Problem connecting to WD Netcenter HDD with Mac

Hi there!
It is quite funny...with my PC (WinXP) I can connect to the WD Netcenter HDD (10.0.1.6 reserved IP)...with my MBP it is not possible!
Hardware:
MBP C2D 2.33 over WLAN
AEn
AMD64 WinXP over LAN
What must I do to get my Mac connected to the WD Netcenter HDD?
Regards
Stefan

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Similar Messages

How can I migrate an Aperture library from an external HDD with Mac OS Extended (Journaled, Encrypted) format?

How can I migrate an Aperture library from an external HDD with Mac OS Extended (Journaled, Encrypted) format?
I used to store my pictures on an external hard drive using the latest version of Aperture. Now I tried migrating my Aperture library to Photos. However, after a short moment an error message popped up telling me that "Photos was unable to make a copy of your library before preparing it. Photos does not have the necessary permissions...".
My external HDD doesn't need any permission repairs nor is the system prohibited to read from or write to it.
Thanks for any advice in advance!
Gohtac

My guess is that the encryption is the problem for the new app.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Whenever I connect iPhone 3GS to sync with Mac sync fails to open

Whenever I connect iPhone 3GS to sync with Mac sync fails to open. Brand new are there any upates I am unaware of?

"sync" fails to open? Do you mean, iTunes?
If you manually open iTunes, does your iPhone show up in the left column?
If so...
Click on your iPhone in the left column of iTunes.
Click on the "Summary" tab in the right colum of iTunes.
Scroll down to "Options"
Select "Open iTunes when this iPhone is connected"
Apply
My apologies if I misunderstood the question.

Problems connecting an NEC AccuSync ASLCD223WXM with DVI

Hi all,
I have a PowerMac Dual G5 and just got a new monitor - an NEC AccuSync ASLCD223WXM. The monitor works fine over a VGA connection, but I wanted to try DVI so I got a Dell cable from a friend who wasn't using his. When I connect the NEC monitor to the Mac with the DVI cable, the monitor seems to switch between DVI and VGA inputs, looking for a source. The Mac desktop is visible for about a second, and then the monitor blacks out and appears to be trying to look at the VGA input (or it could just be going black). Then it switches back to the DVI input, displaying the desktop for about a second. The process repeats indefinitely.
The resolution is set at 1650x1050 at 60 Hz.
Anyone have any ideas? I'm wondering if I have a bad cable, or the wrong cable. There's DVI-D (which I think I have), DVI-M, DVI-A, etc... There's also single link and dual link. Not sure which I have. I've seen some info which says that the Radeon 9600 XT which is in my machine wants a DVD-D dual link cable, and the NEC monitor wants a DVI-D single link cable, but I don't trust the sources completely (and I don't know if that would cause this type of problem).
Thanks for any help,
Russ

Some more info in case it helps -
The Radeon 9600 XT in my Power Mac G5 appears to have a DVI-I port on the back. It has four extra pins around the flat contact. The NEC monitor appears to have a DVI-D port. It does not have pin inputs for the four extra pins around the flat contact. According to this (questionably creditable) webpage - http://www.pccables.com/cables/DVI_cables.html - a DVI-D to DVI-D cable is the right one to use in this situation.
Also, when I lowered the resolution down to 1280x800, the flashing went away. Raising the resolution caused it to come back. I found this webpage on Apple's site - http://docs.info.apple.com/article.html?artnum=301752 - which says this:
"The maximum resolution available when this display is connected to a single-link DVI port is 1280 x 800 - you must connect the display to a dual-link DVI port in order to access the higher resolutions available to the display."
Does this help diagnose the problem? Do I need a dual-link DVI-D cable? I called NEC and they said use a single-link DVI-D cable, but the person on the other end of the phone didn't sound technical so I'm inclined not to believe them.
Dual G5 Mac OS X (10.4.9)

Problem connecting Verizon router M1424WR to desktop Mac

I recently opted to purchase the $99 router that Verizon has been advertising but have been unsuccessful in establishing a connection. None of the LAN ethernet lights turn on when the ethernet cable is appropriately attached. I spent a good 90 minutes on the phone yesterday with a most conscientious Verizon support person, but we ultimately could not solve the problem. My son's Mac laptop, when connected to this router by ethernet cable, works just fine. The Verizon support person suspected that there is something related to the DHCP lease on the desktop Mac that is not resolved with the automatic setting. She also advised me that they are not trained on Mac, so there might not be any further resolution they could offer. I would be grateful for any insight out there!!

I'm not familiar with MACs but the following link may help.
http://support.apple.com/kb/HT1383

I am having problems connecting to my home wifi with my iphone4s

Over the past couple of weeks I have experienced a problem connecting to my home wifi service (Sky) with my iphone4s although my laptop connects fine. My phone also picks up the wifi at my place of work. At home when in close proximity to the router (netgear) on the phone the network name appears in the wifi settings but on the wifi networks page it does not get a tick against the name (wheel just keeps revolving). I have taken it back to the retailer (Vodaphone) and they recommend it be sent back to Apple (Liverpool or Manchester) as they consider it a hardware fault. I will be without the phone for probably 1-2 weeks and I use it within my working environment regularly.
Has any one any ideas?
jd
ps. If I go down the route of 'forget this Network' will I need to do any resets on the router as I cant find the username and password when I enter my IP address for the router.

are u there

Problem connection in OIM 9.1 with SAP user managment

Hi!
When I want to provision a sap user management resource to an user, it appeared this problem.
2008-07-30 14:50:52,587 INFO [XL_INTG.SAPUSERMANAGEMENT] Create User Request
2008-07-30 14:50:52,587 INFO [XL_INTG.SAPUSERMANAGEMENT] userId :PRUEBA4803, userGroup:AUDITOR_ARG,lastName:prueba4803,firstName:prueba4803,userTitle:0003,langComm:S,department:,langLogIn:,timeZone:,telephone:,extension:,Fax:,email:,dateFormat:1,decimalNotation:Y,function:,roomNo:,floor:,building:,code:,commType:,alias:,startMenu:000,userType:A,sapUserId:,empId:PRUEBA4803,fromHRMS:
2008-07-30 14:50:52,587 INFO [XL_INTG.SAPUSERMANAGEMENT] SAP Create Connection Request
2008-07-30 14:50:52,587 INFO [XL_INTG.SAPUSERMANAGEMENT] Inside XLSAPUTILITIES
2008-07-30 14:50:52,587 INFO [XL_INTG.SAPUSERMANAGEMENT] SAP Create Connection Requesting****
2008-07-30 14:50:52,587 INFO [XL_INTG.SAPUSERMANAGEMENT] START SAP Connection creation.
It is strange because it was working all right since 3 months ago and in these 2 last weeks, it is frequently this problem. Sometimes it works sometimes it does not.
Of course, I tried the connection between OIM and SAP, with the SAP login, and the connection is all OK.
My oim vertion is 9.1 and the SAP User Management connector is 9.0.4.1.
Did anybody have this problem before?
Bye!

Oh I forget, when I restart the application server, in my case the jboss, the problem is fixed. Strange...

I keep getting an error message there was a problem connecting to server. URLs with the type "file" are not supported

I keep getting an error messahe that says
There was a problem connecting to the server. URLs with type "file" are not supported
Any ideas?

Actually, in my case, turning off Time Machine didn't work. I had the same problem. We definitely traced it to Time Machine. The "Fix" was this: plugged in and designated different external HD as Backup volume. Then unplugged it and plugged in the original disc (after testing in in a different machine) and now the computer recognized it and error message stopped popping up. The Apple tech was as puzzled as I as to why this worked, but perhaps, forcing the machine to re-recognize it (or maybe even, gettting it recognized by a different machine first) somehow worked some magic.

HT201269 I am having problem connecting my iphone 4 Bluetooth with my Sony Viao Net Book and other iphones or other bluethooth enabled devices.

Having problem connecting my IPHONE 4 with my Sony Viao Net Book and other Bluetooth enabled Devices and would also need information about Syncing.

Have a look here for Supported Bluetooth Profiles
http://support.apple.com/kb/HT3647
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/

Problem connecting to non-apple routers with WEP key

Hi there, have tried to connect to two wireless routers recently which have WEP keys. One gives me "Connection timed out" after about 5 seconds and the other says "incompatible security". The passcode is too long to enter if I choose any of the WEP 40/128-bit options (it's 32 characters long!)
Any help appreciated.
Thanks,
Jon

Hi.
I can't connect to WEP networks either with Leopard 10.5.1.
It just says "incompatible Security". I've tried it for one hour without any luck.
Why doesn't Apple realize that there are millions of WEP encrypted networks out there and that it is essential to be able to connect to them. (it worked with Tiger, didn't it?)
Is there a knowledge base article out there what to do about it?
I just can't walk to hotel managers and ask them to switch to WPA, especially if they don't have a clue how to do that and older windows computers won't be able to connect any more.
Why a transparent menu bar but no way to connect to WEP networks?
I'm very disappointed. Apple, fix this! (now!)
Is there actually a way to get your money back for Leopard if this basic things don't work anymore?
Thank you for any help.

Problem connect to my office PC with Microsoft Remote Desktop from my MAC OSX 10.9.1

When I try to connect, I get the following message "Java (TM) is required to display some items on this page" and then a prompt to install Java, which I did already, and verified that it is running on my machine. I have downloaded Chrome
vs Safari for use since Safari is not compatible with Java version. HELP!!
CDr

Hi,
As far as I know, Java is not required for the Microsoft Remote Desktop client for Mac.
Please make sure that you download and install this App for the link below.
https://itunes.apple.com/us/app/microsoft-remote-desktop/id715768417
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
In addition, if issue persists, please provide us screenshots for further research.
Thanks.
Jeremy Wu
TechNet Community Support

Problems configuring HP Laserjet M1213nf MFP with Mac via AirPrint

Hello,
I have a HP Laserjet M1213nf MFP printer, connected to a Dlink DSL-2730U ADSL router. I am having problems configuring the printer with my Macbook running OSX Yosemite. I can see the printers name in nearby printers but when I try to add the printer, the mac gives me an error saying, "unable to communicate with the printer at this time". The network settings on the printer are configure for iPv4 and iPv6 addresses.
Previously, I had the ADSL DSL-2750U model router, and the printer was connected fine. I did not face any issues then. I have been facing problems since I changed my router so the problem should be in the router. I have the IP for the printer reserved in the DHCP reservation list on the router settings using the mac address of the printer.
Can someone please help me out here? Is there something I am probably missing.
Rgds
~n~

I talked to the DLink Support. They asked me to disable an option called "MultiAP Isolation" and Voila, the printer is working fine. I can add it to all my devices on the wireless network. I looked up google. Apparently, this isolation feature present in some routers, prevent wifi clients to interact with other devices connected to the wired network and also with each other. Thats why only my desktop which was also connected wired was only able to access the printer and not the laptops connected wirelessly.
Problem solved. Thanks for all your help on this one.
Cheers!

Have Airport Base: Want to share external HDD with Mac and PC

I have an Airport Base station with an external HDD connected via USB that has 2 partitions (1 in FAT32 & the other in NTFS).
I can access the eHDD via my Mac and listen to my music, photos, etc...
I want my XP machine to be able to do access the same eHDD and listen to music, see photos, etc.
My XP machine connects fine to the base station to use the Internet.
How do I share the external HDD so that it pops up in the Explorer in my XP machine?

Look into using exFAT format http://en.wikipedia.org/wiki/ExFAT

HDD with Mac OS X from old to the new MBP - possible?

Hi,
recently I found that the power of my MBP (Mb134) is not enough - I'm running a virtual machine and often used to compile a big project.
So I put my eye on the new MBP line. It has faster RAM and allows 8Gb (yeah, even 15" can do this, its just "unsupported").
The only question left: Can I take my 320Gb HDD from my current laptop and install it to my new one with no problems?
Or can I then simply boot from my old HDD using an external USB case?
Cheers,
Alex

The Mac OS X version on the old computer's hard drive can't start up the new MacBook Pro; a new copy of the OS will need to be installed from the new computer's original disks before it can be used as the startup disk.
(42390)

Problem connecting to WD Netcenter HDD with Mac

Similar Messages

Maybe you are looking for