Problem  facing in LSMW ......

I am facing a problem in LSMW . While creating ..... in the very first step( i.e., among 13 steps,that is in Maintain Object Attributes) when i executed .....other window is opening where i have checked BATCH INPUT RECORDING ....in that i have given recording name as ZVIJAY.....After giving, when i clicked recording overview....it is giving an error as NOT A VALID VALUE in the bottom scrollbar of the Screen.....WHY??? .... (I have given project name , object and also sub project name correctly)
                                 Thanks in Advance ........

It is because the name of the Recording which you have given in the before step is different from "ZVIJAY" which you have entered now... Change either of the value to proceed.
Regards,
Pavan

Similar Messages

  • Problems faced by me using the 5700

    I bought the nokia 5700 a month ago and it has been this way since then. I face a few problems which i wish were added in a update for the firmware by nokia. Is there anyway to inform nokia about this?
    Problems faced by me:
    1)In the log after switchin the mobile on and after about a day or two when i call from the log i.e pressing green button on a contact or going into options and selecting voice call. Nothing happens. No call can be made from the log. It is very annoying cause everyone directly calls from the log upon seeing the miss call... Though the call can be made from the contacts list and everywhere else, u can dial a number and call. The problem is just with the log(fixed by turning the mobile off then on but eventually the same thing happens)
    2)The time and date when set as a screensaver does not appear all the time, the screen maybe blank or time maybe shown.
    3)This is going to be very weird, i have a habit of just seeing emergency numbers such as 911 and 112 appear when the phone is locked, when i dial these keys sometimes the numbers appear and sometimes they dont.(again fixed by turning the mobile off then on)
    4)This is the BIGGEST FLAW FOR THE 5700 FOR ME, if you have noticed (i dont know abt other 5700's but this is the case with mine) in the log if you have contacts having numbers which can be divided into home ,mobile,etc. When you see the log no matter wherever the call came from you see a mobile icon.This again is very annoying cause you dont come to know where the call came from and after a miss call, u would have to go in options, use number, edit number and then see it. Or by calling and seeing the number for a brief moment. So you can accidentally dial at someones home though you dont want to and even they didnt call from their home.
    Anyone having these problems?
    Nokia 5700 has been out for 3 months over here i guess we deserve updates for the firmware. Dont we?
    And though i get these problems i can still say with dignity that 5700 is cool.
    btw If i format do i lose any themes installed on the phone memory? Cause i downloaded this theme from nokia once and you dont get it any more for some odd reason.

    Go to Nokia Service nearet your location. Ask them for a solution.

  • TWO VERY TOUGH SUPPORT PROBLEMS FACED AND SOLVED IN REAL TIME

    pls any body post two very tough support problems faced and solved in real time.
    my id is: [email protected]

    Hi Priya.,
    For example client wants his customer legacy number in XD01 master data which is not there in Standard SAP.we can satisfy the requirement with USER EXIT
    2) If the client wants customer Phone number in the sales order we can use user exit to satify the requirement
    These are not provided in Standard SAP & we should work out on alternative way
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • Problems Facing in BDC

    Hi All,
             I want to know the problems facing in Uploading Xternal file in BDC.
    Its very Urgent . Points will be rewarded to good ans.
    Bye.

    Hi
    Many problems can occur while doing bdc like field mis match can occur,Data over lapping between fields etc
    Regards
    Shibin

  • My iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. s

    my iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. switched off my phone but on without power button . what is the problem?
    Thanks
    s.m slim

    all iphone is same like that

  • Can i get some live problems faced on support for sap hr

    Can i get some live problems faced on support for sap hr and how were they resolved? Please give a step by step detail of the sol.
    Dear
    Member,  of all the  Issues raised in the forum some of the issues are support issues you can have a look at all these threads
    Please read the forum rules before Posting the Query

    Hi,
    Please be with this SDN.SAP Forum, you will get solutions of all types of queris.
    Regards,
    Ram Aware

  • Problem facing in sender file adapter

    Hi XI gurus,
    I am facing a problem in sender file adapter communcation channel
    Is there any restriction in XI that XI picks max of 100 at a time .
    Actaully probolem here is My XI sender file adapter need to pick 2800 file from ftp.
    adapter need to file pick files ranging SAP_OUT_066581_280_INV.xml to SAP_OUT_SZ22TXN066581_2800_INV.xml
    to pick these we have given file name as u201CSAP_OUT_*_INV.xmlu201D when ever given this XI is coming with no messges.
    when ever file name is given as SAP_OUT_SZ22TXN066581_3*_INV.xml it XI has picked file from 300 to 399
    when eve tried with the options to pick all the message
    SAP_OUT_SZ22TXN066581_*_INV.xml  Failed with no messaege
    even atleast tried to pick 1000 mesaanges from 1000 to 1999
    i have given like this
    SAP_OUT_SZ22TXN066581_1*_INV.xml failed with no messages
    while trying with option xi picking file max 100 at a time
    SAP_OUT_SZ22TXN066581_1*_INV.xml
    SAP_OUT_SZ22TXN066581_11*_INV.xml
    SAP_OUT_SZ22TXN066581_12*_INV.xml
    like this I am increaing the number and picking maximum of 100 messages only
    Is there any way to auto mate this or nny file names need to be required
    waiting for your reply

    Check SAP Note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter.
    I guess point 8 might relate to your problem if the FTP adapter timeout occurs.
    check the note 849089 as well.
    Also check point 13 and 26.
    Gaurav Jain
    Points if answer is useful
    Edited by: Gaurav Jain on Jun 6, 2008 4:20 PM

  • Rep-0756 problem facing while opening the report in 10g

    Hi,
    I am facing problem while opening RDF in oracle 10g.
    I follow the next steps.
    1. Open the RDF in 10g.
    2. Open the PLL in report builder and compile that PLL and save in same path where report located.
    3. reattach the library with RDF.
    4. Close the RDF
    5. Reopen the RDF and facing the error.
    6. REP-0756- unable to open attached............
    7. I set the report_path in Registry also where PLL exists
    Please give me the solution for this problem
    Waiting for quick reply.
    ashok

    Thank you fs,
    I am also facing the similar issue in reports 10g, I am keeping the .pll file in my local machine say c:\me\reports\xyz.pll. When I am opening this pll, I am getting the error REP-0756 though the path 'c:\me\reports\' is added to the REPORTS_PATH. Your suggestion resolved the issue.
    Many thanks,
    Lokesh.

  • Problem faced in form while deleting a record-urgent

    we r in the testing stage of our project. we are facing a major problem. In one of the forms deletion is not working.
    we did migration from 6i to 10g. we migrated using migration assistant.
    in 6i code was working fine.
    in 10g record is not getting deleted from database and an error is shown as FRM_40510.
    We used the following code.
    if :BLK1_OBLIGOR.OBL_TNX_TYPE = 'D' then
    delete_record;
    kcheck_failure;
    else
    DO_APPRV;
    end if;
    commit_form;
    kcheck_failure;
    can u pls point out the mistake

    Hi,
    Code exists in pre-delete trigger as follows
    DELETE FROM grr_OBLGR_DATA
    WHERE grr_OBLGR_DATA.OBL_CAGID = :BLK1_OBLIGOR.OBL_CAGID AND
    grr_OBLGR_DATA.OBL_cntry_code = :blk1_OBLIGOR.obl_cntry_code;
    The delete allowed property for that block is set to 'YES'.
    Pls do help me to find out the problem. The issue is that the same code is working fine in 6i. The trouble is in 10g. Pls do advice me.

  • Problem facing installing Solaris 10 on Dell inspiron 6400.

    Hi,
    I am facing problem in installing Solaris 10 on my Dell inspiron 6400.
    It is giving "cannot find driver for screen device /isa/motherboard@1,61" error.
    Please help...
    Thanks In Advance
    Saurabh

    Hi all,
    I've also the same problem, I tried the 11/06 but after GRUB , it hangs. HereBelow the HCL.
    No Solaris Driver
         No Solaris Driver
         Multimedia
         Intel Corporation
         82801G (ICH7 Family) High Definition Audio Controller
    No Solaris Driver
         No Solaris Driver
         Network
         Intel Corporation
         PRO/Wireless 3945ABG Network Connection
    Solaris 10 11/06
         Solaris 10 11/06
         Firewire
         Ricoh Co Ltd
         Unknown device
         hci1394
    Note-1
         Note-1
         Network
         Broadcom Corporation
         BCM4401-B0 100Base-TX
         bfe
    Solaris 10 11/06
         Solaris 10 11/06
         Video
         Intel Corporation
         Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
         vgatext
    Solaris 10 11/06
         Solaris 10 11/06
         Storage
         Intel Corporation
         82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE
         pci-ide
    Solaris 10 11/06
         Solaris 10 11/06
         USB
         Intel Corporation
         82801G (ICH7 Family) USB UHCI #1
         uhci
    Solaris 10 11/06
         Solaris 10 11/06
         USB
         Intel Corporation
         82801G (ICH7 Family) USB UHCI #2
         uhci
    Solaris 10 11/06
         Solaris 10 11/06
         USB
         Intel Corporation
         82801G (ICH7 Family) USB UHCI #3
         uhci
    Solaris 10 11/06
         Solaris 10 11/06
         USB
         Intel Corporation
         82801G (ICH7 Family) USB UHCI #4
         uhci
    Solaris 10 11/06
         Solaris 10 11/06
         USB
         Intel Corporation
         82801G (ICH7 Family) USB2 EHCI Controller
         ehci

  • E5 six problem faced in last 6 months!

    Dear All, 
    Before I start sorry for my english.I bought a nokia e5 approx 6 months before. Untill now I have faced many problems with the handset. I alreday owns a nokia 5320 express music. And when i Compare these two handsets I think I have made a big mistake buying e5.
    Problems I faced from the day one...
    1) Recieved faulty headphone. One speaker was not working. Nokia made me wait 1and half month to replace.( why nokia dont provide on spot replacement for accesories?)
    2) When I plugged in the headset and removed, the cell used to remain in the headphone mode. i reported this problem to nokia care centre. they repaired but wen i recieved my handset next day i Found new problem.
    3) third problem was after headphone error repairing when i used to type z key handset used to type it y. nad vice versa. Nokia care took another one day to solve the problem.
    4) Usually i carry both my handsets. E5 and 5320. I dont know but if some how E5 loose network coverage its is very difficult and tedious to retrieve it automatically. i have tried this in the same return journey by exchanging handset. Found 5320 more superier than E5.
    5) Sometimes even if Ihavent kept E5 on charging, the phone shows the message "please unplug the chrager.........."
    6) sometimes even after pressing green cal key to see call history, nothing happnes.
    7) from yesterday i am facing new problem. the screen turns white and phone gives a message insert sim card. and phone needs to restart.
    this problems has made me to think about other company produts in the market and i dont think my next handset would be nokia.
    Please help me if anyone has solutions over this problem! 

    Sorry to hear about your problems. Accessories have 6 months warranty, if its not working/faulty you can get it replaced.
    Just blow the headphone connector with air or gently clean it with a brush with soft bristles, there is a chance of dust getting deposited on the port making it to show  headphones symbol.
    Your growing problems shows signs of a faulty handset may be you can try some other Nokia care center in your place and get it checked?
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • Problem faced when automating the P.O and P.O Release transactions

    Hi,
    I was trying to automate the Purchase Order and Purchase Order Release screen using ECATT tool.
    I recorded the Purchase Order screen by importing the Purchase Requisition Number.
    When i record the Purchase Order screen, the screen settings was different and when i was replaying the script, the settings was different.
    The Problem which i faced was when i was recording the Purchase Order transaction, the header tab was in the expand status.But when i execute the recorded script, the header tab gets collapsed. Because of this change, the Purchasing Org tab value is not passed and it throws an error.
    Please help me to find a solution for this problem.
    The same happens in Purchase Order release transaction.
    When i am recording the Purchase Order Release transaction, the Release Strategy tab is active and when i am replaying the script which i have recorded, it is not the same of what i have recorded.
    Therefore, it throws an error.
    Kindly help me to get a solution for the problem

    Can u help me in doing this.
    I have not done any script using this Conditional loop. Help me to do this..
    If u also have any documents related to this Conditional loop, kindly let me know the links..
    Hope u will help me to find a solution.
    Regards,
    Shriram.S

  • Problems faced when using xsl:include and extension functions

    I am Working in XML and XSLT using Oracle's XML Parser V2.
    Previously i had worked in Microsoft technology using MSXMLParser.
    I am facing some problems in XSLT. They are as below...
    1. Using <xsl-include href="Somexsl.xsl">
    the oraclexmlparser processor is giving the error : XSL-1002: Error while processing include XSL file (no protocol: Submenu.xsl).
    * Can u tell me why i am getting this error, and what is the fix for this.
    The same case with <xsl:import> too.
    2. In case i have to write some functions in the previous WD of xsl i used these statements
    <?xml version='1.0'?>
    <!DOCTYPE PageRoot SYSTEM "../../Common/dtd/PageNavBar.dtd">
    <xsl:stylesheet
    xmlns:xsl="http://www.w3.org/TR/WD-xsl"
    xmlns:html="http://www.w3.org/TR/REC-html40"
    result-ns="">
    <xsl:script xmlns:xsl="uri:xsl"><![CDATA[
    var strWebContentPath = "/SurSITE/Content/";
    var strWebImagePath = "/SurSITE/sursitegraphics/";
    function IncScript()
    return "<script language='javascript' src='/SurSITE/Includes/avalidations.js'></script>";
    ]]>
    </xsl:script>
    To call the function i used this
    <xsl:eval no-entities='true'> IncScript();</xsl:eval>
    * Can u tell me how do i do this now, i tried with the code above using the current name space (<xsl:stylesheet version="1.1"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform" />)
    Please use the example given above.
    I will be very greatfull to u if u can give me some suggestion or help for the above said problems.
    Thanking you and eagerly waiting for your reply(s).
    null

    The current version is "1.0" not "1.1"
    You haven't included the code for what your <xsl:include>
    statement looks like, which seems to be what it's complaining
    about...
    XSLT 1.0 has no <xsl:eval>, this is a microsoft specific tag
    from a pre-XSLT-1.0 version.
    XSLT 1.0 has no <xsl:script> element either.

  • Problem in Transporting LSMW project

    Hi,
    We created LSMW project in development environment. Then we created Transport request through menue <b>Extras -> <u>C</u>reate Change Request</b>
    We successfully transported this request to test environment. When status is checked through STMS_IMPORT everything was fine. However when we tried to open project through LSMW, it didn't exist.
    Can anyone suggest, what could have gone wrong ?
    Nishad

    Hi,
    if your problem is not allready solved.
    You can not transport LSMW-Project - I do not know what this icon is for.
    You have to export the project and than import on the new system.
    use these icons.
    best regards

  • Problem faced in viewing SVG elements in IE 7 in windows 2003 server machine

    Hi All,
    We are using SVG to use graphics elements in web page for our product. The web page contains HTML+SVG elements.
    If we use an HTML Image element in our web page display and if we draw or configure SVG elements like rectangle or circle over the image element, then on viewing it in browser, the html image element overlaps the SVG elements and they get hidden behind the image.
    Please help us in resolving this issue.
    This scenarios works fine if we use browser IE7 in windows XP machine.
    But on using IE7 in windows 2003 server machine, the problem is faced.
    We have tried all possible and valid IE settings and properties to make the display work. But its helpless. The SVG plugin is also installed properly on systems. But still the display is not as intended.
    I have attached the working scenario screenshot and non working scenario screenshot
    The screenshot here contains an html image which is showing text as Incom tax department and on top of it is SVG element rectangle. This is viewed in Windows XP in IE 7 browser
    This screenshot contains the same page above but when viewed in Windows 2003 IE 7 browser. The SVG rectangle is overlapped by the html image element here
    Kindly please help us in this regard as we are unable to proceed further with this issue. If anyone of you have face this before, then please help us on the resolution. We will be very grateful
    Thanks a lot.
    Regards,
    Shwetha

    If you are using Dreamweaver to create your webpage, please post in the Dreamweaver forum. If you are hand-coding you might try posting in the Web Design forum. This forum is for help using the forums not for general tech support.

Maybe you are looking for