Problem closing an ActiveX created with the bridge and used in a scada.

Hi all,
I cretaed an ActiveX (using the bridge) to be used in a scada software. I inserted the activex in a panel and it opens and work properly when the panel is open. The problem is that when I close the panel, the scada doesnt free the memory. Is it supposed to do free it or is it my bussines? Should or can I do it by calling any method, function? Any suggestion?
Thanks!
Bobby

I guess that on exit scada does not release resources. Try the tool at
http://www.simtel.net/product.php[id]60701[sekid]0[SiteID]simtel.net

Similar Messages

  • I just purchased an extreme.  I have an express.  The sales guy recommended setting up a hot spot with the express and use the extreme as a base station.  What does he mean and how do I do this?  What are the advantages?

    I just purchased an extreme.  I have an express.  The sales guy recommended setting up a hot spot with the express and use the extreme as a base station.  What does he mean and how do I do this?  What are the advantages?  How do I set this up?????

    I think he means to set up the main extreme as the main router or "main base station", and then use the express to "extend" the network.
    You can look up the manual for your express here for more details:
    http://support.apple.com/manuals/
    Extend the range of your network by adding AirPort Express to your existing AirPortExtreme or AirPort Express wireless network (this is called a Wireless DistributionSystem, or WDS). "
    Extending the Range of an Existing AirPort Extreme or
    AirPort Express Network
    You can extend the range of an existing AirPort Extreme or AirPort Express wirelessnetwork by setting it up in a WDS. Wireless computers can connect to the network andshare the Internet connection, share files, and play network games. If you connect yourAirPort Express to your home stereo, computers on your wireless network can useAirTunes to play music on the stereo from iTunes. If you connect a USB printer to yourAirPort Express, all of the computers on the network can print to it.
    n Open the AirPort Setup Assistant on a Macintosh, or the AirPort Express Assistant on acomputer using Windows XP. Follow the onscreen instructions to extend the range ofyour AirPort Extreme or AirPort Express network.
    Note: Extending the range of a network using WDS may reduce overall networkperformance.

  • I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights fl

    I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices> 
    When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
    Lamont

    I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices> 
    When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
    Lamont

  • How do i save a calender i have created with the photo and the dates saved on separate pages?

    how do i save a calender i have created in photoshop with the photo and the dates saved as two separate pages?  when i save as pdf or jpeg they are authomatically saving 1 pg with the photo and dates on one page.  This is causing problems when i print.

    Hi there, in case your printer cannot print very large, you can also crop down two versions and print them as separate documents.
    1) Create a guide where you would like to split the pages by clicking on the ruler (hit command R if they are not showing) and dragging to the desired area.
    Creating the guide will make it so you can be precise in the way you split up your page, and so that no part of the image will be repeated or lost.
    2) Select the Crop Tool and fit the crop area to the top half of your calendar, using the guide you've just made to snap to the right spot. Hit return to finalize the crop.
    3) Go to File > Save As. Name the file something like calendar_top and select the desired file format. Hit "Save."
    4) Once you get back to your calendar file, Go to the History panel and select "Drag Guide." This will take you back to the step before you cropped the image.
    5) Repeat the steps as before for the bottom half of the calendar, once again using the guide to help you make your crop area.
    So then you would just print each of the two pages individually. The images will not be contained within one document, but if you have Acrobat you could combine the files.
    I hope this helps!

  • Trial version problem with the wrie Create with the trial version

    help me
    trial version problem with the write Create with the trial version
    i wanna delete the Create with the trail version

    Publication on businCata I am sorry I do not understand your inquiry.  Can you please restate your question?  What Adobe software or service is your inquiry in relation too?

  • I created a spreadsheet on my mac with numbers, and now it tells me  I have to buy a newer version of numbers to access the spreadsheet I created with the old program.  if I wanted problems like that I would go back to using windows

    I created a spreadsheet on my mac with numbers, and now it tells me  I have to buy a newer version of numbers to access the spreadsheet I created with the old program.  if I wanted problems like that I would go back to using windows

    Hi sar23,
    You may have inadvertently created or edited the document in the new Numbers 3.0 (which is free; you don't have to buy it) and are now trying to open it with the old Numbers 2.3.
    Both versions can be on your Mac at the same time, and can run at the same time.  The icons are similar so it's easy to confuse them (old on top here, new on bottom).
    The new Numbers 3.0 is in your Applications folder. The old Numbers 2.3 should be in a subfolder in the Applications folder named iWork '09 or similar.
    If you accidently edited an old document in the new version and want to take to take it back to the old version, you can export it:
    SG

  • Problem with the MenuBar and how can i delete a own component out of the storage

    Hello,
    I opened this thread in the category "Flex Builder 2", but
    under this category my questions fit better.
    I have a problem with the MenuBar and a question to delete a
    component out of storage.
    1. We have implemented the MenuBar, which was filled
    dynamically with XML data.
    Sporadically it will appear following fault, if we "mousover"
    the root layer.
    RangeError: Error #2006: Der angegebene Index liegt
    außerhalb des zulässigen Bereichs.
    at flash.display::DisplayObjectContainer/addChildAt()
    at mx.managers::SystemManager/
    http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
    at mx.managers::SystemManager/addChild()
    at mx.managers::PopUpManager$/addPopUp()
    at mx.controls::Menu/show()
    at mx.controls::MenuBar/::showMenu()
    at mx.controls::MenuBar/::mouseOverHandler()
    Here a abrid ged version of our XML to create the MenuBar:
    <Menuebar>
    <menu label="Artikel">
    <menu label="Artikel anlegen" data="new_article" />
    <menu label="Artikel bearbeiten" data="edit_article" />
    <menu label="Verpackung">
    <menu label="Verpackung anlegen" data="new_package" />
    <menu label="Verpackung bearbeiten" data="edit_package"
    />
    </menu>
    <menu label="Materialgruppe">
    <menu label="Materialgruppe anlegen"
    data="new_materialgroup" />
    <menu label="Materialgruppe bearbeiten"
    data="edit_materialgroup" />
    </menu>
    </menu>
    </Menuebar>
    It is a well-formed XML.
    2. Delete a component out of storage
    We have some own components (basically forms), which will be
    created and shown by an construct e.g.
    var myComponent : T_Component = new T_Component ;
    this.addChild(myComponent)
    Some of our forms will be created in an popup. On every call
    of the popup, we lost 5 mb or more, all childs on the windows will
    be removed by formname.removeAllChild();
    What cann we do, that the garbage collector will dispose this
    objects.
    Is there a way to show all objects with references (NOT
    NULL)?
    I have read in the Flex Help, that
    this.removeChild(myComponent) not delete the form and/or object out
    of the storage.
    Rather the object must be destroyed.
    It is sufficient to call delete(myComponent) about remove
    this object out of the storage as the case may be that the
    garbage-collector remove this object at any time?
    Or how can I destroy a component correctly. What happens with
    the widgets on this component e.g. input fields or datagrids?
    Are they also being deleted?
    Thanks for your help.
    Matze

    If you mena the "photo Library" then you cannot delete it.
    This is how iphone handles photos.  There are not two copies.  There a re simply two places from which to access the same photos.  ALL photos synced to iphone can be accessed via Photo Library.  Those same pics can be accessed via their individual folder.

  • HT2513 my iCal calendar that I created with the color green keeps changing to purple.  no matter how many times I change it to green, it turns it back to purple.  Of course this only happens with iCloud and not "from my Mac".  Any ideas?

    my iCal calendar that I created with the color green keeps changing to purple.  no matter how many times I change it to green, it turns it back to purple.  Of course this only happens with iCloud and not "from my Mac".  Any ideas on how to correct this?  This seems like a trivial error, but it's super annoying.

    I called Apple and they said that they know about this problem.  It's a problem with iCloud which their Engineers know about.  (there was a new iCloud release, hence...)  No ETA for a fix yet.  I asked that this be escalated so Engineering doesn't put it at the bottom of their fix list.  I talked to a Senior Advisor and mentioned to them to have QA check their regression tests as this has happened before to me (the problem just didn't take this long to resolve).  I like to use green too for important stuff, so I've resorted to creating a new calendar using the normal calendar green for events going forward.  They could have picked another color besides green to have this problem with and I wouldn't have been so upset.  ;-)

  • Issues with the SQL wrapper scripts created with the DB adapter

    Hi All,
    We have the wrapper sql scripts created with the DB adapter configurations which are being used to invoke the stored procedures.
    To give you a background on the wrapper sql scripts-The Adapter Configuration wizard generates a wrapper API when a PL/SQL API has arguments of data types, such as PL/SQL Boolean, PL/SQL Table, or PL/SQL Record.
    These two SQL files are saved in the same directory where the WSDL and XSD files are stored, and are available in the Project view.
    The issue we are facing now is that whenever the associated package or the procedure structure undergoes a change we see an error as given below:
    An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/Application1_ABC_ESB/DBADP_Update_Out.wsdl [ DBADP_Update_Out_ptt::DBADP_Update_Out(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'DBADP_Update_Out' failed due to: Error while trying to prepare and execute an API. An error occurred while preparing and executing the APPS.XXIRIS_SOA_R_WRAPPER.XXIRIS_AR_CUST_K$ API. Cause: java.sql.SQLException: ORA-04068: existing state of packages has been discarded ORA-04061: existing state of package body "APPS.XXIRIS_AR_CUST_K" has been invalidated ORA-04065: not executed, altered or dropped package body "APPS.XXIRIS_AR_CUST_K" ORA-06508: PL/SQL: could not find program unit being called: "APPS.XXIRIS_AR_CUST_K" ORA-06512: at "APPS.XXIRIS_SOA_R_WRAPPER", line 1 ORA-06512: at line 1 [Caused by: ORA-04068: existing state of packages has been discarded ORA-04061: existing state of package body
    In such cases we need to either execute the wrapper scripts again or refresh the connection pool in case the wrapper sql scripts for that procedure are not available.
    In some cases we see that the first instance errors out.However the second request and the subsequent requests after that goes through successfully.
    Please do let me know if anyone has faced such issues before.
    Any inputs in this regard would be of great help.
    Thanks in advance!
    Deepthi                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    I stumbled on a link in the oracle forum which says that the "create or replace package XXX" at the start of the PL/SQL procedure when run seems to intermittently cause the ORA-04068: existing state of packages has been discarded problem.
    As per the solution suggested an “alter package XXX compile" can be executed after the changes are made and then we would no longer get the error in BPEL/ESB and dont have to bounce the server too.
    __http://forums.oracle.com/forums/thread.jspa?threadID=185762_
    However the above solution does not seem to resolve the issue.
    Any help in this regard would be highly appreciated.
    Thanks,
    Deepthi

  • What is the user scope when created with the API?

    I noticed that users created with the Adobe Connect API for my meeting/account are always listed in the Administration -> Users and Groups area.  Which probably means that a user's login is only valid for my meetings.  So if they wanted to register or join a meeting controlled by someone else, they would have to re-register or be re-created by that admin.  Is this correct?
    I'm trying to confirm this so that I know how to register a user on my website.  It would be ideal if my website would register the user and also log the user in without the user having to enter a separate password (my website would generate and store the password).  If the API creates a user only for my meetings then this is not a problem.  The user will just always have to go through my website to get to the meeting.  However, if the user created by my Adobe API account can be used to access/register in another person's meetings on Adobe then this approach is not so good because the user would need to know their password.

    yea, guest registration is not an option as I need to restrict access to the meeting.
    My main concern is that another Connect account holder can change the user's password.  If this ever happens, my website would have an old password and would be broken because it wouldn't be able to log the user into their meeting.  This may be a rare case, but the website will be charging for these meetings/webinars.  If the user can't get in at the time of the meeting....  i'll have a lot more problems.
    I guess I'll just need to provide a way for the user to change or enter their own password. 
    Thanks for the info!

  • Problem in aligning dynamic UI with the static UI

    Hi All,
    I have problem in aligning dynamic UI with the static UI, I am using Matrix layout.
    Static fields are spread over 2 colums and 3 rows:
    lableA SPACE input field SPACESPACE lable B SPACE input field
    lableC SPACE dropdown SPACESPACElableD SPACE dropdown
    lableE SPACE dropdown SPACESPACElableF SPACE dropdown
    Now when a value is selected in C, than E becomes visible, and depending on the values selected in E, there are dynamic UI generated, i.e dynamic lables and depending on some validation it will be either a dropdowns or input fiels or both.
    at run time screen is like this:
    lableA SPACE input field SPACESPACE lable B SPACE input field
    lableC SPACE dropdown SPACESPACElableD SPACE dropdown
    lableE SPACE dropdown SPACESPACElableF SPACE dropdown
    dynaSPACEdropdown
    dynbSPACEinput field
    if I change my selection in E than layout looks like:
    lableA SPACE input field SPACESPACE lable B SPACE input field
    lableC SPACE dropdown SPACESPACElableD SPACE dropdown
    lableE SPACE dropdown SPACESPACElableF SPACE dropdown
    dynaSPACESPACEdropdown
    dynbSPACESPACEinput field
    Requirment: I need all the lables as well as dropdown/ input fiels in line with the static fields irrespective of my selection in E.
    Something like this:
    lableA SPACE input field SPACESPACE lable B SPACE input field
    lableC SPACE dropdown SPACESPACElableD SPACE dropdown
    lableE SPACE dropdown SPACESPACElableF SPACE dropdown
    dyna   SPACEdropdown
    dynbSPACESinput field
    dyncSPACESdropdown
    All this elements are in a group and that group has 2 transparent containers, 1 for static and for holding dynamic UI.
    I tried playing with the container properties, and also tried fixing width of dynamic UI but still the alignment issue is encountered.
    Can U guys plz give in ur valuable inputs as i need to fix this urgently.
    Regards,
    JJ

    Hi Armin,
    Can you please elaborate your solution ?, I do not have an idea of InvisibleElement & IWDView.resetView() ,
    If you can give me the exact pointer than it would be great and a good learning exp. for me.
    Thanks for the action assignment part, it worked.
    if (wdContext.nodeMaterialClass().size() > 0 && wdContext.currentContextElement().getActionMatCls()) {
         if (wdContext.currentMaterialClassElement().getMaterialClass_Description() != null || !wdContext.currentMaterialClassElement ().getMaterialClass_Description().equalsIgnoreCase(" ")) {
               IWDGroup Searchgroup = (IWDGroup) view.getElement("DynGroup");
    Searchgroup.destroyAllChildren();
    view.getContext().reset(false);
                                                      for (int i = 0; i < wdContext.nodeMaterialCharateristcs().size(); i++) {
                                  //this for label
         IWDLabel CharLabel = (IWDLabel) view.createElement(IWDLabel.class, "label" + i);
         CharLabel.setText(wdContext.nodeMaterialCharateristcs().getMaterialCharateristcsElementAt(i).getDescr_Char());
         CharLabel.setDesign(WDLabelDesign.EMPHASIZED);
         CharLabel.createLayoutData(MatrixHeadData.class);                              CharLabel.setWidth("154px");                              Searchgroup.addChild(CharLabel);
                 further there are conditions to create either dropdown or input field
    Can you please point where and how to apply your solution.
    Regards,
    JJ

  • Verify that the database is created with the correct path  specification

    Dear All
    When I installed DB2 9.1 with SP4 on windows 2003 64 bit,I use Configuration Assistant tool which is problem
    SQL1031N  The database directory cannot be found on the indicated file system.  SQLSTATE=58031
    Explanation:
    The system database directory or local database directory could
    not be found.  A database has not been created or it was not
    cataloged correctly. 
    The command cannot be processed. 
    User Response:
    Verify that the database is created with the correct path
    specification.  The Catalog Database command has a path parameter
    which specifies the directory where the database resides. 
    sqlcode :  -1031
    sqlstate :  58031
    Thanks

    Hi Phuc,
    Could you please validate, that the database TST is located in driver H: ?
    If the database is there, you find a directory with the name of your instance under the H: drive, inside this directory, you must find a NODE0000 directory and finally inside the NODE0000 directory there must be a SQL0000? directory, where ? is a number.
    You get your instance name from the environment variable DB2INSTANCE or simply by the execution of:
    db2 get instance
    If there is no SQL0000? directory at all, this means the database is located somewhere else.
    If there is SQL0000? directory in that drive, you can perform the following:
    db2 CATALOG DB TST AS TST ON H:
    And provide the error message, if any.
    Hope this helps
    Best regards, Edgardo

  • Error: There is a problem with the file and it cannot be copied

    I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
    There is a problem with the file and it cannot be copied.
    I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
    Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

    That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
    ioErr = -36, /*I/O error (bummers)*/
    If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
    Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
    If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
    = Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
    = Recover what files you can and write the rest off as gone.
    = Send your drive to a data recovery service and hope they can extract more than you can.
    Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
    If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

  • After a library has been created with the "Copy items to the iPhoto library" option unselected, can it later be made to create those copies?

    iPhoto 9.4.3
    iPhoto Library Manager 3.6.8
    MacBook Pro - OS X 10.7.5.
    I have a large number of iPhoto libraries, organized with iPhoto Library Manager, that I created with the "Copy items to the iPhoto library" option unselected because I wanted easier access to the individual files. I am now going to be migrating to a new computer and have run into some problems with iPhoto losing the path to the file, and as a result showing me the exclamation point of doom. What's more, the program doesn't seem very intelligent about rebuilding those lost connections, and I have to go back through and correct it manually almost one at a time. How do I get around this problem?
    If I rebuild my new computer from a Time Machine backup (I usually enjoy taking this opportunity to start from a clean slate, but...), will the paths all be preserved without me needing to abandon my organization system?
    Or is there some way to ask iPhoto or Library Manager to create and organize copies of all the photos in the library that are not currently present within the library?
    On a tangentially related note, what's the best way to save keywords (and ideally also faces) added in iPhoto to the photos' meta data?
    Much obliged.

    Not with iPhoto by itself.  If you have the lastest version of Aperture and iPhoto referenced libraries can be converted to managed with Aperture.
    You can convert to a managed library with  iPhoto Library Manager by rebuilding the library with iPLM.  This will create a new, managed library with all your photos in it and with all Events, albums, keywords, titles, descriptions and places intact. However, books, calendars, slideshows and cards will not be retained.  They will end up as albums containing the photos.
    OT

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Maybe you are looking for

  • P55 CD-53 Memory mixing supported

    Is it possible to mix 2 different speed DDR3 kits ? Somthing like this: DIMM1 & 3: 1333 MHz 9-9-9-24 DIMM2 & 4: 1066MHz 7-7-7-20

  • Mozillla will no longer connect to the internet. Chrome and IE connect fine.

    Everytime I open Mozilla it says I can't connect to the internet, but other browsers load it fine. I like Mozilla, but if this is going to be an ongoing issue, I'd rather not use it anymore.

  • Tuxedo JCA Adapter Configuraton

    Hello, I'm trying to configure Tuxedo JCA Adapter and have got troubles with making bdmconfig.xml file. First, my enviroments are that Tuxedo 11gR1 and WAS 7 are installed on separate machines. And sample Tuxedo service is bankapp service using oracl

  • Missing images in embedded RSS Feed

    I am using iweb for my wife's site. She has been and is more comfortable using Blogger for her Blog. I embedded her RSS feed inside her site, but not all the images that she posts on Blogger are showing up. I have her RSS feed going through Feedburne

  • 848P NEO-LS SATA (Native Mode) - Cant Install WinXP

    Okay guys - I have a 848P Neo-LS which seems to be somewhat rare on this site in the support sections. Its a brand new board and looks very fancy. I have a lot of experience with PC's as I repair them on a daily basis however this is my first adventu