Problem excluding 'Others' in subtotal after applying Top N sort

Hi all, question from a newby.
My V8.5 Crystal report has two levels of grouping, Store and Brand with expense $ values subtotalled for each level. I am only interested in the Top 10 Stores per Brand so have used the Top N/Sort Group Expert so that only the top 10 Stores are shown. The problem is the subtotal for each Brand totals all the stores instead of just the top 10. I have not ticked the 'include others' box. How can I get the subtotal exclusive of the other stores?
Any help much appreciated,
Jan

use manual running totals to calculate the value, it should only pick up on the top 10, not all values

Similar Messages

How to display total values of revenue after applying top 5 using rank?

Dear Team,
I have a requirement to display sum of all revenues after applying top 5 using rank in Webi.
for Eg:
revenue product
100      aa
200      bb
300      cc
400      dd
500      ee
600      ff
700      gg
If i apply top 5 using rank i will be getting in my output:700, 600,500,400, 300.
But simultaneously i want to get sum of all revenue values (i.e) 2800.
How to achieve this? ur suggestion is much appreciated.
Regards,
Bansi

Hi Bansi,
You can use =nofilter([Revenue])
or sum([Revenue] in report)

Problem with Apache reverse proxy after applying SP13 NW

Hello,
we have a NW04 EP Portal and a Apache reverse proxy in the DMZ. After applying SP 13 for the portal we get the following error from the reverse proxy:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /irj/.
Reason: Error reading from remote server
Apache/2.0.52 (Win32) mod_ssl/2.0.52 OpenSSL/0.9.7e Server at servername.company.de Port 443
Is is it possible, that there is a problem with sp13?
Best regards
Daniel Holstein

Hi Daniel,
ok I`ll try to find a solution in parallel and keep you up to date.
In the following my settings in case I missed something:
<VirtualHost test.firma.de:443>
SSLEngine on
SSLProxyEngine on
SSLCertificateFile /apache/keys/pac_ssl_qep_dmz_server.crt
SSLCertificateKeyFile /apache/keys/pac_ssl_qep_dmz_server.key
ServerName test.firma.de:443
ServerAdmin [email protected]
LogLevel debug
ErrorLog logs/ssl_443_error
CustomLog logs/ssl_443_access_log common
ProxyVia Off
ProxyPreserveHost On
ReWriteEngine on
ReWriteLogLevel 0
ReWriteLog logs//ssl_443_rewrite_http.log
ProxyPass / https://backend.firma.de:50001/
ProxyPassReverse / https://backend.firma.de:50001/
</VirtualHost>
Regards, Jens

Problems with EM Database Control after applying 10.2.0.4 patchset

Hello all,
Host: Linux x86
DB: Single-instance running EM Database Control. Originally 10.2.0.1 patched to 10.2.0.4
Last night I upgraded the database from 10.2.0.1 to 10.2.0.4. All appeared to go well. I didn't get any errors in the process and when I logged in to the database control, all appeared well. It was late at night so I didn't browse around for very long, though. When I came in this morning and did some more extensive testing, upon logging in I first noticed that in the General section the database version was listed as 10.2.0.1.0. I thought that this was pretty odd since I had just been logged on to SQL*Plus and saw that the database was reporting back that it was at version 10.2.0.4.0. I refreshed the page and I saw
"java.lang.Exception: IOException in reading Response :: Connection reset"
at the top of the page. I have seen this problem before and, in the past, it has been resolved by either restarting the dbconsole or making sure that the monitoring configuration is set up correctly. The first thing that I did was issue
[host]$ emctl stop dbconsole followed by
[host]$ emctl start dbconsole
to see if that would do the trick. When I saw that it didn't, I went into the Monitoring Configuration and was surprised to see that it said "No items were found." I refreshed the page and this error appeared:
oracle.sysman.emSDK.emd.comm.CommException: IOException in reading Response :: Connection reset
I tried to follow all of the instructions in the ReadMe as closely as I could. I have been searching on the Internet and the Oracle Forums for most of the day to try to find out the cause of this error. I see that people have these errors, but the circumstances are not the same as mine. Is this a common problem? Does anyone know what I can do to resolve it?
Any help would be greatly appreciated.
Thanks!
John

Hello Satish,
Thank you for your reply. I don't know if this is normal or not but, now after the upgrade, in the ORACLE_HOME I have a directory that's been created called hostnameSID (the fully qualified host name of my computer and the SID of the database). Inside of it is a sysman directory, an emctl.pid file and an oraInst.loc file. I also still have a syman directory under the ORACLEHOME but the dbconsole appears to be running out of the hostname_SID directory. Is that normal?
I looked up the article that you referenced and looked for the targets.xml file first in the ORACLE_HOME/sysman/emd directory. I found a targets.xml file along with several other similar files, targets.xml.1, targets.xml.2, etc. The targets.xml file just had the following:
<Targets>
</Targets>
Seeing that it was blank, I then took a look at the the hostname_SID/sysman/emd folder. I saw only one targets.xml file in this location and when I opened it up it had the following:
<Targets AGENT_TOKEN="+alpha numeric string+">
<Target TYPE="oracle_emd" NAME="+hostname+:3938"/>
<Target TYPE="host" NAME="+hostname+"/>
</Targets>
The contents of that file seemed to match what the article which you cited indicated should be in the file. Since I have a single instance managed by the dbconsole and not EM Grind Control, I'm expecting the files to be a little bit different. Am I wrong in assuming that? Still, I'm not sure if I should have the hostname_SID directory beneath the ORACLE_HOME.
Any ideas?
Thanks again for your help,
John

Problem with automated height/width after applying effect

Hey guys,
I have a panel that automatically resizes after some other contents is being added. All the time there is a scale-effect. Whenever I move the mouse over any of those children they zoom in and there the height & width of the parent container automatically resizes.
However I have a minimize button for that one along with a resize effect. I can resize the complete container to a minimize size (e.g. 40x40), but when I resize back with the same effect, the panel does not automatically resizes with added children anymore.
I did not set any special properties on the panel from the beginning, but some property must be different now. It is not "autoLayout" and also the "percentageWidth/Height" does not work properly as that command will cause the panel to stretch over the complete stage. Any suggestions here?

Mmmh...that does not seem to solve the issue for me. Even when setting the width and height to NaN before the effect is played, it will still lead to a fixed height and width of the parent panel container. When I add new children the parent container is not properly resized, means that the chiildren just go beyond the parent container's border.
Setting these parameters after the effect is done leads to the following crash: ArgumentError: Error #2004: One of the parameters is invalid.
at flash.display::Graphics/drawRect()
at spark.accessibility::PanelAccImpl/eventHandler()[E:\dev\4.0.0\frameworks\projects\spark\s rc\spark\accessibility\PanelAccImpl.as:361]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\co re\UIComponent.as:12266]
at mx.core::UIComponent/dispatchResizeEvent()[E:\dev\4.0.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9641]
at mx.core::UIComponent/commitProperties()[E:\dev\4.0.0\frameworks\projects\framework\src\mx \core\UIComponent.as:7866]
at spark.components.supportClasses::SkinnableComponent/commitProperties()[E:\dev\4.0.0\frame works\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:414]
at mx.core::UIComponent/validateProperties()[E:\dev\4.0.0\frameworks\projects\framework\src\ mx\core\UIComponent.as:7772]
at mx.managers::LayoutManager/validateProperties()[E:\dev\4.0.0\frameworks\projects\framewor k\src\mx\managers\LayoutManager.as:572]
at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.0.0\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:730]
at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.0.0\frameworks\projec ts\framework\src\mx\managers\LayoutManager.as:1072]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
Here is my code...anything wrong here.
private function recreateWindow(e:MouseEvent)//thrown once the user moves his mouse over the minimized panel
     myResizeEffect.heightFrom = 40;
     myResizeEffect.heightFrom = 40;
     myResizeEffect.heightFrom = lastHeight;
     myResizeEffect.heightFrom = lastWidth;
     myResizeEffect.play();
     myResizeEffect.addEventListener(EffectEvent.EFFECT_END,resetMinimizeValues);
private function resetMinimizeValues(event:EffectEvent):void
     myResizeEffect.removeEventListener(EffectEvent.EFFECT_END,resetMinimizeValues);
     //adding the old listeners before the panel was minimized
     this.width = NaN;//crash
     this.height = NaN;//crash
Any suggestions?
...and how can I remove the "Question answered"-tag...?

Problem with Adobe Reader 8.1.2 after applying NW04s SPS15

Hi Experts,
After installing NW04s SPS15 (from SPS14) we have problems viewing certain PDF documents ie. when trying to load the ESS 'Code of conduct' PDF document. Adobe Reader 8.1.2 will consume CPU and memory on the front-end PC, and sometimes it will eventually load - after 15 minutes or just makes the PC unusable.
This does not happen on NW04s with SPS14 and it does not happen when using Adobe Reader 7.1.0 - which means we have ADS working correctly
We have tested this on numerous computers, including loading the PDF successfully using Adobe Reader 7.1.0, then updating Adobe Reader to 8.1.2 to find that it no longer loads the PDF.
We raised a message for the ACF installation file as per note 766191 and installed it without any success.
Has anyone else experienced this after applying SPS15? Or can suggest some things we can try?
Thanks.
Kind Regards,
Darvern

Hi,
We are also struggling with the same problem after upgrading the portal to NW04s SPS15. It is consuming 2 to 3 min for opening the PDF form in ESS under Travel & Expenses.
We are also with same version of Adobe i.e.8.1.2
Still waiting for the solution,
Regards,
Venu

I have just updated to Yosemite, but now I can't get the custom shortkeys to work. In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution. Does anyone have the problem? All the other shortcuts work!

I have just updated to Yosemite, but now I can't get the custom short-keys to work.
In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
Does anyone have the problem? All the other shortcuts work!

Hi Thomas,
I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
Thanks for identifying this issue!
In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
Cheers,
Alex

Allt he links in the header of any websites are not working, I reinstalled fiorefix and it s the same. No problem in others browser. the tool bar is working but not the link sinside the web page located between the top 300px height

all the links in the header of any websites are not working, the cursor is not changing into pointer and no way to click on any link located at the top of any website page. I reinstalled firefox and it s the same. No problem in others browser. the tool bar is working but not the links inside any web page located between the top 300px height.
So I can t tlog into any website, i cant write an email as the compose button is located in the top of the page.. Please help, i have all my bookmarks into my firefox...

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problem after applying EP 8

Hi ,
I am unable to open old models after applying Enhancement package 8.
Can any one suggest what need to be done.
Thanks
Sudhakar.

Hi,
do you receive any error message? How does "can not open any models" look like?
By the way - there is no EHP 8 at Java side so I guess it must be the backend?
Anja

I am unable to print a proper playlist in the jewel case format. Lines print on top of one another. No problem with other print formats

I am unable to properly print a playlist in the jewel case format. All lines bunch together. I have no problem with other print formats. Help please.

If it is a USB powered external, no AC adpater, that may be the reason. Mac notebooks are known to have low powered USB ports. You can get around that with a Y USB cable to connect to 2 USB ports at the same time.

After applying new updates, problems with opening SQL*Worksheet window

SQL Developer version 1.2.0 Build MAIN-29.98
OS Windows XP with Service Pack 2.
Problem:
Connection to database works fine.
Opening SQL*Worksheet errors with below error:
java.lang.IllegalAccessError: tried to access class oracle.ide.net.IdeURLStreamHandler from class oracle.ide.net.URLFileSystem$1
     at oracle.ide.net.URLFileSystem$1.createURLStreamHandler(URLFileSystem.java:87)
     at oracle.ide.boot.URLStreamHandlerFactoryQueue.createURLStreamHandler(URLStreamHandlerFactoryQueue.java:119)
     at java.net.URL.getURLStreamHandler(URL.java:1104)
     at java.net.URL.<init>(URL.java:393)
     at java.net.URL.<init>(URL.java:283)
     at oracle.ide.net.URLFactory.newURL(URLFactory.java:636)
     at oracle.ide.net.URLFactory.newURL(URLFactory.java:136)
     at oracle.dbtools.sqlworksheet.sqlview.SqlEditorNode.<init>(SqlEditorNode.java:65)
     at oracle.dbtools.sqlworksheet.sqlview.SqlEditor.openNewEditor(SqlEditor.java:1973)
     at oracle.dbtools.sqlworksheet.sqlview.SqlEditor.openNewEditor(SqlEditor.java:2032)
     at oracle.dbtools.sqlworksheet.sqlview.SqlEditor.openNewEditor(SqlEditor.java:2050)
     at oracle.dbtools.sqlworksheet.sqlview.SqlEditorWizard.invoke(SqlEditorWizard.java:114)
     at oracle.ide.wizard.WizardManager.invokeWizard(WizardManager.java:310)
     at oracle.dbtools.sqlworksheet.sqlview.SqlEditorController.toolbarAction(SqlEditorController.java:1013)
     at oracle.dbtools.sqlworksheet.sqlview.SqlEditorController.handleEvent(SqlEditorController.java:562)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:551)
     at oracle.ide.controller.IdeAction$2.run(IdeAction.java:804)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:823)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:521)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Anyone else facing this problem? Any solution to this problem?
Thanks,
Raj.

I believe (hope) you're saying that you can not update SQL Developer to the latest release via "Check for Updates".
My problem is that I get this error when running "Check for Updates" on a third party extension and not Oracle updates.
I did a fresh install and ran the update and it will always give me the error. It's easily reproducible. Although, the second restart will fix the problem I'm concerned that this will give the impression that the extension caused the problem.

I am using Dreamweaver cc 2014 and after applying css styles to my fluid grid layout I lose the resize, delete, duplicate and move up/ down ability.

I am using Dreamweaver cc 2014 and after applying css styles to my fluid grid layout I lose the resize,delete, duplicate an move up/ down ability.
For this reason I cannot build new pages by copying one page to create another.
I have a third style sheet that I use for the navigation styles and h1 -h6 ect. tags. and I am also using a css drop menu, can one of these be the problem?
The css menu I am using has the following script - I goes at the bottom of the html page. Before the closing body tag,
<script>
$(function () {
$("#nav").tinyNav();
</script>
I am also using the following for image control - I place it towards the top of the fluid
grid style sheet.
    box-sizing: border-box; /* Opera/IE 8+ */
    -moz-box-sizing: border-box; /* Firefox, other Gecko */
    -webkit-box-sizing: border-box; /* Safari/Chrome, other WebKit */
Can some one please help.

I am using Dreamweaver cc 2014 and after applying css styles to my fluid grid layout I lose the resize,delete, duplicate an move up/ down ability.
This implies there is something broken in your FluidGrid Layout CSS file.   It could be something simple like a missing semi-colon or curly bracket.   Run your code through the W3C validation tools below to check for errors. NOTE: ignore reported errors in boilerplate.css
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Changing duration after applying motion properties?

I have a series of still images that I applied scaling and motion to and I now want to change their duration so I right-click, choose Speed/Duration and change the timecode for the duration to make the still image take less time on screen. After doing this the scaling and motion no longer work. Is there a way to change still image duration after applying scaling and motion to them?
Thanks.

Looking for some answers (Oh I realise this thread is 1 year old!) about clips duration I bumped into this one. I wonder if part of the above problem had something to do with pictures coming from different cameras - I seemed to notice that with the same preference choice some clips seem to interpret the duration differently? Probably when the aspect ratio is different from one camera to another, or if one has changed his or her aspect ratio on that camera in a shooting session.
I do remember that to change the duration default via preference it has to be done before importing photos in the project windows or has someone pointed out, re import them after changing the default.,
I also thought after changing the duration of clips that had key frame for various functions, the new duration may have excluded those key frames because the shortening had truncated the part where the end key frames were, thus making them void.
(I'm a little surprised to be in this thread as I had written in the "question" field "still images duration" and was in another thread with 5 entries, the last one from Anne Benz with a shot of a time line, also from Oct 2012! But some how when I tried to add to it, I could not and found for unknown reason I was not signed on! But now I come back signed on with the same question I'm in the different thread?)
Perhaps the following may be interesting and helpful for some. Changing duration of still in the time line can be quite useful when one needs to match the Video sequence with its added Audio. As you have a display of stills with transitions, animation etc. and you add some music to it. If they don't quite finish at the desire point. (usually with the end of the music, song). You can fine tune it (like within a few seconds) by shortening or lengthening the clip, clips duration. And if it's ok with what you have you can select the whole (video) time line and after deciding how much is the difference between your portion of music and your clips apply that time. Sometimes using only a few clips is enough other times the whole of it works better. I find it's ok only for a few seconds though as there are a couple of problem with this, The key frames may need to be readjusted and or even be out of action (as explained earlier) In that case it's probably better to have the video clips on a sequence of their own then add the music on a new sequence and match them this way on the same time line.
PS: Titles and anything relying in proper timing placement above this video display timeline needs to be checked, perhaps included or adjusted with clip or clips duration change.
I really was looking at ways of creating a sequence with a variety of animations that I could re used for other project with the "Copy" then "Paste Attributes" in the hope it would be quicker than going back to the "Contor Effect" function all the time. I remember using (MS Movie Maker) and it had a few icons for this purpose that one would apply for a clip. It was rigid but quite effective. This way even if I needed to adjust the key frames, they would already be in place. (I already use this technic with similar pics, I copy one animation I like and "paste attributes to a bunch of pics, sometimes reverse the key frames, "copy" then select alternate pics from the previous selection and paste the new attributes to them... May be not everyone's taste!
So if I could import such a sequence in my Projects and place it on Video 2 with each pic. labelled with its appropriate animation and obviously key-framed accordingly. (I would have created a photo folder and renamed each of its photos with one of the desired labels, ie Pan down, Pan left, Zoom in, Rotate %, etc) - But I thought I hit a snag with the duration....
I have actually gave this a quick try and it seems to have some value. I just found out that it's worthwhile to get the shortest but meaningful labeling for this "templates" in order to identify them easily in their smallest view (time line zoomed out) ie Pan Left = PL, PR, PU, Zi, Zo etc.

2012R2 Application installation steps after deploying OS from Task sequence is slow after applying hotfix 2910552

We are currently using CM2012r2 for Endpoint protection, and in trying to save licensing costs, I have been given the task of doing imaging and application deployment through CM as well... everything started off well... noticed that imaging took a lot longer
than I remembered when I used CM2007 at my previous employer. Found we needed hotfix 2910522 and what took an hour to download now only takes 5 minutes (yay!) Then started other strange issues. Mostly the fact that in the task sequence, the install application
blocks (we have 3 with 4-8 apps each) suddenly got really slow to execute. (boo!) The application blocks eventually finish, but take about 5 hours and only the last block actually installs. For example: 7zip takes 15 minutes to "install"
but since it isn't in the last block, it doesn't in fact install on the system.
so here is what I know so far:
Updated the boot image after applying the hotfix
Added the hotfix to the Windows and configmgr setup step command line to install the patch
Verified that all applications install correctly outside of the task sequence.
Created a new task sequence just in case the hotfix messed something up.
here is what I've noticed:
Only happens on workstations that have been imaged previously by CM (even if I remove the machine from AD and CM)
New machines image just dandy
not hardware specific (tested on 5 different laptop models and 3 desktop models)
workstations that have the issue, when finished, only installed the applications from the last block (4 apps) and none from the previous 2 blocks (16 applications)
If imaged new (not previously known) it installs the client correctly and it checks in, ones with the issue are in internet only mode and don't see the PKI cert for the machine, and will not check in.
Things I've checked, double checked, verified, and done:
All applications have the box for "allow this application to be installed from the Install Application task sequence action..."
applications are on all distribution points
Distribution points are healthy
One MP/DP was complaining about how it couldn't access a SMS folder. uninstalled the roles, let it sit over the weekend, reinstalled this morning
Verified that the servers were on 10Gb full and were not throwing error on the line
Antivirus scanning was not scanning the store (used the built in template for scep)
Next steps that I am going to try:
create a new task sequence and split up install application blocks to only have single applications in them
recreate the boot wim for the media
Thanks in advance

So this issue of yours is in B&C -task sequence? You're using capture CD for capturing, why? Why not automate the build entirely.
I'd suggest you add this:
http://support.microsoft.com/kb/2775511/en-us to your BUILD image (either online of offline, in the WinPE -phase), it fixes many WMI related problems.
After you've done your golden .wim, deploy it to your clients.
We don't do a build and capture because certain applications require handling on our part. Management has said it needs to be a certain way, therefore this is how we have to build it. (mostly settings, and views that can't be controlled through registry,
Group Policy, etc.) There are users that if they have to click on an accept button or it isn't the right color, or they want a different icon in their lab, then they go to the top and it comes back down to us, and our lives become miserable.
We create the image in audit mode, capture it using boot media, and sequence in things that are updated constantly (flash, shockwave, java, etc.) through the task sequence.
in relation to that KB, why would it work on new machines but not ones that have been touched before?

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Problem excluding 'Others' in subtotal after applying Top N sort

Similar Messages

Maybe you are looking for