Problem converting to mpeg4

I'm having a problem converting my music videos to mpeg4...they are in MOV format so I am able to put them into itunes, and everytime I try to "convert selection to ipod" it converts it very fast but when I try playing the video it just shows a white screen and doesn't play at all (on itunes or the ipod). Anyone know why this is happening!??

I also have this problem, but it appears that the problem is in the QuickLook implementation of Quicktime.
If I actually open the MPEG4 with QT or VLC it plays back at the right speed. Just upload it to YouTube and it should be fine.
Hope this works for you =)

Similar Messages

Convert DV/MPEG4 to WMV within Final Cut/Compressors/QTime??

Hi
I have a 45 second piece of corporate footage which originates on DV.
For internet streaming and for forwarding by email I 'reduced' this to MPEG4 and the quality looked great and it plays fine on most peoples systems.
However my problem is this: Some of the email recipients who are PC based are a bit old and unwieldy. They have only Windows Media Player on their system and are unwilling or unable to download Quicktime or Realplayer... Tsk, i know, don't ask!!. Anyhow how does one go about outputting the necessary file so that it becomes a WMV. Can I do this using the conversion tools on the Final Cut Bundle or should I be looking to other readily available tools to do this?
From the bit of searching I've done online one popular way of creating a true .wmv file is to use Quicktime Pro and software called wmv-9 available from Popwire. Does anyone have any experience of this before I shell out to buy it.
As a work-around for the time being I converted the MPEG4 file to an .mpg file using Toast's VCD creation facility. I found that the .mpg file generated will play in Windows Media Player and RealPlay but not in older versions of Quicktime.
So basically I have an MPEG4 file that plays in Quicktime and RealPlayer (..but not in any Windows MP) and a .mpg file that will play in Windows MP and RealPlayer but not all Quicktime Players.
Is there a file format I can convert it to (..or force it to) that is more universally accepted by all 3 main media players. I have used ffmpegX in the past for other conversions but this time around it does seem to be suitable.
If the bundled encoders can do the job what output settings, codecs etc should I use in Compressor, Quicktime Converter etc to achieve this?
Many thanks in advance for any help anyone is able to contribute.

An easy solution is be to use a Windows system with an analog video input card. Connect your Mac to your DV device, then connect the DV device's analog outputs to the Windows system. On the Windows system, download and install the free Windows Media Encoder from Microsoft. Use it to convert the feed from FCP's timeline to WMV format in real time.
-DH

Problems converting a pdf file to a word document using ExportPDF

I am having problems converting a pdf file to a word document (.docx) using ExportPDF. It is spends ages trying to upload the PDF file, but fails to do so. Should I just cancel my subscription?

I suspect that you are asking for help with CreatePDF. If so, you should post in
http://forums.adobe.com/community/createpdf
This is the Reader forum...

Having problems converting pdf to word. I'm not able to convert the file, what do I need to do?

having problems converting pdf to word. I'm not able to convert the file, what do I need to do?

Hi prates77,
I'm sorry to hear that you're having trouble converting files. Are you receiving the conversion error regardless of the file that you try to convert? Does the error occur whether you use the web interface, or convert via Reader? And an odd question: how many files do you have stored in your Acrobat.com account? We have seen reports of this error when there are a large number of files stored in the root folder of your Acrobat.com account.
I look forward to hearing back from you.
Best,
Sara

Problem converting Excel Charts

I am using Acrobat 9.3.4 (pro extended) and MS Office 2007 service pack 2. I am having problems converting the charts in Excel. The charts in Excel are vector, but when I print to the Acrobat driver or save in Acrobat, the graphs are converted to a low quality bitmap. Any ideas how I can preserve the quality of the original graph? Any idea how I can preserve the vector drawings?

I suspect the upgrade to Excel 2007 is at fault here, but I have not found any settings to get my old functionality back. I posted the same question to an Excel board, and they referred me to a similar thread, which sounds like other people are having similar problems.
It looks like some older version of Excel was having trouble when people used "save as pdf" (Excel was resizing the graphic and moving it off the page.) To eliminate the problem, they seem to have changed their graphics creation engine from vector to bitmap.
I have an older version of Excel (2003 sp3) at home, and the pie charts, for example, are clearly being created as vector drawings. In Excel 2007, they appear to be bitmaps created at screen resolution, which in my case is a fuzzy mess because of the need to resize the drawings. On the Excel board, there is a link to a "hotfix" but I don't know if it is the same issue. I will post the link here if it works.
I tried beating my head against the keyboard, but it has not helped.

Having a problem converting a PDF file to Words with Adobe's conversion program.

Having a problem converting a PDF file to Words with Adobe's conversion program.

See https://forums.adobe.com/docs/DOC-2412
If you need more help, please ask in https://forums.adobe.com/community/acrobatdotcom/

Problem converting graphics to hyperlinks in pdf's

I'm having a problem converting grapics, words or phrases to hyperlinks in exported pdf's. The only thing that converts is a complete URL even though the test for source and destination work perfectly.

In Indesign if you want to generate a PDF you "export". You have two options: Print or Interactive. If you use Interactive it will include hyperlinks by default. If you choose Print you need to check it:

Problems converting PDF to MS Word document. I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the co

Problems converting PDF to MS Word document. I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure. I attempted to convert the entire document and same result. I specifically purchased the export to Word feature. Please assist. I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

Hi sdr2014,
I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
So, let's try this:
If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
Please let us know how it goes.
Best,
Sara

Problem converting word 2010 Document

I am having a problem converting a Word 2010 document using Live
Cycle Designer ES2. I get the following
error msg:
Word (version XP onwards) could not be found
Word 2010 is installed.

I have just run into this issue myself. At first I thought it might be that LiveCycle is not yet fully compatible with Office 2010 but after doing some googling it seems there are plenty of folks out there successfully converting Word 2010 documents to PDF.
As a temporary workaround, you could try a copy of an earlier version of Word should one be available to you.
If I'm able to find a solution to the issue, I'll let you know promptly.
Josh Boyle
[email protected]
Cardinal Solutions Group

Problem Converting AVI (DV) to MOV (DV)

I have a number of AVI (DV) files that were previously imported on my PC, which I want to covert (using my Mac) to the more Mac friendly MOV (DV) file format.
I read that the best way to achieve this is to open the AVI files in Quicktime Pro and to convert the files to MOV using “SAVE AS”, as opposed to “EXPORT”. I understand that the benefit of using “SAVE AS” is that there is no recompression of the DV stream and that only the Container is changed (which results in a lossless conversion).
The problem is that the new MOV (DV) file is significantly larger than the original AVI (DV) file. For example, the size of a 13.5 minute clip increases from 2.95 GB to 5.88 GB.
I wouldn't expect such a significant change in file size if only the Container is indeed being changed.
I have also tried MPEG Streamclip to do the conversion, but I get the following message when I try to open the AVI (DV) file “File open error: this movie file is not supported”.
I have confirmed using Gspot that the AVI (DV) file is a 'Type 1' as opposed to a 'Type 2' file. Gspot also indicates the following information about the file “Multipart OpenDML AVL (3 parts). I don’t know if this is relevant.
Any advice would be greatly appreciated.

UPDATE PROBLEM SOLVED:
I was able to fix this problem by following a reply that I received on forum.videohelp.com. Basically, I was able to fix the problem by using a program called DVdate to convert my AVI (DV) files from Type 1 to Type 2. Now all is well. Here is the link below to the answer.
http://forum.videohelp.com/threads/331883-Problem-Converting-AVI-(DV)-to-MOV-(DV)?p=2057056#post2057056

PROBLEM CONVERTING MSWORD & MSPROJECT TO PDF!

Hi,
I'm running Vista, Office 2007 (inc. MSProject) and have Acrobat 8 Professional.
I'm having all sorts of problems converting. I don't know whether its someting to do with the pathing, since I first installed on D drive, rather than C. I just copied the entire Adobe folder from D to C.
The program allows me to convert URLs to PDF. But every time I try to convert a Word Doc, or MS Project Document, even small ones, I keep getting error messages, or it just freezes on 10%... Or says it can't do it... I'm getting so frustrated...
And yes I've run the repair, rebooted, but still have same probs...
Can someone please suggest something!

Do you have the Adobe PDF printer listed in the printers. If so, then print to the Adobe PDF printer (don't use print to file, the printer is set to ask for a file name or create one on the fly).
If you do not have the printer, then that is your problem. The Create PDF button will not work without the printer.
AcroTray is necessary for the printer to complete the process of conversion to a PDF automatically. If it is not active, then you have to print to file and then open the prn file in Distiller to create the PDF. From you statement about the missing PDF files, it likely is that you do not have PDF Maker installed correctly. Try the printer and if that works, then you have a PDF Maker issue.

Unicode problem: Converting operations on type X operands

I've got a problem converting a function module to unicode functionality: the original coding performs MOVE and SHIFT operations on operands of type X. The extended syntax check after unicode flag is set fails as X or XSTRING are not considered character-like anymore, of course, as these operations wouldn't delivery a stable result due to the variable lengths in UTF-8. Simply using type C, String or any other character-like operand type instead wouldn't help either, of course, because all bytestream information would be lost. Does anyone have recommandation on how I can solve this issue?
Thanks in advance!
Andy
Here's an example for the original coding (importhash = import parameter):
DATA: OP1(10) TYPE X,
SLEN TYPE I.
DATA: OP2(12) TYPE X,
DATA: T_OP2 TYPE SOMEINTEGER WITH HEADER LINE,
T_OP1 TYPE SOMEINTEGER WITH HEADER LINE,
OP1 = SOMECHARACTER.
SLEN = STRLEN( OP1 ) / 2.
MOVE SLEN TO THE_OP1.
APPEND THE_OP1.
DO SLEN TIMES.
MOVE OP1+0(1) TO T_OP1.
APPEND T_OP1.
SHIFT OP1.
ENDDO.
MOVE IMPORTHASH+0(2) TO SLEN.
MOVE SLEN TO T_OP2.
APPEND T_OP2.
OP2 = IMPORTHASH.
SHIFT OP2.
DO SLEN TIMES.
MOVE OP2+0(1) TO T_OP2.
APPEND T_OP2.
SHIFT OP2.
ENDDO.

Hi,
Especially for Unicodes, it is recommended to separate the Data declarations into a separate Type pool.
DATA: OP1(10) TYPE X,
SLEN TYPE I.
DATA: OP2(12) TYPE X,
Mark the type pool as unicode active. Then, use this type pool in your program.
The class variables in CL_ABAP_CHAR_UTILITIES may also help you.
Cheers,
Bhanu

Problems converting / importing PSE9 catalog into LR4

Im having problems converting / importing my PSE 9 photos into LR4. I went through the "File / Upgrade PS..." without success. It seems to work...ie LR4 closes down and then creates a new catalog but then a box appears saying that the photos could not be imported because they are missing or damaged. I then thought that my PSE 9 catalog is not set up right BUT LR4 tell me that the 27023 photos could not be imported for the reason stated. In other words LR does see the PSE catalog because it give the correct amount of photo's. I then did a small test by dragging some photos from my PSE 9 into LR4 and that seems to work. All the keyword tags move across. Is there a problem or dont I understand the process?

If I remember properly, it will not be an onerous task. What Exiftool will do is transfer the notes to some other metadata field that LR uses ... and I believe it can be done as a batch job, thus one execution of Exiftool does this for your entire photo collection (assuming its all under one parent folder).
Here is the method (see post #12 in this thread): http://forums.adobe.com/message/2148552#2148552

Problem converting Word 2007 DOC to PDF 9

Problem converting Word 2007 DOC to PDF 9
I have a Word 2007 DOC (not docx) file with pictures and text which converted perfectly with Distiller 8. I installed CS4 Distiller 9, and now the same DOC file flows over onto several extra pages. I am using the default settings. Any idea what has changed. Thanks in advance.

First, select the Adobe PDF printer in WORD. Then go through the document to check for the flow of the document. It should print the same as you see in the document after the printer has been selected.

PROBLEM converting word98 to PDF

Hello,
I'm having a problem converting word documents into PDF.
I have a word doc that includes some photos that won't
transmit in email without distoring the text and images.
So I wanted to make it a PDF so its all "fixed" and stationary.
My OS is Panther 3.9
But my Microsoft Word 98 program I use works from Classic (9) system
For whatever reason my Acrobat (OS X3.9) isn't working (worry bout that later) but my Preview works.
I just downloaded a free "Text to PDF" convert program for Mac
it converts the text (but alters it) and won't do the pics AT ALL
plus it has a bunch of random coding poping up in it.
Does someone have the answer to this problem?
Any recommendations on some freeware program downloads?
Thanks - coldgooseman

I appreciate all of your help.
*TO ROAM:*
+*For the document, if you click on Print (Command + P), then choose Save as PDF, does that work?*+
When I go to Print in Micrsoft Word 98 there isn't anything that suggest it cann do that. The winnndoww comes up and there's a tab named "Print" with the ffollowing options I can scroll down & choose:
Document
Document Prperties
Commentsss
Stylessss
Autotext EEEntries
Key Assignments
That’s it, there's nothing anywhere in Microsoft Word 98 that I can find that will allow me to Save as PDF. Besides Print, the options if I go to "Save As" are only:
Document Template
Text Only
Text Only With Line Breaks
MS-DOS TEXT
MS-DOS TEXT With Line Breaks
RICH TEXT FORMAT
UNICODE TEXT
STATIONARY
SPELLER CUSTOM DICTIONARY
SPELLER EXLUSIVE DICTIONARY
HTML Document
WORD 4.0
WORD 5.0
WORD 5.1
WORD 6.0 /95
*TO ALLAN JONES:*
+*consider upgrading to Office X or 2004 so you can do everything in OSX. I've had no trouble making PDFs from OSX Word docs.*+
Yeah I don't have money for that one right now. But I thought surely there was a quick free download I could get somewhere that would do the job.
+*A no-cost option is to save the Word Doc as an rtf file and see if all attributes are preserved. Then open it with TextEdit in OSX and see if it still looks right. If it does, print from TextEdit selecting the "Save as PDF" option.*+
I'll see if I can do that.
+*It's probably worth your while to see if you can get Acrobat working (if it's the OSX version).*+
I swear I had a Acrobat 6 but all I find is Acrobat 3. (I've never had reason to use it until now. I always Just use Preview to look at stuff.
*TO CORNELIUS:*
+*1. How long is this Word document and how many pictures?*+
14 pages
+*2. Does it have a .doc extension at the end of the file name?*+
I just tried that as you suggested and it WAS a little better. That is, the image started off with the right fonts and space right but as it went on it got more and more off.
AND it still didn't show any images (just blank spaces between text bodies.)
+*3. Is this a formal or business type communication, or personal email?*+
Its formal (an official report on a trip which is why I need the photos to be viewable.)
+*4. Are you sending it as an email attachment?*+
YES
+*5. What email are you using e.g. webmail like Hotmail, Apple Mail etc.?*+
Hotmail
+*6. Are you booted in OS X and working in the Classic environment, or booted and working in OS 9?*+
I'm working in OSX3.9 and the Classic Version opens up in it for Microsoft Word 98

Problem converting to mpeg4

Similar Messages

Maybe you are looking for