Problem import to "New project" in 3.1.2?

After update to 3.1.2 import to "New Project" has started to show unexpected behaviour. Some pictures won't show in one project.
Ex import creates two new projects"apr 23, 2011" and "apr 24, 2011". apr 23 shows all photos as it should. arp 24 do not show any photos. If I hover the mouse over the apr 24 project it indicates that there are "2 Versions" there should be 7 Versions?
Both projects are in an Album structure "2011->April". When I select the whole album "April" I see the "missing" photos.
I can create a new project and move the photos to it. That works.
Anyone seen this in 3.1.2? It may be in older versions as well - but I just recently started noticing this.
/regards Roger

It could've been. I'm not very satisfied with how "Automatically split" correlates the date of the image with the date of the project. Oftentimes the last couple of pictures of the day (and not really late at that) gets assigned to the next day, and more often the first pictures of the next day gets sorted into the previous days project.
I'm using iPhone and a couple of Canons. And I have checked the time on all of them recently as we changed to "Daylight Savings Time" not long ago. But I would have thought that that only would affect pictures taken around midnight, give or take an hour. And even so I'm only off GMT by an hour or two. Not many of my photos gets taken between 2200 and 0200 :-)
But for the last incident I'm quite sure it has little to do with time as those photos that didn't show as expected were shot in the afternoon.
And further clarify - during import I saw the photos under the correct date/project, blue tickbox and all. ANd they got imported into Aperture. Only they fail to be visible when I select the project where they were supposed to go. On one occasion they re-appeared after re-start of the application. But on another (other photos/in another project) did not. And re-start Aperture after import just to continue to work is not a good workflow for me ...
/Roger

Similar Messages

  • I have problems with creating new projects in iMovie.

    I have problems with creating new projects. When i try, the mac says the following "Make sure there is enough disk space and that you have permission to write the projects to the drive." I have 8GB available, so its not that.

    thanks for your support
    lol

  • IMovie 11 gray clips - won't import to new project after crash

    Hi all,
    I was importing a load of video, recorded on a Zoom Q3HD (in .MOV format) to iMovie 11. At some point, iMovie crashed and forced me to restart the app. Since then, the clips I'm trying to import are showing up as gray in the clip window. Sometime, scanning over the clips will show thumbnails from a different clip however right now, it is showing me thumbnails of the movies I'm scanning over. I have trashed iMovie thumbnails and cache, done a permissions repair, restarted, checked for updates, even resaved the problem clips in QuickTime, thinking that the format of the clips could be an issue but it made no difference. Not sure what else I can do?? I am unable to drag these gray clips into a new project. Here is a screencast of my issue. Please let me know if you have any suggestions. Thx. Matthew
    http://www.youtube.com/watch?v=njlQMpas9aA

    What you are seeing may not be a symptom of the clips going bad but instead a symptom of something failing in the Project itself. Especially after a crash with iMovie open, everything is to be suspect. Be very paranoid about all the elements in that project, any one of them could be the source of the problem you are witnessing.
    Check out this Discussion Thread from September
    I movie quits unexpectedly during editing and publishing
    Click on the button near the top of the window where it says Project Library (it toggles between Library and edit Project).
    Click just once on the name of the project, so that it highlights in blue.
    Go to File Menu > Duplicate Project. There will now be a second project with the same name, but with a number added to the end of the name
    Open that duplicated project by double-clicking it
    from Jasonryan1. It relates to a corrupted item existing in his project. And in his attempt to troubleshoot it, he suspected it was a Title he placed in the Project itself. Once he deleted the corrupted Title he was able to successfully export it. As to which item is causing instability, that's a tricky process to narrow down. And I would agree it seems unlikely all your projects could have some corrupted element in them. But it might work to concentrate on the simplest project which is showing the symptoms you describe. Duplicate that project and start deleting pieces of it and trying to add a Title to it and see if iMovie crashes. And that's not to say it's a title, it could just as easily be a picture, a transtion or a music clip that's preventing that project from previewing and importing clips properly.
    Also consider the iMovie Preferences file.
    Delete the iMovie Preferences file:
    Go to the Desktop
    Click on Go Menu then Choose Library
    Go to Preferences > com.apple.iMovieApp.plist
    Drag that file to the trash, restart iMovie and see how it reacts

  • Problem importing adobe premiere project into After effects CS6

    I've been working in Adobe's premiere and after effects for quite a few years now and this problem is new to me.
    I'm working on a project in After Effects CS6 and want to import a premiere pro project into After Effects. I go -> File -> import -> adobe premiere project
    Select project
    Select sequence
    Now After Effects CS6 imports all files from the premiere pro project like before in CS5, but now also imports the videofiles as sequences at the root in my project panel and messes everything up. Before it usually imported nice and tidy with the same folder structure as the premiere pro project would have.
    But that isn't the main problem. When i open the sequence i wanted to import and work on, some clips have been shortened down to 1 FRAME LONG  at the end. These clips have a 500% speed  in premiere pro, but this has never been a problem before, after effects has always before been able to translate the speed variations in clips from premiere -> after effects.
    The adobe premiere project that was imported is a 60 sec promo with various clips in various formats (Gopro h264, dv pal quicktime etc). Footage not exceeding the fair amount that after effects should handle. 15-20 videfiles at 30 sec each.
    I've never had this problem before with premiere <-> after effects.
    Anyone?

    I just found the solution!
    In my adobe premiere project that i was trying to import, some of the clips were "right clicked" and applied "Scale to frame size"
    Every videoclip that had "scale to frame size" in my adobe premiere pro sequence would import as its own composition in After Effects rather than just a videofile, and some of the clips would be trimmed down to be invisible.
    So if you have any problem with a clip not importing correctly into a sequence in after effects, check to make sure "scale to frame size" is not applied to the clip in premiere pro.
    I removed the scale to frame size in the premiere project and now everything imports fine into after effects.
    Sorry for the post.

  • Problems creating a new project

    I just installed Creator 2.1 on a Fedora Core 4 workstation. It installed with no problems, but when I go to create a new project the wizard hangs after pressing finish. The only thing that is created is WebApplication1/nbproject/project.xml. The following is what was placed in the log.
    Log Session: Thursday, May 4, 2006 2:58:18 PM UTC
    System Info: Product Version = Java Studio Creator 2 Update 1 (Build 060417)
    Operating System = Linux version 2.6.16-1.2096_FC4 running on i386
    Java; VM; Vendor = 1.5.0_06; Java HotSpot(TM) Client VM 1.5.0_06-b05; Sun Microsystems Inc.
    Java Home = /opt/sun/Creator2_1/java/jre
    System Locale; Encod. = en_US (rave); UTF-8
    Home Dir; Current Dir = /home/raykl; /home/raykl
    IDE Install; User Dir = /opt/sun/Creator2_1/platform5; /home/raykl/.Creator/2_1
    CLASSPATH = /opt/sun/Creator2_1/platform5/lib/boot.jar:/opt/sun/Creator2_1/platform5/lib/locale/boot_es.jar:/opt/sun/Creator2_1/platform5/lib/locale/boot_fr.jar:/opt/sun/Creator2_1/platform5/lib/locale/boot_ja.jar:/opt/sun/Creator2_1/platform5/lib/locale/boot_ko.jar:/opt/sun/Creator2_1/platform5/lib/locale/boot_zh_CN.jar:/opt/sun/Creator2_1/java/lib/dt.jar:/opt/sun/Creator2_1/java/lib/tools.jar
    Boot & ext classpath = /opt/sun/Creator2_1/patches/6311051.jar:/opt/sun/Creator2_1/java/jre/lib/rt.jar:/opt/sun/Creator2_1/java/jre/lib/i18n.jar:/opt/sun/Creator2_1/java/jre/lib/sunrsasign.jar:/opt/sun/Creator2_1/java/jre/lib/jsse.jar:/opt/sun/Creator2_1/java/jre/lib/jce.jar:/opt/sun/Creator2_1/java/jre/lib/charsets.jar:/opt/sun/Creator2_1/java/jre/classes:/opt/sun/Creator2_1/java/jre/lib/ext/localedata.jar:/opt/sun/Creator2_1/java/jre/lib/ext/sunjce_provider.jar:/opt/sun/Creator2_1/java/jre/lib/ext/dnsns.jar:/opt/sun/Creator2_1/java/jre/lib/ext/sunpkcs11.jar
    Dynamic classpath = /opt/sun/Creator2_1/platform5/core/core.jar:/opt/sun/Creator2_1/platform5/core/openide.jar:/opt/sun/Creator2_1/platform5/core/org-netbeans-swing-plaf.jar:/opt/sun/Creator2_1/platform5/core/openide-loaders.jar:/opt/sun/Creator2_1/platform5/core/updater.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_rave.jar:/opt/sun/Creator2_1/platform5/core/locale/org-netbeans-swing-plaf_es.jar:/opt/sun/Creator2_1/platform5/core/locale/openide-loaders_es.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_zh_CN.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_es.jar:/opt/sun/Creator2_1/platform5/core/locale/core_fr.jar:/opt/sun/Creator2_1/platform5/core/locale/org-netbeans-swing-plaf_zh_CN.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_ko.jar:/opt/sun/Creator2_1/platform5/core/locale/openide_fr.jar:/opt/sun/Creator2_1/platform5/core/locale/org-netbeans-swing-plaf_ja.jar:/opt/sun/Creator2_1/platform5/core/locale/core_zh_CN.jar:/opt/sun/Creator2_1/platform5/core/locale/org-netbeans-swing-plaf_fr.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_rave_ko.jar:/opt/sun/Creator2_1/platform5/core/locale/core_es.jar:/opt/sun/Creator2_1/platform5/core/locale/openide_ja.jar:/opt/sun/Creator2_1/platform5/core/locale/openide_ko.jar:/opt/sun/Creator2_1/platform5/core/locale/openide-loaders_zh_CN.jar:/opt/sun/Creator2_1/platform5/core/locale/org-netbeans-swing-plaf_ko.jar:/opt/sun/Creator2_1/platform5/core/locale/openide-loaders_ja.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_rave_fr.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_rave_es.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_rave_ja.jar:/opt/sun/Creator2_1/platform5/core/locale/openide_es.jar:/opt/sun/Creator2_1/platform5/core/locale/openide_zh_CN.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_ja.jar:/opt/sun/Creator2_1/platform5/core/locale/core_ko.jar:/opt/sun/Creator2_1/platform5/core/locale/openide-loaders_fr.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_fr.jar:/opt/sun/Creator2_1/platform5/core/locale/openide-loaders_ko.jar:/opt/sun/Creator2_1/platform5/core/locale/core_ja.jar:/opt/sun/Creator2_1/platform5/core/locale/updater_rave_zh_CN.jar:/opt/sun/Creator2_1/rave2.0/core/smresource.jar:/opt/sun/Creator2_1/rave2.0/core/rowset.jar:/opt/sun/Creator2_1/rave2.0/core/smdb2.jar:/opt/sun/Creator2_1/rave2.0/core/derbyclient.jar:/opt/sun/Creator2_1/rave2.0/core/naming.jar:/opt/sun/Creator2_1/rave2.0/core/smoracle.jar:/opt/sun/Creator2_1/rave2.0/core/com-sun-rave-extension-ide-launcher-upgrade.jar:/opt/sun/Creator2_1/rave2.0/core/smspy.jar:/opt/sun/Creator2_1/rave2.0/core/sqlx.jar:/opt/sun/Creator2_1/rave2.0/core/jgraph.jar:/opt/sun/Creator2_1/rave2.0/core/sminformix.jar:/opt/sun/Creator2_1/rave2.0/core/smbase.jar:/opt/sun/Creator2_1/rave2.0/core/smsybase.jar:/opt/sun/Creator2_1/rave2.0/core/smsqlserver.jar:/opt/sun/Creator2_1/rave2.0/core/sql.jar:/opt/sun/Creator2_1/rave2.0/core/smutil.jar:/opt/sun/Creator2_1/rave2.0/core/locale/naming_zh_CN.jar:/opt/sun/Creator2_1/rave2.0/core/locale/naming_es.jar:/opt/sun/Creator2_1/rave2.0/core/locale/com-sun-rave-extension-ide-launcher-upgrade_fr.jar:/opt/sun/Creator2_1/rave2.0/core/locale/openide_rave_fr.jar:/opt/sun/Creator2_1/rave2.0/core/locale/core_rave_es.jar:/opt/sun/Creator2_1/rave2.0/core/locale/core_rave.jar:/opt/sun/Creator2_1/rave2.0/core/locale/openide_rave_es.jar:/opt/sun/Creator2_1/rave2.0/core/locale/sqlx_zh_CN.jar:/opt/sun/Creator2_1/rave2.0/core/locale/core_rave_zh_CN.jar:/opt/sun/Creator2_1/rave2.0/core/locale/openide_rave_zh_CN.jar:/opt/sun/Creator2_1/rave2.0/core/locale/com-sun-rave-extension-ide-launcher-upgrade_ja.jar:/opt/sun/Creator2_1/rave2.0/core/locale/sql_fr.jar:/opt/sun/Creator2_1/rave2.0/core/locale/naming_ja.jar:/opt/sun/Creator2_1/rave2.0/core/locale/sqlx_ja.jar:/opt/sun/Creator2_1/rave2.0/core/locale/sqlx_fr.jar:/opt/sun/Creator2_1/rave2.0/core/locale/core_rave_fr.jar:/opt/sun/Creator2_1/rave2.0/core/locale/openide_rave.jar:/opt/sun/Creator2_1/rave2.0/core/locale/sqlx_ko.jar:/opt/sun/Creator2_1/rave2.0/core/locale/openide_rave_ko.jar:/opt/sun/Creator2_1/rave2.0/core/locale/naming_ko.jar:/opt/sun/Creator2_1/rave2.0/core/locale/openide-loaders_rave.jar:/opt/sun/Creator2_1/rave2.0/core/locale/sqlx_es.jar:/opt/sun/Creator2_1/rave2.0/core/locale/openide_rave_ja.jar:/opt/sun/Creator2_1/rave2.0/core/locale/sql_ko.jar:/opt/sun/Creator2_1/rave2.0/core/locale/com-sun-rave-extension-ide-launcher-upgrade_ko.jar:/opt/sun/Creator2_1/rave2.0/core/locale/com-sun-rave-extension-ide-launcher-upgrade_zh_CN.jar:/opt/sun/Creator2_1/rave2.0/core/locale/naming_fr.jar:/opt/sun/Creator2_1/rave2.0/core/locale/core_rave_ja.jar:/opt/sun/Creator2_1/rave2.0/core/locale/sql_zh_CN.jar:/opt/sun/Creator2_1/rave2.0/core/locale/sql_es.jar:/opt/sun/Creator2_1/rave2.0/core/locale/com-sun-rave-extension-ide-launcher-upgrade_es.jar:/opt/sun/Creator2_1/rave2.0/core/locale/core_rave_ko.jar:/opt/sun/Creator2_1/rave2.0/core/locale/sql_ja.jar:/opt/sun/Creator2_1/nb4.1/core/org-netbeans-upgrader.jar:/opt/sun/Creator2_1/nb4.1/core/locale/org-netbeans-upgrader_ko.jar:/opt/sun/Creator2_1/nb4.1/core/locale/org-netbeans-upgrader_ja.jar:/opt/sun/Creator2_1/nb4.1/core/locale/org-netbeans-upgrader_es.jar:/opt/sun/Creator2_1/nb4.1/core/locale/org-netbeans-upgrader_zh_CN.jar:/opt/sun/Creator2_1/nb4.1/core/locale/org-netbeans-upgrader_fr.jar:/opt/sun/Creator2_1/ide5/core/org-netbeans-modules-utilities-cli.jar
    [org.netbeans.core.modules #4] Warning: module com.sun.rave.libs.jsf does not declare OpenIDE-Module-Public-Packages in its manifest, so all packages are considered public by default: http://www.netbeans.org/download/dev/javadoc/OpenAPIs/org/openide/doc-files/upgrade.html#3.4-public-packages
    Error getting db Port from file: /opt/sun/Creator2_1/rave2.0/config/com-sun-rave-install.properties (Permission denied)
    java.io.FileNotFoundException: /opt/sun/Creator2_1/rave2.0/config/com-sun-rave-install.properties (Permission denied)
    at java.io.FileInputStream.open(Native Method)
    at java.io.FileInputStream.<init>(FileInputStream.java:106)
    at com.sun.rave.dataconnectivity.utils.DbPortUtilities.getPropFromFile(DbPortUtilities.java:43)
    at com.sun.rave.dataconnectivity.DataconnectivityModuleInstaller.setBundledDBPort(DataconnectivityModuleInstaller.java:194)
    at com.sun.rave.dataconnectivity.DataconnectivityModuleInstaller.restored(DataconnectivityModuleInstaller.java:61)
    at org.netbeans.core.modules.NbInstaller.loadCode(NbInstaller.java:322)
    at org.netbeans.core.modules.NbInstaller.load(NbInstaller.java:240)
    at org.netbeans.core.modules.ModuleManager.enable(ModuleManager.java:869)
    at org.netbeans.core.modules.ModuleList.installNew(ModuleList.java:382)
    at org.netbeans.core.modules.ModuleList.trigger(ModuleList.java:316)
    at org.netbeans.core.modules.ModuleSystem.restore(ModuleSystem.java:253)
    at org.netbeans.core.NonGui.run(NonGui.java:355)
    at org.netbeans.core.Main.run(Main.java:185)
    at org.netbeans.core.NbTopManager.getNbTopManager(NbTopManager.java:241)
    at org.netbeans.core.NbTopManager.get(NbTopManager.java:190)
    at org.netbeans.core.Main.start(Main.java:311)
    at org.netbeans.core.TopThreadGroup.run(TopThreadGroup.java:90)
    at java.lang.Thread.run(Thread.java:595)
    You are trying to access file: jndi.properties from the default package.
    Please see http://www.netbeans.org/download/dev/javadoc/OpenAPIs/org/openide/doc-files/classpath.html#default_package
    Turning on modules:
    org.openide/1 [5.9.1.1 060417]
    org.netbeans.modules.queries/1 [1.4.1 060417]
    org.netbeans.modules.projectapi/1 [1.3.1 060417]
    org.openide.loaders [5.2.1.1 060417]
    org.netbeans.spi.viewmodel/2 [1.4.1 060417]
    org.netbeans.api.debugger/1 [1.3.1 060417]
    org.netbeans.api.debugger.jpda/1 [1.3.1 060417]
    org.netbeans.modules.j2eeapis/1 [1.3.1 060417]
    org.netbeans.bootstrap/1 [1.0.1 060417]
    org.netbeans.swing.plaf [1.2.1 060417]
    org.netbeans.core/1 [1.27.1 060417]
    org.netbeans.modules.settings/1 [1.7.1 060417]
    org.netbeans.api.xml/1 [1.8 3.999.4 060417]
    org.netbeans.modules.schema2beans/1 [1.11.1 060417]
    org.openide.io [1.6.1 060417]
    org.openide.execution [1.5.1 060417]
    org.netbeans.api.java/1 [1.7.1 060417]
    org.netbeans.modules.project.libraries/1 [1.10.1 060417]
    org.openide.src [1.5.1 060417]
    org.netbeans.libs.j2eeeditor/1 [1.4.1 060417]
    org.netbeans.modules.j2eeserver/3 [1.6.1 060417]
    org.netbeans.libs.xerces/1 [1.5.1 2.6.2]
    org.netbeans.modules.j2ee.dd/1 [1.3.1 1.0 060417]
    com.sun.rave.portlet.container/1 [1.0 1.0]
    com.sun.rave.portlet.container.pluto/1 [1.0 1.0]
    javax.jmi.reflect/1 [1.4.1 060417]
    org.netbeans.jmi.javamodel/1 [1.13.1 060417]
    javax.jmi.model/1 [1.4.1 060417]
    org.netbeans.api.mdr/1 [1.1.1 060417]
    org.netbeans.modules.jmiutils/1 [1.1.1 release41 060417]
    org.netbeans.modules.mdr/1 [1.1.1 release41 060417]
    org.netbeans.core.output2/1 [1.3.1 060417]
    org.netbeans.core.execution/1 [1.6.1 060417]
    org.apache.tools.ant.module/3 [3.17.1 060417]
    org.openidex.util/3 [3.6.1 060417]
    org.netbeans.modules.java.platform/1 [1.3.1 060417]
    org.netbeans.swing.tabcontrol [1.3.1 060417]
    org.netbeans.core.windows/2 [2.4.1 060417]
    org.netbeans.core.ui/1 [1.6.1 060417]
    org.netbeans.modules.xml.core/2 [1.7 3.999.4 060417]
    org.netbeans.modules.xml.catalog/2 [1.6 3.999.4 060417]
    org.netbeans.modules.masterfs/1 [1.4.1.1 060417]
    org.netbeans.modules.projectuiapi/1 [1.5.4.0.0 4.0.0 060417]
    org.netbeans.modules.projectui [1.3.4.0.0.1 060417]
    org.netbeans.modules.project.ant/1 [1.6.1 060417]
    org.netbeans.modules.classfile/1 [1.14.1 060417]
    org.netbeans.modules.javacore/1 [1.5.1 060417]
    org.netbeans.modules.java/1 [1.20.1.1 1.0.0 060417]
    org.netbeans.modules.java.project/1 [1.3.1 060417]
    org.netbeans.modules.javahelp/1 [2.5.1 060417]
    org.netbeans.modules.refactoring/1 [1.1.1 1.0 060417]
    org.netbeans.modules.servletapi24/1 [2.3.1 2.3.1 060417]
    org.netbeans.modules.autoupdate/1 [2.12.1.2 060417]
    com.sun.rave.extension.autoupdate/1 [1.2.1.1.0 060417]
    com.sun.rave.api.portlet.dd/1 [1.0 1.0]
    com.sun.rave.api.jsf.project/1 [1.2 060417]
    org.netbeans.libs.commons_logging/1 [1.0.1 1.0.4 060417]
    com.sun.rave.designer.markup/1 [1.0 060417]
    com.sun.rave.extension.openide/1 [1.0 060417]
    com.sun.rave.designtime/1 [1.0.0 060417]
    com.sun.rave.jsfsupport/1 [1.0.5 060417]
    org.netbeans.modules.editor.util/1 [1.4.1 060417]
    org.netbeans.modules.editor.fold/1 [1.2.1 060417]
    org.netbeans.modules.editor.lib/1 [1.3.1 0.1 060417]
    com.sun.rave.api.insync/1 [1.0 060417]
    org.netbeans.core.multiview/1 [1.5.1 060417]
    com.sun.rave.api.designer/1 [1.0 060417]
    org.apache.batik/1 [1.5 1.5]
    org.netbeans.modules.editor.plain.lib/1 [1.0.1 060417]
    org.netbeans.modules.editor/3 [1.19.1 060417]
    org.netbeans.modules.html.editor.lib/1 [1.0.1 060417]
    com.sun.rave.css/1 [1.0 060417]
    com.sun.rave.insync/1 [1.0.7 060417]
    com.sun.rave.dataprovider.runtime/1 [1.0 060417]
    com.sun.rave.jsfmetadata/1 [1.0.5 060417]
    com.sun.rave.toolbox/1 [1.0.5 060417]
    org.netbeans.modules.ant.freeform [1.5.1 060417]
    com.sun.rave.branding.projects.projectui/1 [1.0 060417]
    org.netbeans.tasklistapi/1 [1.16.6 6 060417]
    org.netbeans.modules.tasklist.core/2 [1.33.615 15 060417]
    org.netbeans.modules.suggestions_framework/2 [1.11.6158 8 060417]
    org.netbeans.modules.tasklist.docscan/2 [1.19.61584 4 060417]
    com.sun.rave.extension.tasklist.docscan/1 [1.0 060417]
    com.sun.rave.extension.ide.launcher.upgrade [4.1 060417]
    com.sun.rave.extension.core/1 [1.0 060417]
    com.sun.rave.corepackage/1 [1.1 060417]
    com.sun.rave.extension.java.platform/1 [1.0 060417]
    com.sun.rave.extension.core.javahelp/1 [1.0 060417]
    com.sun.rave.ravehelp/1 [1.0.3.1 060417]
    com.sun.rave.propertyeditors/1 [1.0.0 060417]
    org.netbeans.modules.ant.grammar/1 [1.10 060417]
    org.netbeans.spi.debugger.ui/1 [2.5.1 060417]
    com.sun.rave.extension.debuggercore/1 [1.0 060417]
    org.netbeans.modules.xml.text/2 [1.7 3.999.4 060417]
    org.netbeans.modules.javadoc/1 [1.14.1 060417]
    org.netbeans.modules.beans/1 [1.14.1 060417]
    com.sun.rave.branding.beans/1 [1.0 060417]
    org.netbeans.modules.image/1 [1.14.1.1 060417]
    org.netbeans.modules.utilities/1 [1.18.1 060417]
    com.sun.rave.branding.utilities/1 [1.0 060417]
    com.sun.rave.branding.openidex/1 [1.0 060417]
    org.netbeans.modules.vcscore/1 [1.14.1 promotionE 060417]
    org.netbeans.modules.vcscore.javacorebridge/1 [1.0.1 060417]
    org.netbeans.modules.properties/1 [1.14.1.1 060417]
    org.netbeans.modules.properties.syntax/1 [1.14.1 060417]
    org.netbeans.modules.debugger.jpda/2 [1.13.1.0.0.1 060417]
    org.netbeans.modules.debugger.jpda.ui/1 [1.2.1.0.0.1 060417]
    org.netbeans.modules.navigator/2 [4.1.1 promoe 060417]
    org.netbeans.core.ide/1 [1.6.1 060417]
    org.netbeans.modules.javanavigation/1 [4.1.1 060417]
    com.sun.rave.servernav/1 [1.1 060417]
    com.sun.rave.dataconnectivity/1 [1.0.4.1 060417]
    org.netbeans.modules.java.j2seplatform/1 [1.2.1 1.2.0 060417]
    org.netbeans.modules.servletapi/1 [1.6.1 060417]
    org.netbeans.modules.httpserver/2 [2.1.1 release41 060417]
    org.netbeans.upgrader [4.2.1 060417]
    org.netbeans.modules.java.freeform [1.0.1 060417]
    com.sun.rave.extension.java.freeform/1 [1.0 060417]
    org.netbeans.api.web.webmodule [1.2.1 060417]
    org.netbeans.modules.j2ee.api.ejbmodule [1.0.1 060417]
    org.netbeans.lib.cvsclient/1 [1.11.1 060417]
    com.sun.rave.branding.openide/1 [1.0 060417]
    org.netbeans.modules.clazz/1 [1.16.1 060417]
    com.sun.rave.extension.projects.projectui/1 [1.0 060417]
    org.netbeans.modules.web.jspparser/2 [2.2.1 060417]
    org.netbeans.modules.ant.browsetask [1.8.1 060417]
    org.netbeans.modules.j2ee.dd.webservice [1.0.1 060417]
    org.netbeans.modules.websvc.websvcapi [1.0.1 060417]
    org.netbeans.modules.junit/2 [2.14.1 060417]
    org.netbeans.modules.j2ee.common/1 [1.0.1 1.0.1 060417]
    org.netbeans.modules.servletapi23/1 [1.7.1 060417]
    org.netbeans.modules.xml.multiview/1 [1.0 1.0-release41 060417]
    org.netbeans.modules.editor.plain/1 [1.0.1 060417]
    org.netbeans.modules.html.editor/1 [1.0.1 060417]
    org.netbeans.modules.java.editor.lib/1 [1.0.1 060417]
    org.netbeans.modules.java.editor/1 [1.0.1 060417]
    org.netbeans.modules.html/1 [1.15.1 060417]
    org.netbeans.modules.web.core.syntax/1 [1.17.1.1 060417]
    org.netbeans.modules.web.core/1 [1.20.1 release41 060417]
    org.netbeans.modules.web.project [1.4.3 1.1.1.1 060417]
    org.netbeans.modules.web.jstl11/1 [2.3.1 2.3.1 060417]
    com.sun.rave.project.jsfportlet/1 [1.0 1.0]
    com.sun.rave.welcome/1 [1.0.1 060417]
    com.sun.rave.extension.web.project/1 [1.0 060417]
    org.netbeans.modules.web.freeform [1.0.2 060417]
    com.sun.rave.extension.core.execution/1 [1.0 060417]
    com.sun.rave.branding.core.windows/1 [1.0.1 060417]
    com.sun.rave.branding.xml.text/1 [1.0 060417]
    com.sun.rave.branding.autoupdate/1 [1.0 060417]
    com.sun.rave.extension.core.windows/1 [1.0 060417]
    com.sun.rave.branding.java/1 [1.0 060417]
    com.sun.rave.branding.vcscore/1 [1.0 060417]
    org.netbeans.modules.j2ee.sun.dd/1 [1.2 1.0]
    org.netbeans.modules.j2ee.sun.ide/1 [2.1.1.1 060417]
    org.netbeans.modules.debugger.jpda.ant [1.4.1 060417]
    org.netbeans.modules.java.j2seproject [1.2.2 1.2.0 060417]
    com.sun.rave.extension.vcscore/1 [1.0 060417]
    com.sun.rave.ejbsupport/1 [1.0 060417]
    com.sun.rave.jwsdpsupport/1 [1.1 060417]
    com.sun.rave.websvc/1 [1.0.6 060417]
    com.sun.rave.extension.core.output2/1 [1.0 060417]
    com.sun.rave.extension.web.freeform/1 [1.0 060417]
    org.netbeans.modules.web.monitor/1 [1.12.1 060417]
    org.netbeans.modules.diff/1 [1.10.1 promotionE 060417]
    org.netbeans.modules.vcs.advanced/1 [1.12.1 060417]
    com.sun.rave.extension.vcsgeneric/1 [1.0 060417]
    com.sun.rave.extension.objectbrowser.navigator/1 [1.0 060417]
    com.sun.rave.branding.core/1 [1.0.1 060417]
    com.sun.rave.branding.web.jspsyntax/1 [1.0 060417]
    com.sun.rave.extension.xml.catalog/1 [1.0 060417]
    com.sun.rave.extension.properties/1 [1.0 060417]
    com.sun.rave.extension.java.j2seproject/1 [1.0 060417]
    com.sun.rave.libs.jsf/1 [1.0.5 060417]
    com.sun.rave.extension.xml.core/1 [1.0 060417]
    com.sun.rave.project.migration/1 [1.0 1.0]
    com.sun.rave.navigation/1 [1.0.5 060417]
    com.sun.rave.project.navigationloader/1 [1.0 060417]
    org.netbeans.modules.vcs.profiles.cvsprofiles/1 [1.6.1 060417]
    com.sun.rave.ejb/1 [1.0.1 060417]
    org.netbeans.modules.vcs.profiles.vss/1 [1.6.1 060417]
    com.sun.rave.extension.editor/1 [1.0 060417]
    com.sun.rave.extension.core.ide/1 [1.0 060417]
    com.sun.rave.jsfcl/1 [1.1.1 060417]
    com.sun.rave.extension.core.multiview/1 [1.0 060417]
    com.sun.rave.extension.core.ui/1 [1.0 060417]
    com.sun.rave.modules.jsf.examples.postrelease/1 [1.0 060424]
    com.sun.rave.extension.debuggerjpda.ui/1 [1.0 060417]
    com.sun.rave.modules.jsf.examples.bundled/1 [1.0.1 060417]
    com.sun.rave.extension.javadoc/1 [1.0 060417]
    com.sun.rave.branding.web.project/1 [1.0 060417]
    com.sun.rave.extension.utilities/1 [1.0 060417]
    com.sun.rave.portlet.container.ant/1 [1.0 1.0]
    com.sun.rave.branding.tasklist.docscan/1 [1.0 060417]
    com.sun.rave.project.jsfloader/1 [1.1 060417]
    com.sun.rave.branding.image/1 [1.0 060417]
    com.sun.rave.extension.api.xml/1 [1.0 060417]
    com.sun.rave.branding.editor/1 [1.0 060417]
    com.sun.rave.extension.web.core/1 [1.0 060417]
    com.sun.rave.extension.xml.text/1 [1.0 060417]
    org.netbeans.modules.utilities.project/1 [1.2.1 060417]
    com.sun.rave.extension.utilities.project/1 [1.0 060417]
    com.sun.rave.extension.java/1 [1.0 060417]
    com.sun.rave.extension.java.editor/1 [1.0 060417]
    org.netbeans.modules.j2ee.ant [1.3.1 060417]
    org.netbeans.modules.j2ee.sun.ws61/1 [1.0 060417]
    com.sun.rave.extension.beans/1 [1.0 060417]
    com.sun.rave.designer/1 [1.0.6 060417]
    com.sun.rave.webui.samples.calendar/1 [0.1 060412_5]
    org.netbeans.modules.extbrowser/1 [1.6.1 060417]
    com.sun.rave.branding.extbrowser/1 [1.0 060417]
    com.sun.rave.branding.xml.core/1 [1.0 060417]
    com.sun.rave.webui.samples.ajax/1 [0.2 060410]
    com.sun.rave.branding.html/1 [1.0 060417]
    com.sun.rave.branding.xml.catalog/1 [1.0 060417]
    com.sun.rave.extension.html/1 [1.0 060417]
    com.sun.rave.extension.monitor/1 [1.0 060417]
    com.sun.rave.errorhandler.server/1 [0.2 060417]
    com.sun.rave.extension.refactoring/1 [1.0 060417]
    com.sun.rave.branding.openide.loaders/1 [1.0 060417]
    java.io.FileNotFoundException: /opt/sun/Creator2_1/rave2.0/config/com-sun-rave-install.properties (Permission denied)
    at java.io.FileInputStream.open(Native Method)
    at java.io.FileInputStream.<init>(FileInputStream.java:106)
    at com.sun.rave.errorhandler.DebugServerThread.run(DebugServerThread.java:55)
    java.io.FileNotFoundException: /opt/sun/Creator2_1/rave2.0/config/com-sun-rave-install.properties (Permission denied)
    at java.io.FileInputStream.open(Native Method)
    at java.io.FileInputStream.<init>(FileInputStream.java:106)
    at org.netbeans.modules.j2ee.sun.ide.j2ee.PluginProperties.getRaveInstallProperties(PluginProperties.java:736)
    at org.netbeans.modules.j2ee.sun.ide.j2ee.PluginProperties.getRaveInstallProperty(PluginProperties.java:720)
    at org.netbeans.modules.j2ee.sun.ide.j2ee.PluginProperties.getRaveRoot(PluginProperties.java:716)
    at org.netbeans.modules.j2ee.sun.ide.j2ee.PluginProperties.makeAbsolute(PluginProperties.java:674)
    at org.netbeans.modules.j2ee.sun.ide.j2ee.PluginProperties.loadPluginProperties(PluginProperties.java:174)
    at org.netbeans.modules.j2ee.sun.ide.j2ee.PluginProperties.<init>(PluginProperties.java:109)
    at org.netbeans.modules.j2ee.sun.ide.j2ee.PluginProperties.getDefault(PluginProperties.java:91)
    at org.netbeans.modules.j2ee.sun.ide.Installer.getPluginLoader81(Installer.java:525)
    at org.netbeans.modules.j2ee.sun.ide.Installer.initFacade(Installer.java:272)
    at org.netbeans.modules.j2ee.sun.ide.Installer.create(Installer.java:84)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.netbeans.core.projects.cache.BinaryFS$AttrImpl.methodValue(BinaryFS.java:484)
    at org.netbeans.core.projects.cache.BinaryFS$AttrImpl.getValue(BinaryFS.java:396)
    at org.netbeans.core.projects.cache.BinaryFS$BFSBase.getAttribute(BinaryFS.java:312)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:721)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:689)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:717)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:689)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:618)
    at org.openide.loaders.InstanceDataObject$Ser.instanceCreate(InstanceDataObject.java:1175)
    at org.openide.loaders.InstanceDataObject.instanceCreate(InstanceDataObject.java:692)
    at org.netbeans.modules.j2ee.deployment.impl.Server.<init>(Server.java:92)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.addPlugin(ServerRegistry.java:154)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.init(ServerRegistry.java:88)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.instancesMap(ServerRegistry.java:145)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.getServerInstances(ServerRegistry.java:279)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.getDefaultInstance(ServerRegistry.java:591)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.getDefaultInstance(ServerRegistry.java:573)
    at org.netbeans.modules.j2ee.deployment.impl.ui.RaveDefaultInstanceProvider.getDefaultInstanceNode(RaveDefaultInstanceProvider.java:20)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.netbeans.core.projects.cache.BinaryFS$AttrImpl.methodValue(BinaryFS.java:484)
    at org.netbeans.core.projects.cache.BinaryFS$AttrImpl.getValue(BinaryFS.java:396)
    at org.netbeans.core.projects.cache.BinaryFS$BFSBase.getAttribute(BinaryFS.java:312)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:721)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:689)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:717)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:689)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:618)
    at org.openide.loaders.InstanceDataObject$Ser.instanceCreate(InstanceDataObject.java:1175)
    at org.openide.loaders.InstanceDataObject.instanceCreate(InstanceDataObject.java:692)
    at org.openide.loaders.FolderInstance.instanceForCookie(FolderInstance.java:515)
    at org.openide.loaders.FolderInstance$HoldInstance.instanceCreate(FolderInstance.java:998)
    at com.sun.rave.servernav.ServerNavigator$ServerNavigatorFolder.createInstance(ServerNavigator.java:182)
    at org.openide.loaders.FolderInstance.defaultProcessObjects(FolderInstance.java:736)
    at org.openide.loaders.FolderInstance.access$000(FolderInstance.java:68)
    at org.openide.loaders.FolderInstance$2.run(FolderInstance.java:622)
    at org.openide.util.Task.run(Task.java:189)
    at org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:330)
    at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:721)
    [org.netbeans.modules.j2ee.sun] PluginProperties: See http://www.netbeans.org/issues/show_bug.cgi?id=55741 !
    Warning: use of system property netbeans.home in org.netbeans.modules.j2ee.sun.ide.j2ee.PluginProperties has been obsoleted in favor of InstalledFileLocator
    INFORMATIONAL *********** Exception occurred ************ at 2:58 PM on May 4, 2006
    javax.enterprise.deploy.spi.exceptions.DeploymentManagerCreationException: The Application Server installation directory is not correctly set up. (Use the properties sheet of the "Java System Application Server 8" node to enter a correct value.)
    at org.netbeans.modules.j2ee.sun.ide.Installer$FacadeDeploymentFactory.getDisconnectedDeploymentManager(Installer.java:233)
    [catch] at org.netbeans.modules.j2ee.deployment.impl.Server.getDeploymentManager(Server.java:135)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.addInstanceImpl(ServerRegistry.java:387)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.addInstance(ServerRegistry.java:416)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.init(ServerRegistry.java:135)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.instancesMap(ServerRegistry.java:145)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.getServerInstances(ServerRegistry.java:279)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.getDefaultInstance(ServerRegistry.java:591)
    at org.netbeans.modules.j2ee.deployment.impl.ServerRegistry.getDefaultInstance(ServerRegistry.java:573)
    at org.netbeans.modules.j2ee.deployment.impl.ui.RaveDefaultInstanceProvider.getDefaultInstanceNode(RaveDefaultInstanceProvider.java:20)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.netbeans.core.projects.cache.BinaryFS$AttrImpl.methodValue(BinaryFS.java:484)
    at org.netbeans.core.projects.cache.BinaryFS$AttrImpl.getValue(BinaryFS.java:396)
    at org.netbeans.core.projects.cache.BinaryFS$BFSBase.getAttribute(BinaryFS.java:312)
    at org.openide.filesystems.MultiFileObject.getAttribute(MultiFileObject.java:721)
    at org.openide.filesystems.MultiFileObjec

    OK, I have figured it out. When I initally installed Creator I did not pay attention to what the dialogs said. I just pushed the "Finish" button when it came up. After re-installing as root and my user I realized thet the last dialog said "Application Server could not be installed correctly. The following RPM packages need to be installed: compat-libstdc++, compat-libstdc++-devel"
    I had compat-libstdc++-33-3.2.3-47installed.
    I installed compat-libstdc++-296-2.96-132.
    Afterwards I installed Creator under "root" without an error, and I was able to create a new project.
    I hope this help some others. I saw several posts concerning Fedora.
    KLR

  • Problems Importing Premiere Pro Project into After Effects

    I've got my first Pemiere Pro CS6 project completed. Now i want to import it into After Effects CS6 to add titles.
    The PR file includes two segments, two still photos and two AE compositions. I am trying to import the PR project into AE two different ways: 
    1. File>Import> Adobe Dynamic Link>Adobe Premier Project. When I do this, the project looks great in the Footage tab of the RAM preview window on the right. But when I make a new sequence to get it on the Timeline so that I can begin to add titles, I get only  blackness in the Comp tab of the ram preview window whether I am playing a RAM preview or a spacebar preview.
    2. File>Import> Adobe Premier Project. When I do this, the two AE segments are missing.
    I am on an iMac with OSX.7.4.
    Can anyone give me some advice on the best way to do this?
    Thanks!
    --Carol Gunn 
    Gunn Graphics
    Austin, TX

    You will need to render out those two AE compositions to video before you can bring them back into AE through dynamic link.  If you are concerned with making changes, you can always replace footage in Premiere with a new render.
    Dynamic Link is just not designed with your workflow -- AE doesn't open multiple projects at one time, and your workflow ends up with AE trying to open 3.
    You can bring those two compositions into AE as imports.  They won't be linked together (so any changes in original project will not reflect in imported version) but you would have all 4 elements in one AE project.

  • Problem Importing Topics Between Projects

    This has fast become my new favorite place!
    Ok, here's the scoop:
    We had RoboHelp x5 and just moved to RoboHelp 8 a month or so ago. Shortly after the conversion, we copied all of our topics from our original project into a new project for a new product we're rolling out later this year.  The products are similar, but the names of screens and windows are different, so when a new topic is created, slightly different versions need to be created for each. I thought instead of manually changing each topic I could create the topic in one project, then open the other project, import it, and change the template to match the color scheme for the other product and be done with it.
    But somehow my doing this caused almost all of the nearly 3000 topics to become "not controlled" in RoboSource Control, affecting myself and 5 other developers. What about the import would cause this to happen and is there a way to prevent this?
    I was hoping that for each change we could just change one, import to the other and call it a day instead of having to manually do it twice. Is there a secret way of doing this that doesn't break the system and irritate my co-workers?
    Thanks,
    WD

    Hi Leon
    I know you have researched and you know and share what files should and should not be part of source control, that part is cool.
    What is curious to me though is that if the CPD were machine specific, why do things just work if you copy a project from one folder to another on a different PC. I would think if that were the case, the project would refuse to open an operate on the second PC or even in a different folder on the same PC.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Problem to make new project in visual studio 2012 Ultimate RTM This is often caused by registry permission problems

    hi
    i Install Visual studio Ultimate 2012 RTM and ..
    when i want to create a new project (windows application form C#) give me this error :"Visual Studio does not have permissions to read the template information from the system registry. This is often caused by registry permission problems"
    what can i do for this problem ?
    how can i solve this ?
    Visual studio Ultimate 2012 RTM

    This issue is quite wide-spread and it affected older Visual Studio versions. I am disapointed by the amount of junk advice and the lack of proper stance from Microsoft.
    The only correct solution I could find was provided by HallCrash on July 01, 2010 in this similar thread:
    social.msdn.microsoft.com/Forums/en-US/vbexpress2008prerelease/thread/c273b0e1-7f46-4065-afaf-4edf285d2531
    Ironically, that thread is locked and I was not able to give recognition to HallCrash there ...
    You'd have to scroll almost to the bottom to find HallCrash's solution. That solution is based on a Microsoft supported tool (SubInACL) which can be downloaded here: microsoft.com/en-us/download/details.aspx?id=23510. It limits the registry changes strictly
    to Visual Studio. Nevertheless, start by creating a System Restore Point.
    I do not trust and would not recommend using unknown software (such as the Softpedia suggestion) for this.
    Cheers

  • Solman_project - problem in creating new Project

    Hi everybody,
                   i want to create a new implementation project in SOlution manager to upload my Blue print in the system.so i am creatng new project using SOLMAN_PROJECT. in order to create Project IMG from solution managar, i selected the project name under System landscape-->img project, i was asked to "create a transport request for the IMG project immediately?". i gave yes but i get this meassage
                   "S:The ABAP/4 Open SQL:000 y insert results in duplicate database records. records in the data base"
    please help me in resolving the issue
    ergards,
    siva kumar

    check project name is uniqe or already used on setellite servers.
    Thanks
    Gyan

  • Bus problem on every new project.

    Everytime i open a new project in Logic Pro from PRODUCE-MULTITRACK STEREO PROD ,the new track has every channel completely full of 3 busses and a few effects .It doesn't happen when i open old tunes i've made.I've tried uninstalling Logic and tried Logic preferences -Initialize all .
    Any help much appreciated ,Paul.

    So it's time for you to setup your own template. You don't need to use the Logic Preset templates - just configure your own - use "save as template" and choose that as an Autoload Song when opening Logic or make an Alias of it and put that on your Desktop - so whenever you want to start a new project just open it from there.

  • Problem importing mp3s in projects

    I down loaded some mp3 backing tracks, created projects with them in GB on my MacBook, and imported them into my iPad with no problems. I have other backing tracks created either from midis I have down loaded or created with music notation programs. I tried converting them to mp3s so I could do the same thing. However, when I attempt to import them into GB on my iPad, I get and error message to the effect that the mp3 is damaged. I have made the conversion both with GB on the MacBook and with music notation programs, and everything works fine on the MacBook, I just can't get them into my iPad.

    You can't use mp3 format files in GarageBand for iOS projects...
    Adding audio sample to GarageBand
    Connect the device, select it in the left-hand column, open the Apps tab, scroll down to File Sharing, select GarageBand, add files with the button or drag and drop onto the file area. Files should be uncompressed audio in AIFF, WAV, CAF or Apple Loops format at 16bit, 44.1 kHz.
    Macloops is a potential source of new loops, no doubt there are others, and you can roll your own...
    Insert audio sample into song
    Open song in GarageBand for iOS, if needed switch to Tracks view or stop if playing, use the loops tool, audio files section, to insert your audio...
    tt2

  • Problem importing into new 10g db

    I am very new to Oracle - so you are warnned!
    I installed Oracle 10g and created a new database called alio. I set up a service and a listener.
    I now am trying to import a dump of another db. I ran a script before this to make sure alio is structured the same as the dump file, schemas, tablespaces, etc.
    I get to this point in the import and then it stops:
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    . importing ADM's objects into ADM
    No errors or anything, it just stops. Any ideas?

    Thank you so much for helping me. I found the alert.log file and copied the bottom of the file below:
    Thu Sep 27 11:56:32 2007
    Memory Notification: Library Cache Object loaded into SGA
    Heap size 2137K exceeds notification threshold (2048K)
    Details in trace file d:\orant\admin\alio\udump\alio_ora_2288.trc
    KGL object name :XDB.XDPhOB200OSSS++CkUwilGXQ==
    Thu Sep 27 15:24:09 2007
    Thread 1 advanced to log sequence 25
    Current log# 1 seq# 25 mem# 0: D:\ORANT\ORA10G\ORADATA\ALIO\REDO01.LOG
    Fri Sep 28 04:00:26 2007
    Thread 1 advanced to log sequence 26
    Current log# 2 seq# 26 mem# 0: D:\ORANT\ORA10G\ORADATA\ALIO\REDO02.LOG
    Fri Sep 28 06:00:00 2007
    Unable to restore resource manager plan to '':
    ORA-02097: parameter cannot be modified because specified value is invalid
    ORA-00439: feature not enabled: Database resource manager
    Fri Sep 28 22:00:11 2007
    Thread 1 advanced to log sequence 27
    Current log# 3 seq# 27 mem# 0: D:\ORANT\ORA10G\ORADATA\ALIO\REDO03.LOG
    Sat Sep 29 06:00:00 2007
    Unable to restore resource manager plan to '':
    ORA-02097: parameter cannot be modified because specified value is invalid
    ORA-00439: feature not enabled: Database resource manager
    Sat Sep 29 07:00:59 2007
    Thread 1 advanced to log sequence 28
    Current log# 1 seq# 28 mem# 0: D:\ORANT\ORA10G\ORADATA\ALIO\REDO01.LOG
    Sun Sep 30 00:52:51 2007
    Thread 1 advanced to log sequence 29
    Current log# 2 seq# 29 mem# 0: D:\ORANT\ORA10G\ORADATA\ALIO\REDO02.LOG
    Sun Sep 30 21:00:03 2007
    Thread 1 advanced to log sequence 30
    Current log# 3 seq# 30 mem# 0: D:\ORANT\ORA10G\ORADATA\ALIO\REDO03.LOG
    Mon Oct 01 00:00:00 2007
    Unable to restore resource manager plan to '':
    ORA-02097: parameter cannot be modified because specified value is invalid
    ORA-00439: feature not enabled: Database resource manager
    To do the import I am running a batch file that someone else wrote:
    @echo off
    REM Set working directory
    SET WORKING_DIR=%CD%
    REM drop and create user
    SET /P database=Enter database name:
    SET /P system_pass=Enter database system password:
    SET /P user_pass=Enter admin users password (ADM, BPS, etc.):
    echo.
    :retry
    echo Type 'single' if importing from a single dump file or
    echo type 'multiple' if importing from user dumps (i.e adm.dmp, fas.dmp, etc.)
    echo or type 'exit' to quit.
    echo.
    set choice='bogus'
    set /p choice=
    echo.
    if '%choice%'=='single' goto single
    if '%choice%'=='multiple' goto multiple
    if '%choice%'=='exit' goto exit
    cls
    echo.
    echo Not a valid entry
    echo.
    echo Please enter 'single', 'multiple', or 'exit' to continue
    goto retry
    :single
    echo Enter path to dump file including dump file name (i.e. q:\dmp\dump.dmp).
    set /p dmp_path=
    echo.
    echo ############################################
    echo %database% will now be updated with new data
    echo ############################################
    echo #
    echo Press CTRL-C if you do not wish to continue
    echo #
    pause
    sqlplus system/%system_pass%@%database% <"%WORKING_DIR%\dropcreat.txt"
    imp system/%system_pass%@%database% file=%dmp_path% full=n ignore=y buffer=40000000 fromuser=adm touser=adm statistics=none
    imp system/%system_pass%@%database% file=%dmp_path% full=n ignore=y buffer=40000000 fromuser=shr touser=shr statistics=none
    imp system/%system_pass%@%database% file=%dmp_path% full=n ignore=y buffer=40000000 fromuser=fas touser=fas statistics=none
    imp system/%system_pass%@%database% file=%dmp_path% full=n ignore=y buffer=40000000 fromuser=hrs touser=hrs statistics=none
    imp system/%system_pass%@%database% file=%dmp_path% full=n ignore=y buffer=40000000 fromuser=bps touser=bps statistics=none
    imp system/%system_pass%@%database% file=%dmp_path% full=n ignore=y buffer=40000000 fromuser=tea touser=tea statistics=none
    imp system/%system_pass%@%database% file=%dmp_path% full=n ignore=y buffer=40000000 fromuser=whs touser=whs statistics=none
    goto :exit
    :multiple
    echo Enter path to dump file (i.e. q:\dmp).
    set /p dmp_path=
    echo.
    echo ############################################
    echo %database% will now be updated with new data
    echo ############################################
    echo #
    echo Press CTRL-C if you do not wish to continue
    echo #
    pause
    sqlplus system/%system_pass%@%database% <"%WORKING_DIR%\dropcreat.txt"
    imp system/%system_pass%@%database% file=%dmp_path%\adm.dmp full=n ignore=y buffer=40000000 fromuser=adm touser=adm statistics=none
    imp system/%system_pass%@%database% file=%dmp_path%\shr.dmp full=n ignore=y buffer=40000000 fromuser=shr touser=shr statistics=none
    imp system/%system_pass%@%database% file=%dmp_path%\fas.dmp full=n ignore=y buffer=40000000 fromuser=fas touser=fas statistics=none
    imp system/%system_pass%@%database% file=%dmp_path%\hrs.dmp full=n ignore=y buffer=40000000 fromuser=hrs touser=hrs statistics=none
    imp system/%system_pass%@%database% file=%dmp_path%\bps.dmp full=n ignore=y buffer=40000000 fromuser=bps touser=bps statistics=none
    imp system/%system_pass%@%database% file=%dmp_path%\tea.dmp full=n ignore=y buffer=40000000 fromuser=tea touser=tea statistics=none
    imp system/%system_pass%@%database% file=%dmp_path%\whs.dmp full=n ignore=y buffer=40000000 fromuser=whs touser=whs statistics=none
    REM compile allsrc
    REM sqlplus system/manager@%database% <"%WORKING_DIR%\allsrc.txt"
    :exit

  • New Project From MS Powerpoint

    Hi,
    I've just installed and licensed Captivate 7.  I am having problems using the New Project from MSPowerpoint or the Insert / Powerpoint Slide option for a Blank Project.  I have tried this with both .ppt and .pptx files which I can open and save in Powerpoint 2007.
    When I try to create a New Project from MSPowerpoint Captivate tells me it is parsing the file, then it converts the slides (only 2 slides in the presentation), and then it freezes, and does nothing and I have to close the application down from Task Manager.  Creating a new project and then using the Insert / Powerpoint Slide option also freezes.  I have tried this with more than one Powerpoint presentation.  I have also tried this with 'Run the program as an Administrator' set.
    I have also installed the 7.01 update, and uninstalled and reinstalled Captivate to check my installation.
    Has anyone got any ideas as to how to get Captivate to import slides from Powerpoint?
    Thanks for your help.

    http://blogs.adobe.com/captivate/2013/11/announce-adobe-captivate-7-0-1-update-with-suppor t-for-os-x-mavericks-now-available.html
    Refreshing/deleting the Preferences folder is not mentioned, but that recommendation can be found in a lot of threads in this forum. Clearing cache regularly is another good practice, not with the files you are actively working on (they provide means to recover a file, besides backup that is by default not checked in Preferences).
    When importing PPT did you check High Fidelity option?
    Lilybiri

  • Newly downloaded images don't create a new project

    When I download images from my CF card, they don't show up anywhere in my projects, They only show up in the last download folder.
    My settings for import are Destination: New Project, Shore files: Aperture library, Rename files: none, No effect presets, no file types are checked, and no backup Location .
    How do I get my new images into a new project, and why aren't automatically creating a new project?
    I have an Imac running Mtn Lion, and the latest version of Aperture.

    Aperture will not import into new projects. When I click import, the dialog says importing to new project. A new project is not created. I have 9 projects which appear to have every image I've ever imported (over 8000). I have other projects, Every new image goes to Name 1.0 ,Name 1.0 1,Name 1.0 2, Name 1.0 3,Etc. Each of these files have all of my images on them, even ones that have prevously been successfully imported into their new projects.
    This is really weird. Either your current Aperture library needs fixing or you are having a problem with broken presets and preferences.
    Could you please make a test and see, if you are having the same result, when you are importing into a new test library? When in Aperture , go to the "File" menu and use the command "File > Switch to library > Other/New". Now try importing into your library. Do you see the same wrong project names?
    If it works well with a new Aperture Library, repair or rebuild your current library - see this manual page:  Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
    If it does not work well with a new Aperture library, delete your Aperture user preferences as described here: Aperture 3: Troubleshooting Basics
    Regards
    Léonie

  • Help creating a new project in JE8.1

    Hello,
    As I am very new to JAVA and the IDE I am having problems creating a new project using JE8.1.
    The problem that I am having is when I try to create a new project the only option under the "standard" folder is for me to create a project using an existing one. How in the world do I start from scratch?
    Could there be a problem with my install? I can open and edit existing files but for some reason when I try to create a project from scratch I do not have that option
    Thanks for pointing this newbie in the right direction
    Shawn

    Missing project entries are usually due to a corrupted userdir. Please try running the ide with a fresh user directory.
    http://blogs.sun.com/karthikr/entry/jse_directories
    http://wiki.netbeans.org/wiki/view/FaqMissingProjectCategories

Maybe you are looking for

  • Lack of apps on z10

    The lack of apps is what truly killing z10 most of my friends won't even look at the z10 because no Instagram. I tried my best to stick with BB but I'm going be selling my z10 back to the store and switching to IPhone 5. Sucks but true Subject Title

  • How to configure container trust relationships?

    The EJB 2.0 specification clearly states (paragraph 19.8.1.1) that '...EJB containers are required to provide deployers and administrators with the tools to configure trust relationships for interactions with intermediate web or EJB containers...'. H

  • What will be impacted if we change Acquisition value in closed year

    hello, I want to change the Net value of asset to zero for tax depreciation area for the closed year. I will change this by transaction type posting for acquisition value and ordinary depreciation. My question is: The year in which I need to post is

  • Solution Manager : TC SOLUTION_TRANSFER , Solution Import Error

    Hi All, I am trying to export a Solution from one Solution Manager to Another. I have exported the Solution from System A using TC: SOLUTION_TRANSFER , a solution.zip file was generated , now when I get to system B and was trying to import the soluti

  • Aperture & Iphoto Libraries Optimizing

    I'm new to Aperture and I think I might have rush thru the process of importing my images from IPhoto and now I don't know what mess I've created and would love if anybody could help me out arrange a little bit things over here. I have been using Iph