Problem in accessing BW Report

Hi All,
I need to show BW Reports in EP 7.0
I have created a system, it's alias and BW iviews and the reports are being shown properly. However, when I have created another user and given the role Reports to the user, then while accessing the reports i get the following exception
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'aliasbwreport_01'. Please check the system object and the alias..
See the details for the exception ID in the log file
Please let me know how should I fix this.
Points assured.
Regards
Nikhil Bansal

Hi Nikhil,
This could be a permission issue with your system that your second
user does not have. Assign proper permissiions to the system to the user,
remember to give end user permission.
Pls consider closing earlier threads if your problem has been solved.
Regards
Vineeth

Similar Messages

Portal Runtime Error while accessing BW reports through portal

Hi,
We are facing portal runtime error(An exception occurred while processing your request. Please send the exception id to your portal administrator) while accessing BI reports through portal frequently.
We are unable to trace the error in the 'default trace' log file and although refreshing the cache solves this issue, it is difficult to explain this to every user individually.
After many such errors, We found one log entry, which we are now not yet sure if it is relevant. The error states:
1.
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-ext-sid=<ID[url_ENCODE]>&Language=<Request.Language>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<Authentication>&<Report>&<BusinessParameters>'; the problem occured at position 230. Cannot process expression <LAF.AllVersions>
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:540)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:423)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Content pass of Application Integrator failed.
Component Name:       'com.sap.portal.appintegrator.sap.BWReport',
Context Name (iView): <iview name location>
Top Layer:            'BWReport/TopLayer',
Producer ID (FPN):    'null',
System Alias:         'Sap_bw',
2.
The cluster server element 111111 is not added in the EP cluster context,
   because prtbridge on 111111 is stopped or not yet started (maybe the server is starting or shuting down).
Please suggest us if the above logs are related to the issue or not
Kindly provide us any inputs or solutions.

Hi All,
We are also having similiar type of error in our portal.
com.sap.engine.services.prtbridge##com.sap.engine.services.prtbridge
#######SAPEngine_System_Thread[impl:5]_13##0#0#Error#1#/System/Server#Plain###
The cluster server element 125898350 is not added in the EP cluster context,
   because prtbridge on 125898350 is stopped or not yet started
(maybe the server is starting or shuting down).
We have implemented the FPN using RRA.
This error comes only for few users when they navigate in Portal. After clearing the cache, it works for all. Kindly help us to resolve this issue.
Regards,
Venkatesh

Problem in Loading a report

Hi there,
We have a problem on loading a report.
For some users, when they try to load the report the system prompts for username/ password.
This is a Web application system, where we use Windows authentication and impersonate=true.
I suppose that this problem might occur since users do not have access to C\Windows\Temp.
Thought for security reasons we do not want to give access to the users in this directory, and we do not want to change the temporary directory of windows ( from changing Temp Environment Variable)
We have also try thr bellow solution with no results:
"To change the CR temp folder, in registry, set the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Crystal Decisions
Report Application Server\InProcServer\TempDir "
Is tehre any way to change the default loading path for reports from C:\Windows\Temp to somthing else?
Thanks for your help.

Hello Maria,
the reg key you are describing is for inproc RAS. In my opinion this has only limited importance for your problem as you more likely have a user authentication issue.
Please try to narrow down the problem that 'some user can / others can't log in'.
What is the difference between these users ? Please check the database settings / possible roles for these accounts.
Please also see if these user can access the reports in the designer or if they get the same database issue. Is it just one report / a group of reports or all reports where you face that issue ?
Thanks a lot
Falk

Problem with the crystal reports XI

Portuguese
Boa Tarde, tenho um problema com o cristal reports XI.
ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
gostaria de saber como consertar isso
English
Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName = I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.

Fabiano, here is what I understand of the issue:
1) You are using CR XI (I am not sure if release 1 or release 2)
2) you are using .NET 2005
3) you are trying to change the server name, but the report keeps giving you data from the original server
Please answer the following:
1) Are you using CR XI release 1 or release 2?
2) Can you change to the new server, using the Crystal Reports Designer?
3) Can you duplicate the issue on your development computer?
4) What Crystal Reports service pack are you on?
5) Are you connecting to the database using OLE DB?
Ludek

Problem in Printing ABAP Report in EP using SAP Transaction IVIEW

Dear All,
A very gud evening,
I am using SAP Transaction Iview to show the ABAP Reports, But I have a Problem...
How to print this report???
Please solve this issue, I have measure requirement of it from client.
Thanks in Advance..

Thanks Haydn,
But my problem is that, there may be no of users will be accessing this report. user will not be having SAP GUI installed in his machine. He will be accessing Transaction IView after login in EP (from any where may be from cyber cafe) and He would like to take printout using any button on the screen.
So suppose any end user having only Internet Explorer installed in his machine, will he be able to take the print out. I think its very genuine requirement.
OR user can not take print out untill SAP GUI is installed in his machine???
Please suggest...
Thanks in advance...

Accessing ESSO Reporting Services Console

Hi to everyone,
I have just deployed the Oracle ESSO Reporting Services (version 11.1.1.5.0) with MS SQL Server 2008 R2 database to collect events about ESSO-LM. Both the Reporting Console and database are on the same server with Windows Server 2008 R2.
Events from one, test, client (there are no others at the moment) are being written to the database well, but I can not access the Reporting Console via web browser. As soon as I fill the user credentials, the login process starts but fails with the following errors (depending on the Silverlight):
==== with Silverlight 5.1.20913.00 ====
[Async_ExceptionOccurred]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.20913.00&File=System.dll&Key=Async_ExceptionOccurred
at System.ComponentModel.AsyncCompletedEventArgs.RaiseExceptionIfNecessary()
at Reporting.PLXReportService.LogonCompletedEventArgs.get_Result()
at Reporting.ReportService.logonCallback(Object sender, LogonCompletedEventArgs e)
at Reporting.PLXReportService.PLXReportServiceClient.OnLogonCompleted(Object state)
====
==== with Silverlight for Developers 3.0.50106.0 =====
An unknown error was encountered. Please contact your administrator for more information.
An exception occured during the operation, making the result invalid. Check InnerException for exception details.
at System.ComponentModel.AsyncCompletedEventArgs.RaiseExceptionIfNecessary()
at Reporting.PLXReportService.LogonCompletedEventArgs.get_Result()
at Reporting.ReportService.logonCallback(Object sender, LogonCompletedEventArgs e)
at Reporting.PLXReportService.PLXReportServiceClient.OnLogonCompleted(Object state)
====
I have also tried to install different version of Silverlight on the client site but that did not change the behaviour a bit.
The browser I use is default installation of Internet Explorer 8, which is the company standard, but the error occured also on Firefox 3.5.18. The error shows both when connecting to the Reporting Console via network from PC station as well as when launching the console localy on the server.
I have tried to rebuild the environment with no success.
What perplexes me is the fact, that I have been able to successfully implement the ESSO Reporting Services in our lab enviroment where I have not experienced this.
I have found a thread here dealing with this problem dating a few years back but with no solution. Have any of you happened to see this? If so, were you able to solve it? Could you please give me any hint which direction to go to solve this?
Thank you in advance,
Ondrej

The problem disappeared on its own over the weekend.

"Low-level" authorizations for accessing BW reports - add users to role

Using the advice in Topic "Low-level" authorizations for accessing BW reports, I have been able to publish a query to a role that has 3 test users and each user gets the same query but with different data, as determined in the tables.
Is there a way to look up the users and e-mail addresses from a table and associate them to the role? We have several hundred e-mail recipients that will not need BW access, but only need an e-mail with a static report that contains data on their own territories.

Hi!
i think programatically it might be complex. You got to maintain a seperate variant of report per user and use this variant to send mail. that means you need to maintain a variant and a Broadcast setting per user. once maintained you can use it any number of times the values will be recalculated everytime.
with regards
ashwin
<i>PS n: Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.</i>

I have problem with Access Connections on L412 after that utilyty upgrade

I have problem with Access Connections on L412 after that utilyty upgrade in early August. Windows 7 Ultimate/x64.
It stops connecting to WPA2 Enterprise (AES-CCMP), Microsoft PEAP, no server cert, with any credentials I try to use. The same account(s) works with native Intel manager on other notebooks and on mobile devices. I lost the wireless connectivity to enterprise WiFi network.
And, after deinstallation of Access Connections, the inability to connect keeped intact with native Win7 WiFi management.
I think, something was broken in Access Connections 5.83 Build 83C753WW and some registry settings/ dll modules were altered but not returned to normal after deinstall.

Access Connections is definitely broken for WPA encryption. Both versions 5.02 and 5.84 fail for me. If I use the Windows XP wireless configuration instead of Access Connections, everything works.
Does anyone know how to report this to Lenovo? I chased links around the web site but couldn't find a place.

Problem to access my count in adobe Digital Editions

Dear,
I`ve problem to access my count in Adobe Digital Edition, I bought an eBook in pdf format and when try read it, ask me to get in for my ID and password ind Adobe Digital Editions, report that there is another user use my licence.
Thus, I know that I`ve got 6 licence for Adobe Digital Editions.

Adobe ID, sign-in, and account help

No variable Screen when accessing web reports via "New analysis" button

Hello !
I need some help or explanation :
I'm on a web report (Java) and i want to access another report.
I click on the "new analysis" button on the top, then i open the "roles" folder and select a report.
The new report start but without the prompt screen with the variable selection.
I also saw that the URL shown on Internet explorer is the old one (not the new querie URL)
This is the same problem with all my queries when accessing them via the "new analysis" menu.
Why is this screen squeezed ?
I need to have these variable entries !
I've tried some modification on 0ANALYSIS_PATTERN .... (porperties / variable) = no effect
Thanks for your help.
Tech info :
Web template : 0ANALYSIS_PATTERN.
SAP NetWeaver BI 7.0 SP15
SAPGUI 710 Final Release SP7

Hello Karim,
I've exactly the same problem ! I've changed WT properties to ON for Variable Screen, Reset Variables etc... but it has no effect...
Did you find a solution ? If yes, can you share it.
Thanks a lot
AJ
Web template : 0ANALYSIS_PATTERN.
SAP NetWeaver BI 7.0 SP18

How to get Celan Access (NAC) reports about users stucked in Temporary role?

I am using Clean Access 4.7.2.
If a user does not mett a requirement and is unable to remediate, he is stucked in the Temporary role.
I checked the "Device Management > Clean Access y Reports" but this does not show any user with failed status with red flag.
The report shows successfull connection with green flag only.
How can I obtain report on the CAM about failed checks?
Thanks
Csaba

We had this problem and were told to press Cancel (and then confirm) in the top right corner of the Agent after failing posture assessment. When we did that, the complete report showed up in CAM within seconds and could then be used to manually remediate the machine.
Hope that helps!

How a J2EE web application access CR reports stored on the CR Server XI?

Hi,
I'll be working on some crystal report templates that will eventually be hosted/publish on the CR Server XI.
My questions are:
1. How my J2EE web application access those reports?
2. Do my web application uses some CR API for the connectivity and integration?
3. What will happen to the database connectivity of the report template? since the report are created locally.
4. Can the report template be edited/updated on the server?
5. How the CR XI login functionality be involve in the integration (web application ---> CR Server XI)?
6. Is the J2EE web application be deployed on similar web/application server where the CR Server XI resides?
7. What is the role of RAS, Universe, Business View Manager to this whole CR integration?
I hope you can provide some guidance on this journey to Crystal Report world
Regards,
Rulix Batistil
Genesis Networks Pte Ltd
www.gen-net.com.sg

1) Your application connects via the Java SDK using the appropriate JAR files.
2) It can. You can set the database information at runtime or use the already populated information from Enterprise.
3) Same as 2. Typically when you save the report to Enterprise you set up the database information there so that it runs against the database you want without prompting. You can change this via code to hit whatever equivalent database you want.
4) Yes. You would have to use RAS and the RCAPI to accomplish this via code. You can also make changes in the designer and overwrite the existing report template.
5) You will log in via code. The information on how to do so is in the SDK documentation, which I will link.
6) It can be deployed to the same machine as CR Server, though we recommend against that. Typically you will want to deploy it to a seperate web server and allow it to connect to the CR Server across the network.
7) RAS can be used to run reports, as well as the page server. The universe and business view manager are not directly used in code. If a report runs against a universe or business view then it will use them for data, but you wouldnt do anything with them directly.
[BOE Developer Library|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm]
You will find the Java SDK information under the BusinessObjects Enterprise SDK section.
Best Regards,
Jason

Discoverer Report Can i Access these report vie Internet

Dear Sir,
Can i access the report from cyber cafe(Web Enabled) that is generated with oracle 9i Discoverer. If YES then How ?
If NO then Why
OR
any other version from which we can access the report from cyber cafe that created with discoverer

Hi Felix,
of course. this works. In the customer exit you can read in step 2 the variables from the input screen.
function z_bw_e_zepcfiscyvvg.
*"*"Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(I_VNAM) TYPE RSZGLOBV-VNAM
*"     VALUE(I_VARTYP) TYPE RSZGLOBV-VARTYP
*"     VALUE(I_IOBJNM) TYPE RSZGLOBV-IOBJNM
*"     VALUE(I_S_COB_PRO) TYPE RSD_S_COB_PRO
*"     VALUE(I_S_RKB1D) TYPE RSR_S_RKB1D
*"     VALUE(I_PERIV) TYPE RRO01_S_RKB1F-PERIV
*"     VALUE(I_T_VAR_RANGE) TYPE RRS0_T_VAR_RANGE
*"     VALUE(I_STEP) TYPE I DEFAULT 0
*" EXPORTING
*"     VALUE(E_T_RANGE) TYPE RSR_T_RANGESID
*"     VALUE(E_MEEHT) TYPE RSZGLOBV-MEEHT
*"     VALUE(E_MEFAC) TYPE RSZGLOBV-MEFAC
*"     VALUE(E_WAERS) TYPE RSZGLOBV-WAERS
*"     VALUE(E_WHFAC) TYPE RSZGLOBV-WHFAC
*" CHANGING
*"     VALUE(C_S_CUSTOMER) TYPE RRO04_S_CUSTOMER OPTIONAL
data: wa_e_t_range     type line of rsr_t_rangesid,
        wa_i_t_var_range type rrrangeexit.
data: l_month(2) type n,
        l_year(4) type n.
case i_step.
    when '2'.
      read table i_t_var_range
           into wa_i_t_var_range
           with key vnam = 'M_SEV_01'.
      l_month = wa_i_t_var_range-low+4(2).
      l_year = wa_i_t_var_range-low+0(4).
      if l_month = '01' or l_month = '02'.
        l_year = l_year - 3.
      else.
        l_year = l_year - 2.
      endif.
      wa_e_t_range-low = l_year.
      wa_e_t_range-opt = 'EQ'.
      wa_e_t_range-sign = 'I'.
      append wa_e_t_range to e_t_range.
endcase.
endfunction.
Variable 'M_SEV_01' is a input variable for calmonth. From this variable the coding extract the fiscal year.
Sven

Problem with running bitmap report in Oracle 6i

Hello,
I am running a report from a form using run_product in client/server enviroment. And I use the same code in all forms that run reports. In test enviroment, everything works normally. But in customer enviroment there is weird behaviour. Some reports need a lot of time to be executed, and when they are finally finished, report previewer is not maximized as it is in test enviroment. And more important problem is that one report doesn't execute at all. Report background engine is started but report doesn't come out at all.
Here is code which I use to run reports:
declare
izvestaj      varchar2(15);
pListName varchar2(20) := 'parList';
dt      varchar2(6) := 'Screen';
pList      paramlist;
BEGIN
izvestaj := 'EBS12';
begin
pList := get_parameter_list(pListName);
if not id_null(pList) then
destroy_parameter_list(pList);
end if;
pList := create_parameter_list(pListName);
if (not id_null(pList)) then
add_parameter(pList, 'P_PREDUZECE', text_parameter, to_char(:kontrolni.preduzece_id));
add_parameter(pList, 'P_PRENOS', text_parameter, to_char(:prenos.id));
add_parameter(pList, 'P_RAD', text_parameter, :prenos.chk_radnik);
add_parameter(pList, 'P_LOK', text_parameter, :prenos.chk_lokacija);
add_parameter(pList, 'P_ZAR', text_parameter, :prenos.chk_isplata);
add_parameter(pList, 'P_RAS', text_parameter, :prenos.chk_raspored);
add_parameter(pList, 'P_NAL', text_parameter, :prenos.chk_nalet);
add_parameter(pList, 'P_BEZ_RAS', text_parameter, :prenos.bez_rasporeda);
add_parameter(pList, 'P_STATUS', text_parameter, to_char(:prenos.status));
add_parameter(pList, 'P_RAD_ID', text_parameter, to_char(:prenos.radnik_id));
add_parameter(pList, 'P_SORT', text_parameter, to_char(:prenos.redosled));
add_parameter(pList, 'PARAMFORM', text_parameter,'NO');
add_parameter(pList,'DESTYPE',text_parameter,dt);
run_product(reports, izvestaj, synchronous, runtime, filesystem, pList, null);
end if;
exception
when others then
set_alert_property('cfg_error',alert_message_text,'Poziv izveštaja nije uspeo! '||sqlerrm);
if (alert_button1=show_alert('cfg_error')) then null;
end if;
raise form_trigger_failure;
end;
END;
Is it maybe some enviroment settings problem and if yes, what should I pay attention on?
Tnx in advance,
Nati

Hello,
When you put a block on a "new stacked canvas" that canvas is generated as a popup canvas. If that popup overlaps with some other generated items (for instance: items in master block) Forms will not show it.
You can try showing that popup canvas programatically with Show_View('canvas_name') in When-New-Form-Instance and see what happens.
Dalibor
P.S. Why do you have to put detail block on a popup canvas? Why don't you simply put it on a "same content canvas"?

Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
     Dim r as New ReportDocument
     'v is the name of the Crystal ActiveX Report Viewer Control
     r.Load("C:\Report1.rtp")
     v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
Chi

VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ

Problem in accessing BW Report

Similar Messages

Maybe you are looking for