Problem faced during liveupgrade
Hey,
When I upgraded Solaris 9 to Solaris 10 using flash archive .
luupgrade -f -n ABE_NAME -s BOOT_MEDIA(Solaris 10 dvd) -j profile.
Here the profile contains install_type flash_install and the location of the flar.
But after the activation before the upgraded unit came up I had to enter the defaultrouter,language details similar to fresh install and top of it the network interface changed from ce0 to be0 and the machine cannot be pinged now.
Right now upgrade is stopped and the back to square one.
What is that I have done wrong here . Is it normal behaviour to ask configuration details after the upgrade?
Hi,
Can you please let me know what you have selected out of 2 options.
Thanks
Suresh
Similar Messages
-
Problems faced during BW3.5 to BI 7.0 Security Upgrade
Hi everyone,
We are planning to do an upgrade on our current BW 3.5 to BI 7.0. Could anybody share their experience on the problems you've faced during the upgrade and a model solution/precautions. I have completely gone through the documentation provided by SAP. But still wanted to know things that i have to be aware of.Hi Jagadesh,
There is no document as such which provides you the step by step information on the upgrade. However, if you doesn't have fair idea on BW and BI, I recommend you to take assistance of your team members, since a simple incorrect step may lead to severe issues. Even though there is no production impact, your management needs this system live always for reporting
If you still wish to take up the task on your own, I wish you all the best Here is an outline:
First decide on the mode of upgrade (Automatic or manual) and follow the steps below:
1. Enable analysis authorization using RSCUSTV23
2. Specify how the existing BEx Anlayzer is called using RRMX_CUST
3. Identify the roles, profiles, and BI related auth objects
4. Activate business contet related InfoObjects (0TCA* and 0TCT) and InfoCubes (0TCA) using RSA1.
5. Make 0TCAACTCT, 0TCAIPROV, 0TCAVALID infoobjects as authorization relevant from RSD1.
6. If you are using automatic migration, use RSEC_MIGRATION from SE38 and follow the steps.
7. Incase if manual migration, follow the steps provided in the previous post.
8. Create anlaysis authorizations using RSECADMIN
9. Adjust the old roles with new authorization objects.
10. Test the new setup and go-live
Hope this helps!!
Regards,
Raghu
Edited by: Raghu Boddu on Dec 15, 2010 2:39 PM -
What problems faced during implementation BW projects few eg: Please
Hi BWers,
Please, can you give me some examples regarding
" what problems you faced during implementation of BW projects.
Thanks
points will be given with big heart.
Again Thanks
Regards
Mubeen.Hi,
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Details on the Implementation Phase
http://help.sap.com/saphelp_nw04/helpdata/en/2c/36177e645911d395fe00a0c94260a5/frameset.htm
Hope this helps.
Thanks,
JituK -
Problem facing during installing of window 7
Hello sir,
I have HP laptop modl g6 pavillion... i am trying to install window 7 but the boot option not showing when i insert the disc and restart .... will you please suggest me something so that i will install window 7 on my laptop ....
This question was solved.
View Solution.Hi Sir,
Turn off your laptop, as soon as you start your laptop again then continously press 'ESC' - till you will enter the Start-Up Menu, in menu Choose (F9 - Boot Device Options) in there you can choose to boot up from CD/DVD or whatever you want too boot up from I think thats what youre looking for.
- Hope this helped you, let me know if there is any questions or anything.
Kind regards,
Wael
Best regards,
Egypteren
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Problem facing during BAPI call for an inbound interface.
I have requirement where in i need to make a BAPI call from SRM system using RFC adapter.
After importing the BAPI(Z_INV_REF_PO) in the Integration Repository the structure looks to be a follws,
1.Request
2.Response and
3.Exception (fault) Message types.
In my BPM i did a transformation for my source structure with BAPI request. But while doing a BAPI call it throws me Application error as follows,
RFC adapter is working fine.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">Z_INV_REF_PO.Exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please help me out on this. Itz very urgentHi,
As the error is Applcation_error, the data reached the target system but the BAPI call fails. So you mignt not be providing all the mandatory fields to the BAPI.
Perform a standalone testing of your BAPI, with the data being passed from XI See if the BAPI call is successful..
Hope this helps you.
cheers,
Siva Maranani. -
iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
Thanks in advance for feedback
Best regards,
MarcoHello Jeff,
Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone. I would be concerned too if the audio on my iPhone was not working unless using speaker phone. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M. -
How can i retrieve purchased audiobooks that were not synced (problem encountered during sync process)? My account shows the purchase history, but the apps are no longer displayed in itunes or on my ipad or iphone. I'm not very savvy with using iTunes - I don't think is very intuitive (unlike me:)). Any help would be appreciated.
ThanksHello mcegirl4,
Thanks for using Apple Support Communities.
Please refer to the instructions in the following article to assist in downloading those previous purchases from iTunes and the App Store:
Download past purchases
http://support.apple.com/kb/HT2519
Take care,
Alex H. -
Problems found during the EXPORT to specified keyin table.
Hi
I am getting this error in sending iDOC system( We have iDOC-XI-iDOC Scenario.) I tried to reregister the queues but still nothing is passing thru XI.
Thanks,
ManishAcutally I am getting this DUMP in ST22.
<i><b>ShrtText |
Problems found during the EXPORT to specified key in table.
What happened?
Error in ABAP application program.
The current ABAP program "CL_XMS_PERSIST================CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
The table " " does not contain any data records with the specified key.
The system called the internal SAP database interface because it
expected to find such a key.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"EXPORT_TABLE_UPDATE_CONFLICT" C
"CL_XMS_PERSIST================CP" or "CL_XMS_PERSIST================CM00W"
"INSERT_MSG_ALL"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "CL_XMS_PERSIST================CP"
in "INSERT_MSG_ALL".
The main program was "SAPMSSY1 ".
The termination occurred in line 302 of the source code of the (Include)
program "CL_XMS_PERSIST================CM00W"
of the source code of program "CL_XMS_PERSIST================CM00W" (when
calling the editor 3020).
Source Code Extract
Line
SourceCde
272
IF lv_switch_mode = 2.
273
IF export_to_db_optimized = co_true.
274
CALL FUNCTION 'SXMB_EXPORT_TO_DB'
275
EXPORTING
276
iv_kind = 'P'
277
it_prop = lt_prop
278
iv_switch_mode = lv_switch_mode
279
iv_msgguid = clustkey-msgguid
280
iv_pid = clustkey-pid
281
iv_vers = clustkey-vers.
282
ELSE.
283
EXPORT lt_prop FROM lt_prop
284
TO DATABASE sxmsclup2(is) FROM wa_clup ID clustkey.
285
ENDIF.
286
ELSE.
287
IF export_to_db_optimized = co_true.
288
CALL FUNCTION 'SXMB_EXPORT_TO_DB'
289
EXPORTING
290
iv_kind = 'P'
291
it_prop = lt_prop
292
iv_switch_mode = lv_switch_mode
293
iv_msgguid = clustkey-msgguid
294
iv_pid = clustkey-pid
295
iv_vers = clustkey-vers.
296
ELSE.
297
EXPORT lt_prop FROM lt_prop
298
TO DATABASE sxmsclup(is) FROM wa_clup ID clustkey.
299
ENDIF.
300
ENDIF.
301
>>>>>
IF sy-subrc <> 0. "#EC *
303
m_syserr_raise 'PERSIST' 'MSGGUID_EXISTING'
304
clustkey-msgguid clustkey-pid
305
clustkey-vers ''.
306
lv_p1 = clustkey-msgguid.
307
lv_p2 = clustkey-pid.
308
lv_p3 = clustkey-vers.
309
310
RAISE EXCEPTION TYPE cx_xms_syserr_persist
311
EXPORTING id = cx_xms_syserr_persist=>co_id_msgvers_existing
312
p1 = lv_p1
313
p2 = lv_p2
314
p3 = lv_p3.
315
316
ENDIF.
317
318
319
320
table SXMSPRES (resources)
321
table SXMSPXRES (X-resources)
Internal notes
The termination occurred in the function "expOutDb" of the SAP
Basis System, specifically in line 3748 of the module
"//bas/640_REL/src/krn/runt/abexpo.c#8".
The internal operation just processed is "cmpr".
The internal session was started at 20060724051049.
Internal call code.........: " "
Key..................: " "
It is very likely that a constellation similar to the following applies:
Process 1: Process 2:
UPDATE x. ==> NOT_FOUND
UPDATE x. ==> NOT_FOUND
INSERT x. ==> ok
INSERT x. ==> DUPLICATE KEY
DELETE x. ==> ok
UPDATE x. ==> NOT FOUND
+ DUMP
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
[0] DoStack2 ( 0x105a4f7c0, 0x0, 0x2d1b000, 0x100000000, 0x1, 0x0 ), at 0x100471a60
[1] CTrcStack2 ( 0x105a4f7c0, 0x0, 0x100000000, 0x2d1ac00, 0x2, 0x102d1ada4 ), at 0x100471610
[2] __1cQrabax_CStackSave6F_v_ ( 0x10303b400, 0x303b400, 0x103874d10, 0x101fcfce8, 0x100000000, 0x
[3] ab_rabax ( 0x1, 0x2d1ac00, 0x0, 0x100000000, 0x3873800, 0x100000000 ), at 0x100a7fa04
[4] __1cIexpOutDb6FppCpLLInJEXPO_MODE__i_ ( 0x2, 0xe82, 0xffffffffffffffff, 0x101f97a90, 0x2, 0x38
[5] __1cTwrite_data_compress6FkpnICONNE_WR_C_i_ ( 0xffffffff7fffb038, 0x1070, 0x1000, 0x10095fa9c,
[6] __1cMab_connwrite6FIIpHIpFp0pIppnHAB_DATA_ppv_ipFppCpLLInJEXPO_MODE__i_i_ ( 0x0, 0x4, 0x10302a
[7] __1cLexpo_export6F_v_ ( 0x0, 0x960000, 0x95f800, 0x0, 0x103847980, 0x1 ), at 0x10095aa20
[8] __1cIab_jexpo6F_v_ ( 0x0, 0x5b52800, 0xd0, 0x100000000, 0x1, 0x0 ), at 0x100952df4
[9] __1cIab_extri6F_i_ ( 0x100000000, 0x5a37800, 0x2f0, 0x1, 0x0, 0x5e ), at 0x10068ccf8
</b></i> -
Problems faced by me using the 5700
I bought the nokia 5700 a month ago and it has been this way since then. I face a few problems which i wish were added in a update for the firmware by nokia. Is there anyway to inform nokia about this?
Problems faced by me:
1)In the log after switchin the mobile on and after about a day or two when i call from the log i.e pressing green button on a contact or going into options and selecting voice call. Nothing happens. No call can be made from the log. It is very annoying cause everyone directly calls from the log upon seeing the miss call... Though the call can be made from the contacts list and everywhere else, u can dial a number and call. The problem is just with the log(fixed by turning the mobile off then on but eventually the same thing happens)
2)The time and date when set as a screensaver does not appear all the time, the screen maybe blank or time maybe shown.
3)This is going to be very weird, i have a habit of just seeing emergency numbers such as 911 and 112 appear when the phone is locked, when i dial these keys sometimes the numbers appear and sometimes they dont.(again fixed by turning the mobile off then on)
4)This is the BIGGEST FLAW FOR THE 5700 FOR ME, if you have noticed (i dont know abt other 5700's but this is the case with mine) in the log if you have contacts having numbers which can be divided into home ,mobile,etc. When you see the log no matter wherever the call came from you see a mobile icon.This again is very annoying cause you dont come to know where the call came from and after a miss call, u would have to go in options, use number, edit number and then see it. Or by calling and seeing the number for a brief moment. So you can accidentally dial at someones home though you dont want to and even they didnt call from their home.
Anyone having these problems?
Nokia 5700 has been out for 3 months over here i guess we deserve updates for the firmware. Dont we?
And though i get these problems i can still say with dignity that 5700 is cool.
btw If i format do i lose any themes installed on the phone memory? Cause i downloaded this theme from nokia once and you dont get it any more for some odd reason.Go to Nokia Service nearet your location. Ask them for a solution.
-
Warning: Problems occurred during synchronization of the system landscape
Hello
I have created systems in system landscape, TMS is working fine, all the configuration steps are completed successfully.
am working in Solution Manager 4, in project change -SOLAR_PROJECT_ADMIN - Project Administration - in 'System Landscape' tab  Change request and when I activate change request management I am getting following messages:
1. Warning: Problems occurred during synchronization of the system landscape
2. The project is not released. Hence cycle can not be created.
Its bit urgent as I m in middle of this activity, please assist me on the same
Thanks
SharmishthaHello Jason & Prakhar
Thanks for your quick response. I am basis person, and configuring this change request management for one of the project.
Jason:
Will you please check with your basis person about these settings and let me know the same. I have set the settings as follows
C= Development (source system)
T = Quality
P = Production
Prakhar:
I have checked with all RFC connections are working fine, authorizations are also properly given.
I didnt get your point No correctly defined maintenance project exists, I have already created project in project administration transaction, assigned the system landscape, I have activated project IMG in IMG Project and then going in change request tab to activate the change request management, where its giving me above error.
More over, as you have mentioned I am getting following message in SLG1:
Project CHARM_GBW not found in the project administration table
This is asking me to do following things:
Synchronize the project in Change Manager with the Solution Manager. Call the Solution Manager with the transaction SOLAR_PROJECT_ADMIN, and go to the 'System Landscape' tab, and then the 'Project Cycle' tab. Select the 'Change Request Management' field, and choose 'Refresh'. Project CHARM_GBW should then be available.
Where do I have to make entry for this? I can see the entry in /TMWFLOW/PROJMAP table too. I dont know what more I need to do for this.
Problem is I cant see Project Cycle tab in System Landscape. Prakhar, frankly I am not able to find any step wise document on this part. So will you please help me with some documents on this? I am from technical side thus there is bit difficulty to understand this scenario from functional view.
I will be grateful for your help,
Thanks
Sharmishtha -
TWO VERY TOUGH SUPPORT PROBLEMS FACED AND SOLVED IN REAL TIME
pls any body post two very tough support problems faced and solved in real time.
my id is: [email protected]Hi Priya.,
For example client wants his customer legacy number in XD01 master data which is not there in Standard SAP.we can satisfy the requirement with USER EXIT
2) If the client wants customer Phone number in the sales order we can use user exit to satify the requirement
These are not provided in Standard SAP & we should work out on alternative way
REWARD if helpfull
Thanks & Regards
Narayana -
Warning: Problems occurred during synchronization in Charm with virtual sys
Hi Team
I have configured charm with virtual system --(Dev>V01>V02>) as client specific STMS , Where V01 is Quality and V02 is production system; When I do consistency check from solar_project_admin tcode for project created, it shows no errors ;
but when i try to activate the charma and click on "refresh" button , it throws following error
"Warning: Problems occurred during synchronization" ;I have checked the logs in SLG1 for object "/TMWFLOW/CMSCV" ; but
there are no errors except warnings for BC Sets , Can you pl guide what might have gone wrong ?
All the RFC's are working fine and there is no authorization issue in solution manager.
Thanks
Swatihi,
for the CTS activation you must do all the below,
1. SMSY --> landscape creation
2. RFC Creations
3. Client Specific TMS configuration
4. Prj --> CTS activation.
go through the below doc,
[https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf|https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf]
jansi -
Hi All,
I want to know the problems facing in Uploading Xternal file in BDC.
Its very Urgent . Points will be rewarded to good ans.
Bye.Hi
Many problems can occur while doing bdc like field mis match can occur,Data over lapping between fields etc
Regards
Shibin -
how to resolve this problem. During ti install the new verson in my iPhone appear "The iPhone could not be restored. An unknown error occourred (1015)
You can't resolve the issue. Your phone is bricked.
This is the error message that happens when you try and update a jailbroken phone.
Discussion of jailbroken phones is prohibited by the Terms of Use of this forum.
You need to buy another phone. -
I cannot synchronizing my iphone 5. The problem is during synchronizing contacts, calendars and notes. If I do not mark this step it synchronizes perfectly
Oh I also tried restoring my phone and starting all over again. That didn't work either!
Maybe you are looking for
-
Mixing a 1GB memory (DDR3 1067Mhz) with a 4gb (DDR3 1333MHZ)
hi there i currently have 2gb (2x1) ddr3 1067mhz on my macbook pro. I'm thinking of upgrading it to 5gb, so I would take off one of the 1gb memories and insert a 4gb one. problem (?) is, the 1gb memory is 1067 and the 4gb one is 1333. when I asked th
-
My ex-boyfriend stole my email address and credit card information to make purchases with Apple and now my Apple ID has a balance. Is there any way I can retract the purchases so I don't have to pay for his theft? I had no idea he had done this until
-
Relocating objects into new tablespace?
I was looking for an easy way to relocate all objects from one table space to another table space? Is there a utility or any way to have all objects in one table space move to a new tablespace with out have to either move or rebuild each object one a
-
Auto fit columns in excel using open xml
I have generate excel using open xml and it contain auto fit property for columns. my problem is that the excel is opening very well in kingsoft spreadsheets and other tools, but not opening in microsoft excel 2013 and older version. Is there any sol
-
Downloading and installing whatsapp
My asha 503 dual can't download and install any apps