Problem in creation of ARD using B1DE 1.5

Hi Experts
I have develop an AddOn using B1DE 1.5. It is working properly. Now I want to create ARD file of addon . I use 'SAP B1 AddOnInstaller.Net wizard to create ARD file. I follow all the setps of wizard. It finish without any error. But it does not create ARD file in Bin folder. What can be problem ? Please suggest me.
Thanks
Regards
Jitender

Jitender,
You could manually create the ARD file by using the AddOnRegDataGen.exe. If you search the SDK Help file for "Create a Registration Data File", you will find the documentation that tells you how to do this.
With respect to B1DE ... if you actually go to the folder where you save your projects and open the installer project you created, as an example ...\Documents\Visual Studio 2008\Projects\B1AddOnInstallerNET1\B1AddOnInstallerNET1\B1AddOnInstallerNET1\
... in the ...\AddOnRegDataGenFile there should be an AddOnRegDataGen.bat file. You can try to also manually execute this to see if the .ARD file gets created. If it still does not it could be due to a pathing issue .bat file. You may want to check that the paths are correct.
Again ... worst case you can manually create the .ARD file as stated above.
Eddy

Similar Messages

Problem in creation of .ard file

Hi Experts
I am developing .ard file for a add-on using B1DE1.5 in SAP 2007B PL08 . Visual Studio is 2008. I have created a add-on . It was running successfully. Then I select File->Add-> New Project. Here I select SAP B1 Add-OnInstaller .Net Wizard
This wizard Ask for file .exe, UI DLL, DI DLL and Wizard DLL. I add all these files. It finished successfully. I Rebuild this project . then I search the .ard file in BIN folder but could not find anywhere. Can anyone suggest me for this problem.
Regards
Gorge

Hi Gorge,
In the same folder as bin folder, you should find a AddOnRegDataGenFile folder. In this, you'll find a .bat file which you need to run in order to generate the .ard file.
Regards,
Vítor Vieira

Problems in creation of workbook using Change query local view.

Hi Experts,
I have created a Multiprovider by using union of two infocubes and created a Query based on Multiprovider. I want to restrict one infocube in Change Query local view for creating new workbooks. In Query global view we drag and drop the Infocube under Filters, but in the Query local view Filter panel is in disable mode. (My requirement is to create the workbooks using change query local view only)
How can I restrict the one Infocube values in the workbooks by using Change query local view?
Thanks in advance.
Venkat.

Hi Venkat Prasad
As you told that the query is on multi provider and the view is not allowing to declare/define filter value
Just drag the infoprovider info object avilable under packet dimension to rows and right click on it restrict by selecting the name of the info provider when u right click it will show you the option of restrict once u click on it,it will takes to u a pop up where you can able to see the name of info providers and you specify according to it and finally in the display of results if you dont want to to display the info provider name then just right click on the 0infoprovider object under rows go to properties then choose hide option under display.
Hope its clear a little..!
Thanks
K M R
**Assigning points is the only way of saying thanks in SDN***
>
venkata prasad wrote:
> Hi K M R,
>
> Thanks for ur quick response. Most of the Infoobjects are common for both infocubes. I didn't understand this sentense "retrict the value with the infoprovider which values you are trying to view".
> Please explian elaborately how to restrict the values speicfic to infoprovider under rows.

Problem while creation of Routing using BAPI "BAPI_ROUTING_CREATE"

Hi.
I am trying to create routing using the BAPI "BAPI_ROUTING_CREATE", when I execute I get the group number and the group counter number in the Export parameters. But it is not saved in the database, when we look at CA03 using the group number system says routing not found.
I am passing "Space" to Bapiflag and i am passing input to tables TASK, MATERIAL ALLOCATON and OPERATION as follows:-
MATERIALTASKALLOCATION-MATERIAL
MATERIALTASKALLOCATION-PLANT
TASK-TASK_LIST_USAGE
TASK-PLANT
TASK-TASK_LIST_STATUS
TASK-TASK_MEASURE_UNIT
OPERATION-ACTIVITY
OPERATION-CONTROL_KEY
OPERATION-WORK_CNTR
OPERATION-PLANT
OPERATION-DESCRIPTION
OPERATION-NUMERATOR
OPERATION-DENOMENATOR
OPERATION-BASE_QUANTITY
OPERATION-STD_UNIT_01
OPERATION-STD_VALUE_01
OPERATION-STD_UNIT_02
OPERATION-STD_VALUE_02
OPERATION-STD_UNIT_03
OPERATION-STD_VALUE_03
OPERATION-STD_UNIT_04
OPERATION-STD_VALUE_04
OPERATION-STD_UNIT_05
OPERATION-STD_VALUE_05
OPERATION-STD_UNIT_06
OPERATION-STD_VALUE_06
Appreciate your replies.
Regards.
Anand Ghawade.

Use BAPI_TRANSACTION_COMMIT after you call the BAPI_ROUTING_CREATE

Problem for creation of PO for different company code

I have problem for creation of PO using ME21 for different company code.Order is not created.
Please give reply it is urgent.

Hi Mansih,
I don´t understand what is your exact problem, as I don´t see any company code being specified. But maybe you should check in XK03 that the vendor master data is created for this company code/purchasing organisation!
Have a nice day!

Problem regarding the creation of Table using CSS.

Hi ,
Here I have a Problem regarding the creation of Table using CSS.
In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
width:900px;
height : auto,
Overflow : visible,
Max-height: : 200px.
If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
Thanks & Regards
Madhavi

Hey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?

Problem in creation of SOAP massage

hi
I am using JDeveloper (version 11.0) to create the proxy classes from WSDL
but i am getting an exception as following
SOAPFaultException
this exception indicate that there is some problem in creation of SOAP massage internally
so can anyone help me to know what is the problem?
If u want to see the code then i can display here.
thanks in advance

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Problem in creation of HUs through FM HU_REPACK and HU_POST

Hi Experts
This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
Please find the example of the HU created in the system
0 10020000038479 S-DISP 1 EA S DISPNSARY
1 0024632192 000004 810062 0.250 KG L0533A4172 Lactose
1 0024632192 000004 810062 24.900 KG L0533A4172 Lactose
Material is 810062
Batch is L0533A4172
Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

Hi Sailaja,
I have similar requirements like this before with HU_PACKING_AND_UNPACKING FM. It was a tough debugging before I came up with the right solution. Unfortunately, I was not able to document that code..
But here is what I have been doing.
Youre on track with the solution below, never use BDC as it will only limit the Handling units that you wish to put into.
The function modules that starts with V5_ plays important role as you need to initialize the global variables and table of this function group with values before calling HU_PACKING_AND_UNPACKING FM
Debug inside the Function module, and look for the FM that returns SY-SUBRC <> 0 then set a breakpoint.
Restart the program then debug inside that FM again (and I do not want to go further on the details, I give you the presumption of literacy)
You will find some items that has no value, try to initialize everything by utilizing the FM for this function group V51S.
Happy Debugging.

Problem in creation of any purchasing doc against plant 0001

Hi MM Experts,
I am facing problem in creation of any purchasing doc (i.e: PR or PO) against plant 0001.This is available in the system and assigned to company code. I can create Material master with this plant 0001 and copy to create new plant. But Can't create any pur doc? also in plant list in pur doc showing the rest of the plant except plant 0001.
I m working on ECC 6.0.
Regards,

Dear Sairam/Steve,
I got solution for my problem. The problem is that address number not maintained for 0001 plant.This solution available from the following note. please go thro...
Note 433997 introduced a new logic for the F4 help for plants.
solution proposed in note 433997 :
To maintain the address number of a plant subsequently, startTransaction OX10 for the affected plant ('Change plants') view. Click the 'Address' pushbutton (envelope) or (shiftF5). In the subsequent screen ('Change address'), press Enter or click the 'Copy' pushbutton and save using the 'Save' pushbutton (disk) or (CtrlS).
Then the plant should have an address number and should also be displayed in the search help.
Thank you all
Regards,

Problem in creation of partner function creation.

Hi all,
During customer Master upload using LSMW direct method, Iam getting this problem.
while creating Sales view using XD01, three partner function VE (Sales Representative), SH (Ship-to party), ZI (Front Office) are getting displayed in the last tab of sales view creation.
Because of some customizing,value for SH is getting populated automatically. But the values for VE & SH are not getting populated from the flat file.
But the values are present in the respective field (KTONR) and able to see in the display convert data.
If I enter the manual value during runtime in LSMW, it accepts the value. Since it involves huge amount of data, manual entry for records is not possible.
Kindly provide the solution.
Regards
Narasingam.B

This problem can be solved by proper customizing.
Regards
Narasingam

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem with Creation of TemSe file...

HI Experts...
Here im facing the problem with creation of # 3 rd Quarters
Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program HINCF240"".
What could be done to overcome the problem.Please advice.
Regards,
V Sai.

Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai.

Problem with creation of jar with external libraries

hi guys, I've no problem with creation of jar,i use this command:
jar -mcf MANIFEST.MF NameFile.jar *.class
my file manifest is this:
Manifest-Version: 1.0
Created-By: Me
Main-Class: NameFile
Now,I've to make a jar file,but i have to use some external libraries in jar format.
I've read on sun tutorial and i've added to manifest this line:
Class-Path: dt.jar formshelp.jar formsrt.jar jh.jar looks-1.3.1.jar substance.jar TableLayout.jar
But the jar file doesn't work, neither with a double click nor with console...
Someone can help me?Thanks!:)

Darkweb wrote:
sorry but,the external libraries that i use are in .jar,what i've to do to include these libraries in my jar?One of 3 things
1) Take them out of the jar, and put them in a folder, preferably a folder in the same folder as the jar
2) Write a custom classloader to load classes from nested jars
3) Extract the contents of all the dependency jars, and jar them all up with your own code
The first is almost always the most preferable, the second one is doable but brittle and resistent to updating dependencies ( you have to release everything for any changes you need, even if it's not a change in your own code ) and the third one is tedious and suffers from the same robustness problems of the second, not to mention that a lot of software licences prohibit you from actually doing it. Do the first one, it's by far the most common and easiest to maintain. I really wouldn't advise the third option, ever, though. Any activity that reduces the modularity of your application is ill-advised

Creation of .ard file

hi all,
Can any body Suggest me regarding my .ard file creation . i am doing like this to create .ard file ie E:\Program Files\SAP\SAP Business One SDK\Tools\AddOnRegDataGen i am going this and creating my .ard file r else any other way to Create .ard file iam following for creation of .ard file other process for this ie when installation wizard running that coding Bin folder D:\Anoop\DEMO\B1AddOnInstallerNET1\B1AddOnInstallerNET1\AddOnRegDataGenFile in one Batch file is their but when iam running this Batch file i am n't getting the .ard file Can u plzz suggest me regarding Creationg this process how to approach this Can u solve this problem regarding this.
Regards
ANAND

Anand,
you can download the Business One Development Tools here:
SAP Business One Tools [original link is broken]
Also, there are recorded Business One Expert Sessions on SDN that demo the usage of our tools. Take a look at them and let me know if they help you understand this process better:
Recording 1:
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/business_one_live_expert_sessions/on_sdn_articles_and_tools_for_add-on_development.zip
You can go to segment "Demo 1", which addresses this topic.
You can download the presentation for this WebEx here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/83138994-0e01-0010-428f-ae6e0af49449
Recording 2 (no in English, but still very good illustrating the creation of an Add-On):
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/business_one_live_expert_sessions/b1de_b1te_add-ons_development_and_certification.zip
You can download the presentation for this WebEx here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/92af3198-0e01-0010-27aa-8859890672c9
If this helps answer your questions, please go ahead and close this thread.
Torsten Budesheim

Facing problem in creation Central contract in SRM 7.0 System

HI Experts,
We have implemented Classic scenario in P2P business application.
We are facing problem in creation Central contract in SRM system as we using SRM 7.0 .
Error show Application error in back-end system (SAP SRM outline agreement* & Differing time interval
Status show Document complited ->Distribution Incorrect >Created>Complate > Released.
Please Reply
Sharad

Hi Sharad
some mapping error with ECC and SRM
expand the COND /BLOARD . you must get some clue - in bd87 51 error code
did you map pricing condition type with ECC and SRM?
kindly check BADI mapping in SRM
Muthu

Problem in creation of ARD using B1DE 1.5

Similar Messages

Maybe you are looking for