Problem in customising in service screen

Hi,
In service s screen i am getting a message 'customising
incorrectly maintained"..This is coming due to the entriesin
system table T162V.Can anybody tell where it is maintained.
in customising.
regards,
Tess

i am getting a message when i open the full service screen.becasue the entries in T162V and table control is different
Determine number of lines in customizing tables
DESCRIBE TABLE T162V_TAB LINES     lv_t162vlines.
Determine number of columns in table control
DESCRIBE TABLE TC_VIEW-COLS LINES lv_tclines..
lv_tclines = 6 * lv_tclines.
IF lv_t162vlines NE lv_tclines.
    MESSAGE S729.
ENDIF.
since both are different ,i am getting message.

Similar Messages

My iphone keeps cycling apple logo, it won't power up when connected to a computer. I can power it up with just a power source, but the it comes up to a generic iphone "no service" screen

This phone worked great for 2 years until I inherited it from my partner. Since we changed the phone over to me, it has done this 4 times. The last 3 times it somehow magically came back after taking the Sim card out and putting it back in. I even went and got another new Sim card, in case that was the problem. Apparently it is not, because now I cannot get it to come back at all. I get either the generic gray "no service" screen, or it just cycles the apple logo. I've tried holding the buttons down together, separately, everything. Nothing seems to work. Since the phone is no longer under warranty, am i basically screwed?

Could you specify the model of MacBook and the OS X it's running, please? Some of the advice or references vary along with the system, so this could be helpful to formulate a reply. I've never used a Guest User selection, but do have more than one User.
If the computer does not have an optical drive, you may be able to boot it into a recovery disk mode or something; in an attempt to see what is wrong and maybe fix it.
Good luck & happy computing!

Problem while deploying new logon screen par file via NWDS

hi
i have a problem with deploying .par files out of the NWDS.
i want to change the look of the logon screen in our EP Portal (SAP NetWeaver 2004s).
when i just import the (working one) par file into NWDS and deploy it without ANY changes i get then an error when trying to call the portal:
instead of the logonscreen i get some IView error (like IView: N/A).
if i just copy the par file, and put it back to the pcd, everything works fine.
my problem seems to be the "compiling/deploying" via NWDS.
any suggestions?
i followed the guide:
http://help.sap.com/saphelp_nw04/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
i followed also the BLOG:
Modifying The Logon Par(or customising the Logon Screen)
and the help:
http://help.sap.com/saphelp_nw04/helpdata/en/23/c0e240beb0702ae10000000a155106/content.htm
thanks for your help.
markus

Markus,
If you import the par file using NWDS, most likely you wouldn't import the associated jar files (I think 2 jars) that are originally part of the par file. So, when you make changes and update your custom jar, it would lack the two jars and your application would fail. Try downloading the par file using System Administration -> Support -> PCD Administration -> Browse Deployment..
Save the jar file on desktop and then import it to NWDS.
Hope this helps,
Kiran

HT1414 Could someone plizzzz tell me...I have an iphone4 32G, the problem is a complete black screen I'm unable to reboot it doesn't get picked up by itunes Pc, direct wall socket charging nothing it is got me.. i have tried everything to no avail.

I have an iphone4 32G, the problem is a complete black screen, I'm unable to reboot it doesn't get picked up by itunes Pc, direct wall socket charging nothing happens so it is got me beat?.. i have tried everything but no hope, Has anyone else had this problem? is there a solution, besides having to pay $199 for hardware replacemente... thank you to anyone with info...

bellaluna59 wrote:
So let me get this straight if I pay them [Apple Store] $149
they will replace my device? Is that correct?
Assuming it is in one piece and otherwise meets the conditions for an Out of Warranty replacement, yes.
Conditions are:
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.

Defaulting the Expenditure Type field in OTL self service screens

Hello,
I am having a requirement in OTL to provide the default value for the Expenditure Type in Self Service Screens.
I have tried to set the attribute “HXC_CUI_EXPTYPE2_LOV” by extending the TimecardCO. But it did not work.
Can somebody guide me on this issue?
Regards,
Munish

[ There original post I made is incorrect. The classes/shared libraries need only to be available to the server - they do not need to be available to ALDSP Studio, since the database is access via the server. Double check that the required classes/shared libraries for your jdbc driver are available to your server ]
I searched our CR database for the stacktrace/error that you have and found serveral CR. Most of them indicate the problem was jar file(s) for the jdbc driver were not present in the client classpath. So - whatever you added to the server classpath (and PATH - if there were also shared object libraries) - we need to add those to the ALDSP Studio (eclipse) classpath (PATH).
you can put the jar(s) in
aldsp_3.0\eclipse-plugins\dsp\eclipse\plugins\com.bea.dsp.ide.external_3.0.0
and modifying
aldsp_3.0\eclipse-plugins\dsp\eclipse\plugins\com.bea.dsp.ide.external_3.0.0\META-INF/manifest.mf.
There are two places in manifest.mf you will need to add the jar file - once under Bundle-Classpath and once under Export-Package.
Edited by mreiche at 03/07/2008 10:48 AM

Display problem after update XP service pack 2

Can anyone advice me on the following :
I installed the XP service 2 (Xp pro) on my Satellite Pro 2100 and ever since I have at the right side of the display a black border that is not used of about 2 cm wide.
I've tried installing the latest nvidia geforce driver but that didn't solve the problem.
Before the update my resolution was put to 1024x768 32 bit colors, but now I can only put it to 969 x 768 ? Never heard of this resolution before but now my screen is no longer jumping from left to right.
Anyone any ideas?
Thanks already,
pLippo

Hi pLippo,
it seems the display driver is not compatible to the Service Pack 2. I understand your issue in this way, you have this problem after installing the Service Pack and not before.
In my opinion you could download and install the latest display driver from toshiba (https://eu.computers.toshiba-europe.com) under Support and Download page.
If this doesn't solve the problem you could wait until toshiba releases a new display driver or you uninstall the service pack 2.
Bye Hans

Problem connecting to Web Services server

Hello,
I've had my printer running perfectly since I installed it 3 days ago but today I am nolonger able to use eprint. I can still scan and print from my home PC and laptop but I am unable to send emails directly to the printer now. This was working fine and I used the feature fairly often without error but today no emails arrived. When I logged on to the eprint web site using my google account {Personal Information Removed} the status of the printer said disconnected. I've tried deleting the printer and re-attaching it (which had no effect) and I've now tried disabling web services on the printer then re-enabling it. When I try this I now receive the following error: Problem connecting to Web Services server.
The printer model is a HP Photosmart Premium C310a with the lastest software update. The printer is connected to my network via Wifi and is reachable and usable from all my PC's.
It seems to me that there is something wrong with the software configuration on the printer, the reason I think this is because the screen interface slows down to a crawl after some use and when this happens it is not possible to switch the printer off via the power button. The only solution is to pull the power cable! This is something new and didn't happen before, is there a way to reset to factory default, the option in the menu doesn't seem to reset everything?
Please advise ASAP.
Thanks in advance,
Stuart {Personal Information Removed}

Greetings,
The ePrint Service has been having some issues after the upgrade. The server team has found and fixed a bug in the latest release that affected connectivity. If you're having problems, please unregister your product (from the Web Services menu, select "Remove Web Services"), then register again (from the Web Services menu, select "Enable Web Services).
After reregistering, I have been very successful using both ePrint and the Print Apps using my HP LaserJet CM1415. It has been staying connected, and promptly printing jobs I send to it. It has also been reconnecting after I powercycle. I sincerely hope you have the same experience. We had an ePrintCenter outage a few minutes ago that may have affected connectivity, but I am able to use ePrint and the Print Apps again as of 5:15 Mountain Time.

Stopping the WL service from the Win2k Services screen is a simple "kill"?

I have another question related to WLS as a WinNt service:
If I use the WL console to stop a WL server, it initiates a normal shutdown.
So for example:
<The shutdown sequence has been initiated.> is put in the log.
If I just stop the service in Win2k using the Services screen, nothing is
logged.
I'm just curious if it's normal (so "Stop" is equal to ^C if I start WL from
the command prompt) or there is a problem in my configuraiton.
It's a minor question, but it would be much easier to start/stop WL from the
same place.
BR,
Adam

I have another question related to WLS as a WinNt service:
If I use the WL console to stop a WL server, it initiates a normal shutdown.
So for example:
<The shutdown sequence has been initiated.> is put in the log.
If I just stop the service in Win2k using the Services screen, nothing is
logged.
I'm just curious if it's normal (so "Stop" is equal to ^C if I start WL from
the command prompt) or there is a problem in my configuraiton.
It's a minor question, but it would be much easier to start/stop WL from the
same place.
BR,
Adam

Asked to pay $800 for a corrosion problem started when in service.

Took my late2012 Macbookpro retina to store 3 days ago because of couple deadpixels in the screen.. The guy at the genius bar was really helpful and run couple of tests and said that screen will be replaced under applecare plan with no charge.
Today another guy called me from service, screen has been changed but a power problem appeared after. When they checked it they found a corrosion on logic board. He was telling me that there is liquid connection caused this corrosion. And its users fault.
I couldnt belive it as when i handed my computer it was absuletly running perfect!!
Guy told me it was a chance that the power failure started just after they replaced retina screen.. And he goes, as its like you took your car to mechanic for a problem and other problem appears bla bla bla! I was so angry but just wanted them to mail me a quote..
Now i dont really want to pay $800 for this as i already paid almost $4000 8 months ago..
Any suggestion?
Thank you..

It seems Apple can find liquid, corrosion, damage on just about any Mac computer they fell like. You are not the only one to have this type of thing happen. There is a long thread on it someplace on on this forum. Systems taken in for one problem and then the owner notified they found liquid damage and none of the repair is covered under the warranty. This has happened to people that swear no liquid of any kind had ever been spilt on their Mac.
I think most of it comes from condensation because of the aluminum case and the limited air flow through the system. About the only parts that get any airflow are the fans and the radiator fins the fans blow across.
There isn't much you can do about it except pay to have it fixed or buy something else. Apple has the last word in this situation.

Problem constructing a web service request wich does not include namespace

Hi!
I'm evaluating Flex 3 for a web development.
I'm having problems with a web service invocation.
This is the soap request made with Soap UI:
<soapenv:Envelope xmlns:soapenv="
http://schemas.xmlsoap.org/soap/envelope/"
xmlns:open="
http://www.openuri.org/">
<soapenv:Header/>
<soapenv:Body>
<open:querySoftware>
<open:imei></open:imei>
<open:groupId></open:groupId>
</open:querySoftware>
</soapenv:Body>
</soapenv:Envelope
<mx:WebService id="giService" wsdl="
http://..." result="onResult(event)">
<mx:operation name="querySoftware">
<imei>1<imei>
</mx:request>
</mx:operation>
</mx:WebService>
When invoking operation I get this error:
[RPC Fault faultString="HTTP request error"
faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent
type="ioError" bubbles=false cancelable=false eventPhase=2
text="Error #2032: Error de secuencia. URL: ]
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::faultHandler()[E:\dev\3.0.x\frameworks\project s\rpc\src\mx\rpc\AbstractInvoker.as:216
at
mx.rpc::Responder/fault()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\Responder.as:49 ]
at
mx.rpc::AsyncRequest/fault()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncRequest .as:103]
at
DirectHTTPMessageResponder/errorHandler()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\mes saging\channels\DirectHTTPChannel.as:343]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()
I see that Flex is making the request like the following
wichi is not correct according to Soap UI request:
<querySoftware>
<imei></imei>
<groupId></groupId>
<querySoftware>
How could I construct the request to include the open:
namespace?
Thanks a lot.

I actually worked through this problem yesterday. This thread
should help you:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=60&catid=585&threadid =1377262&enterthread=y

BT Infinity - Problems and Poor Customer Service

Hello,
We are new customers to BT - having only had our Infinity Fibre Optic connection installed into our new home 13 days ago. Since installation, it's become evident that the Hub struggles to maintain any decent wireless connection to the downstairs of the property, often providing download speeds of just 0.2 Mbps or around that figure.
Having run various tests and spoken with BT online, we came to the conslusion that we're suffering from a Wifi Black Spot. However, the advice received was for us to Purchase an second Router / Hotspot in order to fix the connection; which I find absolutely disgusting.
I find it very difficult to fathom that, as new customers who've just recently paid for the installation of this service, we're expected to pay to fix the poor quality of this service. BT off an official Wi-Fi Home Hotspot 500 Kit for £89.99 - so are you seriously telling me that we have to fork out another £90 to fix the substandard service we've received so far?
Especially given how early we are into the contract, I have to say how severly disappointed I am in the service received from BT at all levels. To expect brand new customers to pay to fix problems created by the service is absolutely dispicable, and if these issues are not addressed in a more fitting manner we may be forced to look into taking further action.
I look forward to your responce.
Regards,
Alan

Unfortunately no ISP will guarantee wireless speeds because there are to many variables involved in the transmission of wireless, such as environmental factors of the type of property you have, stone walls, concrete floors etc.
There are a few things you could try to improve things before spending money.
Make sure that "Smart set up" is turned off. see link how to so that
http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
Some devices have a problem with the Homehub dual band having the same SSid (name). Try giving the 2.4Ghz and 5Ghz frequencies different SSids. Just add a 5 to the end of the 5Ghz SSid so you know which is which. Check the 5 GHz Sync with 2.4 GHz: is set to NO.
Once you have done that "forget" the connection on your devices and then restart the devices and log onto both the SSids if the device can use both frequencies. Not all devices cn use 5GHz.
See this link
http://bt.custhelp.com/app/answers/detail/a_id/44798/~/i-have-problems-connecting-5ghz-and-dual-band...
Try downloading and running inSSider or another wireless scanner. This will show you the wireless channels that your Homehub/router is transmitting on as well as the surrounding networks. You want to take a note of the channels in use and change your Homehub onto a channel that is not being used.
See Link how to do that.
http://bt.custhelp.com/app/answers/detail/a_id/14094/~/how-do-i-change-the-wireless-channel-on-my-bt...
See link for inSSIDer
http://www.techspot.com/downloads/5936-inssider.html

Problem with reversal of Service entry Sheet

Hi All,
I am facing a problem with reversal of service entry sheet. The user has posted the document in dec 2009 and now the user wants to reverse the doc. I told the process how to reverse it. But when she is trying to revoke the acceptance, she is getting error log.I told her to reset the posting date to present date.Now she tried to change the doc date but she is getting error as "604 item 010 WBS element ****** budget exceeded year 2009". So i advised her further to increase the budget in the year 2009. Even that solution is not working.
Please help in this regard
Thanks & Regards
Nisha Prasad

Hi,
The user is not authorised to change the budget. The person resposible for this is telling that increasing the budget wont help. can you tell me how to view whether the budget is available for the system in the period or not? Can you please help me in this regard?
Thanks
Nisha

I am facing problem in starting ShellHWDetection service Error code 1075,please help

I am facing problem in starting ShellHWDetection service Error code 1075,please help

Shellhwdetection is a Windows service which stands for Shell Hardware Detection Service.
It provides notifications for AutoPlay hardware events.
System error code 1075 means "The dependency service does not exist or has been marked for deletion."
Please run services.msc, then find Shell Hardware Detection Service, view its dependencies
Make sure the three services are set to running "automatic" in Services.
If this doesn't help, then run sfc to check if there're some missing or corrupted files in system.
Yolanda Zhu
TechNet Community Support

The problem related to wireless service Wi-Fi connectivity Never work properly

Hi
i am bashair from KSA
I have iPhone 5, you update your iPhone to version 6.1.3
The problem related to wireless service Wi-Fi connectivity
Never work properly, you try Method posed but did not succeed..
i need help me please
thanks..

UPDATE
Hey this is totally weird. I haven't done jailbreak at all and I won't But how is possible that default apps such as Safari and Appstore have the problem I've mentioned before and Skyfire works perfectly without any trouble.
So to sum up:
Safari: loading stucks after few seconds on wi-fi, mostly doesn't load pictures
Appstore: loading stucks after few seconds on wifi and it keeps saying "loading"
Facebook and Youtube: doesn't load pictures
SKYFIRE: loads everything without any trouble
and completely everything works on Edge...
So tell me W.T.F. :-D

Problem in enabling the selection screen

Hi ,
I have problem in enabling the selection screen.
i have radio button and based on the radio button i need to make the date field as mandatory.
When i tried this with at selection screen on radio button group XXX, itu2019s not triggering.
Could you please help me by resolving the above problem?
Vijay

Hi,
see the sap documentation
... RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields. If a function code used in the GUI status of the selection screen is specified for fcode, the selection screen processing is affected accordingly.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
Regards,
Venkatesh

Problem in customising in service screen

Similar Messages

Maybe you are looking for