6. Reboot
With the above steps, I expect that the only share listed would be "Movies" and that I can access it with an anonymous samba client. However, I randomly get folders I'm not expecting. For instance, this is how I tested my setup.
1. On a windows computer I telent to the correct samba ports. "telnet 10.10.1.101 139" and "telnet 10.10.1.101 445". Both connect to the socket, so I'm ok at the firewall level.
2. Test what shares are listed with "smbclient" on my mac. I enter "smbclient -L 10.10.1.101" in the command prompt. When prompted for a password, I just press enter. I get the following output.
$ smbclient -L 10.10.1.101
Password:
Anonymous login successful
Domain=[NINE] OS=[Unix] Server=[Samba 3.0.25b-apple]
Sharename Type Comment
IPC$ IPC IPC Service (TODD NINE’s Computer)
todd nine's public folder Disk TODD NINE's Public Folder
Anonymous login successful
Domain=[NINE] OS=[Unix] Server=[Samba 3.0.25b-apple]
Server Comment
MACINTOSH-3 TODD NINE
Workgroup Master
NINE
Definitely not what I've configured via the gui! Also, whenever I reboot and go into the sharing gui the "Share files and folders using SMB" is always unchecked. It would seem that my settings are hosed and the gui isn't correctly persisting my settings and restarting the Daemons. I'm not sure which plist files to delete to start with fresh settings, and I'm reluctant to start blasting critical system files without being sure of what I'm doing. Any guidance would be greatly appreciated. I've already followed a couple of how to's that worked for most people, but they didn't resolve my issues.
Thanks,
Todd
Message was edited by: tninePresumably related to this problem is that if I try to restart the svc it gets disabled.
For example (while tailing /var/svc/log/site-bind9:default.log in background):
bash-3.00# svcs bind9
STATE STIME FMRI
online 3:37:45 svc:/site/bind9:default
bash-3.00# svcadm restart bind9
[ Apr 17 03:38:07 Stopping because service restarting. ]
[ Apr 17 03:38:07 Executing stop method ("/opt/bind/var/svc/method/bind9 stop") ]
[ Apr 17 03:38:07 Method "stop" exited with status 0 ]
[ Apr 17 03:38:07 Disabled. ]
bash-3.00# svcs bind9
STATE STIME FMRI
disabled 3:38:07 svc:/site/bind9:default
Any ideas what is wrong with this svc (manifest posted above) ? -
Equium - Black screen and cant reboot with the recovery disc
I have a black screen and cant reboot with the recovery disc but I seem to be getting nowhere.
I find it strange I cant ask Toshiba direct about my problem but I have to wait for a kind hearted person to solve my problem or give me a helping handOf course you can ask Toshiba. Toshiba has Authorized service providers worldwide and I hope some of them are in your country too.
So please visit Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Download > Find an ASP and contact nearest service provider. Just explain the situation and I hope they will help you.
Back to your problem:
It is not easy to say why this happen. The whole issue is not described so well and I am missing some important points.
Maybe you have upgraded RAM and now notebook doesnt start properly. It is also possible that CPU is defective. It can be so many different reasons for this.
Best thing you can do is to contact service and ask for help. they can run diagnostic tools and find out quickly what the problem is.
Maybe you are looking for
-
Displaying 10 records per page
hi, somebody please help me..... i have a list of more than 20 records which i get from database and then i put it in session. i have to display 10 records per page only and on the same page i'd like to have links to page numbers to view next set of
-
I have a Mac Book Pro 2.4 GHz Intel Core i7; Memory 4 GB 1333 MHz DDR3 Mac OS X Version 10.7.5 I updated to iTunes 12.0.1.26 and I am trying to burn a playlist and I get the following message: "Disc burner or software not found" . I have burned lot
-
Not able to open Dataset when adding Encoding Default
Hi Experts, I have an urgent requirement . I wanted to make one programs Unicode Complaint I had to change the statement open dataset gv_string in text mode for output. to open dataset gv_string in text mode encoding default for output. But afte
-
Creating DB2 data source in weblogic 9.2
Hello, Steps how to create DB2 data source in weblogic 9.2 especially what driver to use for the same.
-
Is there a way that I can run the Function Security Menu report in Oracle 11i for all responsibilities at the same time? I need to provide this information for an audit of user responsibilities and I need this report for each active responsibility (I