Problem for releasing blocked sales order on Creditlimit

Hi Gurus,
        I a   hve a problem for releasing blocked sales orders
         what i have done: 1)i have blocked sales order based on exceeded creditlimit
         (i have change SDType in 'OVAK' is 'C')
                  2)now i have to release for furthur processing so i have done following steps
                  3)Goto VKM3/VKM1 T.Code and then release what order that is blocked.
                  4) order will appear in the list.
                  5)Select that one.
                  6)Click on the green flag that appears on the left hand side.
                  7)Click on save.
                  8)click on back it will ask for "Leave list".
                  9)Click on yes.
                  10)It said that Sales orer has been released
Still what my problem is:
Problem: 1)So i'm trying to create deliver for Sales order but it shows an error
         2)"Sales order is blocked for delivery: Credit limits" Even it was released
Plz kindly help me what i do....
Thanks In Advance
sivakumar

sorry i was unfotunately put this thread here over in SD

Similar Messages

Releasing Blocked Sales Order

Hi All,
I need to create a report to show who released blocked sales order, The TCode for releasing sales Order is VKM1. I want to know after releasing order where this information gets stored. the changed person and the order values.. where I can find this information..
Thank you,

Hi ,
try to go thru all other posts also , then only it wil justify what we are doing here for u?
have u seen VBUK-CMGST =Overall status of credit checks
 Credit check was not executed/Status not set
A Credit check was executed, document OK
B Credit check was executed, document not OK
C Credit check was executed, document not OK, partial release
D Document released by credit representative
Regards
Prabhu

Report : release blocked sales order

hi ,
Can nyone tell me. how to see report regarding ....who's( which user) released the blocked sales order?

hello, friend.
when you create a list using VKM4, you can click on a specific sales document number. you will be brought to the document. then you can click on Menu > Environment > Changes and see the person who released the order.
you can also see the release date by doing SE16 and selecting table VBAK. i'm not sure but i think its possible to see the person who released by going to another table. maybe somebody else can clarify.
thanks and regards.

How to have confirmed quantity 0 for credit blocked sales orders

Hi!
I have the following problem. I have one sales order blocked because credit. Using material A the quantity confirmed is 0 but using other material B the quantity is confirmed. All the materials have no avaliability check group no arelevant for vailability .
How can I customize in order to always have quantity confirmed in 0 for sales orders bloked because credit check?
Thanks in advance for your help!
Regards,
Marina.

I resolved the issue

MRP Run For Credit Blocked Sales Orders

Hi
Does any one know how to prevent the generation of planned orders for Sales orders which
have been credit blocked. At the moment the reservation is still visible on MD04 and is therefore
planned during the MRP run. As a result manufacturing continues for these sales orders.

As far as credit block is concern; what it means is that delivery will not be done for this customer via VL01N.
This means if you have blocked this customer in FD32; no delivery to be done
It may not be linked with MRP calculation b'cos it comes into picture while doing delivery & not during planning
Rgds

Release Strategy for releasing in Sales Orders by Individual/Jointly

Hi,
Is there any release strategy of Customers by single/multiple persons for releasing Sales Orders? If yes give me the detailed configuration.
Regards
Sudhakar Taduvai

Hi;
In std. you do not have release strategy but you can use following option;
Configure two schedule lines like CP- MRP relavant & BN- Not relavant to MRP.
By default BN will appear & as release user will change the schedule line.
This way you use like release.
Regards;
Avinash

Workflow for releasing blocked purchase orders

Hi,
We want to implement a workflow for financial approval of purchase orders. At the moment a purchase order exceeds a certain value, the order will be blocked and approval is needed from the responsible cost center manager. As we are completely new to workflow, is there some one that can help me with my questions below?
1. Is there a standard workflow in SAP (ECC6.0) that supports the above process?
2. What are the trigger points for this workflow (creation and change of PO?)
3. What are the required steps to set up this workflow.
Regards,
Ed

hi,
You can set up your workflow while you setup your release strategy..Before you do this you have to use authorisation in order to assign the role to a special person, in your case cost centre manager and follow on with your release strategy...
Creation n changibity will depend on the changability indicator defined under release indicator set up...
where you can choose as per your req. for eg 4, 5 or 6 etc...
you also take help of BI consultant if req....
Also you can find may threads reg. Workflow into SDN...
Regards
Priyanka.P

How to Release the blocked Sales orders?

Hi Gurus,
Requirement: To Release the Blocked Salesorders
problem: find out any Tables and procedure to release blocked SO(allow to creating delivery for SO).
how to Customer CreditLimit and Tables of Theses...............
Thanks in Advance..
sivakumar.kasa

Hi..
AS per i knew......
how to know cutomer CreditLimit?
FD32,FD33...tcodes
how to release blocked Sales order?
VKM3
Wait for some other views

Work- flow blocked sales order

Good evening to u all.
I wanna know whether there is any standard work flow in SD for the blocked sales orders (For any sort of reason) ? So that the authorised users will receive an email once the sales order is blocked due to certain reasons.
<removed by moderator>
regards,
satish
Edited by: Mike Pokraka on Aug 4, 2008 10:45 AM

Hi,
I dont think that there would be any Standard workflow
available that matches your requirement but surely you can
create one workflow according to your requirement
check the object 'SalesOrder' otherwise you could take a copy
of that and create a method which fetches all the blocked
sales order from the table and triggers a mail according to your
requirement.
Kind Regards
Hari Sankar M

Release log for blocked sales order as credit limit

Hi gurus,
Any body kindly explain for me about how can I look over Release log for credit limit block sales order, Transaction code or report?
thanks.

Hi,
u r trying all these in IDES system or in real time system.
if u r trying to release it in IDES system then go to VKM2 & do the changes.
in real time system only a authorized person can release the block by using the same T.code vkm2.
hope it helps u
regards
dibya

Bapi For Blocked sales orders & Bapi for Releasing those orders

Hi All,
Can anybody help me regarding Bapi for getting Blocked sales orders and bapi for releasing those sales orders..
Any help will be rewarded...
Thanks..
Regards,
Srinivas.

Use bapi:
BAPI_SALESORDER_GETLIST to get the list of all sales orders based on Parameters
CUSTOMER_NUMBER
SALES_ORGANIZATION
MATERIAL
DOCUMENT_DATE
DOCUMENT_DATE_TO
PURCHASE_ORDER
Then,
loop at the internal table
and use the bapi BAPI_SALESORDER_GETSTATUS to get the status of each sales order.
choose only which are blocked.
Regards,
ravi

Workflow for blocked sales orders

HI all,
I have a requirement in sales in service order .
when a credit check is done for a customer ,sales order will get blocked and
in the service order for the corresponding sales order will get a status with Not OK. To release the block on this we need to manualy change the status in VKM3 and subsequently in service order (IW32).
My requirement is to do automatic change in the service order status when ever we do release the flag in VKM3.
I think with work flow we can achieve this.
Any standard functionality is supported using workflow for this requirement?
Please help me how to proceed.
Thank you all..

Hi Ravi,
Yes this is possible using workflow!
I just simulated your scenario and there are no events when you release the sales order but the other good news is that there is a change doucment that is written. The field CMGST in the table VBUK gets updated with the value D which is "released by credit representative". Using this you can configure your own event.
However to do this following are the steps you would have to follow:
1. Copy the business object BUS2032 to ZBUS2032 through transaction SWO1.
2. Add an event called as "Released" to this.
3. Generate this new copied version of the BO
4. Delegate the copied Business Object to BUS2032. You can do this in the initial screen of SWO1 by going to the menu "Settings->Delegate". This is the inverse of inheritance through which you will be adding the properties of the subtype(ZBUS2032) to the main type(BUS2032) at runtime
5. Use transaction SWED and SWEC to configure your own event and raise it when the change document is written. Do remember that you will have to put an entry in the "Field restrictions" table in the transaction SWEC to trigger your own event when the Sales Order is released.
6. In transaction SWEC you can put in the change document object as "VERKBELEG" derived from CDHDR table. The business object as BUS2032 and the new event you created in the subtype. Since you have delegated the same it will be available for use for the main type.
7. In the field restrictions put in the table as VBUK and the field CMGST and the old value is * and the new value as D.
8. Once you do this the event will be raised once you release the sales order.
9. You can check the same through the event trace SWEL(Remember to swtich on the event trace through SWELS if it is off)
10. Now you will have to write a function module to change the status of the service order using the OBJNR of the service order and table JEST or use the standard function module STATUS_CHANGE_EXTERN. Please remember that you can change a User status because system statuses are changed by the system. However you can change the system status by updating the table but I guess that is not like how the system changes it. When the system itself changes the status then there might be certain follow on documents that are created.
12. Now you will have to encaspulate this FM in a method of the business object.
13. You will have to use the ZBUS2032 to add your own method which calls this function module. Hope you have the reference to the service order from the sales order.
14. Now have a task or a workflow which has a single step which inturn calls this method and trigger the workflow or the task using the event.
That might solve the problem you have
Best regards,
Sudhi

Block sales order for credit check

I have created 1 sales order. I want to know how we can find out that sales order is in block.
Also I want to block the sales order created for credit check . What I can do that sales order will go in block.

Hi KiranCG,
--For Credit check go to T.Code FD32 & give customer number & Credit control area & enter the credit limit amount & save it.
-Do the Cutomization for Credit Management
IMG-S&D-Basic Functions-Credit Management & Risk Management-Credit Management
--Define Account groups
--Assign the credit group (01) to your Sales Document type.
--Define Automatic Credit Control (or) T.Code OVA8 Assign CCARisk categoryCredit group -01 (Sales Order) & also Fill the required fields
--In Check column Check mark the Static or Dynamic credit & put reaction as C & check mark the status/block & save it.
--Now raise the sale order in VA01 if the credit limit exceeds the system will through you an error message.But you can still save the document.
--Go to T.Code VKM1 to view the Blocked sales document & enter Credit Control Area,Credit account,Risk category& customer credit group.
--.In order to release the Sales order document go to T.Code VKM3
Let me know if your problem is solved
Regards
Pradeep

Automatic credit release of blocked Sales orders with pre payment

Hi ,
We have a requirement as given below.Please suggest a better solution for this.
The customers have the 'prepayment ' payment terms with different percentages of the sales order
value to be paid before the delivery creation.
When the sales orders are created, they are blocked for delivery by some credit block.
The business use VKM1 transaction to view these blocked orders and release them manually for
delivery creation after checking if the customer has made the prepayment.This is a tedious work
(since there are too many sales orders )for the credit manager who dont have the complete
visibility of how much prepayment the customer has made and need to manually check if the
payment made covers the sales order prepayment amount to be paid.
1. How can we do a automatic release of these blocked sales orders?
2. Is there any program(which can be setup as batch job) to do a credit recheck and release the order
automatically?
3. Will Milestone billing plan functionality satisfy this requirement?If so how?
We are using SAP version 4.7 without Project System.
Thanks in advance.
Regards,
Ragesh

Hello,
This is not possible because when you created the sales order it has checked the credit limit for that credit limit and if you increase also now that block cant go automatically.
Go to VA02 i.e change mode of sales order and change something and enter may be if you created a order for 2 quantity then go to VA02 and remove the quantity 2 and again type 2 then system will again check for credit and now that is increased so the order will not block..
If this is for many order then you can run changes sales order BAPI for mass update. Take help from ABAP guys.
Cheers
Say

Workflow in the releasing of Credit blocked sales orders.

Hi All,
My Client requirement is that they need workflow in the releasing of credit blocked sales orders.
If once sales order is blocked then it should be approved at 3 levels, then only it should be released.
Suggestions are highly appreciated
Regards,
Kumar

Hi Kumar,
I think you can achieve this by using Authorization Concept.
Please find the below link
http://help.sap.com/saphelp_nw04/helpdata/en/52/671285439b11d1896f0000e8322d00/content.htm
Authorization levels for Credit Rep Groups
Thanks
Dasaradha
Edited by: dasaradha ramireddy on Nov 28, 2011 12:53 PM

Problem for releasing blocked sales order on Creditlimit

Similar Messages

Maybe you are looking for