Problem in comunnication channel

Hi.
I have a RFC that calls a destination, into my PI.... but when I call this RFC, the requisition generates an error in my communication channel...
This is the error:
2009-08-18 16:18:50 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found.
2009-08-18 16:18:50 Error Transmitting the message using connection http://hodb008yar:50900/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 404 : Not Found.
What can I do!?
I changed the parameters into exchange profile (com.sap.aii.connect.integrationserver.httpport = 8009), my integration engine, into sxmb_adm already linked to my sm59 connection, and using the correct port (8009)...
Any idea?
Thanks in advance.

Hi,
Try to access to http://hodb008yar:50900/sap/xi/engine?type=entry using a web browser and see what happend...
If you get the same error(404) the uri/server name/port is not the correct.
Regards
Ivan

Similar Messages

  • Problem in File Channel

    Hi,
    I have a scenario whice is split in two parts (to be precise two saperate scenarios execute).
    In the first one file is received from a SOAP channel as attachment, and through a receiver file channel it is sent to a local folder in XI.
    In the second Interface, a File channel picks that files and througha SOAP channel sends it to the third party.
    Now the issue is,
    In the first interface the size of the file received and size of the file sent to XI folder is same, means no truncation is there.
    But when the File is picked by the file channel in second interface, the file gets trucated and it only picks a part of the file.
    Other interfaces are dealing fine with any file size, but only this particular interface is truncating data.
    Any help on this will be appreciated,
    Thanks,
    Vikas

    Hi Vikas,
          I dont know why you designed interface like 2 flow,you can avoid one interface as per question
    SOAP---->SAP PI----->File
    File-->SAPPI---->Receiver.current flow,
    you can make it SAOP--->pi--->Receiver,but i dont know why you developed as two flows..coming to truncation problem i  dont think problem with communication channel,my advice to you check in Moni Outbound payload,if it is taking whole message then the problem with Maping,some where you done wrong.
    else
    first open the content of the file in wordpad and see,and check communication details.
    Regards,
    Raj

  • Problem in Communication channel monitoring..

    Dear friends,
    I am facing a problem in Communication channel monitoring.
    Problem:
    I have designed several communication channels in the Integration directory.
    To check the status of channel i will go to RWB->Component Monitoring->Adapter Engine->Communication channel monitoring, then we have a selection screen to filter out the channel, adapter,etc..
    Here i am NOT seen any channels to filter out. I.e. Channels in the Integration directory are not reflecting here.
    Can you please help out on this?

    HI,
    Do the CPACache refresh .
    ALso check this SAP Note- 937382
    Regards,
    Moorthy

  • Neo2 platinum Encountering Stability Problems /w dual channel memory

    Hello,
    Recently I built my first computer ever, see bottom.  After getting windows installed I then had problems with installing other programs and general stability issues.  I tried reinstalling windows and after the reinstall I got the same problems.
    Something to do with the instability is when I start it up, and go into BIOS, it states my Athlon 64 3500+ as running at 2211, a half percent overclock.  Also, even though I have the FSB set as 200mhz, when I go into CoreCenter on windows it states the FSB as being set 201mhz.  In the nVidia system utility, it states my memory as running at 402mhz, and I had to crank that down to 400mhz to get stability, it allowed my to install programs without error, but there were still stability problems like crashes(blue screen, the computer just plain restarting without notice).  I took out one of my memory cards, both of them work alone though, I've ran memory test utilities.  That had a good effect and the computer runs fairly stable, but I still have problems, and I want to be able to take advantage of dual channel.  I'm running my memory on auto and it's using the times of 2-3-3-6-2T.
    Another problem I'm experiencing is the AC97 audio not being detected and loaded by windows, it will say I have no audio device, and the speaker will not show up in the notification area in the bottom right-hand corner.  This happens inconsistantly.
                               -Thank You
    AMD Athlon 64 3500+
    MSI Neo2 Platinum(nForce3 939 socket)rev1.0 BIOS 1.4
    2x Mushkin DDR400 512mb CL2 Blue
    BFG GeForce6800GT OC
    80gb Hitachi Deskstar SATA

    hi bknoll,
    welcome to the forum.
    1) i wouldn't worry overmuch at the 201 issue.
    2) Quote
    I've ran memory test utilities. That had a good effect and the computer runs fairly stable, but I still have problems
    which test utilities did you use, Don't quiet understand  Quote
    had a good effect and the computer runs fairly stable
    3) It may be worth checking the Mushkin site or any documentation you have to verify that the auto settings agree with the quoted settings for the modules. It's not unkown for errors to occur when the memory controller on the CPU to misinterpret the SPD chip setting on your sticks - this is where the auto settings come from. Some memory like certain corsair modules need to run at different settings on AMD64, thus auto timings must be overidden,
    4) Have you installed the Realtek drivers from the CD, & enabled onboard sound in Bios. When these are done normally there's the MSI Sound Effect manager in control panel. you just need to set your speaker config in the Windows Sounds & Audio Devices.
    5) Usual question What power supply are you using as been underpowered on the 12v rail in particular can be the cause of crashes,

  • Problem with scanning channels

    We are trying to use BB 1.2 with a PCI-1200 card and the NI-DAQ that is included on the BB1.2 CD.
    The real problem comes when the program is opened and we've configured the channels to have more than one channel scanning and the others disconnected. (The following does not occur with only one connected channel.) The first sign of troubles comes after calibration when we try to change the vertical scale. The software gives the same number for max and min (usually 25 one channel and 0 on the other). When I attempt to change these, the computer gives two consecutive errors: the first saying that the max cannot be greater than 25 (for example) and the second saying that the min cannot be less than 25 (always the same number as the max).
    I've only gone as far as to try the scale for two channels.
    Accepting the unacceptable settings on the vertical scale, I press the go button. At this point, I get Error -10007 (my old LabVIEW nemisis). If I select only one channel on the scan list, this does not happen. I should note that I have had this problem with the PCI-1200 on two different computers. One brand new Dell and one that already has a PCI-6034E installed. I cannot cause the error with the 6034E, which tells
    me that it cannot be my computer settings. (If I acquire a few seconds of data with the 6034E, press stop, select the other card in the Channels window, and press GO, the same old problems arise.) When I use the test panels in MAX, the channels all work fine.
    Travis Bendele
    Manager of R&D
    Millar Instruments

    The patch mentioned above is attached to this comment.
    Wilbur Shen
    National Instruments
    Attachments:
    BioBench12P.exe ‏9058 KB

  • Problem with fibre channel card and raid system after upgrading to 10.4.7

    Hello, I have a problem with our Xserve G4 DP. After the installation of 10.4.7 everything works fine exept our fibre channel card. This card is connected to a Hitachi Raid System which worked fine over a year. But after the update the volume was no longer mounted. I even reinstalled the server to 10.4.4 and no sign of our raid volume. Using the apple fibre channel utiltiy 2.0, I see that there is a connection - but still the raid volume is not mounted. When I restart the server the lights on the back of the card are shortly flickering and sending some packets to the raid system but that´s all. Has anybody an idea?
    Greetings from Heidelberg
    Klaus
    Xserve G4 DP 1 GHz   Mac OS X (10.4.6)   Mac OSX Server 10.4.7

    You could re-update, by downloading the 10.4.7 Combination Updater from Apple.

  • Problems in creating channels (ni 6115)

    Hi all,
    I have used so far the Data acquisition toolbox in Matlab to operate with my NI 6115 card. Everything works fine. Now I would like to use
    NI-DAQmx functions to control the card. I'm pretty stuck with some basics and hopefully I can get some help. I cannot perform 'DAQmxCreateAIVoltageChan' without errors. My code starts as follows:
    %loading library
     if ~libisloaded('nicaiu')
        hfile = ['C:\Program Files\National Instruments\NI-DAQ\DAQmx ANSI C Dev\include\NIDAQmx.h'];
        funclist=loadlibrary('nicaiu.dll', hfile, 'mfilename', 'mxproto')
    end
    % Defining task
    DAQmx_Val_Volts= 10348; % measure volts
    % Creating task
    taskh1=uint32(1);
    [a,b,taskh1] = calllib('nicaiu','DAQmxCreateTask','master',taskh1)
    % Defining channel
    numofchans = 8;
    taskchans1=['Dev2/ai0:' num2str(numofchans-1)];
    [a,b,c,d] = calllib('nicaiu','DAQmxCreateAIVoltageChan',uint32(taskh1),taskchans1,'',-1,-10,10,DAQmx_Val_Volts,'')
    The task is appropriately created but once I define the channels I get
    >> a = -200088
    >> b = 1844396652
    >> c = Dev2/ai0:7
    >> d =    ''
    What could be the problem?
    Thank you! 
    Joonas 

    I have the same problem. I've tried a variety of pointers for the taskHandle, to no avail. I'm running R2009b 32-bit on Windows 7.
    DAQmx_Val_ChanPerLine = 0;
    taskhDO0 = [0];
    [err,b,taskhDO0] = calllib('nidaqmx','DAQmxCreateTask','DO2',uint32(taskhDO0))  % err = 0
    [err,b,c,d] = calllib('nidaqmx','DAQmxCreateDOChan',uint32(taskhDO0),'Dev1/port0/line0','',DAQmx_Val_ChanPerLine)   % err = -200088
        % setup MUX scanning task
    charBuffer = '111111111111111111111111111111111111111111111111111111111111111111111';
    muxHandle = libpointer('voidPtr',[0]);
    muxHandle = uint32(1);
    [result, ~, muxHandle] = calllib('nidaqmx','DAQmxCreateTask','aas2',muxHandle);
    decodeDAQError(result); % result = 0
    [result, ~, ~] = calllib('nidaqmx','DAQmxGetTaskName',uint32(muxHandle),charBuffer,length(charBuffer));
    decodeDAQError(result); % result = -200088
    [result,~,~,~] = calllib('nidaqmx','DAQmxCreateDOChan',uint32(muxHandle),'/Moo/port0/line0:3','MUXlines',0);
    decodeDAQError(result); % result = -200088

  • Problem with  communication channel on receiver side with file adapter

    Hi all,
    I m doing a scenario of collection of multiple idocs into a file.When i m testing this scenario,i m getting a flag successfully executed in SXMB_MONI.But,my file isn't created in my directory.When i monitor the communication channel in Runtime workbench,it's showing error :<b>Channel has not been correctly initialized and cannot process messages</b> for my receiver file adapter?I am not able to figure out the error.Anybody having idea about this problem.
    Regards,
    Anoop

    Hi Anoop
    Check it - File adapter is active ? try to Re-activate the same.
    Also do CPACache Refresh.
    Still problem, tyr out by restarting the Adapter Engine
    Cheers..
    Vasu
    <i>
    Reward Points if found useful **</i>

  • Problem with spot channels when importing PSD into AI CS3

    tried the Windows forum, and adobe tech support in The Netherlands. Hopefully someone here can help.
    b Problem description:
    I make spot colour separations of full colour artwork by using the index separation method in Photoshop. This creates several spot color channels in my PSD file.
    Normally I just place this PSD file in Illustrator CS2, and when I embed the file Illustrator makes objects of the spot channels. I can change the colors of these objects and delete them etc.
    Now with Illustrator CS3 when I import and embed a PSD file it just creates one object called "Spot Color Image". I can no longer adjust or delete separate spot channels.
    Maybe there is another way to achieving this but I cannot find it myself. Without this method Illustrator CS3 has become useless for me.

    Hi again, I did the same, and I see what you mean. The original image is an image, the channels are separate objects for me, but the original image isn't different channels.
    I found this in the Help file:
    Spot colors (up to 31 spot channels per file) import as a single N‑Channel raster image, which is placed over the process color image. The spot colors are added to the swatches panel as custom colors with the same name as in Photoshop. Imported spot colors separate correctly.
    Will think some more. Not sure what to suggest. Someone must have an answer to help you.

  • Noise problem on analog channels

    I have 18 analog channels connected in differential mode to a 6225 DAQmx card. I am trying to measure 14 pressures and 4 temperatures. I have connected the transducers directly to the AI connectors on my SCB68:s. I have also connected the shields from all transducers to the shields crew on the SCB68 to aviod noise.
    My problem is that I still get noise on my analog channels. I have configured the channels using MAX in differential mode. I have read the post "Field wiring an dnoise considerations for analog signals" for a better understanding of analog data aquistion using NI-DAQmx, still I am stuck with my noise.
    Can anyone help me? I have ran out of ideas.
    I get the best result using an capacitor between the positive and negative terminals on the daq board.
    PLEASE HELP!
    /Anders

    Hi Anders,
    Quite unlikely that card is inducing some internal noise.
    By selecting the range btw 0 to 1 V, you are only changing the ADC gain settings.
    What i suggest is that, you give a standard input of fixed voltage ,say like a dry cell or a function generator to the Analog input and check if you are still getting the kind of noise you are getting with your sensor attatched.
    Check this for both the ranges you talk about with suitable inputs.
    Now, if you do not get noise, then connect sensor in a suitable single ended mode and see if this gives you a better reading.
    If you are still getting noise, then i would suspect for improper chassis grounding
    do tell if this solves your problem
    Regards
    Dev

  • Question: Quick Look in Finder; problems with alpha channels

    Hi
    "Quick look" in Finder is great for quick presentations of a folders selected contents but it only works with images that contains no alpha channels or masks. Is there any way to work around this to display say PhotoShop documents with alpha channels? Or any plug-ins/applications that can help?
    thanks.

    This has been broken forever in OS X, and I don't know why, because it used to work just fine. I suspect the engineers did something to QuickTime that causes this problem, but it has been borked for so long I don't remember when the ability to correctly display files went wrong. I just remember that once upon a time all sorts of things from Apple worked correctly in displaying such files, but pretty much nothing does now. This includes the Finder, Preview, QuickLook, and various third-party image browsers that use Apple's own system level image handling abilities, such as VitaminSee or CocoaViewX. When I need to actually see what's there, I browse with Adobe's Bridge.
    Francine
    Francine
    Schwieder

  • Texture problem with alpha channel

    [code]
    on createMySphere
    sr= p3d.newModelResource("mySphere01", #sphere)
    s = p3d.newModel("s", sr)
    s.transform.position = vector (0,0,0)
    s.shader = p3d.newShader("sShdr2", #standard)
    txS= p3d.newTexture("txS", #fromcastmember, member("image"))
    s.shader.textureList[1] = txS
    sr.radius = 100
    sr.resolution =60
    end
    [code]
    im using png image format for textures, because i want to
    make user to its alpha channel. The problem comes when the image
    has the alpha, The sphere disappears no matter how the alpha is
    painted.
    how do i make use of the alpha channel, it doesn't even have
    to be in the same image.

    thanks i used #both on my sphere it shows up but i dont see
    the image only black the other side.
    i used it on my plane and the texture is gone.
    on createPlane
    planeR = p3d.newModelResource("plane01", #plane)
    planeO = p3d.newModel("planeO", planeR)
    planeO.transform.position = vector (0,0,0)
    p3d.model("planeO").visibility = #both
    planeO.shader = p3d.newShader("pShdr", #standard)
    txPlaneO = p3d.newTexture("txPlaneO", #fromcastmember,
    member("Asphalt10"))
    planeO.shader.textureList[1] = txPlaneO
    planeR.width = 5000.0
    planeR.length = 5000.0
    planeO.rotate (90, 90, 0)
    end createPlane

  • Problems with premium channels added

    I've been having nothing but problems trying to add channels to my package.  I went online yesterday & saw they were doing the 50% off for 12 months promo for their different movie packages and I went ahead and added the Showtime/Starz for $8.50/month.  It never came on last night.  I called and was told that my local center is probably closed & that it would work in the morning.  This morning it still didn't work so I called the # given to me last night (1-888-978-2176) which got me nowhere.  I was told my acct# is invalid and that I'm not even eligible for Fios in my area (which I've had for a year & a half.) After getting my address wrong several times, I was told I'd need to be called back (which I still haven't been.)
    I then called 1-800-VERIZON and was told he didn't see anything about me adding these channels.  I asked if he could go ahead and add them for me then and he said he could but it would be $9.99.  I stated how it was $8.50 online and he said maybe it was an online promo and that he couldn't give it to me.  I was then told that I could have Showtime OR Starz but not both.  I told him that when you go to upgrade online Showtime/Starz for $8.49/month was clearly an option to which he really didn't seem to care and said that's not available in my area and I'd pretty much have to get each one seperately.
    Sorry, part of this is to vent due to my frustration but another part is to see if this sounds right since I feel like I get a different story/response everytime I call customer service.  I really wanted Showtime/Starz but I told him if this was the case to just sign me up for Showtime.  Also if this is actually the case, that package should be removed from the options on the website.  I also should've been notified that my online order had been cancelled.

    I have the opposite problem - premium channels keep getting added without my permission or intention.  I have a 4-yr-old son and I think he is playing with the remote while I'm at work.  Apparently the FIOS STB will let you subscribe to any premium channels just by clicking a few buttons.  So far I have had HBO and the Playboy channel and some Chinese channel (nobody speaks Chinese here) and something else.
    I switched over from Comcast to Verizon's double-play last month, and now I'm really starting to regret it.  It has been nothing but a headache, from adapters that don't work to this. 

  • Picture problem on some channels

    Hi I am new to Youview got my box yesterday not sure if this is normal but sometimes when I go to a channel I get a black screen with just audio. If I go up or down a channel then back to the channel I was on it ok. This only seems to happen on freeview channels so am wondering could this be a signal problem.
    Thank you in advance

    This started happeing really from a first time install. I then decided to restore box. I was just flipping through the channels channel 035 QVC beauty and 042 Travel channel. Again the audio is there but the screen is black. It appears to always happen on these 2 channels and the one on BBC was just a one off.
    It just appears to happen to the same bunch of channels. At the moment BBC channels appear ok.

  • Problem activating wsrm channel

    Dear all,
    In PI 7.1 we have configured a WSRM sender channel that we are trying to activate. Unfortunately the channel is giving an error in the cache update. The error message is:
    Problem while updating a sender agreement with object ID 26EDA51402CE3246A5205DCF1B85AF37. :ICF: Error when creating service node. [rc:user_password_error] Password error
    The message is relatively clear, there is an error with the password. But which user is being used for creating the ICF service and where is this maintained?
    Your help is very much appreciated.
    Regards,
    Rudy

    Hi,
    WE too are facing the same problem.
    Could you please let us know, how did you manage to solve this problem?
    Or, what is the root cause of this kind of issue?
    BR,
    Uday

Maybe you are looking for

  • How do I add multiple JPanels to a JFrame?

    I've been trying to do my own little side project to just make something for me and my friends. However, I can't get multiple JPanels to display in one JFrame. If I add more than one JPanel, nothing shows up in the frame. I've tried with SpringLayout

  • Using RFC in VC model

    Hi Experts, I am doing a VC application. In this I am using Combo box in input form. I am populating this combo box with one RFC from R/3 system. I am able to see data on Development system. I have transported my VC Model and RFC to quality system bu

  • Track Deleted BOM item in Process Order

    Hi Guys, I am facing one issue which is described as below. when user is converting the Planned order into Process order at that time he has deleted 1 BOM item. Now i he is saying that i have not deleted that item and after that he released and done

  • What application can you use to open a file with the .acc extension?

    What application can you use to open a file with the .acc extension?

  • Cant download music to my Z10

    Purchased and downloaded music from BB World to my Z10..but when I click the music app on my device it reads "No Music" and a prompt to down load Blackberry Link.  Actually trying to reload music that got wiped during device switch from my old Z10 to