Problem in data transfered

Hello collegues,
I have a problem with distribution of record of data object.
I have a data object A with dependency of other data object B,
We are in the initial load, but no at all records of data object A (with de dependency ok) are transfered to the device.
I tried recovery the data object, but the problem continues, I tried desactivate and activate the rule but the problem continues.
thanks

Hi
The distribution evaluation does not happens on initial load of data for performance reason. For initial load scenario, suggest to activate the rules after completion of initial load.
But if i understood your case correctly:
a- With out dependency: You created distributed rules on both the data object A as well B. Did initial load of both. Then triggered rule activation. In this case records are correctly distributed to receivers.
b- With dependency: In the distribution you created distribution rule on A and dependency by adding B as following data object. In this case you did initial load as well rule activation [since you mentioned deactivation and then activation]. But the records of A (and so records of B too) are not distributed to receivers correctly.
So for correct distribution, need to first ensure that data of A is distributed properly and then check for B.
May be first you can try to regenerate the distribution model, then do rule deactivation and activation.
For A-
If none of the records of A were distributed, then you can check whether the subscription created for receiver is correct or not. This you can check in administration portal under distribution rule administration with view subscription data.
If some records of A were distributed: Then it could be the underlying data that is more matching the required subscription.
For B-
Need to check whether the records of B referred by A [and getting distributed ] are actually downloaded to DOE before the rule activation.
-pradeep

Similar Messages

Using Itunes, I copied all my apps from my Ipod touch to a new Iphone 4. Problem is all the apps on the Iphone are starting up like a new install. I would think my "password" app and "lose it" app would have the past data transferred to the Iphone.

Using Itunes, I copied all my apps from my Ipod touch to a new Iphone 4. Problem is all the apps on the Iphone are starting up like a new install. I would think my "password" app and "lose it" app would have the past data transferred to the Iphone. Is this not possible??

Try this Discussion...
https://discussions.apple.com/message/19529357#19529357

FAQ's, intros and memorable discussions in the Data Transfers Forum

Welcome to the SDN ABAP Data Transfers Forum!
In addition to release dependent information avalaible by:
- pressing the F1 key on an ABAP statement,
- or searching for them in transaction ABAPDOCU,
- using the [SDN ABAP Development Forum Search|https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=&objid=c42&daterange=all&numresults=15&rankby=10001],
- the information accessible via the [SDN ABAP Main Wiki|https://wiki.sdn.sap.com/wiki/display/ABAP],
- the [SAP Service Marketplace|http://service.sap.com] and see [SAP Note 192194|https://service.sap.com/sap/support/notes/192194] for search tips,
- the 3 part [How to write guru ABAP code series|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50] ... (use the search to easily find the other 2 documents...)
... this "sticky post" lists some threads from the ABAP forums as:
- An introduction for new members / visitors on topics discussed in threads,
- An introduction to how the forums are used and the quality expected,
- A collection of some threads which provided usefull answers to questions which are frequently asked, and,
- A collection of some memorable threads if you feel like reading some ABAP related material.
The listed threads will be enhanced from time to time. Please feel welcome to post to [this thread|Suggestions thread for ABAP FAQ sticky; to suggest any additional inclusions.
Note: When asking a question in the forum, please also provide sufficient information such that the question can be answered usefully, do not repeat interview-type questions, and once closed please indicate which solution was usefull - to help others who search for it.
Data Transfers
[The Data Transfer Workbench|http://help.sap.com/saphelp_nw04/helpdata/en/0d/e211c5543e11d1895d0000e829fbbd/content.htm] => Documentation from [help.sap.com] can cover many basic information needs.
Problems with BDC_INSERT => For better answers, please post clear questions with relevant code.
BDC Transaction Vs Session => Different types of BDC, or preferably a BAPI if available.
Data migration procedure and guildlines => An introduction to data migration projects.

Welcome to the SDN ABAP Data Transfers Forum!
In addition to release dependent information avalaible by:
- pressing the F1 key on an ABAP statement,
- or searching for them in transaction ABAPDOCU,
- using the [SDN ABAP Development Forum Search|https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=&objid=c42&daterange=all&numresults=15&rankby=10001],
- the information accessible via the [SDN ABAP Main Wiki|https://wiki.sdn.sap.com/wiki/display/ABAP],
- the [SAP Service Marketplace|http://service.sap.com] and see [SAP Note 192194|https://service.sap.com/sap/support/notes/192194] for search tips,
- the 3 part [How to write guru ABAP code series|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50] ... (use the search to easily find the other 2 documents...)
... this "sticky post" lists some threads from the ABAP forums as:
- An introduction for new members / visitors on topics discussed in threads,
- An introduction to how the forums are used and the quality expected,
- A collection of some threads which provided usefull answers to questions which are frequently asked, and,
- A collection of some memorable threads if you feel like reading some ABAP related material.
The listed threads will be enhanced from time to time. Please feel welcome to post to [this thread|Suggestions thread for ABAP FAQ sticky; to suggest any additional inclusions.
Note: When asking a question in the forum, please also provide sufficient information such that the question can be answered usefully, do not repeat interview-type questions, and once closed please indicate which solution was usefull - to help others who search for it.
Data Transfers
[The Data Transfer Workbench|http://help.sap.com/saphelp_nw04/helpdata/en/0d/e211c5543e11d1895d0000e829fbbd/content.htm] => Documentation from [help.sap.com] can cover many basic information needs.
Problems with BDC_INSERT => For better answers, please post clear questions with relevant code.
BDC Transaction Vs Session => Different types of BDC, or preferably a BAPI if available.
Data migration procedure and guildlines => An introduction to data migration projects.

Fifo communication problem shifted data

Hello,
Currently,
there is a communication between a laptop, equiped with a NI cardbus 8310,
and a FPGA module controlling an industrial device.
However, we have to transfer this program to a more efficient computer.
The data transfered to the FPGA is sent thanks to a FIFO protocol.
Unfortunately, we met several communication problems while using the main program and the FPGA program :
- We have several error messages such as :
-52007
(The most recurrent) : "Called another software component" which
happens when we would like to run the FPGA program and when we stop the
main program.
61046 : a clock error which occurs at close FPGA VI reference.
We tried to solve these problems by creating a small program (without
the FIFO protocol) aiming to test the communication between the
powerfull computer and the FPGA. It worked.
- Then, we created
a program (on the computer) including the FIFO communication to test with the FPGA program. It
roughly worked but the data were shifted. (This program runs on the
laptop but not on the computer)
- Then, we created a
new project just to test the communication. It's a simple program in the
FPGA : when we click on OK button, it increments variables and
transmits them to the host. In the host.vi, when we valid a button, we
say to the FPGA "OK button = true" thus enabling reading of the data
from the FPGA. This program has the same FIFO method as the main program
but it doesn't work. Actually, in debug mode, we can see variables
incrementation but in real time mode, the program blocks in FIFO
reading.
- We would like to mention that we have two versions of Labview : labview v8.6 on the laptop and labview 2009 on the computer.
Hoping that you will be able to help us,
PS : in all test programs, we used the same way to implement the FIFO such as the first program which works on the laptop with labview v8.6.

hello,
Thank you for your answer,
I understand your answer but the problem we have refers to the fifo. In fact, the program runs well on a laptop
but when we run it on another computer, the data from fifo are shifted. We don't understand why?
Morevover, we did another program with fifo communication and the program blocked during the fifo reading
and we just stop it with the abort program button. Do you know why?
We tested the FPGA program with the simulation and it worked normally.
Best regrads
Mathieu

Problem in data loading through UD Connect.

Hello All,
i have problem in data loading...I have created the UD connect source systen and its working properly,then i have created UD Connect InfoSources and DataSources, But when i am trying to create Infopackages then its giving following error..
"Error occurred in the source system" and "no record found".
Thanks
Shivanjali

Hello Shivanjali,
Mostly UDC is used for RemoteCube to access data outside of SAP. What is your external system? Make sure that there is data in the source system.
Please check following links
[Transferring Data with UD Connect|http://help.sap.com/saphelp_nw04s/helpdata/en/43/e35b3315bb2d57e10000000a422035/frameset.htm]
[SAP BW Universal Data Integration SAP NW Know-How Call|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd]
[SAP BW and ETL A Comprehensive Guide|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11e1b990-0201-0010-bf9a-bf9d0ca791b0]
Thanks
Chandran

I have old Macintosh LC that recently passed on, anyone know where I can get this repaired or have the data transferred into something else?

I have an old Macintosh LC that recently went down. I am located in the Portsmouth, NH area.
Anyone know where I can get this repaired or have the data transferred??

How much $$ do you care to spend to transfer the data on the LC's 40 or 80 MB hard drive? The original LC is now 21 years-old and has little if any market value (I know - I have an LC I and an LC III), so professional repair will easily exceed that. It's considered "obsolete" by Apple's authorized repair shops, so parts are not available. Was it starting up normally before it stopped working, and if so, were the date & time always correct after it had been disconnected from an electrical outlet? If not and if startups have been hit or miss for a while, your LC undoubtedly needs a new PRAM battery installed. It's a 3.6-volt ½AA lithium battery and is installed in a black plastic holder w/retainer cover clipped over it on the LC's motherboard. The battery can be purchased at battery specialty retailers for about $8 or less, as well as from a number of online merchants. If you don't mind paying 2-3 times the value of the battery, Radio Shack carries it. If you need directions for installing the battery, post back. It's the least expensive thing to try and a new battery has brought many a dead Mac back from the dead. As for the internal hard drive, it could be removed and installed in a slightly newer, pre-G3 Power Mac having an internal SCSI bus. If there are any thrift stores in your area, you might find a suitable Mac for this purpose. This would involve removal of the hard drive from the LC and installation in the newer Mac, with a slight change in the LC's SCSI address jumper placement. Once installed in the newer Mac, the files could be copied. If this is more challenging than you planned on, you might check your area for a Mac User Group, where you might be able to take your LC and have someone transfer the files for you. After the files have been transferred to another medium, you may have problems trying to open them on a newer Mac running a newer OS version than the LC's (System 7.0, 7.1, 7.5.x, or 7.6), if the programs aren't compatible.

Slow data transfere using card reader for PE8 on Win7 machine

I just migrated (reinstall) my PE8 on a new PC (from old WINXP SP2 to a high end WIN7 64 bit) .
I have a ordinary card reader (USB 2.0) for my SD,SDHC, and XD cards.
Everything works excellent on the new machine except for the data transfere rate. When collecting pictures, or videos for that matter, with PE8 Organizer. What takes minutes in my old XP machine takes hours (hours for real) in the new machine.
Since PE8 is a 32 bit app I have also tried on the new machine to change the compatibility for C:\Program Files (x86)\Adobe\Elements Organize\PhotoDownloader.exe. I tested with running PhotoDownloader.exe just as on the old box winXP SP2 and SP3. But it made no difference.
I also looked in performance monitor. Nothing of interest. I had lots and lots of power left.
So..
Now I'm stuck. Both on the problem cause search. Or finding a solution. Anyone got any good ideas to make progress.

My main overall objective is to look at the pictures and films. Not work with them as a hobby as such. (even if it is quite fun, but very time consuming. And time I do not have)
0. The vast majority of files are .mts and .jpg
1. Step one is to get them into PE8 organizer.
2. Batch organizing jobs like renaming, tagging, minor quick enanhcement etc
3. Some hands on changes or add ons like back ground musik.
in short
¬ 70 % are trivial at level. Using mainly the Auto stuff. Want to being in control picturens and films and making them more viewable by removing junk and pain just adding minor enhancement.
¬ 25 % at low-medium level
¬ 5 % at medium level
I hope this answer your question. My question is, do you have any idea how to solve the issue?

Large data transfers in early morning hours putting me over my data limit

I am getting large data transfers labeled Intranet Media Net from two different Iphones in my home. These transfers occur typically in the early morning hours when we are sleeping and when we should be connected to Wifi. ATT suggested that I turn off the option to send updates to Apple, which I did. However, the charges are still occuring. Last night a 35MB transfer has nearly put my daughter's phone over her 200 MB limit. ATT suggested that I turn off cellular data to eliminate these from occuring, but that seems silly. Plus, who is to say that they won't occur when I turn cellular on, in order to use data when I am outside of a Wifi area? Any help would be much appreciated. I don't know if this is an Apple issue or an ATT issue.

How do you get logs out of a TC anyway?
From the latest one you cannot.. no logs at all so that is the direction Apple is moving.. the black box.. well white box that you feed this into and get that out of.. but all the works inside are complete mystery.. that is the end point.. not quite there yet.
Logs from v5 utility or SNMP.. both still working on any of the earlier TC.
You can install v5 on Mountain Lion.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
Give 7.6.3 firmware the heave ho.. and use 7.6.1 and if the TC is more than 18months old.. round about .. even a Gen4 you can go back to 7.5.2.. which seems more solid again.
As stated above.. by the time you get early Gen3.. they can have board faults. and earlier ones are especially not reliable with power supply faults.

How to delete Master Data transferred from ECC to APO via CIF

Hi, all
I'm connecting SCM 5.1 with ECC 6.0 via CIF.
When activating Integration Model in ECC, the following error occurred;
"Location 0001 of type 1001 (BSG 592BUSGP) already exists in APO"
This is because Location 0001 was already transferred from different ECC client via CIF, and not cleared.
I'm now trying to initialise master data transferred from ECC to APO via CIF, but in vain.
I suppose I have to first delete all master data CIFed from ECC in APO, or have to execute initialisation of APO master data with ECC data in ECC.
Please tell me how to do this.
For details, please read the followings;
I connected APO client with ECC client 590.
I transferred Plant and Material Master from ECC to APO via CIF.
After that, I wanted to change ECC client from 590 to the other.
I created the other client (592) by client-copying from 590 with SAP_ALL copy profile.
I deactivated Integration Model in ECC 590, and activated the same in ECC 592.
Here, I faced the problem.
The initial data transfer failed due to the duplicate of data.
Now I'm wondering how I can initialise master data in APO and transfer initial data from ECC.
Due to testing purposes, I have to change ECC clients from one to the other this time, but I cannot initialise master data in APO and cannot tansfer initial data from different ECC client.
thanks in advance,
Hozy

Hi all,
Thank you very much indeed for lots of your replies.
Thanks to all of your advices, I'm getting to understand what to do.
Well, I'll say I have to create one more client for testing with other ECC clients or I have to rebuild the client by client-copying from 001 and implementing all transportation requests, for marking del flags to each master data and running del programme sound like tough work, and sound like odd ..
Then, I've got next issue here.
In SCM-APO, I use BI objects, and , if I have to create several clients for testing, I have to set up clients where you can use both BI objects and CIFed master data.
I suppose I have to change 'BWMANDT' in RSADMINA and make RSA1 accessable in other SCM clients and implement tests.
Also, I have to register BI System for newly created SCM clients in RSA1-SourceSystem.
Well, if you have any experiences on this kind of use, and if you have any advice on it, please give me any tips.
Particulary, I'd appreciate very much if you give me advice on which way you have chosen; creating several clients or rebuilding the one client in SCM-APO when you use both BI objects, CIFed master data and Demand Planning.
Thanks in advance.
Hozy

Purchased Content and Data Transfers

I had a few questions regarding purchased content (i.e. apps, music, movies) and data transfers:
1. Can you re-download purchased apps for free or do you have to purchase them again?
2. Can you re-download purchased movies and music if the data is lost or do you have to purchase them again?
3. I noticed every time you download a movie it prompts you to backup the data with discs. I practically never use discs and most of the time, I have a large amount of purchased data that simply will not fit on DVD-Rs. Is it possible to backup data via external hard-drives? Is there an export option in iTunes to do this or do you have to go into the physical path which it's located?
4. Can you sync purchased content with multiple devices? For instance, I have a 32GB iTouch and an iPhone, would I be able to sync the same data for both of these devices or am I restricted to one?
5. How many computers can you have data synced with? For instance, I have five computers and a soon-to-be MacBook. How many computers can I have the same data synced up to?
I tried looking around for this information, but didn't have much luck finding it. Apple doesn't seem to clearly define these parameters unless there is a link one of you might have that discusses these issues. Any assistance would be greatly appreciated.
Message was edited by: chris.chin

Hi, welcome to Apple Discussions.
chris.chin wrote:
I had a few questions regarding purchased content (i.e. apps, music, movies) and data transfers:
1. Can you re-download purchased apps for free or do you have to purchase them again?
Redownload for free, assuming still available in the store.
2. Can you re-download purchased movies and music if the data is lost or do you have to purchase them again?
You are not entitled to a repeat download of any media item. Sometimes unfortunate users are granted a one-time only repeat download if they ask nicely but don't count on it.
3. I noticed every time you download a movie it prompts you to backup the data with discs. I practically never use discs and most of the time, I have a large amount of purchased data that simply will not fit on DVD-Rs. Is it possible to backup data via external hard-drives? Is there an export option in iTunes to do this or do you have to go into the physical path which it's located?
Yes, you can backup to external drives or network shares however iTunes has no system for managing this. You just need to copy the files from their source folders, either manually or....
*Fast backup for iTunes library (Windows Only)*
Grab SyncToy 2.1, a free tool from MS. This can be used to copy your entire iTunes library (& other important data folders) onto another hard drive or network share. You can then use SyncToy periodically to synchronise or echo your library to the backup. A preview will show which files need to be updated giving you a chance to spot unexpected changes and during the run only the new or updated files will be copied saving lots of time. And if your media is all organised below the main iTunes folder then you should also be able to open the backup library on any system running the same version of iTunes.
4. Can you sync purchased content with multiple devices? For instance, I have a 32GB iTouch and an iPhone, would I be able to sync the same data for both of these devices or am I restricted to one?
You can sync the content to as many iPods/iPhones/iPads as you like. Each device can hold protected content from up to five different accounts at any one time.
5. How many computers can you have data synced with? For instance, I have five computers and a soon-to-be MacBook. How many computers can I have the same data synced up to?
You can authorise protected content on up to five different computer systems at any one time. Virtual machines count as separate systems as do computers with reformatted drives or, perhaps, certain hardware changes. Ideally you should deauthorise a computer before any major upgrade. If you are no longer able to access one of your systems but need to release the authorisation then, if you have five active authorisations you can deauthorise all of them together, however you may not then repeat this preocess for 12 months.
Protected content can only be transfered to a device when the computer is authorised. Devices may be manually managed from a number of computers but may only be automatically synced with one. Syncing is a one way process as far as media is concerned, library to device, but certain metadata such as play count and rating flows in both direction. With manual managment such metadata is not copied.
I tried looking around for this information, but didn't have much luck finding it. Apple doesn't seem to clearly define these parameters unless there is a link one of you might have that discusses these issues. Any assistance would be greatly appreciated.
No problem, that's what these forums are for... The information is probably spread around a number of support articles but I don't have the individual links to hand. Feel free to ask if you want more details though.
tt2

Problem Retrieving DATA files from Zen To

Has anybody else had this problem?
I moved a bunch of data files to my zen touch. My computer hardri've
failed and now I want to copy the data back.
BUT when I try to do it, I get an error message that I can't remove
the data files.
I called tech support once and they had me "clean" the hardri've --
didn't work. Then he recommended JBHTTP. I downloaded that
(free) and it does work, but I can't remove the files within the file
structure -- and only one at a time.
This is better than nothing, but it will take a long time to remove
all 3000+ files.
I found a recommendation for NotMad on the web, but the free
version will not do data transfers, and I don't want to pay for it
if it isn't going to work.
Has anyone had any similar problems? Any solutions? Any
suggestions?
Please help. I need it. :angry:
JT

I believe via Xtreamer, in the trial version of Notmad, you can also download data files. But it sounds like the same process as JBHTTP i.e. slow and one-by-one.
I've seen before that new drivers and firmware update can fix this. I've also seen that new drivers have broken data retrieval, and reverting back to the install CD drivers have fixed it. It's worth trying.
It's a good idea to check data retrieval on a device once you've copied some files over, just to test. Also never trust important files (audio or data) to an MP3 player as the sole source.

Issue in Data transfers using ALE for E-Recruiting standalone system

Dear Experts,
We have an issue in data transfers using ALE. We are having standalone system where E-Recruiting is maintaind seperately and the version is EHP5.
When we configured iDoc in Sandbox and its working fine. But when it comes to Dev and Quality servers this is not working fine.
we have created iDocs using the following filters.
For Object P: Infotypes 0000, 0001, 0002, 0003, 0006, 0024, 0105.
For Objects O,S: 1032, Subtype: 0010
For Object: 1001, Subtype: A003, A008, A012, B007
For Object O: 1001, Subtype: A002, B002, B003, B012, Tyoe of related object: O,S
For Objects: C, O, S, Subtype: 1000, 1002, 1028
For Object:C, Subtype: 1001, Subtype: A007
When we do the data transfers in Sandbox using PFAL it is transferring the data properly.
But when we do the same iin Dev and Quality servers we are not able to do it and gettign 52, 51 errors.
Here we are facing a strange issue. For some Users when we transfer data it is transferring data but with 52 error messgae.
For some users I am getting 51 error where i could not transfer any data.
For some users, when we tranfer O, S, and P related data is moving but getting mostly 52 error and all the relationships are not moving here for O,S and properly. But P related CP, BP and NA are getting created successfully.
It is happening only in Dev and Quality server and that too some users are able to get transferred but not all.
Where will be the issue? How can we resolve this?
Any help will be appreciable.
Thank you in advance.

Hi Sekhar,
Have a look over these threads.
Errors in ALE data transfer to E-Recruiting.
http://scn.sap.com/thread/1535402
BR,
RAM.

Getting data transfered from old HD to new ones, leaving 2 slots filled . .

Hello,
*(Below is a thread I started in another forum, but, didn't get my final questions answered (see at bottom of this post in BOLD), and am hoping for further help and suggestions. I know there is a lot to read here, but, I think this information will help other novices, such as myself. Thanks!)*
I have 2 new HDs (each 1T) uninstalled, and I have my old HD (160 gigs) currently residing in one of the two slots in my G5. Any ideas on the best way/process to get the data transfered from the old HD to the new ones, leaving my two slots filled with the 2 new drives AND my data from the old HD transfered and intact, with a RAID0 setup?
OR, are there any other suggestions on a good setup with the 2 new HDs??
I'm open to suggestions.
I always back-up on external HDs, so, is their a need for me to worry about setting up a RAID0??
I'm doing video processing for DVD release.
Should I just max out the 2x1T gig HDs and not worry about a HD failure??
All Suggestions welcomed!!
Thanks, Jack
*FROM THE CUTTERMAN:*
You are limited with only 2 drive slots. In this scenario what usually works best is a small fast drive (eg Velocirapter or SSD) for OSX/Applications and a large drive for video files. It is not advisable to have the operating system running from a striped array.
Since you already have the drives, here is what you can do.
Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions. Be sure that it is GPT-formatted so it can boot.
Use CarbonCopy Cloner to copy your current OSX partition to the new one.
Set the startup disk as the new partition.
Remove the old drive and replace it with the second new one.
Reboot, and partition/format new drive.
*Hey Cutterman,*
Thanks for the advice. That sounds like a good set-up. I'll have to research the process of doing what you've advised, but, should work out ok:
A. Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions:
1. Partitions are done under Disc Utilities correct? Never done it before; will take a look.
B. Be sure that it is GPT-formatted so it can boot.
2. GPT is also done under Disc Utilities, correct? Here I start to get a bit confused, as I've formatted Extended Journal, SO, the partition with the OSX & Applications is formatted GPT, and the rest of the HD is formatted as Extended Journal?
C. Use CarbonCopy Cloner to copy your current OSX partition to the new one.
3. So, I partition the first new HD and use Carbon Copy Cloner (also under Disc Utilities) to copy the OSX & Applications from my original HD to the first new HD, correct?
D. Set the startup disk as the new partition.
4. This will be an option when I setup the partition???
E. Remove the old drive and replace it with the second new one.
F. Reboot, and partition/format new drive.
5. QUESTION: So, you recommend not striping the HDs: If I do a RAID 1, which sets up a mirror of the HDs, and since the first new HD is partitioned with the OSX & Applications, AND is set up as the Startup Disk, then the second new HD will also mirror that?? Another QUESTION: Even if the second new HD does not mirror the OSX & Applications, the second HD will only mirror the space/partition not utilized by the OSX & Applications partition, correct?
Thanks for your help!!
Jack
*FROM THE CUTTERMAN:*
OK I will try to answer your questions. To begin, if you want to mirror the 2 drives then you will need to boot from the SL install DVD or an external (USB/firewire) drive to set it up. IMO for your purposes it is too much hassle and a waste of HD space.
1) Yes partitions are created in Disk Utility
2) Yes, you choose a volume Scheme (ie number of partitions) and size them by dragging the separator bar. Then select the planned boot partition and click Options..., then choose GPT. I think it is usually the default but check and make sure. Extended journaled is the usual format.
3) You need to download Carbon Copy. It is a free tool that will copy the entire image of your current system partition to the new one and make it bootable. Consider making a donation as it is a very useful and frequently updated utility. It is fairly intuitive to use. You can also use the restore feature in Disk Utility but I have had more experience with Carbon Copy.
4) Once the copy process is finished the new boot partition will show up under the startup disk selections (this tool is in System Preferences).
*FROM 666Sheep:*
If may i correct one thing: OP, don't choose GPT (GUID Partition Table). You got PPC Mac (G5), so valid partition type for you is Apple Partition Map (APM).
GPT is for Intel Macs and you will not able to boot from this kind of partition.
*FROM THE CUTTERMAN:*
Thanks for the correction- my bad. No familiarity with non-Intel Macs.
G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD
*Hi All,*
*Since this process will come to a head on Tuesday/Wednesday, and I hope to be successful in transferring Old HD data to new HD/s.*
*A: I'm still a little foggy here, as I thought I'd set up the 2 new T-gig HDs so that if one of them failed, I'd still have the data backed up on the other HD; more ideas concerning this would be reassuring:*
*WHAT DOES "IMO" mean?*
*(IMO for your purposes it is too much hassle and a waste of HD space.)*
*As I understand the points made: After I partition the first new HD, and Carbon Copy data from old HD, I then install second new HD, and this will just act as an overflow from the first partitioned HD, correct? Because, if set up a Raid1/Mirror, the OSX partitioned portion of the first new HD will not copy to the second new HD, and that space on the second new HD will be wasted, correct?*
*Also: I have to set up RAID1 (if I do not set up RAID0), correct?*
*RAID 1*
*From WIKI: RAID 1 mirrors the contents of the disks, making a form of 1:1 ratio real time mirroring. The contents of each disk in the array are identical to that of every other disk in the array. A RAID 1 array requires a minimum of two drives.*
*Carbon Copy is a free tool that will copy the entire image of your current system partition to the new one and make it bootable.*
*1. Is my old HD partitioned? Is that done automatically by MAC prior to PC purchase?*
*2. Do I Carbon Copy the whole old HD or just parts? (eg. OSX, Photo Shop, After Effects, Various Files)*
*3. I read that it is necessary to DEACTIVATE Photo Shop (I have CS3) prior to doing Carbon Copy. Is that correct? If so, does this also apply to other Adobe applications? Such as After Affects, Illustrator??*
*Thanks to all for the help!!*
*G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD*

Confusing Information:
A1: You also want to make sure the drive you are backing up to is formatted Mac HFS Extended (HFS+) if using Mac OS 8.1 or above.
A2: On PowerPC Macs, your clone should be partitioned as Apple Partition Map.
*Q? I thought the new HD (1T) should be formatted in Extended Journaled?*
B: Also disable Spotlight (in 10.4 only) on your destination drive using Apple menu -> System Preferences -> Spotlight -> Privacy to add the destination drive to the pane.
*Q? I'm using 10.4.11, so, I should follow these instructions?*
C: If possible, boot into safe mode to perform the backup (holding the SHIFT key at startup). In addition, you can clone while logged into another administrative user that you don't use at all to avoid further complications of changes which may be happening to your regular user (though don't use Fast User Switching to get into that other user, since that other user is still active when fast user switching is used). Otherwise you are going to be running a backup on a live system which could have changes happening while you are attempting to backup. These may yield an imperfect clone, with uncertain success at recovery. It may be possible that your clone will have its own hardware issues, so make at least two copies.
*Q? ?????????????*
*I GOT THE ABOVE INFO. FROM THE FOLLOWING SITE:*
Making a clone/mirror/duplicate backup
http://www.macmaps.com/backup.html#SHORTANDEASY
*ALSO, WHAT DO YOU THINK ABOUT THE ADVICE ON THIS PAGE:*
http://www.levoltz.com/2010/04/21/how-to-transfer-data-to-your-new-hard-drive/

Problems with File Transfers Over Firewire 800

Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)

Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Problem in data transfered

Similar Messages

Maybe you are looking for