Problem getting parameter values at the service end point
I am having problem getting parameter values at the service end point. I created service end point and this method is having 35 parameters and then i created test client file using Sun One Studio 5. but when i run this test client and make a call to service it sends wrong value to first three parameters to the service end point. I tried all the way round but it gave me same sort of problem. I change the order of parameters change the names of parameters but it didn�t work. And then i started chopping of parameter from the left side. And my problem is solved when my parameter list reached to 12 from 35. So is it a bug or some problem with my configuration or some thing else.
I am using sun one studio 5 with sun one app 7. My service end point does very simple thing. It only takes out put of the parameter to the server log file. And my wsdl file seems all right. There is no conflict with the count and data type of the parameter information it contains.
� Service End Point Definition (in EJB)
public java.lang.String setNewAddress(java.lang.String propertyName, java.lang.String status, java.lang.String PMSCode, java.lang.String streetNumPrefix, int streetStartNum, java.lang.String streetStartNumSuffix, int streetEndNum, java.lang.String streetEndNumSuffix, java.lang.String streetName, java.lang.String streetType, java.lang.String streetSuffix, java.lang.String localityPrefix,java.lang.String localityName, java.lang.String postcode, java.lang.String stateCode, java.lang.String countryCode, java.lang.String description, java.lang.String coordinateAccuracy, int longitude, int latitude, java.lang.String planNumber, java.lang.String lotPrefix, int lotNumber, int siteID, java.lang.String countryName, java.lang.String parishName, java.lang.String section, int portionNum, int crownAllotNum, int titleVol, java.lang.String folio, java.lang.String esa, int aliasID, int aliasTagID,String ID) {
System.out.println(propertyName);
System.out.println(PMSCode);
System.out.println(streetNumPrefix);
........ taking printout of all the paramters
� This is my WSDL file
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="NMService" targetNamespace="urn:NMService/wsdl" xmlns:tns="urn:NMService/wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types/>
<message name="NMServiceServantInterface_setNewAddress">
<part name="String_1" type="xsd:string"/>
<part name="String_2" type="xsd:string"/>
<part name="String_3" type="xsd:string"/>
<part name="String_4" type="xsd:string"/>
<part name="int_5" type="xsd:int"/>
<part name="String_6" type="xsd:string"/>
<part name="int_7" type="xsd:int"/>
<part name="String_8" type="xsd:string"/>
<part name="String_9" type="xsd:string"/>
<part name="String_10" type="xsd:string"/>
<part name="String_11" type="xsd:string"/>
<part name="String_12" type="xsd:string"/>
<part name="String_13" type="xsd:string"/>
<part name="String_14" type="xsd:string"/>
<part name="String_15" type="xsd:string"/>
<part name="String_16" type="xsd:string"/>
<part name="String_17" type="xsd:string"/>
<part name="String_18" type="xsd:string"/>
<part name="int_19" type="xsd:int"/>
<part name="int_20" type="xsd:int"/>
<part name="String_21" type="xsd:string"/>
<part name="String_22" type="xsd:string"/>
<part name="int_23" type="xsd:int"/>
<part name="int_24" type="xsd:int"/>
<part name="String_25" type="xsd:string"/>
<part name="String_26" type="xsd:string"/>
<part name="String_27" type="xsd:string"/>
<part name="int_28" type="xsd:int"/>
<part name="int_29" type="xsd:int"/>
<part name="int_30" type="xsd:int"/>
<part name="String_31" type="xsd:string"/>
<part name="String_32" type="xsd:string"/>
<part name="int_33" type="xsd:int"/>
<part name="int_34" type="xsd:int"/>
<part name="String_35" type="xsd:string"/></message>
<message name="NMServiceServantInterface_setNewAddressResponse">
<part name="result" type="xsd:string"/></message>
<portType name="NMServiceServantInterface">
<operation name="setNewAddress" parameterOrder="String_1 String_2 String_3 String_4 int_5 String_6 int_7 String_8 String_9 String_10 String_11 String_12 String_13 String_14 String_15 String_16 String_17 String_18 int_19 int_20 String_21 String_22 int_23 int_24 String_25 String_26 String_27 int_28 int_29 int_30 String_31 String_32 int_33 int_34 String_35">
<input message="tns:NMServiceServantInterface_setNewAddress"/>
<output message="tns:NMServiceServantInterface_setNewAddressResponse"/></operation></portType>
<binding name="NMServiceServantInterfaceBinding" type="tns:NMServiceServantInterface">
<operation name="setNewAddress">
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></output>
<soap:operation soapAction=""/></operation>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/></binding>
<service name="NMService">
<port name="NMServiceServantInterfacePort" binding="tns:NMServiceServantInterfaceBinding">
<soap:address location="http://localhost:80/NMService/NMService"/></port></service></definitions>
� I followed steps given this example. http://developers.sun.com/prodtech/javatools/jsstandard/reference/docs/s1s5/stockapp.html.
If some one know what is wrong. Is it me or some thing wrong with the method I followed. But I am sure that I followed exactly the same method as it given in examples. So if some one can guide me
Thanks
I just found that there is a bug with Sun One Studio 5. It creates faulty JSP file to test the client for the web services. With above problem I tested my web services using different developing environment such as Jdeveloper 10g. I created client stub using wsdl file generated by sun one studio. And made call to my web service and all the parameter reached perfectly at service end point. And then I used stub class created by sun one studio for the client and made the same call. And it also went well. So the problem is with the test application (JSP File) sun one creates for my web service.
This is the majore problem i faced during the development. But still there is many problem along with this which is not seriouse enough but requires attension. I would like sun developers to make sun one studio IDE simpler and handy .
Similar Messages
-
Getting iBrowser values in the front end using function
I have created the iBrowser by setting the value to Datalink for defaultitem in iBrowser and i tried to get the values of the iBrowser using function as
function value=Applet.getBrowserObject().getselecteditem();
but it doen not displays any values in browser field in the front end.
Please help me how to get values in the browser.
Thanks,
Rajendra.Rajendra,
You change the function as below and try
function value=Applet.getBrowserObject().getselecteddatalinkvalue();
maybe this works in your case.
Thanks,
Nagi -
How to Get Parameter Values from the URL ?
Hi,
I have built a calendar called cal_test. I am calling this calendar with this URL:
http://.../pls/.../xyz.cal_test.show?p_arg_names=p_sc_id&p_arg_values=2&p_arg_names=_start_date&p_arg_values=FEB-2002
In the 'Additional PL/SQL Code' tab of cal_test, I need to call a procedure which requires me to pass in as parameters the values of p_sc_id and startdate embedded in the URL named above. How can I retrieve these 2 values from the URL ? Any advice will be appreicated !
DorothyHi Daniel
The following thread might help;
if not, you could try posting the question in Application Server » Web Dynpro Java
Thanks
Kenny -
HTTPBC POST does not contain any values on the recieving end.
I have a BPEL which reads the content of a file as String and send it to a Servlet using the HttpBC Post method.
But when I want to get this value on the recieving end (The Servlet), the httpRequest object is empty and it returns Null value?
If I do the same thing using HttpBC Get method, it works fine (I can't use the Get method because the content of the file is sometimes too long, and for that reason I HAVE to use the Post method).
I was just wandering where the Object is, when I use the Post method? How do I have to read the httpRequest object if I used the Post on HttpBC?
Thanks in advance.
Here is more info about my code:
The WSDL:
<?xml version="1.0" encoding="UTF-8"?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
targetNamespace="caPostOverHttp"
xmlns:tns="caPostOverHttp" xmlns:ns="http://j2ee.netbeans.org/wsdl/bpPostOverHttp/wsdlABSFile" xmlns:file="http://schemas.sun.com/jbi/wsdl-extensions/file/" xmlns:ns1="http://j2ee.netbeans.org/wsdl/bpPostOverHttp/wsdlError" xmlns:ns2="http://j2ee.netbeans.org/wsdl/bpPostOverHttp/wsdlHttp" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:fi="http://java.sun.com/xml/ns/wsit/2006/09/policy/fastinfoset/service" xmlns:tcp="http://java.sun.com/xml/ns/wsit/2006/09/policy/soaptcp/service" xmlns:wsp="http://www.w3.org/ns/ws-policy">
<import namespace="http://j2ee.netbeans.org/wsdl/bpPostOverHttp/wsdlABSFile" location="../jbiServiceUnits/bpPostOverHttp/wsdlABSFile.wsdl"/>
<import namespace="http://j2ee.netbeans.org/wsdl/bpPostOverHttp/wsdlHttp" location="../jbiServiceUnits/bpPostOverHttp/wsdlABSHttp.wsdl"/>
<portType name="dummyCasaPortType"/>
<binding name="casaBinding1" type="ns:wsdlABSFilePortType">
<file:binding/>
<operation name="wsdlABSFileOperation">
<file:operation verb="poll"/>
<input name="input1">
<file:message fileName="EP.xml" pollingInterval="1000" part="file_IN"/>
</input>
<output name="output1">
<file:message fileName="output.xml" part="file_OUT"/>
</output>
</operation>
</binding>
<binding name="casaBinding2" type="ns2:wsdlHttpPortType">
<http:binding verb="POST"/>
<operation name="wsdlHttpOperation">
<http:operation location=""/>
<input name="input1">
<http:urlEncoded/>
</input>
<output name="output1"/>
</operation>
</binding>
<service name="casaService1">
<port name="casaPort1" binding="tns:casaBinding1">
<file:address fileDirectory="C:\Temp\input" lockName="filebc.lck" workArea="filebc-in-processing" seqName="filebc.seq"/>
</port>
</service>
<service name="casaService2">
<port name="casaPort2" binding="tns:casaBinding2">
<http:address location="http://localhost:8080/waPollFileToHttp/Process"/>
</port>
</service>
<wsp:Policy wsu:Id="casaBinding2Policy">
<wsp:ExactlyOne>
<wsp:All/>
</wsp:ExactlyOne>
</wsp:Policy>
</definitions>
The Servlet:
public class Process extends HttpServlet {
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
String httpIn = request.getParameter("http_IN"); // http_IN is the string variable used in the BPEL which contains the content of the file. Using Post returns null for this parameter, but using GET it returns the actual value.
System.out.println("SERVLET PROCESS:");
System.out.println(request.getQueryString()); // using POST returns null but using GET returns the actual value.
System.out.println("HTTP_IN:");
System.out.println(httpIn);
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
}you are using request.getQueryString() in servlet to read the content however as per the specification it returns the query string that is contained in the request URL after the path. To read the content of the post request, use getInputStream method or any open source API.
Edited by: Adhir_Mehta on Mar 4, 2010 3:57 AM -
Problem in getting parameter value from selection screen in web dynpro abap
Hi,
I am facing problem in getting parameter value from selection screen.
Please find my code below:
DATA LT_PAR_ITEM TYPE IF_WD_SELECT_OPTIONS=>TT_SELECTION_SCREEN_ITEM.
FIELD-SYMBOLS:<FS_PAR_ITEM> LIKE LINE OF LT_PAR_ITEM,
<FS_OBJ_USAGE> TYPE REF TO data.
WD_THIS->M_HANDLER->GET_PARAMETER_FIELDS( IMPORTING ET_FIELDS = LT_PAR_ITEM ).
LOOP AT LT_PAR_ITEM ASSIGNING <FS_PAR_ITEM>.
CASE <FS_PAR_ITEM>-M_ID.
WHEN `OBJ_USAGE`.
ASSIGN <FS_PAR_ITEM>-M_VALUE->* TO <FS_OBJ_USAGE>.
[ Here, sy-subrc is 4, <FS_OBJ_USAGE> is not assigning.]
ENDCASE.
ENDLOOP.
So, can any one solve this problem.
Thanks in advance,
RadhikaHi Radhika,
Try using GET_RANGE_TABLE_OF_SEL_FIELD...
Please Refer below code..
DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
DATA: RT_CARRID TYPE REF TO DATA.
DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
DATA: WSFLIGHT TYPE SFLIGHT.
FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
Retrieve the data from the select option
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Assign it to a field symbol
ASSIGN RT_CARRID->* TO <FS_CARRID>.
CLEAR ISFLIGHT. REFRESH ISFLIGHT.
SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
WHERE CARRID IN <FS_CARRID>.
NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
Thanks,
Regards,
Kiran -
How do I get a new value for the service name field and update it in Connection Properties?
I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?
When you create a new film script, the first page you see is a title page.
The page after this title page is the one where you generally type in your scenes.
It looks like you are facing some issue and not able to delete any text.
Can you please send me this script so that I can have a better look at your issue?
You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
Thanks -
Setting/Getting Parameter Values BEFORE and AFTER the param window loads
Hi there. My name is William Sanchez. I posted this question on Brian Wheadon's blog because I'm not sure that what we're trying to accomplish can be currently done with 2008 Crystal Report Viewer and was wondering if a future version will support this, or if we're just missing something. I've searched through the SDK and API and can't seem to find a solution. Here's what we're trying to accomplish
In a nutsheel: we think we need to hook into Crystal Report Viewer's parameter window from our WPF app.
What we need to do is to be able to pass a set of default values to our parameters AND, after that's done programmatically, still display the parameter window for the report. Currently, however, after you do:
parameterFieldDefinition.ApplyCurrentValues(currentParameterValues);
it's as if Crystal says: Ok, we got the value, there's no need to show the parameter window anymore. This makes sense, but we need to still be able to show the parameter window to the user because all we did (from our point of view) is to pass in a default "choice". If we were to call ApplyDefaultValues() instead, the actual choices for the parameter are overriden. We basically want to make a default choice for the user from the allowed values for that parameter. But we want to still present the parameter window with the default choice already selected, plus all the other choices available for that parameter. If the crystal report has parameter1 set to false as default, we might want to programmatically set it to true, but still show false as an option on the parameter window.
Part 2 of what we'd like to accomplish is that after the user changes any of the parameter values, and clicks OK to view the report, we'd like to catch the new parameter values in code to do something with them.
This is why we're thinking of hooking into the parameter window so that we can tell it what we want both BEFORE it loads and AFTER the user is done...just like we can hook into the CrystalReportViewer refresh button like this:
CrystalReportsViewer.ReportRefresh += new CrystalDecisions.Windows.Forms.RefreshEventHandler(CrystalReportsViewer_ReportRefresh);
Our app is a WPF C# .NET 3.5 desktop application. Any assistance or direction will surely be appreciated.
Kinds Regards,
William Sanchez
Edited by: wsanchez78 on Mar 31, 2010 1:20 AMGood day Ted, thanks for your reply.
I did try Parameter.Default value, but what it does is as I mentioned above. If I have Parameter1 as a boolean, with possible values of true and false, if I set Paramter1.Default = true, the parameter window does come up, but it removed the false option from the drop down. So this is not a way to pick one of the various values for Parameter1, but to default it to only one of the values. It's close to what we need, but not fully.
Also, what are your thoughts about getting the parameter values after the user has made their changes to the CrystalReportViewer parameter window and click OK to pass them to the report. How can we programmatically get those new values? -
How to get a value from the previous element (XSLT/XPATH gurus ahoy!)
Hi All,
I am building an RTF template for a "letter of reference"-report. Sometimes there are several rows in the data, that need to be printed as one. This is due to consecutive temporary contracts, which will be printed out as one period of service.
Here's a simplified data example to illustrate the problem.
<ROW>
<START_DATE>01-01-1980</START_DATE>
<END_DATE>01-01-1988</END_DATE>
</ROW>
<ROW>
<START_DATE>01-01-1988</START_DATE>
<END_DATE>01-01-1990</END_DATE>
</ROW>
<ROW>
<START_DATE>01-01-2000</START_DATE>
<END_DATE>01-01-2005</END_DATE>
</ROW>
With the data above, I should print two lines:
01-01-1980 - 01-01-1990
01-01-2000 - 01-01-2005
I need to compare START_DATE of an element (except for the first one) with the END_DATE of the previous element, to find out whether to print the END_DATE for that element or not. How can I get that value from the previous element?
Thanks & Regards, Matildause this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01 -
How to get maximal value from the data/class for show in Map legend
I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomouse this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01 -
How to get multiple values from the list
I've a list of an item which I queried it from the database. I also created a button that will takes a selected items from the list when it was clicked. I used javabean to get the data from database.
<% // clicked on Select District Button
Vector vselectedDistrict = new Vector();
Vector vdistrictID = new Vector();
String tmpSelectDistrict = "";
tmpSelectDistrict = request.getParameter("bSelectDistrict");
if(tmpSelectDistrict != null)
// get multiple values from the list
String[] selectedDistrict = request.getParameterValues("usrTDistrict");
vselectedDistrict.clear();
vdistrictID.clear();
if((selectedDistrict != null) && (selectedDistrict.length != 0))
for(int i=0;i<selectedDistrict.length;i++)
vselectedDistrict.addElement(selectedDistrict);
vdistrictID = dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
for(int i=0;i<vdistrictID.size();i++)
out.println("district = " + selectedDistrict[i]); out.println("district ID= " + vdistrictID.get(i).toString());
%>
// get vdistrict from the database here......
<select name="usrTDistrict" size="5" multiple>
<% for(int i = 0; i< vdistrict.size(); i++)
%>
<option value="<%=vdistrict.get(i).toString()%>"><%=vdistrict.get(i).toString()%></option>
<%
%>
</select>
<input type="submit" name="bSelectDistrict" value="Select District">
Lets say the item that i selected from the list is 'Xplace' and I clicked on the Select District button,
what I got is this error message:
org.apache.jasper.JasperException: Unable to convert string 'Xplace' to class java.util.Vector for attribute usrTDistrict: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
So where is going wrong and what the message means?. Any help very much appreciated. ThanksThese are just guesses that might hopefully steer you in directions you haven't looked in yet.
I presume you used triangle brackets (< >) to avoid having the Jive Forum think it was the "italics" tag?
Are you certain this: dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
expects a Vector as its second parameter? And returns a Vector?
I don't believe you've shown how you use the javabean, or its code? Perhaps it should be rewritten to accept an array of strings instead of a Vector? -
How to get parameter value from report in event of value-request?
Hi everyone,
The customer want to use particular F4 help on report, but some input value before press enter key are not used in event of "at selection-screen on value-request for xxx", How to get parameter value in this event?
many thanks!
JackYou probably want to look at function module DYNP_VALUES_READ to allow you to read the values of the other screen fields during the F4 event... below is a simple demo of this - when you press F4 the value from the p_field is read and returned in the p_desc field.
Jonathan
report zlocal_jc_sdn_f4_value_read.
parameters:
p_field(10) type c obligatory, "field with F4
p_desc(40) type c lower case.
at selection-screen output.
perform lock_p_desc_field.
at selection-screen on value-request for p_field.
perform f4_field.
*& Form f4_field
form f4_field.
*" Quick demo custom pick list...
data:
l_desc like p_desc,
l_dyname like d020s-prog,
l_dynumb like d020s-dnum,
ls_dynpfields like dynpread,
lt_dynpfields like dynpread occurs 10.
l_dynumb = sy-dynnr.
l_dyname = sy-repid.
*" Read screen value of P_FIELD
ls_dynpfields-fieldname = 'P_FIELD'.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_READ'
exporting
dyname = l_dyname
dynumb = l_dynumb
tables
dynpfields = lt_dynpfields
exceptions
others = 1.
check sy-subrc is initial.
*" See what user typed in P_FIELD:
read table lt_dynpfields into ls_dynpfields
with key fieldname = 'P_FIELD'.
*" normally you would then build your own search list
*" based on value of P_FIELD and call F4IF_INT_TABLE_VALUE_REQUEST
*" but this is just a demo of writing back to the screen...
*" so just put the value from p_field into P_DESC plus some text...
concatenate 'This is a description for' ls_dynpfields-fieldvalue
into l_desc separated by space.
*" Pop a variable value back into screen
clear: ls_dynpfields.
ls_dynpfields-fieldname = 'P_DESC'.
ls_dynpfields-fieldvalue = l_desc.
append ls_dynpfields to lt_dynpfields.
call function 'DYNP_VALUES_UPDATE'
exporting
dyname = l_dyname
dynumb = l_dynumb
tables
dynpfields = lt_dynpfields
exceptions
others = 0.
endform. "f4_field
*& Form lock_p_desc_field
form lock_p_desc_field.
*" Make P_DESC into a display field
loop at screen.
if screen-name = 'P_DESC'.
screen-input = '0'.
modify screen.
exit.
endif.
endloop.
endform. "lock_p_desc_field -
How can I get null values for the later weeks
Hi All,
When I execute this code I get the records till current week.
How can I display the output so that I get null values for the later weeks. (with the help of v_numOfWeeks variable in the code)
Thanks,
Vikram
DECLARE
v_query VARCHAR2(4000);
TYPE ref_cursor IS REF CURSOR;
v_refcur ref_cursor;
v_sum NUMBER;
v_id NUMBER;
v_name VARCHAR2(1000);
v_weeknum NUMBER;
v_pernum NUMBER;
v_numOfWeeks NUMBER := 5;
BEGIN
v_query := ' SELECT SUM(product_bkg), postn_id, postn_tbl.postn_name, b.week_num, b.period_num
FROM ops_cv_extract b, (SELECT row_id, desc_text postn_name
FROM s_postn) postn_tbl
WHERE lvl_6_id = 5767
AND fiscal_year = 2008
AND b.week_num < 4
AND b.period_num = 3
AND b.postn_id = TO_NUMBER(postn_tbl.row_id)
GROUP BY postn_id, postn_tbl.postn_name, b.week_num, b.period_num
ORDER BY postn_tbl.postn_name, b.week_num';
OPEN v_refcur FOR v_query;
LOOP
FETCH v_refcur INTO v_sum, v_id, v_name, v_weeknum, v_pernum;
EXIT WHEN v_refcur%notfound;
dbms_output.put_line('P'|| v_pernum||'W'|| v_weeknum||' '||v_name||' '||v_sum);
END LOOP;
END;
This is the output when I execute this code.
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W2 COMM CNTRL TAM 216 12561.4
P3W3 COMM CNTRL TAM 216 2027.1
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
This is the output I'd like to get
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W4 COMM CNTRL ISAM 213
P3W5 COMM CNTRL ISAM 213
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W4 COMM CNTRL ISAM 273
P3W5 COMM CNTRL ISAM 273
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W4 COMM CNTRL TAM 213
P3W5 COMM CNTRL TAM 213
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W4 COMM CNTRL TAM 273
P3W5 COMM CNTRL TAM 273
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
P3W4 Damon Walters
P3W5 Damon Walters Edited by: polasa on Oct 28, 2008 6:42 PMSure, in a Single SQL ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.01
satyaki>
satyaki>
satyaki>-- Start Of Test Data --
satyaki>with week_tab
2 as
3 (
4 select 1 period_num, 1 week_num, 10 bkg1 from dual
5 union all
6 select 1, 2, 40 from dual
7 union all
8 select 1, 3, 30 from dual
9 union all
10 select 1, 2, 20 from dual
11 union all
12 select 1, 1, 10 from dual
13 union all
14 select 1, 1, 20 from dual
15 union all
16 select 1, 3, 10 from dual
17 union all
18 select 2, 1, 15 from dual
19 union all
20 select 2, 2, 20 from dual
21 union all
22 select 2, 3, 10 from dual
23 union all
24 select 2, 1, 15 from dual
25 union all
26 select 2, 2, 30 from dual
27 union all
28 select 2, 3, 20 from dual
29 )
30 -- End Of Test Data --
31 select period_num,
32 week_num,
33 (
34 select sum(week_tab.bkg1)
35 from week_tab
36 where period_num = m.period_num
37 and week_num = m.week_num
38 group by week_num, period_num
39 ) sum_bkg1
40 from (
41 select dum.week_num,
42 wk.period_num
43 from (
44 select 1 week_num from dual
45 union all
46 select 2 from dual
47 union all
48 select 3 from dual
49 union all
50 select 4 from dual
51 union all
52 select 5 from dual
53 ) dum ,
54 (
55 select distinct period_num
56 from week_tab
57 ) wk
58 ) m;
PERIOD_NUM WEEK_NUM SUM_BKG1
1 1 40
1 2 60
1 3 40
1 4
1 5
2 1 30
2 2 50
2 3 30
2 4
2 5
10 rows selected.
Elapsed: 00:00:00.48
satyaki>Regards.
Satyaki De. -
//Initialize the Engine
EngineClass myEngine = new EngineClass();
myEngine.LoadTypePaletteFilesEx(TypeConflictHandlerTypes.ConflictHandler_Prompt, 0);
Step myStep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname,StepTypes.StepType_Action);
myStep.Name = "object";
DotNetModule dotnetmodule = myStep.Module as DotNetModule;
dotnetmodule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File,@"C:sequence.dll");
dotnetmodule.ClassName = "CN";
dotnetmodule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
dotnetmodule.MemberName = "ISI";
mySequence.Locals.NewSubProperty("object", PropertyValueTypes.PropValType_Reference, false, "", 0);
Sequence mySequence = myEngine.NewSequence();
mySequence.Locals.NewSubProperty(varName, PropertyValueTypes.PropValType_Reference, false, String.Empty, 0);
mySequence.InsertStep(myStep, 0, StepGroups.StepGroup_Main);
SequenceFile seqFile = myEngine.NewSequenceFile();
seqFile.InsertSequence(mySequence);
seqFile.Save("C:\\mySeq.seq");
I have done this,dynamically creating a sequence file in teststand programatically through c#.
Problem is
1.I created an action step and object Reference variable for the step, but i am not able to pass parameter values to the objectReference
2.I am not able to load the sequence in to the main Sequence of the sequence file in the teststand. How can I do these two things.Hi,
have you ever followed on my Links ?!?!?
If not please jump to this one
http://forums.ni.com/ni/board/message?board.id=330&thread.id=26880
and read the the answer from Mannoch
starting with this words:
Anthony -
Currently, functionality for retrieving the Metadata Token for a class constructor or member is not fully provided in the TestStand .NET Adapter API. The DotNetModule.GetConstructorMetadataToken() and DotNetModule.GetMetadataToken() methods only return the correct Metadata Token when the member/constructor prototypes have already been loaded. Thus, in the case of your code, when you call DotNetModule.GetMetadataToken(), the method is returning -1 because the member prototype for the Step you are referring to has not yet been loaded.
That means have to do a workaround for your stuff.
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e= -
Get a value from the method to class in workflow
Hi Expert,
I am doing a workflow and passing a value when submiting and i need to get the passing value in the Class for further info,
****Instantiate an empty event container
CALL METHOD cl_swf_evt_event=>get_event_container
EXPORTING
im_objcateg = cl_swf_evt_event=>mc_objcateg_cl
im_objtype = iv_objtype
im_event = iv_event
RECEIVING
re_reference = lr_event_parameters.
*****Set up the name/value pair to be added to the container
lv_param_name = 'LEVEL'.
lv_level = wd_this->adlvl.
****Add the name/value pair to the event conainer
TRY.
CALL METHOD lr_event_parameters->set
EXPORTING
name = lv_param_name
value = lv_level.
CALL METHOD cl_swf_evt_event=>raise
EXPORTING
im_objcateg = ls_sibflpord-catid
im_objtype = ls_sibflpord-typeid
im_event = iv_event
im_objkey = ls_sibflpord-instid
im_event_container = lr_event_parameters.
I Created a Customised Class zcl_asset and i need to get the iv_event or lv_level value which i passing in the above method to process further to determine the approver in my customised zcl_asset class.
Thanks,
Regards,
Deeesanth>I am doing a workflow and passing a value when submiting and i need to get the passing value in the Class for further info,
Look, this is not really possible. You cannot pass a value with your code to a class (whatever you mean by this?). With your method you are triggering an event with a parameter. It is possible to "catch" this event and its parameter from workflow. Then your parameter value will be in your workflow and you can use it later (with your class).
So for example, if you start a workflow with your code, you can create a container element into the workflow, and then with simple binding (in workflow editor) you can get your parameter value into the container element.
Regards,
Karri -
Parameter value for the Compensation Review CREVI is invalid
Dear Friends in a trying to access the Compensation Review application in MSS when i preview it applications shows the list of the employees. when i try to view the details of the comp review i am getting the error
"Parameter value for the Compensation Review CREVI is invalid"
What is this CREVI parameter? How do i get rid of this issue?Activated the HCM_ECM_CI_1 Business Function
Maybe you are looking for
-
XML Publisher 5.6.2 Document Processor Engine
Would I be correct in assuming that sending the xapi: tags through the regular concurrent request engine would be a fultile exercise in order to burst an invoice batch into multiple PDFs? Could somebody please confirm that I must use a JAVA concurren
-
I can't seem to download adobe bridge
adobe bridge won't download onto my mac
-
Performance Manager appears Error 2 in extracted graph - MDS9513
Hi Experts, I took a graph from ISL links and appears : Error when put mouse on top appears Error 2, the picture of graph in attached What kind of erros are these? Could you help me? Tks, Wellington
-
Can anyone tell me how from SAP MDM Console to restrict a particular user from viewing specific <u>Field(s)</u> in MDM Data Manager? Thanking you in advance. Hemal
-
N79 - change memory card from 4 to 8gb
my n79 came with a 4gb card with some Ngage demos already on it. I also installed Garmin on it.I want to change to a 8gb card so I backup everything from my 4gb card into my pc and restore it in the new 8gb card. Everything works but Ngage demos cann