PROBLEM CONNECTING MY BEFW11S4 TO THE INTERNET

OK FIRST OFF I GET IT USED OFF EBAY the guy said it came from his job.BUT OTHER THAN THAT.I CONNECTED THE 2 ETHERNET Cables one from the modem to the router and the other from the router port 1 to my laptop.i keep getting the router cannot connect to the internet message.i have bellsouth dsl service.i went in to reset the router but everytime i put my username and password for my dsl after its successfully reset the password i notice is longer than the one i use for my internet provider.can anyone tell me how to keep this from happening

here are some things to try, first make sure to reset the router, hold the reset button for 30 sec, the lights should blink, let them finish then continue, make sure to disconnect the modem from the router but keep it hardwired to the laptop, open a web page, and hit escape( you wont be able to do anything because there is no internet  connection) hit ctrl+o and type 192.168.1.1, a security pop up screen will show up, type admin as password, hit enter, you will now be at the router setup page, change the ip address of the router to 192.168.2.1 and save settings, after the save is complete you can connect the modem back into the router and should be able to connect to the internet, if this works, you will need to use 192.168.2.1 to enter the router setup page to make any other changes ( such as wireless, security or firmware upgrades) if this does not work for you, reset the router and try this http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=2210&p_created=11109...
hope this helps
Felipe Diaz
using WRT600n

Similar Messages

  • How do I connect my Centro to the Internet via bluetooth over PC's Internet? Where is Centro's PPP Connection Type? How do I setup Login Script for bluetooth connection?

    I am trying to set up bluetooth on the Centro to connect to the internet via my PC's internet.
    HotSync over bluetooth works successfully.
    Computer specs: Toshiba P205-S6277; Bluetooth Stack v5.10.04 (currently using); Bluetooth Monitor v3.01 (to use Vista's built-in bluetooth)
    I think I have narrowed my problem down to 3 things.
    (1) Finding Network Access properties (to allow connected devices to access the internet)
    (2) Finding Centro's Network Connection Type: PPP
    (3) Finding the correct Login Script to use
    for (1) I think I've looked everywhere; found nothing on Network Access. 
    Checked control panel: only Bluetooth Local COM
    Right-clicked bluetooth icon > Settings: File transfer, PAN Networking, PAN DHCP server, AV controls. Other bluetooth settings are for file transfer or object push. I don't see anything like this.
    I'm stumped on (2). It seems as if palm removed this option under Centro's Advanced network settings .
    Nearly all the forums that I read says to choose Connection Type: PPP.
    (3) Found 2 scripts that seemed would work. I don't know how it exactly works but it sounds workable.
    First script:
    Send: CLIENT
    Send: CLIENT
    Wait for: CLIENTSERVER
    End:
    Script 1 Connect Log:
    =======================================
    Connect Log
    S: client
    S: client
    R:
    Err: 0x121F   <<<netErrUserCancel b/c I canceled it. 
    Not connected
    ========================================
    I canceled it because the process would stay on "Signing In" then it automatically "Canceled" itself.
    Second script:
    Send CR:
    Delay: 1
    Send: CLIENT
    Wait For: CLIENTSERVER
    End
    **UPDATE** I found on this forum (Reply # 3689) that the script is needed only if you are using Palm OS 4 or under. Centro uses Palm OS 5.49121. Can anyone support this?
    Even without the script it has problems "Signing In".
    I'm currently reading this site and trying out its decribed methods. I will update this thread when I get the results.
    I'm using the Centro. And If anyone's been able to successfully connect to the internet on the Centro via a bluetooth connection to the PC WITHOUT 3rd party applications, please share.  If not, please share any ideas.
    Thanks!
    -Eric
    Post relates to: Centro (AT&T)
    Message Edited by naisanza on 01-01-2009 02:26 PM

    I've been going at this for days, and have probably exhausted all the proposed solutions on the first 3 pages of various google searches. I'm getting the feeling that Vista users are pretty much SOL for the time being.
    For the record, I just tried out a few of the solutions (mRouter & SoftickPPP) on XP and they work perfectly.
    Post relates to: Centro (Verizon)
    Message Edited by Cogwheel on 02-13-2009 09:45 AM

  • Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering.  It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem.  It's not the internet speed as checked that.

    Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering.  It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem.  It's not the internet speed as checked that.  I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
    I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house.  For some reason the range is low and speed veru disappointing.
    I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed.  Please HELP!

    No silver bullet........but my suggestions may drive you in the right direction.
    1.  Unplug the power cable from the TC and wait 10-15 minutes before powering back up.   Seriously wait!
          Proceed to #2 if this dosen't help.
    2.  Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem. 
    2a.  Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch)  wait for all the modem lights to come on EXCEPT activity.
    2b.  Connect ethernet from modem to TC, and plug in the power cable to TC.
          Proceed to #3 if this dosen't help.
    3.  Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
    All really simple to do....if you need additional help let me (us) know.

  • My iPod 5th gen connects to wifi but the internet doesn't work.

    So we were watching netflix on the ps4 and something happened and now my ipod will connect to the wifi but the internet doesn't work. everything else connects just fine to the internet just not my ipod. I've renew my lease, reset my settings and network, forgot my network and rejoined,  turn my ipod completely off and back on, turned my wifi off then back open. The IP address is 192.xxx.x.xx
    its the ipod 5th generation 16gb.  With the latest update

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • WiFi Connection does not see the internet

    I have this problem with my Inc2 and my home wifi.   I have a Linksys/Cisco E1000 router supplying my wireless and wired networking at home; it is a standard set up with a WPA Personal2 shared key authentication.    I set my Inc2 to connect with the home network, and it reports it is connecting, getting an IP address and connected messages in sequence.  If I look on the router itself, it reports the mac addres of the phone as being connected.  But any attempt by the phone to get to the world goes nowhere.  Now I do not have any problems connecting other devices:  laptops, tvs, dvd players all connect and get to the internet.  The router supplies the DNS settings, and I presume the phone is setting the router as the gateway (router IP is 192.168.1.1, surprise).  but the phone just returns site not available.  (Even for the Google page).  Other apps have reported site not available messages when they try to run with wifi at home is connected. 
    Now I have had success at open sites (eg. Wendy's, Panera Bread,  that sort of place) connecting and getting access to the world.  But I have not way to find out what the settings of the phone are when it 'connects' to my wifi to try to find out what the problem is. 
    Can anyone give me a clue how to find out what piece is broken here?  It is only my android phone that connects in this 'half-baked' way...like I said, everything else ( 3 laptops, a tv, a dvd player, an Xbox) all connect fine.
    :-Dennis

    I have the same problem and I have a router  Verizon sent me. I have to turn off wifi every time I want to log on to the internet at home and on the job. that means I'm using up my data when I have free wifi 

  • How to connect my Blackberry to the internet

    I am on a giffgaff monthly plan with unlimited internet, but i cannot connect my BlackBery to the internet. Everytime i click the browser icon it just says 'connection failed' - my friend said you needed a special code or something and i have no idea where you get that.

    Hi dizzytomboy56
    You will have to contact your wireless provider to ensure you have a BlackBerry data plan, which is different than a standard data plan.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Error message: There was a problem connecting to MobilMe. The request timed out.

    I've never had an account with MobilMe.  MobilMe is not listed as an account in iPhoto.  All software on iMac is up to date.  I'm running OSX 10.6.8.  While working in iPhoto, editing or trying to upload photos to FaceBook from iPhoto I get the error message: There was a problem connecting to MobileMe.  The request has timed out.
    For some reason iPhoto wants to communicate with MobilMe, even though I've never had an account.
    I worked with ExpressLane (case # 231899367) thinking it was a MobilMe issue).  It was a dead end.  Any suggestions to remedy this annoyance would be appreciated. Thanks.  ILIJA.

    Strange, I got this error for the first time last night.  I have a 27" iMac (late 2010 model); with latest Aperture.  I recently added a Flickr account (have had a Facebook account on there for some time).  I was uploading some to my flickr account, and noticed that even though the "use actual size" setting was used, it was uploading tiny thumbnails and not the full version. 
    It was after this, that I got that error.  I haven't tried it again, as I'm now on my macbook at work.  Will try again tonight.
    I've also, NEVER had a .mac account, so no possibility of it being a legacy account.

  • I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

    I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however  if I use my laptop in  the same physical locationand using similar procedures I am able to conect.?

    What router are you using? make/model/version
    What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
    If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

  • I can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?

    i can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?

    When I go to connect my MBP, it says I have the wrong user name and/or password; however the names and password are the same on both computers.
    The MBP connects smoothly to the internet, just not the TC.
    Does this help?
    There is no login name required to get internet unless you are running a vpn or pppoe client.
    The wireless uses a security key.. but that is fixed in the wireless setup.. so no user login should be required at any time.
    It sounds to me like you have the wrong setup.
    Please do a screen shot and post it of the imac setup that works.. show us the airport network with its ip address and where you are putting in the login.
    Please also do a snapshot of the TC and how it is setup.
    What broadband do you have?
    Is the TC a router or bridged?

  • Using iPhone to connect my MacBook to the internet.

    Any ideas on how I can use my iPhone to connect my MacBook to the internet?

    Hi RonAnnArbor,
    Why not just tell people the truth and let them be responsible for their own actions. You cannot seriously expect us to believe that you are this ridiculously naive. Let's suppose that you are in a geographic/physical location that does not have free, or pay WiFi. But, to get the customer up and running you need a real machine with real apps to do some work. This, opposed to just playing on the net with the iPhone. Real work, not reading emails and showing your technically challenged friend how your blog looks on the phone... Instead of that, you are looking at stuff that is technical, contains a great deal of information, or contains a great deal of formatting. Could you not see that it would be easier to work with this type information not just from a readability standpoint, but a usability standpoint on something with a larger display?
    I digress. Anyway there is no way to connect your MacBook Pro to the net because there is no connection available and you are in the middle of no where, but your iPhone is in your holster and has a freakin' marvelously strong signal. So, you have this iPhone in your pocket right next to your xxxx and it is doing nothing but playing your favorite music.
    Hmm, interesting "You have an Unlimited Data Plan with AT&T" why not use it to create your own WiFi hotspot with your iPhone and allow your MacBook Pro, Windows PC, whatever to share the phone's data connection so that these and other devices can connect to the net via the iPhone? So you still don't see the advantage?
    That is an awesome feature and makes it so you can connect with anything, anywhere using your iPhone. Talk about a new marketing angle. Your iPhone is now your ISP. The iPhone would be acting as, well, a modem if that helps you bring the aforementioned post full circle.
    <post edited by moderator>
    Hope this helps and was not too strong.
    Allen

  • I currently use a mifi device to connect my laptops to the internet, can I use the iphone 5c as an internet access point for them

    Can the iphone 5c be used as a router to connect my laptop to the internet???

    Yes, but it depends on what plan you have.
    What plan name do you have as stated on your bill. If it says More Everything, the hotspot functionality is already included.

  • Im connected to wifi but the internet wont work?

    im connected to wifi but the internet wont work how do i make it work

    Go to settings, then wifi. There, you can choose a wifi router and if needed, enter the password. You haven't provided any details in your post. Are you trying to connect to a home network?  A commercial network? 

  • My hotspot won't connect my computer to the internet since I upgraded my phone to ios7. The PC sees the hotspot but won't connect. The op sys on the PC is windows 7 ultimate. Can anyone help?

    My hotspot won't connect my PC to the internet since I upgraded the op sys on the 4s iphone. The PC sees that hotspot but won't connect. The op sys on the PC is windows 7 ultimate. Can anyone tell me what to do please?

    Glad to hear it is all straightened out. You are right about the upgrade cost. That is one reason why Adobe switched to monthly licensing—no more upgrade cost <g, r, & d>. Of course we do have nearly monthly product upgrades. It is almost like playing whack a mole.

  • HT201415 actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device pr

    actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?

    Hafizur Rahman wrote:
    when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?
    Problem? I'm not even sure what your problem is, much less whether it's a problem with the phone or the carrier.

  • I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available

    I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available it included HDR & Panoramic photo merge. I cant find these. Where do I find them.

    well that was a big waste of my time & data allowance then ...
    I live in a flaky slow internet area & I keep my photo edit machine off the internet unless & want to update something. CC is no use to me & that useless update just used up a 12th of my allowance for the year ...

Maybe you are looking for

  • Workspace Issue Using Oracle Application Server

    Dear All, I've configured my Workspace using Oracle Application Server and now I can login to my workspace through this url http://<servername>:7777/workspace/. But somehow, at my workspace home, I cannot find the folder or Explore inside, which is t

  • Problem deploying simple WS

    I'm trying to create a simple Web Service and get a problem at deployment stage. Firstly I create a simple Java class in the Java perspective. public class HelloNige {      public String hello (String name) {           return "Hello " + name; I then

  • Hierarchy not visible in Query designer

    Hello Experts. I am trying to create a query in BW 3.5 but I ran into one issue. I created a hierarchy for an Infoobject. But I am not able see this Hierarchy for the Infoobject in BW 3.5 Query designer although I can see it in BI 7.0 Query designer.

  • I can´t see aspx archivies in safari

    i can´t see aspx archivies in safari

  • I cant open final cut pro x help!!!!!

    i try to open but appears that Process:         Final Cut Pro [572] Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro Identifier:      com.apple.FinalCut Version:         10.0.8 (221398) Build Info:      ProEditor-22139008