Problem Bug With My Ipod 30Gb Black (5.5g)

Hello everybody
j'ai un ipod 30gb black (5.5gb) et j'ai un petit problem pour les vidéos
j'ai a peux pres 40 clips vidéo donc je lance une pour regarder et apres si je mets une autre ou encore une autre ca bloque et je suis obliger de cliquer sur Centre + Menu pour redemarrer ( tout dépends parfois ca bloque a ma 5 eme lecture de vidéo ou 3eme voir 7 eme )
je comprends pas d'ou ça vient
je sais quand il va bloquer, c'est lorsque que quand je monte le volume ou si je l'abaisse, il n'apparrait pas a l'écran mais juste le niveau de batterie
merci

just try and try again. geting it intodisc mode (hol menu + select until apple logo) them switchiong to select and play untill white screen apears. eventually itunes recognises it where you an then restore it. then eventually works again. just dont give up when itunes becomes un responsive. it will work after a while. hope this helps someone in the future even though i figured it out for myself lol

Similar Messages

  • Hello, I have a problem 4th with my iPod touch

    Hello,
    I have a problem 4th with my iPod touch
    I just wanted to edit a picture, and then he is always crashed.
    Hope someone can tell me what to do.
    THX, Soundwave1409

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Recent problems occurring with new iPod Nanos as well?

    Are the recent problems associated with the iPod firmware version 1.2 occurring with brand new Nanos, or are they only occurring with Nanos that were running previous versions that have been updated to the new version? I've been considering buying a Nano, but may reconsider if the problems are happening with new ones as well.

    I bought a 2GB iPod nano over the weekend. It works great, as long as I don't try to put more than 215 songs on it. iTunes crashes and freezes my iPod every time I try to fill it up more than half way. Every crash requires a hard shut down on my mac and restoration of the iPod.

  • Problem/bug with AIR 3.0

    Hi guys,
    I'm here again. I got this error when I tried to publish my project with AIR 3.0.. Actually, I've created an application usign AIR 2.6 (default comes with CS 5.5). It was used to get published and I used to update it on regular basis. Few days back I had to copy AIRSDK3 folder to Adobe's program files' folder, where I renamed AIR2.6 to anything else and AIRSDK3 to AIR2.6... Today, when I tried to publish my same project,  I got this following error. Hope that would help adobe (as it is beta version).
    (By the way, when I renamed the folders to their original names, it worked and published).

    Steve,
    We have seen the same thing and reported it to Forte. We have not yet
    heard back with a bug report number...
    For now, we have removed all comments from our sql code.
    Derk
    >
    We have just switched from version 2.0.H.1 to version 3.0.F.2 in development,
    and have discovered a bug with comments in SQL code.
    Anywhere in a cursor definition, or within SQL code in a method, if we use the
    multi-line comment format "/* ... */" even on a single line, then the code
    compiles fine, but crashes at runtime with a "Invalid SQL Command" error. It
    looks as though Forte is including the comment as part of the SQL!
    Has anyone else seen this problem? We have not found it in the known bugs list
    for 3.0.F.2 or the fixed bugs list for 3.0.G
    This worked fine for us prior to version 2, and if we don't get it fixed in
    Forte, it means a lot of rework to change the existing comments to single-line
    "// ..." format.
    Regards,
    Steve Isaac
    Senior Consultant, Information Services Group
    Hydro Electric Corporation of Tasmania
    4 Elizabeth St, Hobart, Australia, 7000
    Phone : +61 03 6230 5161
    e-mail: [email protected]
    Check out: http://mama.indstate.edu/users/sodana/lucado.html
    *** Derk Norton ***
    *** U S WEST Communications Voice : (303) 965-8772 ***
    *** 1801 California Street FAX : (303) 896-3565 ***
    *** Denver, Colorado 80202 Email : [email protected] ***
    **********************************************************************

  • There seems to be a problem/bug with the latest version of iPhoto.

    The current version causes video/movie clips to freeze and screen go black when first opening (whilst the audio continues). This wasn't a problem in the previous version.
    Any other users find the same issue?
    Can this be fixed for the next version upgrade please?

    LarryHN - I did say in the post that this relates to the current version of iPhoto i.e 9.4.2. It isn't a problem with the clip not playing, simply that occasionally the image freezes.
    Thanks Old Toad, the video clips (standard MJPEG imports from an SD card) work perfectly fine on Quicktime Player.
    Personally I'm convinced that this latest version of iPhoto has a problem as it never happened in the previous version. But happy to wait and see.

  • Sms problem bug with nokia 6710 navigator

    hi, i'm jack, surfer from italy. 
    the new kind of t9 with nokia navigator 6710 is really really bad, i'm searching to get the older one on this phone.
    the problem is that when you press * to change the word, the phone become slower, and open a new window where you can see the words and choose. this thing is really uncomfortable and make you really slower and harder to complete the sms.
    the big problem is that you can't enable or disable this option, you must use it! this is a very bad thing from nokia, cause people must choose their way to write sms.
    i can disable and enable t9, so why can't i enable and disable this option? this is a bug from nokia in this phone!
    please help me to find a patch, a software or something else to solve this problem, or if doesn't exist i need someone that advice nokia to put something to download on the site, to solve this problem.
    thank you

    1st of all dont store alot of text on phone this slows it down
    2nd try a soft reset this restores phone to out of box state the code is *#7370# security code is 12345 back up contacts and apps etc
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Problem/bug with mouse over movieclips

    Been facing an annoying problem at here: www.villielain.com
    Different site sections are located in animated objects
    (mostly glowing) and when you mouse-over them the bottom menubar
    shows up. The problem is that, when you go fast over multiple
    objects (for example tv - cross - wall), the menu bar won't go
    away.
    I've separate actionscript layer for the menu items and can
    send the original open file if it helps.
    any suggestions? thanks.

    Issue 1: If the user leaves the Flash area (and moves over to
    the black html background in this case), Flash doesn't register a
    RollOut event, because Flash isn't underneath your mouse to capture
    it.
    Issue 2: Another problem is that when you display a new menu,
    your code should remove or override any menu that's currently
    displayed, rather than just adding a new menu to the stage or
    making a new item visible.
    Issue 2 can be fixed with some improved code. Issue 1 is a
    Flash (AS2) limitation, but there are some workarounds. You can
    start a timer when a button is rolled over. If no rollout event is
    triggered after the designated time has elapsed, you can check the
    location of the mouse and perform a hit test with your button.
    Solving issue 2 will also reduce the occurrences of issue 1.

  • Problems sychronising with my iPod

    Help!
    My iTunes crashes every time I try to sychronise my iPod. I reckon it must have something to do with all of the other problems people are experiencing - can anyone advise?
    This is the second big problem I've had with iTunes and Apple never seem to offer any advice - or apology!
      Windows XP  
      Windows XP  

    First try the "Five Rs", and then let us know if you are still having problems.
    http://www.apple.com/support/ipod/five_rs/

  • Trouble with new ipod 30GB w/video. also trouble w/ itunes

    here's the story: i just got a new ipod (the 30 GB with video). i got tired of my little shuffle with no screen.
    so, i put my whole itunes library onto the ipod and everything was working fine. i loved it. then, i deleted some items from my itunes library on my laptop because it was taking up needed space on my hard drive, i figured this was fine, since i still have it on my ipod, and i can watch/listen to them anytime i want. But, when i went back later to put some new stuff on my ipod, 2 shows and 2 of my favorite podcast episodes were deleted from the ipod that i had put on before!
    -i checked the manual, it said that i need to be in the manual mode instead of itunes/ipod automatically updating the ipod's library. i was transferring stuff manually, but it still got rid of some stuff on it's own.
    the music was all still there, but a tv show episode, and 2 of my favorite video podcast episodes were deleted.
    -Will this always be a problem everytime I hook it up to my laptop and want to add new stuff to my ipod? I don't even have half of the ipod filled. it says that I have 20Gb of free space.
    i want to be able to keep stuff on my ipod that i will delete from my itunes library/hard drive. such as movies, tv shows, my favorite video podcast episodes. But at the same time, I want to be able to add new stuff. Is this Possible?? please help! is the ipod/itunes programmed to delete everything from the ipod that is not in the itunes library????

    i chose the option manage music and video manually.

  • Problems (bugs) with Project Explorer LV8.5.1 Windows Vista 64bit

    Helo all,
    I am using Windows Vista 64bit with all updates and service packs on an ASUS G1 dual core 4gig memory.  After writing code for a while I find that I cannot execute my top level vi from the project explorer.  I can run the vi from outside the project no problem.  If I try to create a new project and load the vi into it the LV hangs and the windows task manager cannot kill either the vi or the new project explorer, I have to reboot the computer to recover.  I have attached the vi.
    regards,
    Karl
    Attachments:
    FS Test Main V0.9.vi ‏164 KB

    Hi Karl,
    I am having a look at this issue--I shall try to reproduce it and get back to you with my results.
    Ipshita C.
    National Instruments
    Applications Engineer

  • Are there any known problems/bugs with Lion pre-loaded?

    I'm in the market for a Macbook Pro and am wondering if I'd be better off getting it now before it comes shipped with Lion and install it later on when any bugs are worked out.

    When I called last night they said they couldn't tell me if they were going out with Lion yet but reminded me of the free upgrade if it didn't come pre-loaded. The local store I called said they were still selling MBPs without it.

  • Problem/bug with 3102

    Hi, We use 3102 as pstn gateway, fxo line configured as hot line((S0 :102>)). At office it is established 5 SIP devices(101,102,103,104,105). We shall admit someone from office the line calls in pstn accordingly fxo is borrowed and if during this moment someone still tries to call in pstn that this second call beats off with Service Unavailable. After that 3102 tries to dial the number hotline as if the call has come from pstn!!! If someone from office answer on this call we have conference, and after hangup this zombi call all parties disconnected. I not understand why him recall back on busy fxo line???

    And once we have Service Unavailable on not used fxo line, but same him make zombie call.

  • Very weird problem with my iPod

    I have a 4th generation 40 GB iPod. I have a strange problem happening with my iPod. After it is fully charged I can use my iPod no problems, after what seams a random amount of time the screen seams to freeze and go pixely. The music plays fine but I can't go through any menus. After the battery dies I charge it and the screen is working again fine.
    Any ideas on why and how this happens would be great!

    dk07, glad to know I'm not the only one having this problem. I hope you can get it figured out as well. It is very frustrating.
    Jeff, I appreciate the links, but I've been over those first two quite a few times, with no success. The last one is a bit more interesting though.
    I guess what I mean to ask is; Is it possible that my iPod is actually charging all the way, even if I never get a "plug" icon and the bar never goes above 3/4 on the battery indicator, no matter how long I charge it? Can the battery indicator be 'that' off? I have yet to run into a help topic or tutorial that addresses specifically an iPod (with a brand new battery) never switching to the plug icon or never going beyond a 3/4 bar. I am willing to accept that the battery indicator may be inaccurate as to the actual charge, but the specific issues seem not to be as common as the general one; and that is what bugs me.

  • Problem synchronizing with iPod

    A user is have quite a few problems synchronizing with his iPod.
    He is only able to sync if he logs in as an administrator (he has two accounts on the machine), runs iTunes, cancels the sync (the administrator account doesn't have the music files), closes iTunes, logs on again with his regular account, and opens iTunes again.
    It seems to be a permissions issue, but he does have administrator permissions on the folder when using his regular account.
    How should iTunes be set up so that administrator permissions aren't needed to sync with an iPod?
    In addition, is there a way to update iTunes software via the updater without administrator permissions?

    Is Fast user switching enabled on the PC?
    Checking on this because iTunes doesn't like Fast User Switching on XP or Vista. See:
    iPod for Windows: Fast user switching in Windows XP and Windows Vista is not supported

  • Language settings on new 30gb black ipod

    My sister received an iPod (30gb black) for Christmas this morning. When she turned it on, she tells me the display is showing a collection of symbols as opposed to text. I am guessing the language is set the Chinese or Japanese???
    I am currently away so am unable to figure it out!
    Anyone able to explain the process to change the language to English.

    See this.
    How to change the display language.
    http://i33.photobucket.com/albums/d67/JeffB001/image.gif

Maybe you are looking for

  • Configuration of internal PI 7.0 communications to use https

    I am looking for some clear documentation on how to do this.  I have read through the documentation discussing this but it does not specifically tell you the steps.  This is the type of verbiage I have found: "The components of a process integration

  • Can't store new target Array index out of range: 1 - SLD Configuration

    Hello , Issue is regarding SLD configuration , We have ABAP + Java Addin on Suse Linux x86 ( 64 bit ) with Oracle 9.x . Java instalaltion competed succesfully , J2EE is up and runnung while configuring SLD , Data Supplier Bridge - Configure the data

  • KM Document Expiry Notification

    Hi,   We have a requirement to generate notifications upon the expiry of a document in KM. I am aware that the Lifetime service is available for controlling when a document becomes accessible to users with read-only access. Taking this a step further

  • IMPDP and GATHER_SCHEMA_STATS

    1.Do I have to GATHER_SCHEMA_STATS after every IMPDP of data? 2.How frequently should we gather schema level statistics?

  • How to generate 300 DPI image from canvas using Imagesnapshot

    Hi all, I want to generate image from my canvas. I tried using bitmapdata and imagesnapshot. Bitmapdata has no property called DPI. Imagesnapshot allows to set DPI but it is not generating 300 dpi image. Any idea?