Problem in Calibration order
hi,
I have created calibration order (pm05) for test equipement and assigned tasklist with qm data ( inspection point 300) and maintained inspection char's in tasklist operation.
now i am releasing this order ..it is generating a inspection lot..
now i executed t.code qe17... entered test equipment.. and as soon as i click on button assign inspection point. it throwing an error that is " no inspection point is available for operation"
please suggest how to cop such problem...
Hi,
In the inspection plan for the equipment, assign the inspection point (For example - 300). First you have to activate the inspection point for the plant & task list assignment. Then assign the inspection point to the task list assigned to the inspection plan. Then only you will be able to complete the inspection.
Regards,
Prashant
Similar Messages
-
Problem while creating PO for Calibration order PR
Hi,
I am facing following problem while create PO for calibration order PR:
"Comparison of the field selection strings from the G/L account 8000010800 and the account assignment category F reveals that there is an incompatible combination of field selections for the field selection group 'Network'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K."
Can anybody help me urgently.
Regards,
MewHi,
Check the field selection for account assignment category & Field status group of G/L 8000010800.
Compare both & set the field selection equally in both.
Regards,
Piyush -
I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE. Having tried this, I was met with a recorded message, in Arabic, and no options to speak to anyone. I have found this process extremely frustrating and poor on your behalf. Not providing any options to speak to an Adobe representative is equally annoying. Please get back to me ASAP, as I need to use the product immediately.
CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O. -
How do i purchase license for lightroom 5? When i tried to process payment, it says There was a problem processing your order, please contact our Customer Service team on 800 448 1642 for assistance.
In this forum, we can't help with purchasing issues.
My suggestion is to call that phone number. -
I have a problem regarding sales order line item with confimed quanity
Hi Experts,
I have a problem regarding sales order line item with confimed quanity with '0' with delivery block but confirming the sales order quantity once the order is released from credit check.
The situation arises as per the below scenarios.
Scenario - 1 - When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx and the order is set with credit check. Once the order is relased from the credit check. The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
Scenario -2- Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
Maintain the stock for the line item 2 ( 5 Pcs).
Once the order is released from the credit check. Then for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
Can you please help me how to solve this issue.
Looking forward for your reply.
Thanks and Regards,Hi,
I agree with your point. In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check. Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5, But it should set to Zero quantity. Quatity should not be get confirmed it should be Zero Quantity.
Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok. But we dont want to remove the - Confirmation Block tick mark
Please any one can help me if you have any solution to solve this problem.
Thanks and Regards. -
Condition Period Problem in Sales order - Need help
Hi Gurus
I am testing Sales Order back dated
Condition period Problem in Sales order
example for you to understand
Sales Order where PO date is 17.12.2007
Del Date & Price date is 13.02.2008
Then it is not calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
But if i do it after 14 feb 2008 then it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
When I do it with current date it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621] say date is 9-5-2008
I am not able to trace out problem, kindly help me from where I do I check and why this is happening.
Rajesh ChalkeHi,
I am not sure if this solves your problem, but I am suspecting that this might be due to the 'valid on date' of the condition records created for the relevant duty condition types.
Since it was a recent regulation and VK11 usually defaults current date as the valid date, that condition record may have been valid only from the recent date on which it was created.
Check the date in VK12 (To find the exact selection parameters, check the pricing analysis in the sales order which will display the exact condition record which is being selected as of current date.) Check for the same parameters; change the date to relevant date in the past and recreate the sales order. Hopefully this should solve the issue.
Cheers,
KC -
BAPI - Problem in Sales order creation
Hi Friends,
I have problem in Sales order creation using BAPI ,I am getting a messsage - Error in creating document ,I have sent the code along with this mail ,can you help it out.
Code:
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
Regards,
Dineshwhat messages u are gettting in RETURN ? Please check the RETURN tables data.
[code]CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Regards
Prabhu -
Problem in Sales Order with specific condition type.
Hello Experts,
I'm facing a problem in sales order creation for a specific condition type.
the actual scenario is as below,
We have created a new condition type for special discount.This condtion type is applicable only for specific sales channels.Also the discount percentage has to fetched from a custom table.
To achieve this I've written a user exit "RV64A999"
In the FM, i've calculated the subtotal and fetched the discount percentage and calculated the discount amount. After implementing this, the SO were been created properly. for all the line items the discount amount was getting calculated properly.
But then I added a condition at the top of code in exit that the calculation for the new condition type should happen only for selected sales channels.
But after adding this condition in code, i'm facing problem. Now when I create/ change any SO, the discount amounts are getting calculated incorrectly. I'm getting discount amount even if the line item subtotal amount is zero (0).
Any help or pointers reagrding this issue will be very helpful and highly appreciated.Hi ..
Check your config. again or debug the routine code with your ABAPer and find the problem area.
-Maharshi -
Rounding off value problem in sales order
Hi All,
This is related to a rounding off value problem in sales order.
The problem is described by an example which is as follows -
Selling Price of Material A = Rs. 176.76
Excise charged = Rs. 21.80
Total Price = Rs.176.76 + Rs.21.80 = Rs. 198.56
On this total Trade Discount (ZDTD) having access sequence,is calculated at the rate of 4% = Rs. 7.94
But the condition base value after the discount is showing Rs.198.60 instead of Rs.198.56
I want the system to reflect the value as Rs.198.56 intact and it should not round up to the nearest value i.e. Rs. 198.60
Why is this happening? Is it possible to reflect the exact value? If yes what is needed to be done?
The commercial round off is activated for the DIFF Condition Type.
Looking forward to some valuable suggestions.
Thanks & Regards
Priyanka MitraHi Ramesh,
Thanks for your suggestion but the problem has been solved by me.
Regards
Priyanka Mitra -
Problem about sales order stock stock transfer and batch determination
Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
Can anybody help me? Is there anything else I need to do? Thanks very much.I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted from SAP.
-
Problem in process order creation.
Dear Sir/ Madam
i am facing a problem while process order creation.
the problem is:
Error when calculating cost for order ATFEDEC11 "see log Log is deleted when saving
Do you still want to save?"Hi,
The log for production order preliminiary costing is not saved. Therefore, once the order is saved, there is no log available anymore (this is by the way a question of PP; none of the logs is saved).
Hope that helps...
Regards,
Declan -
There was a problem with your order please call?
My wife ordered a 4S 32GB black model and was putting me on her plan of currently 2 phones. We ordered via the site about a week ago and got the message the phone would ship 11/30, added a data plan etc on a 3rd separate line. Received an order confirmation, but couldnt use the 6-7 digit order number to check on it kept saying no order. Today she checked and said she received soemthing from Verizon saying there was a problem with the order and to either call or email them. She's at work til 4p EST time but was curious if anyone else got this and what it could cause this message?
On a separate note I have my own plan with a iPhone 4 that I was going to cancel and move to her plan porting my number but the order wouldnt permit a port of a verizion number. I called and the rep swore there would be no cancellation fee (sounds fishy to me) but he had someone else look and they said there was no cancellation fee either. I dont know if the order flow recorded that and they are question it or something else is going on.
Any ideas on why Verizon would have a problem with the order would be great! Thanks!As far as the porting of your line to your wife's account...you might want to go in to a local store to handle that. I don't think it would be a port in the traditional sense...but a swap of responsibility...meaning your wife would take ownership of your line. I will have to do that soon for one of the lines under me so that the person using it can have it in their name. In that instance, there would not be any cancelation fees because the line isn't being canceled. The account ownership is just being taken over by someone else and they would take over the remainder of the contract.
As far as the issue with the order...if your wife makes you an authorized manager on the account you would be able to call in and discuss whatever is happening. The issue could be a number of things so it's hard to tell you what it could be. It's also possible that there isn't an issue at all and the problem is just that the system isn't recognizing the order number. -
There was a problem with your order.
I am trying to order CreativeCloud subscription (using upgrade option) but I keep getting an error "There was a problem with your order." after credit card is beeing processed. I tried it for several times but no success. My card details were entered correctly, card isnt expired and limit isnt exceeded.
Any ideas what could be wrong?
Thanks,
StanislavHi Svizual,
Are you still facing the issue?
-Dave -
Order Prints: A Problem With Your Order...
Does iPhoto store your order somewhere so you can order again?
After my wife spent hours cropping and ordering 290 pictures from the last year, we received an email saying we had A Problem With Your Order. We found a movie, AVI brand, that was included in the order and must have cause the problem.
It says to fix the problem, which we did, and resubmit. Does that mean we start the order process all over again?
ThanksIt says to fix the problem, which we did, and resubmit. Does that mean we start the order process all over again?
Yes - you can ask Apple for final verification - http://www.apple.com/support/photoservices/orderstatus/
LN -
Background Scheduling of Calibration Order
Dear Experts,
I want to scheule my calibration order in QM for calibration of Test Equipment in background.
I have created my maintenance order for calibration of Gauges / Instruments (which are defined as Equipments). The dates for the calibration have been calculated based on time. When I go to the transaction of scheduling the order & save, the inspection lot for calibration is generated & the equipment task list is assigned to the lot.
I want this to automatically happen in background. This is because I have thousands of equipments, for which I can not schedule the calibration manually.
Regards,
Prashanthi
you can use the IP30 deadline monioting for this purpose,ask your abaper to run the T code in frequent ( Weekly,Fortnight and etc)
regards
thyagarajan
Maybe you are looking for
-
Error while creating farm for Office web apps
Hello. I have error while creating office web apps fars. when I enter this code to powershell : New-OfficeWebAppsFarm -InternalURL "http://servername" -AllowHttp -EditingEnabled It says this: New-OfficeWebAppsFarm : The term 'New-OfficeWebAppsFarm' i
-
"no visible interface for uiapplication"
i am setting local noification in some viewController but this line code :"[[UIApplication sharedApplicaition] scheduledNotification:notification] " give me this error: "no visible interface for uiapplication declares the selector :scheduledNotificat
-
Why does safari quits during videos?
I'm having trouble watching clips on youtube or other links. During the video clips, Safari will unexpectedly quit. Also the clips will run about 4 seconds, then stop and load for 10 and then run for another 4. I have no idea why this is happening.
-
13MHz synchronous serial PXI-7831R FPGA
Hi, Have a requirement to emulate a slave synchronous serial interface (similar to SPI) at a rate of 13Mbps. Does this seem feasible using a RIO PXI-7831R?
-
HT3702 I'm being billed on my account when I haven't made any purchases
I've only bought free apps, but charges are showing up. What should I do?