Problem charging 0MATERIAL INFOOBJECT Hierarchy from R/3 into BW

Hi everyone,
I'm having this problem when trying to load data into this infoobject's hierarchy. The problem is that i'm recieving an information IDOC  with status 8. it's message says that the table that the process is trying to get the data from in R3 is empty. but it's not telling me wich R3 table it is.
Does anyone know wich table is that?
And maybe someoneknows how to insert the hierarchy data on it?
I prefer a standard solution, but it's no problem to do a Z extractor for it. Tesource system is retail but i don't know if it really matters.
Tank-you!
Artur.

Hi,
This means Hierarchy structure is not maintained by R/3 people and they need to maintain the R/3 hierarchy.
please check it out in KCh3 t.code to see the Hierarchy subculture of this.
We also got the  same in RSA3 when runned for some Infoobject 0comp_code hierarchy.
Are u getting any Hierarchy while running in Rsa3 t.code or not getting anything.
Please letme know to comment on this issue.
Regards,
Anand Tej.

Similar Messages

  • Problem with Fetching Million Records from Table COEP into an Internal Tabl

    Hi Everyone ! Hope things are going well.
           Table : COEP has 6 million records.
    I am trying to get records based on certain criteria, that is, there are atleast 5 conditions in the WHERE clause.
    I've noticed it takes about 15 minutes to populate the internal table. How can i improve the performance to less than a minute for a fetch of 500 records from a database set of 6 million?
    Regards,
    Owais...

    The first obvious sugession would be to use the proper indexes. I had a similar Issue with COVP which is a join of COEP and COBK. I got substanstial performance improvement by adding "where LEDNR EQ '00'" in the where clause.
    Here is my select:
              SELECT kokrs
                     belnr
                     buzei
                     ebeln
                     ebelp
                     wkgbtr
                     refbn
                     bukrs
                     gjahr
                FROM covp CLIENT SPECIFIED
                INTO TABLE i_coep
                 FOR ALL ENTRIES IN i_objnr
               WHERE mandt EQ sy-mandt
                 AND lednr EQ '00'
                 AND objnr = i_objnr-objnr
                 AND kokrs = c_conarea.

  • Problem in Loading Material Hierarchy

    Hi,
    I am having problem while loading material hierarchy from R/3. Whenever i execute infopackage for infosource 0MATERIAL, I am getting following error msg.
    <b>The node name for ID 00005983 contains invalid characters</b>
    Diagnosis :                                                                               
    Node name DVD77ELR-D2        with node ID 00007774 contains lower case   
    letters or characters that are not permitted.                                                                               
    System response:                                                                               
    Processing was terminated                                                                               
    Procedure:                                                                               
    Change the node name so that it only contains permitted characters.      
    Procedure for System Administration
    As a result the Request is in RED state.
    Please suggest any solution ASAP.
    Regards
    Prasad
    Note: Ponits will be awarded for fast and correct response.

    Hi...
    Thank you all for reply.
    I have solved the problem. But this was not related to RSKC.
    This was due to a material code DVD77ELR-D2 which was not created correctly. I have removed the hierarchy assigned to this material and marked it for deletion.
    Now the hierarchy has been loaded perferctly.
    Regards
    Prasad

  • Syntax error while loading hierarchy from an external file

    Dear Expert:
    I am new to BW and I met a problem today while loading hierarchy from an external file. Actually I am following below article to load the hierarchy:
    /people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
    When I schedule the infopackage, the error message says: "Syntax error in template RSTMPL9C, ROW 76". Actually there is only around 20 lines of records.
    Since I am not familiar with hierarchy load, so:
    1. while loading from external file, do I need to create one hierarchy in advance  through "Maintain Hierarchies" in the infoobject? My understanding is since I can load that hierarchy from file, so I do not need to create one in advance, once the load completed, the hierarchy should automatically generated there. Is my understanding correct?
    2. Before loading the hierarchy, do I need to load the master data of external characteristics in the hierarchy first? Here in my example, the sales hierarchy has 2 external characteritics (Country and region) in the hierarchy. Do I need to load some data first?
    3. My 'Preview' function in the infopackage is gray so that I can not test the data loading. Why is it gray?
    Information like file name, file dir, file type(csv), seperator should be correct there.
    Can anybody help me take a look into that? Many thanks for your time in advance!
    Tim

    Hi ctsiszidane:
    There are some other SAP Notes that can help you solve the problem.  Depending on your Support Package level check which of them is applicable.
    Note 659461 - RSAR 682: Syntax error in template RSTMPL9A, row 246
    Note 605690 - Escape characters are not processed correctly
    Note 620152 - Syntax error in RSTMPL9A during data loading from a file
    Regards,
    Francisco Milán.

  • Import package from one project into another

    Hello everyone,
    I have some projects.
    An enterprise and war project created in netbeans.
    I would like to use some files from one project to another. when I import
    the package I get the error-
    'package x does not exist'
    I have added the package to the project but I still get the error.
    I have also added the project to import to my glasspath but still.
    E.g.
    set classpath
    .;c:\enterpriseA;
    My next idea is to create a war project into my enterprise project and copy the files
    from the war project into it in order to use it. But I'm sure there is a better way.
    THanking you in advance.
    eve
    Edited by: evepokua on Nov 22, 2009 1:44 PM

    One mistake I keep making is that I don't add the package to the
    Dependencies of the plugin I'm writing. You have to go to plugin.xml,
    and add the package you depend on to the Dependencies section. Maybe you
    didn't do this?
    Michael
    nasti wrote:
    > Hello everybody!
    > I am new user of osgi and eclipse. I tried to do some of Oscar examples
    > but I had some problems. Namely, the problem in import of package from
    > one project into another in Eclipse.
    > I add first project to the Build Path of the second one.
    > I add to the first project manifest line: Export-Package example2.service.
    > I add to the second project manifest line: Import-Package example2.service.
    > But when I tried to execute these bundles the
    > java.lang.NoClassDefFoundError was occurred. May be you will help me
    > with this problem.
    > Thanks....
    >
    >

  • Importing from a DVD into Premiere CS6 and MPG files.

    HI I'm new to this forum and to CS6. I'm well versed in CS3 Premiere and other earlier versions.
    I have a problem importing the VOB files from a DVD into Premiere CS6. I copied the VIDEO_TS folder from the DVD onto my hard drive and successfully imported the 3 VOB files that made up the 1 hour video. Upon placing them into a sequence (720 x 576 25fps DV PAL to match the DVD) I found that when I played over a join between the VOB files, the picture and sound briefly broke up. Is this normal? There is no encryption on the DVD.
    I then used MPEG Streamclip to convert the DVD to a MPG2 with MP2 audio file (thereby avoiding a decode and the subsequent recode when I encode the edited version, I.E. DVD is MPEG2 so I want to extract the video with the minimum of processing.) I tried to import this into Premiere but after it thought about it for a while, the resulting icon in the Project Window indicated that the file was not usable. Indeed it was not. I deleted it...... and then imported it again. It worked! This is not just a one-off occurrence. Any thoughts?
    Premiere is fully updated along with all the other programs in CS6. Using Windows 7 64 bit.
    bye Andrew

    I have same issue too.
    Who can help me
    Used "Media Encoder"  encore three . VOB(form DVD) files to WMV.
    And used Premiere to import the file between the VOB files,
    the sound briefly broke up.
    If change to import .VOB form dvd,the sound briefly broke up too.
    thanks!

  • How to load hierarchy from file into InfoObject with compounding Attr & LN

    Hi,
    I have created an InfoObject called YCOSTC0 which has a compounding attribute 0CO_AREA. and Text is Lanugage dependent, hence the key is YCOSTC0, 0CO_AREA and LANGUAGE, now when i load hierarchy from flat file as mentioned below, it creates duplicate blank rows in master data table, becuase the flat file contains only the YCOSTC0 Info Object and this data gets loaded into 0CO_AREA column in master data table which is the first column. how can i load hierarchies from flat file into an InfoObject that has a compounding attribute and Language dependent. please provide me a sample file structure with data.
    NodeID     InfoObject     Node Name     Link Name     Parent ID     Language     Short Text     Medium Text     Long Text
    1     0HIER_NODE     CC_HIER               EN     Cost Center Heirarchy     Cost Center Heirarchy     Cost Center Heirarchy
    2     YCOSTC0     C001          1     EN     CC 1     Cost Center 1     Cost Center 1
    3     YCOSTC0     C002          2     EN     CC 2     Cost Center 2     Cost Center 2
    4     YCOSTC0     C003          2     EN     CC 3     Cost Center 3     Cost Center 3
    5     YCOSTC0     C004          3     EN     CC 4     Cost Center 4     Cost Center 4
    6     YCOSTC0     C005          3     EN     CC 7     Cost Center 7     Cost Center 7
    7     YCOSTC0     C006          4     EN     CC 5     Cost Center 5     Cost Center 5
    8     YCOSTC0     C007          4     EN     CC 8     Cost Center 8     Cost Center 8
    9     YCOSTC0     C008          4     EN     CC 10     Cost Center 10     Cost Center 10
    10     YCOSTC0     C009          7     EN     CC 6     Cost Center 6     Cost Center 6
    11     YCOSTC0     C010          6     EN     CC 9     Cost Center 9     Cost Center 9
    Thanks
    Akila R

    Hi -
        Check the following link.
    Hierarchy Upload from Flat files
    Anesh B

  • HT1476 I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out i

    I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.

    Hi melvin victor,
    Welcome to the Support Communities!
    The information below may help you troubleshoot your iPhone battery issue:
    iPhone Battery and Power - Apple Support
    http://www.apple.com/support/iphone/repair/battery-power/
    Battery & power
    Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
    I hope this information helps ....
    - Judy

  • Building hierarchy from several diffrent infoObjects

    Hello,
    I have a cube with several infoObjects – all of them are reference of 0customer. The first infoObject is country manager, the second is area managers and the third is agents. I need to build a hierarchy from these infoObjects (country manager>area managers>agents) The infoSource is designed to bring each one of them in a different cell of the extract structure (each one of them is a different infoObject). I have the complete hierarchy (with all the "managers") in 0customer.
    How can I build a hierarchy from them? I don’t want to use the "display as hierarchy" functionality.
    Please Advice,
    David

    just solved it
    I put the 0customer as external Chars. in hierarchies of itself.
    If i want to show the hierarchy: country manager>area managers>agents i should put the agent in the rows/columns and use the workers hierarchy which contains the country manager and area manager which are above the agent.
    Thank you Simon!!!
    David

  • 0MATERIAL attributes deleted from the active version of the InfoObject.

    Hello Experts ,
    As per a Business requirement , I deleted some of the system defined attributes of the 0MATERIAL charecteristics , and found the new active version of 0MATERIAL is incompatible with the SID table , Attribute and text master data table. I tried to copy the original version of 0MATERIAL from the business content  but the system is not allowing me to do so , instead it duplicated all the attribute fields twice in the 0Material and created 3 version of 0MATERIAL  "active" , "revised" and "content".
    Also one user defined attribute BW_MATN was created , and now wants to get rid of that.
    I want to revert back the original master data field (attribute and text) and other technical settings of 0MATERIAL infoobject equivalent to that in Business Content, and should have ideally one active version of 0Material "   during that process if I require to loose the current master data that is fine.
    Kindly Advise how to achieve that .
    Regards
    Deblina

    As per a Business requirement , I deleted some of the system defined attributes of the 0MATERIAL charecteristics , and found the new active version of 0MATERIAL is incompatible with the SID table , Attribute and text master data table.
    You should have created a Z infoobject by the name ZMATERIAL by using 0MATERIAL as a template and then modified it (ZMATERIAL)  .
    Also if you find any attribute of an Infoobject is of no use then instead of deleting it just leave it as it is as SAP has provided it for some reason and you never know when you need them in future .
    And yes you cannot install the business content version of 0material if there is data in the master data table .
    By the way which version of BI are you working on ?
    If you are on  BI 7.0 SP 23 or higher (BW 7.3)  then there are some new additional functionality added to delete the master data with ease .
    Refer the below URL for the same
    http://scn.sap.com/community/data-warehousing/netweaver-bw/blog/2012/01/01/bw-730-different-ways-to-delete-master-data
    Hope this helps .

  • Product Hierarchy from R/3 to BW

    Hi
    I have a problem with product hierarchy in BW. First, i extract master data for material (0Material, infoobject), but attribute 0PROD_HIER was not update, all records has this value in blank. After that, i extracted hierarchy from R/3, with datasource 0MATERIAL_LPRH_HIER, and hierarchy was activated in BW without problems. Now my problem is how to insert the material en hiearchy, as i have it in R/3, i think that it should be when i extract the hierarchy, but it not happened. So how can i insert the whole material in their node as they are in R/3??
    Thanks a lot...regards

    Have a look at this:
    Prod Hierarchy - how to
    Regards

  • How to lod Hierarchy from one info object to anothe info object

    Dear Friends,
    I am facing one problem with the loading of hierarchy from one object to another.
    Please find my scenario below.
    We are having 0material with hierarchy.This hierarchy is loading from R/3.We have to load this hierarchy to anothe object by replacing the nodes.So can you guys please suggest how to achieve this.Please let me know if you people are required additional information.
    Thanks in advance.
    Regards
    Madhu

    Hi Madhu,
    By default, you cant use a transformation to load data into the Hierarchy Master data.
    I havent tried it myself, but for you to explore, I'll suggest the below idea.
    Write an ABAP program to download the hierarchy table data from 0material into a flat file.
    Create flat file datasource to upload hierarchy to the other infoobject.
    Put both of them in a process chain and execute one after another.
    Hope this helps. Pls let us know.
    Regards,
    Bijesh

  • Extract hierarchy from a flat file

    Hello,
    I’m trying to extract hierarchy from a flat file.
    The hierarchy is built from 3 different infoObjects each infoObject represent different level in the hierarchy. I built the hierarchy in the last level of the hierarchy and put all the levels as external chars in the hierarchy.
    (I used the blog: Hierarchy Upload from Flat files: /people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files )
    When I extract the data into the PSA it looks fine but when I choose to  update the PSA data into the infoObject  the request stays yellow. Three is no dump and I cant find the job in SM50.
    Please Advice,
    David

    Hi David,
    Thats the problem with using PSA for flatfile hierarchy loads. If you can change the transfer method to "IDOC" then change and retry the load. The IDoc method gives you an advantrage when dealing with flatfiles as you can debug and notice which record # has errors.
    Bye
    Dinesh

  • Activation of InfoObject 0CRM_SOLDTO from BC

    hi,
    i have a problem. I have activated (data flow downward)  the InfoObject 0CRM_SOLDTO from the Business Content. While the Activation, it occurs a error  " Mapping of 0BP_UNAME_ORGUNIT_ATTR HRECLNT500 0BPARTNER is inkonsistent".
    Do anyone know, how i can solve this problem.. Its only this problem.
    I use SAP BI 7.0
    thanx
    sunny

    Hi,
    thanx for the answer ...  now i have activted the 0CRM_SOLDTO.
    I have deleted the aktive transferstrukture. Then i have activated 0CRM_SOLDTO again. it works..
    but in BC there are many DataSources, Routines, InfoSources..( 0CRM_SOLDTO - dataflow downward.), and they are all activated too.
    But if search in RSA1, i see the 0CRM_SOLDTO Object without the ETL Prozess concerning to this Object.
    What is the problem??
    I must see the complete dataflow to the hierarchie, attributes and texts. is it?
    thanx

  • I have a ipod touch 8gb when i plug it in to charge it just blinks from the apple screen to the battery screen but will not charge what could be wrong it was fine yesterday?

    I have a ipod touch 8gb . When I plug it in to charge it just blinks from the apple screen to the battery screen what could be wrong?

    Maybe:
    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar
    or
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Memory expansion on Satellite 2410

    Hi I am planning to expand the memory of my Satellite 2410-601. It has 256 MB DDR at present. I am planning on using one more 256 memory module to expand the total memory to 512 MB. What I would like to know is whether I can use any of the DDR memory

  • Accessing web application JAR files from applet

    I've got an applet which is part of a web application. All the web application JARs are in the webapps/myappl/WEB-INF/lib directory, and I can't seem to place anything in that directory on the archive attribute of <OBJECT> tag. I'm running into troub

  • Delete obsolete

    please tell me about this error when i delete obsolete i have this error 1.error allocating device, device type: SBT_TAPE, device name: 2.Failed to load Media Management Library altho my retention policy is 1 its cant delete this obsolete thank you

  • I do i tell what firfox im running ex(3.0 or th 3.5/3.6) and also should i upgrade if i dont have the higher one?

    not sure which firefox im running 3.0 or 3.5/3.6. how do i tell and should i upload the the higher ones?

  • Sap not following its own rules

    i made a vendor recon account and assigned a sort key 010 to it. then i created a vendor master record and in that also i gave sort key as 010.   now i made a po then grn then miro. as a result of simulation in miro i got an entry vendor recon accoun