Problem in creation of HUs through FM HU_REPACK and HU_POST

Hi Experts
This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
Please find the example of the HU created in the system
0 10020000038479 S-DISP 1 EA S DISPNSARY
1 0024632192 000004 810062 0.250 KG L0533A4172 Lactose
1 0024632192 000004 810062 24.900 KG L0533A4172 Lactose
Material is 810062
Batch is L0533A4172
Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

Hi Sailaja,
I have similar requirements like this before with HU_PACKING_AND_UNPACKING FM. It was a tough debugging before I came up with the right solution. Unfortunately, I was not able to document that code..
But here is what I have been doing.
Youre on track with the solution below, never use BDC as it will only limit the Handling units that you wish to put into.
The function modules that starts with V5_ plays important role as you need to initialize the global variables and table of this function group with values before calling HU_PACKING_AND_UNPACKING FM
Debug inside the Function module, and look for the FM that returns SY-SUBRC <> 0 then set a breakpoint.
Restart the program then debug inside that FM again (and I do not want to go further on the details, I give you the presumption of literacy)
You will find some items that has no value, try to initialize everything by utilizing the FM for this function group V51S.
Happy Debugging.

Similar Messages

Problem in Creation of Handling Units through HU_REPACK and HU_POST FM

Hi Experts
        This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
Please find the example of the HU created in the system
    0     10020000038479     S-DISP     1     EA          S DISPNSARY
    1     0024632192 000004     810062     0.250     KG     L0533A4172     Lactose
    1     0024632192 000004     810062     24.900     KG     L0533A4172     Lactose
Material is 810062
Batch    is L0533A4172
Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

*

Auto PO creation from PR through ME58 problem.

Hi experts.
We are providing facility to our client auto po creation from PR through Me58 transaction code.
I am facing amazing problem is that it is working fine in development client , not working in Quality and Production client , exactly problem is that ME58 u2013 Ordering Assigned Purchase requisition & Process Assignment Create PO , Purchase order cannot be created, PR shift in document overview , it means user want to drag and drop in purchase order then system create PO , this problem I am facing in Quality & Production , but it is working fine in development server there is no need to drag and drop , immediately after Process assignment Create PO , system directly convert PR into PO just only need to check and save PO. I compare everything with development & quality data including material master , source list and everything still I am unable to understand where is the problem , is there any customization settings related to auto po ? pls. suggest any solution to solve this issue.
Kumar

Hi,
Config setting.
Settings for Automatic PO creation is:
1. Select the Automatic PO check box/option in Purchasing view of material master
2. Select the Automatic PO option in the purchasing data view of Vendor master
3. Maintain Purchase info record
4. ME56- Assign the vendors to PR's
5. ME58- Create PO via assignment list(PR-> PO)
6. ME57- Assign and process PR's
7. ME59N - Create PO automatically via PR
Above step by step procedure is involved in the Automatic PO creation.
SAM

I am facing problem document creation the error is Message no. 3G103

i am facing problem document creation the error is Message no. 3G103

Dear Satish,
Usually this error is due to a wrong customizing.
Go through note 1594322 and 179655 will help you to make an analysis of this issue, you should created an excel file for each wage type which should be posted as it is showed in the note.
1594322 Error message 3G103 in RPCIPE00 & RPCIPE01 'Posting balance is
not cleared' 179655 RPCIPE00:Rejectn, employee w.posting bal.not clrd
Best Regards,
Deepak.

Problem in creation of Customer Master

Hi gurus,
I am facing problem in creation of customer master.
I have created a account group zz01 copying from 0001.which has internal no. assignement for the customer.
Now i am trying to create a customer master, at partner functions level under sales area data... the system is asking for the no. for each partner functions.. when i tried to manually enter, the system is not taking any number nor it is letting me save the data.
Please help me out in acertaining, what could be the issue.
regards
Gupta
[email protected]

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Problem in creation of SOAP massage

hi
I am using JDeveloper (version 11.0) to create the proxy classes from WSDL
but i am getting an exception as following
SOAPFaultException
this exception indicate that there is some problem in creation of SOAP massage internally
so can anyone help me to know what is the problem?
If u want to see the code then i can display here.
thanks in advance

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Problem in creation of STO(stock transport order)

hi all SAP gurus,
i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
thnx in advance.
rgrds,
rajesh

Hi Rajesh,
when ur creating STO with UB doc type, then you have to maintain material in both the plants.
Regarding the error which is comming for you, you have to check the settings at
SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
After this you create STO as you are doing and see what the system is prompting.
For any further clarification let me know.
Regards,
NJ

Problem in creation of any purchasing doc against plant 0001

Hi MM Experts,
I am facing problem in creation of any purchasing doc (i.e: PR or PO) against plant 0001.This is available in the system and assigned to company code. I can create Material master with this plant 0001 and copy to create new plant. But Can't create any pur doc? also in plant list in pur doc showing the rest of the plant except plant 0001.
I m working on ECC 6.0.
Regards,

Dear Sairam/Steve,
I got solution for my problem. The problem is that address number not maintained for 0001 plant.This solution available from the following note. please go thro...
Note 433997 introduced a new logic for the F4 help for plants.
solution proposed in note 433997 :
To maintain the address number of a plant subsequently, startTransaction OX10 for the affected plant ('Change plants') view. Click the 'Address' pushbutton (envelope) or (shiftF5). In the subsequent screen ('Change address'), press Enter or click the 'Copy' pushbutton and save using the 'Save' pushbutton (disk) or (CtrlS).
Then the plant should have an address number and should also be displayed in the search help.
Thank you all
Regards,

Problem in creation of order relevant - intercompany invoice

Dear all ,
I am facing problem in creation of intercompany invoice which is sales order relevant . Please tell which settings is required to resolve this as all the settings has been made.
Send ur email id so that the problem can be described if required....
Thanks .........

Hi,
while creating inter company sales order give the delivering plant in the overview screen. so that enables the system and tells that that is inter company sales order . u can verify whether the system takes which sales order whether it is standard order or inter company? by going to the conditions in the item overview in that u can find the "pi01" or "pi02" and select the delivery details there u can find the delivering plant which is supplying plant and the shipping point of the supplying plant..
in case of doubt u can mail me at [email protected]
Reward if Helpful..
Regards,
Praveen Kumar.D

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem on installation of linux through the vmware software on compaq CQ60

Problem on installation of linux through the vmware software on xp operating system. My laptop is Compac CQ60.
The error message is no device found compatable for the installation.

user12190571 wrote:
The error message is no device found compatable for the installation.The question after this kind of information is usually : What is the exact error you got, from who and when you were doing what.

I've kept the old version od imovie (6.0.4) through three migrations and now have it on a mac 10.6.8. i prefer it to the new one, but it has recently begun to give me serious problems. is it becoming obsolete?

i've always thought imovie 6.0.4 was the superior product. i've used it edit semi-profesional films. its easy and intuitive, and always gives you what you want, while looking profesional. i have final cut pro, which i use when i have more time or the project is of more importance, but i still love the ease and simplicity of the old imovie. i've migrated it over 4 computers and it has worked fine till about a week ago. it now takes up to 20 minutes to load, frequently drops out. leaves phantom and relic snipets of audio. is there any way i can fix this problem and keep my beloved imovie 6.0.4? can download it from a third party? are the issues because the .app is going obsolete or are there just new bugs on my computer? i've recently uninstalled all my adobe products and put them onto another computer, could that be it? help me obi won, you're my only hope!

klaus 1,
thanx for the reply. i'm on a 10.6.8 snow leopard.
yes, it did arrive via migration, but had been working well for over 2 years, and two years before that on a 10.5, where it had migrated from a mac book g4 where i used it regularly. through all that time and migration, not a single problem
i can't pinpoint the exact 'original' problem, because i'm currently working on two different editing jobs (one serious [a kickstarted campaign] the other, not so much, for my son's pre-school graduation, i was making the school a little video for their website). so during this time, i'm using a combo of; imovie, adobe premiere and final cut pro. and i've had so much pulsing through my computer (and external hard drives), literally hundreds of gigs of HD video, tons of tiff and jpeg files, and much mp4 and aif music files. i often had three or four major applications all open and running simultaneously, so who knows how this all started. but one day, i flipped open my mac, and just clicked on imovie, not a file mind you, but just the icon, and it took like 2 minutes to load (usually 5-10 seconds). i made sure all other apps and windows were closed and tried it again - now 3 minutes to load and it drops out mid edit. and it just kept getting worse.
AND THEN, AFTER IWROTE ABOVE 'I - ME' MADE THINGS, MUCH, MUCH WORSE.
i was aware that there is an old quicktime 7 that gets installed in a 10.6.8 to supplement the newer quicktime x and the various other programs, including imovie, that still use qt 7. i was a bit confused why there even is an icon for qt 7 in the utilities folder, since you never open it directly, it just works behind the scenes. but whatever.
after imovie started acting up, i looked up to see what programs that imovie uses, thinking the problem might be there and found an article that said there was actually an even earlier version of quicktime, (qt 7.0.3 i think) that was specifically made for imovie, but there hadn't been enough major changes in qt to bother imovie, but (there is always a but) there were changes coming that would begin to affect imovie. since the article (i wish i could link it here, sorry) was a year old, i thought maybe the damaging upgrade was already made. so i found this older version of quicktime (the 7.0.3 version) and tried to install it, thinking it would fix my issue, i'd finish the edit, then delete it. but when i tried to open it, it told me, a newer version of of qt was on my computer and i couldn't install it. so very impulsively and idiotically i uninstalled quicktime 7, thinking i would just reinstall it later. but that's when everything went wrong.
SO I MUST STRESS THIS TO EVERYONE! NEVER NEVER NEVER UNINSTALL QUICKTIME.
apparently quick time x is preinstalled into the 10.6.8, in such a way, that its interconnected with like 12 other programs, that will all begin to act erradictly after it is uninstalled. then those 12 programs will each affect 5 more and soon, your computer, then your hard-drive is blown. i tried reinstalling quicktime, but could not. i tried every conceivable way, but could not even find it in any folder. it was gone. and so was qt x.
so when i uninstalled quicktime 7, it affected quick time x in such a way that it stopped working, then could not be found. then all h**l broke loose. every program began to run slowly and started dropping out. functionally, the computer became so slow, it was useless. even typing became slow. i still did not know about the 'never uninstall quick time rule' yet, so i looked for the problem else where.
i opened up activity monitor, and there were no programs eating up cpu, nothing that suspicious. but when i switched activity monitor to show usage in a descending order, i saw kernel task was using between 500-700% cpu. my fans started running furiously and my battery life dropped in half. i would switch off the computer, start it with reset, things would go well for a half hour, then kernel would spike, the computer would get red hot and the fans would go as fast as propellers. since the kickstarter campaign i was working on was on deadline, i had to keep working. so i went out and bought a laptop stand that allows airflow under the computer and has its own fan to cool the computer, that worked for about a day. but since the fan on the stand ran on power from the usb of my computer, my battery life went from very good, to completely dead. nothing. accidentally unplug the cord for a millisecond second, and the computer turns off. when i restart, the time is set to the day and time i bought the computer, and would undo my internet, and i'd have to reset my whole connection.
i spent twelve straight hours, through the night, using recovery programs, like pacifist, stellar phoenix, and others, but could not get quick time back. finally (like 4 hours ago) i called apple, and although i have no warranty or apple care, they took my call and we tried some things, which didn't work.
i had already run disk utility and exhausted all other options. and i was told by apple that since my computer was preloaded (no discs) i could not, erase and reboot, which wasn't really an option anyway.
so apple being the best run company in the country, sends me a new down loadable version of imovie, quick time 7 and quick time ten.
it hasn't arrived yet, but how cool is that?
i have to say though, i'm a bit worried about reinstalling by disc and have no real guarantee that everything will return to normal.
not to mention my battery is dead and snow leopard gives you no way of getting to it. it has to be replaced at an official apple certified store.
so lesson here, never, ever, never, uninstall quicktime. i hope no one else makes this mistake.
thanx and good luck.

HT4623 Hi, There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be ac

Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.

That is usually a symptom thet the phone was hacked or jailbroken. Was it?

Problem with Creation of TemSe file...

HI Experts...
Here im facing the problem with creation of # 3 rd Quarters
Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program HINCF240"".
What could be done to overcome the problem.Please advice.
Regards,
V Sai.

Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai.

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

Problem in creation of HUs through FM HU_REPACK and HU_POST

Similar Messages

Maybe you are looking for