Problem in designer 6i with translated version of wsglm package
By developing WEB-PL/SQL app
after replacing wsglm package CGENW61\CVWETC\wsglm.pks,
by CGENW61\CVWETC\wsglmsk.pks in my PL/SQL Toolkit schema,
wsgl package compiles with errors,
PLS-00452: Subprogram *** violates its associated pragma,
what to do to run it correctly?
Thanks a lot.
Hi Abraham,
On Metalink if found DocID: 119560.1:
. fact: Oracle Designer 6.5.40
. fact: CASEWSG - PL/SQL Web Generator
. symptom: Installation of Designer Web PL-SQL Generator fails
. symptom: PLS-00452: Subprogram 'BUILDWHERE' violates its associated pragma
. symptom: Package body WSGL is invalid
. symptom: Package body WSGJSL is invalid
. symptom: This error does not occur when using the standard English WSGLM.PKS package.
. cause: <Bug:1613863>
- Missing PRAGMA RESTRICT_REFERENCES in WSGLM<lang>.pks
fix:
Find the file WSGLM<lang>.pks (e.g. WSGLME.pks in case of Spanish, WSGLMHU.pks in case of Hungarian language) in <ORACLE_HOME>\CGENW60\CVWETC directory and modify it by adding the following line at the bottom (before the 'END;' statement) :
PRAGMA RESTRICT_REFERENCES(WSGLM, WNDS, WNPS, RNDS, RNPS);
Please make sure there is always a safety copy of the original WSGLME.PKS in case a rollback is needed.
Regards,
Marcel
Similar Messages
-
RubyCocoa problem seeing Ruby Gems with two versions of ruby
Hi all,
As a Ruby and RubyCocoa newbie I am confused by one particular mess that I seem to have gotten myself in to.
If I understand what is going on at my end, my Leopard installation has two versions of Ruby installed: on the one hand I have Ruby 1.8.6 with a whole host of gems installed, and then XCode 3 seems to use a separate Ruby 1.8 installation as part of RubyCocoa.
Now I have previously written some code, which uses XMLsimple, and which runs fine in my Ruby 1.8.6 setup. However the same code will not run when I bring it in to a simple RubyCocoa app that I am experimenting with. The problem seems to be that the xmlsimple gem is not installed; I get the following Load Error message:
`gemoriginalrequire': no such file to load -- xmlsimple (LoadError)
from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:27:in `require'
Now I assume this means that the gem is missing under the Ruby 1.8 installation that RubyCocoa uses; since I have verified that the xmlsimple gem is available to the Ruby 1.8.6 installation.
My question is therefore how can I install xmlsimple under this Ruby 1.8 installation. The standard 'sudo gem install xml-simple' obviously installs the gem under my default Ruby 1.8.6.
I hope someone can help with what I am sure will turn out to be very simple question borne out of my own inexperience!
Thanks in advance.
BHi all,
As a Ruby and RubyCocoa newbie I am confused by one particular mess that I seem to have gotten myself in to.
If I understand what is going on at my end, my Leopard installation has two versions of Ruby installed: on the one hand I have Ruby 1.8.6 with a whole host of gems installed, and then XCode 3 seems to use a separate Ruby 1.8 installation as part of RubyCocoa.
Now I have previously written some code, which uses XMLsimple, and which runs fine in my Ruby 1.8.6 setup. However the same code will not run when I bring it in to a simple RubyCocoa app that I am experimenting with. The problem seems to be that the xmlsimple gem is not installed; I get the following Load Error message:
`gemoriginalrequire': no such file to load -- xmlsimple (LoadError)
from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:27:in `require'
Now I assume this means that the gem is missing under the Ruby 1.8 installation that RubyCocoa uses; since I have verified that the xmlsimple gem is available to the Ruby 1.8.6 installation.
My question is therefore how can I install xmlsimple under this Ruby 1.8 installation. The standard 'sudo gem install xml-simple' obviously installs the gem under my default Ruby 1.8.6.
I hope someone can help with what I am sure will turn out to be very simple question borne out of my own inexperience!
Thanks in advance.
B -
Audio problem on IPad/IPhone with last version of Edge
Hi,
I am developing a website with Adobe Edge. The site contains audio. There are no problems on different browsers (Chrome, Safari, Firefox, Explorer) on the PC and on Android, but the audio does not work on iPad and iPhone. I then tried with a very simple application (a button with the click event that does play an mp3), but that does not work. My brother who has a previous version to the latest (generates file preload.js), the same simple application works on iPhone and iPad. Do you have any help from me.
Thanks in advance,
Best regards.The patch (EA 2014.1.1) with the fix is live now.
Regards,
Vivekuma
Edge Animate Team -
The bookmark problem occurs when I am creating a bookmark. When it occurs, the page is saved to another folder that was recently accessed, and random other folders' names are changed to the same name as the folder where the new bookmark was incorrectly saved.
The browser crashes only shortly after I open it, and I am closing a tab.Bookmarking with Ctrl+D will bookmark to previously chosen folder.
'''Bookmarking with the bookmark star''' will bookmark to "Unsorted Bookmarks" folder (default), unless you have modified behavior with an Extension. The "[https://addons.mozilla.org/firefox/addon/3880/ Addbookmark Here2]" extension has some [http://dmcritchie.mvps.org/firefox/addbookmarkhere2.txt options] that might be confusing and are optional for those who are looking for old behavior.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>
Please post only one question in a post, people looking for answers are going to be confused when looking for answers to either problem. For the secondary problem a Google search on [http://www.google.com/search?num=100&hl=en&newwindow=1&q=site%3Akb.mozillazine.org+-intitle%3Atalk+-inurl:%22/index.php?title=%22+-inurl%3A%22%2Findex.php%3Ftitle%3D%22+crashes+-intitle:talk&btnG=Search crashes] in the MozillaZine KB may help, particularly the first two hits. (I put the easiest to work with first).
* '''Problematic extensions''' - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Problematic_extensions
* '''Firefox crashes''' - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Firefox_crashes -
Datasource creation problem in 7.0 with demo version?
hi friends,
i installed netweaver demo version.
i created infoare and info objects
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
in left panel i selected datasources , i went in right panil, i am unable to find create application component, its shoing options replicate metadata. how can i create application component, please help me.
regards
suneel.if the datasource is pointing to a R/3 source system, you cant create a application component - rather you need to replicate it. So make sure you are seeing the datasources in flat file source system - Icon with X mark (choose source system - in the top panel of icons)- click on it and select file system - then clcik on it and it will give you a option to create a AC
-
Problems calling designated country with Skype Pre...
Greetings -
I am new to Skype and subscribed to Skype Premium about a month ago and designated Belgium as the country for my unlimited calls. When I try to call a number in Belgium, a window pops up and indicates that I need to purchase Skype credit in order to complete the call. I have tried to make several calls, but they do not go through and they are logged in my call history for 0:00 minutes each at a $0.00 cost. My profile has Belgium properly designated.
Any advice on how I can fix this?
Jeff
Solved!
Go to Solution.jp1450 wrote:
Any advice on how I can fix this?
Hello Jeff,
The message you are receiving indicates that you are attempting a call not covered by your Plan. In the case of Belgium only calls to landlines are included (not cellphones).
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
Problems with translated text in captivate 7
I want to create a multilingual e-learning version. I can translate all texts. Unfortunately I can not change the selected text in the pop up window. I have no idea how I can change this text. Can someone give me a tip.
Hellou guys, Somethink similar: After installing 7.0.1 patch the project created 7.0, lose translated text inside Succes/Failure etc. captions and show default English texts, for example in quizes captions. Hmmm... In preferences dialog default labels are still translated, but after publishing project, the captions are English. So I used trick - Find/Replace dialog - and change manually all text captions with translated version. After publishing works fine. When I create new project directly in 7.0.1, there are no problem Perhapse, small bug. Can live with it because the new enhacements inside 7.0.1 is much important.:)
best regards
Yarik -
Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices. Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved. There was a problem reading this document (21)." The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
ADF 12c Rendering Problems at design time
Hi all,
I am experimenting the following unexpected rendering problems at Design time with JDEV 12c:
- Sometimes a complete page is showed empty or blank but the components exists on the page (you can see them in the structure panel) and the page has no warnings.
- Sometimes I cannot click a component because it is behind the container.
- Sometimes the containers are rendered in other place on the page.
- Sometimes the containers not stretching
I remember some posts about this problem in 11.1.2.x but I think it was not fixed in 12c. For this reason, I have some questions:
What is the "real" memory requirement of Jdev 12c to avoid render problems?
What is the best configuration in jdev.conf?
Is it only a memory issue or Is it also a dependency reference problem? According to a blog post of Frank Nimphius:
Though with Oracle JDeveloper 11g the problem of the IDE not rendering JSF pages properly in the visual editor has become rare, there always is a way for the creative to break IDE functionality. A possible reason for the visual editor in JDeveloper to break is a failed dependency reference, which often is in a custom JSF PhaseListener configured in the faces-config.xml file. To avoid this from happening, surround the code in your PhaseListener class with the following statement (for example in the afterPhase method)
public void afterPhase(PhaseEvent phaseEvent) { if(!ADFContext.getCurrent().isDesigntime()){ ... listener code here ... } }
The reason why the visual editor in Oracle JDeveloper fails rendering the WYSIWYG view has to do with how the live preview is created. To produce the visual display of a view, JDeveloper actually runs the ADF Faces view in JSF, which then also invokes defined PhaseListeners. With the code above, you check whether the PhaseListener code is executed at runtime or design time.If it is executed in design time, you ignore all calls to external resources that are not available at design time.
source:
https://blogs.oracle.com/jdevotnharvest/entry/when_jdeveloper_ide_doesn_t
if it is a known problem, then Why is not fixed in 12c?
Jhon
Jdev 12cJhon, what Frank mentioned can't be fixed from the outside. You or the developers who use phase listens without thinking about the design view are the ones to fix this. Frank provided you with the solution for this.
However, we don't know if you use any self written phase listener. If you don't do this you have another problem. I do see some of your symptoms but can't reproduce them at the moment. As long as we can't reproduce the problem somehow it's difficult to to get a solution.
My advise is to keep your eyes open (add I do) and whenever you can reproduce this behaviour come back and tell us about it. It's hard or impossible to give the 'best' settings for Jdev.conf as they depend on other factors e.g. operating system, memory, other applications running at the same time and many more.
Personally I don't change the parameters as long as I can't put the problems to low memory (which I can't at the moment).
Timo -
Problem Launching Java Applet with Plug-in: Version 1.4.2_01
Hello out there:
I recently installed j2re-1.4.2_01 on my home computer but have been unable to access Web sites emmploying JAva applets. The following is an email exchange with Jeff Hall of Lowell Observatory, manager of an educational site hosted by Lowell, trying to resolve my problem. The messages are better understood if read in reverse order.
I'm hoping that someone will recognize the source of my problem and can recommmend a solution. I would appreciate any help offered.
Thanks,
Mike Coucke
Hi Jeff:
Well, I guess the problem lies with me somewhere. Here's my answer/status to your questions/suggestions:
1) I'm using MS Windows Me version 4.90.3000
2) I do have the directory C:\Windows\.jpi_cache\jar\, but the only thing in it is an empty folder labeled "1.0". The file LP.jar does not exist anywhere on my hard drive.
3) I tried several game sites that utilized Java applets and got the same results: the Java cup in the upper left corner followed a few seconds later by the red "X". So, evidently the problem is somewhere on my end.
I'm going to post our email exchanges in a Java Users Forum managed by Sun to see if anyone out there can solve my problem. However, if you have any more suggestions, I'll be glad to try them.
Thanks for the help.
Mike Coucke
[email protected]
----- Original Message -----
From: "Jeffrey Hall" <[email protected]>
To: "'Mike Coucke'" <[email protected]>
Sent: Friday, September 05, 2003 1:02 PM
Subject: RE: Registration with Lowell Education Online
Mike,
Rats! What version of Windows are you using? It's a little strange to
see the user directory set to C:\Windows; if you're using XP, I'd expect
it to be something like C:\Documents and Settings\Mike Coucke. In any
event, the output that is of concern is these two lines:
java.lang.ClassNotFoundException: LPRemote.class
Caused by: java.net.UnknownHostException: proxy
It looks like your browser is not finding our server's IP when it comes
time to download the necessary Java code.
LPRemote.class is the fundamental code that runs LOPARC, and your
browser should be downloading it automatically when you click connect.
LPRemote.class is stored along with a bunch of other classes in a file
called "LP.jar" that you download from our server. So, if you go to C:
in Windows Explorer and do a file search for LP.jar, you should find it.
On my machine, it's stored in a directory called ".jpi_cache\jar\" in my
user home directory. Let me know if you have this file, or the
jpi-cache directory.
One other thing you might try is going to a different site that you know
uses Java applets -- I think some of the online game rooms at Yahoo use
Java. See if other sites that use Java load correctly. Then we'll know
if it's our server specifically, or a more general problem on your end.
Jeff Hall
Lowell Observatory
Hello Jeff:
I still have the Java "blues". I followed your instructions, but am still unable to launch a LOPARC session. After an initial failure, I uninstalled all three Java versions I had (1.4.0, 1.4.1, 1.4.2), then reinstalled 1.4.2_01 from the Sun website.
Now, when I try to launch LOPARC, I initially get a blank window with the Java cup in the upper left corner. After about 20 seconds, the cup changes to a red "X". During those 20 seconds, the following appear in the IE message bar at the bottom of the window: "Applet LPRemote notinited" (their spelling) which changes to "Loading Java Applet Failed..." when the red "X" appears.
Following is a copy of the log from my Java Console during all of this:
Java(TM) Plug-in: Version 1.4.2_01
Using JRE version 1.4.2_01 Java HotSpot(TM) Client VM
User home directory = C:\WINDOWS
Proxy Configuration: Manual Configuration
Proxy: http=proxy,https=proxy,ftp=proxy,gopher=proxy
Proxy Overrides:
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class LPRemote.class not found.
java.lang.ClassNotFoundException: LPRemote.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.UnknownHostException: proxy
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.net.www.http.HttpClient.privilegedOpenServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.<init>(Unknown Source)
at sun.plugin.net.protocol.http.HttpClient.New(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.createConnection(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
I followed this up by executing the following three console commands:
"dump system properties"
"dump classholder list"
"dump thread list"
and obtained the following listings:
Dump system properties ...
acl.read = +
acl.read.default =
acl.write = +
acl.write.default =
application.home = C:\PROGRA~1\JAVA\J2RE14~1.2_0
awt.toolkit = sun.awt.windows.WToolkit
browser = sun.plugin
browser.vendor = Sun Microsystems, Inc.
browser.version = 1.1
deployment.javaws.cache.dir = C:\WINDOWS\.javaws\cache
deployment.javaws.jre.0.enabled = true
deployment.javaws.jre.0.location = http://java.sun.com/products/autodl/j2se
deployment.javaws.jre.0.osarch = x86
deployment.javaws.jre.0.osname = Windows
deployment.javaws.jre.0.path = C:\Program Files\Java\j2re1.4.2_01\bin\javaw.exe
deployment.javaws.jre.0.platform = 1.4
deployment.javaws.jre.0.product = 1.4.2_01
deployment.javaws.jre.0.registered = true
deployment.javaws.version = javaws-1.4.2_01
deployment.system.cacerts = C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\security\cacerts
deployment.system.home = C:\WINDOWS\Sun\Java\Deployment
deployment.system.jssecacerts = C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\security\cacerts
deployment.system.profile = C:\WINDOWS
deployment.system.security.policy = file:/C:/WINDOWS/Sun/Java/Deployment/security/java.policy
deployment.user.cachedir = C:\WINDOWS\Application Data\Sun\Java\Deployment\cache
deployment.user.certs = C:\WINDOWS\Application Data\Sun\Java\Deployment\security\deployment.certs
deployment.user.extdir = C:\WINDOWS\Application Data\Sun\Java\Deployment\ext
deployment.user.home = C:\WINDOWS\Application Data\Sun\Java\Deployment
deployment.user.jssecerts = C:\WINDOWS\Application Data\Sun\Java\Deployment\security\deployment.jssecerts
deployment.user.logdir = C:\WINDOWS\Application Data\Sun\Java\Deployment\log
deployment.user.profile = C:\WINDOWS\Application Data
deployment.user.security.policy = file:/C:/WINDOWS/Application%20Data/Sun/Java/Deployment/security/java.policy
deployment.user.tmpdir = C:\WINDOWS\Application Data\Sun\Java\Deployment\cache\tmp
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
file.separator.applet = true
http.agent = Mozilla/4.0 (Windows Me 4.90)
http.auth.serializeRequests = true
https.protocols = SSLv3,SSLv2Hello
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = C:\PROGRA~1\JAVA\J2RE14~1.2_0\classes
java.class.version = 48.0
java.class.version.applet = true
java.endorsed.dirs = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\endorsed
java.ext.dirs = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\ext
java.home = C:\PROGRA~1\JAVA\J2RE14~1.2_0
java.io.tmpdir = C:\WINDOWS\TEMP\
java.library.path = D:\PROGRAM FILES\INTERNET EXPLORER 6;.;C:\WINDOWS\SYSTEM;C:\WINDOWS;D:\PROGRA~1\INTERN~1;;C:\WINDOWS;C:\WINDOWS\COMMAND
java.protocol.handler.pkgs = sun.plugin.net.protocol|sun.plugin.net.protocol
java.runtime.name = Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version = 1.4.2_01-b06
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.4
java.util.prefs.PreferencesFactory = java.util.prefs.WindowsPreferencesFactory
java.vendor = Sun Microsystems Inc.
java.vendor.applet = true
java.vendor.url = http://java.sun.com/
java.vendor.url.applet = true
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.4.2_01
java.version.applet = true
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 1.4.2_01-b06
javaplugin.maxHeapSize = 96m
javaplugin.nodotversion = 142_01
javaplugin.proxy.config.list = http=proxy,https=proxy,ftp=proxy,gopher=proxy
javaplugin.proxy.config.type = manual
javaplugin.version = 1.4.2_01
javaplugin.vm.options = -Djava.class.path=C:\PROGRA~1\JAVA\J2RE14~1.2_0\classes -Xbootclasspath/a:C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\plugin.jar -Xmx96m -Djavaplugin.maxHeapSize=96m -Xverify:remote -Djavaplugin.version=1.4.2_01 -Djavaplugin.nodotversion=142_01 -Dbrowser=sun.plugin -DtrustProxy=true -Dapplication.home=C:\PROGRA~1\JAVA\J2RE14~1.2_0 -Djava.protocol.handler.pkgs=sun.plugin.net.protocol
line.separator = \r\n
line.separator.applet = true
os.arch = x86
os.arch.applet = true
os.name = Windows Me
os.name.applet = true
os.version = 4.90
os.version.applet = true
package.restrict.access.netscape = false
package.restrict.access.sun = true
package.restrict.definition.java = true
package.restrict.definition.netscape = true
package.restrict.definition.sun = true
path.separator = ;
path.separator.applet = true
sun.arch.data.model = 32
sun.boot.class.path = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\rt.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\i18n.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\sunrsasign.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\jsse.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\jce.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\lib\charsets.jar;C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\classes;C:\PROGRA~1\JAVA\J2RE14~1.2_0\lib\plugin.jar
sun.boot.library.path = C:\PROGRAM FILES\JAVA\J2RE1.4.2_01\bin
sun.cpu.endian = little
sun.cpu.isalist = pentium i486 i386
sun.io.unicode.encoding = UnicodeLittle
sun.java2d.fontpath =
sun.net.client.defaultConnectTimeout = 120000
sun.os.patch.level =
trustProxy = true
user.country = US
user.dir = C:\WINDOWS\Desktop
user.home = C:\WINDOWS
user.language = en
user.name = Michael G. Coucke
user.timezone =
user.variant =
Done.
Dump classloader list ...
codebase=http://kraken.lowell.edu/, key=http://kraken.lowell.edu/,IONJava/classes/ion_16.jar,IONJava/classes/LP.jar, zombie=false, cache=true, refcount=1, info=sun.plugin.ClassLoaderInfo@109de5b
Done.
Dump thread list ...
Group main,ac=11,agc=2,pri=10
main,5,alive
AWT-Windows,6,alive,dameon
AWT-Shutdown,5,alive
Java2D Disposer,10,alive,dameon
AWT-EventQueue-0,6,alive
Group Plugin Thread Group,ac=3,agc=0,pri=10
Main Console Writer,6,alive
AWT-EventQueue-1,6,alive
TimerQueue,5,alive,dameon
Group http://kraken.lowell.edu/-threadGroup,ac=2,agc=0,pri=4
thread applet-LPRemote.class,4,alive
AWT-EventQueue-2,4,alive
Done.
I'm not a Java expert, so this may be more information than you ever wanted to see.
Once again, I hope that you can help. My experience has been that I usually have some obscure option set incorrectly and that causes me great grief.
Thanks fo your help,
Mike Coucke
[email protected]
----- Original Message -----
From: "Jeffrey Hall" <[email protected]>
To: "'Mike Coucke'" <[email protected]>
Sent: Thursday, September 04, 2003 11:48 AM
Subject: RE: Registration with Lowell Education Online
Hi Mike,
Try it now. I think this problem has arisen because Sun just
released a new version of the Plug-in (1.4.2), and when we released the
public beta of LOPARC, only one relevant version (1.4.0) was available
and the LOPARC code was written to look for that by default. I have
just recoded the relevant routines so they should now cause your browser
to simply pick up the latest 1.4 version of the Plug-in you have
installed, whatever it is. I "broke" Java on my machine to replicate
your problem, and the code I inserted today did fix it. Hopefully it
will have the same effect for you. I am running IE 6 and plugin
1.4.2_01 (as accessed via Tools->Sun Java Console).
One broader problem: some (non-LOPARC-specific) users on the Sun
forums have reported the "JRE collision" you are seeing when multiple
versions of the Plug-in are installed on the same machine. So if the
fix I made to our code doesn't work, one option would be to uninstall
all Java components from your computer and do a fresh install of the
latest runtime environment.
Let me know how/if this works. Thanks for the feedback and for your
patience.
Best regards,
Jeff Hall
Lowell Observatory
-----Original Message-----
From: Mike Coucke [mailto:[email protected]]
Sent: Wednesday, September 03, 2003 6:30 PM
To: [email protected]
Subject: Re: Registration with Lowell Education Online
Hello Jeff:
So far, I have been unable to launch a LOPARC session. I repeatedly
get the following error message:
"Exception: java.lang.ClassNotFoundException: LPRemote.class"
My browser is MS Internet Explorer version 6.0.2800.1106 Initially I was
using Java Plug-In version 1.4.1 and received the error message. I went
to the Sun website and downloaded/installed Java Plug-In version 1.4.2
and still get the message.
Before I try to launch LOPARC, I can select Tools->Sun Java Console from
IE's pull down menu to check my Java Plug-In version. When I try to
launch LOPARC, I get the following message:
"Applet(s) in this HTML page requires a version of Java different from
the one the browser is currently using. In order to run the applet(s)
in this HTML page, a new browser session is required, press 'Yes' to
start a new browser session." If I select 'No', I get the following
message: "Java Plug-in detected JRE collission"
If I select 'Yes', a new browser window opens and then I get the first
message above.
Can you help?
Mike Coucke
[email protected]
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Monday, September 01, 2003 5:30 PM
Subject: Registration with Lowell Education Online
September 1, 2003
Dear Michael Coucke:
Thank you for registering with Lowell Observatory's online education
site. We hope you enjoy using it and visit regularly as we continue to
expand its features and capabilities. This is a one-time welcoming
email.
For your records, your user ID is xxxxx, and your password is #########.
You'll need to supply these each time you log in.
This site gives you access to research-grade equipment including a 16"
telescope, CCD detector, and image processing software. Our online
archive of data is now available 24/7. The telescope will be opening to
our onsite users in May, and on select nights to the Internet at large
in June.
We have designed this site so you don't need a huge monitor or a
supercomputer to use it. All pages are viewable on screens running at
800x600 resolution or higher. To use LOPARC, you'll need a Java-enabled
browser with the Java 1.4 plug-in installed. If you don't have the
plug-in, you'll be prompted to download it the first time you attempt to
connect. This is an admittedly large (9 MB) but one-time-only download.
This site works correctly under Internet Explorer version 5 or higher.
If you use Netscape, you must be running version 6 or higher, and
display or applet behavior anomalies may occur.
If at any time you can't connect to our server, simply try again later.
We do experience several power outages each year, particularly during
Flagstaff's summer thunderstorm season. Our server is fully protected
and backed up, and can be quickly brought back on line, but any active
user sessions will be lost. Thanks for your patience during these
inevitable downtimes.
Your questions, comments, suggestions, and bug reports about this site
are always welcome. On behalf of the LOPARC development team, thanks
for signing up!
Jeffrey Hall
Assistant Research Scientist
Associate Director, Education and Special Programs
Lowell Observatory
Flagstaff, ArizonaHi Mike,
I see this in your logs:
Java(TM) Plug-in: Version 1.4.2_01
Using JRE version 1.4.2_01 Java HotSpot(TM) Client VM
User home directory = C:\WINDOWS
Proxy Configuration: Manual Configuration
Proxy: http=proxy,https=proxy,ftp=proxy,gopher=proxy
Proxy Overrides:
I just helped my Dad set up his computer with a new
cable modem, and had the situation where we couldn't
access any secure Web sites. The cable folks had us
disable the proxy. It looks like the error message is
saying it can't find your proxy server, and the logs
you posted say that you've decided to configure your
proxy manually, rather than using the settings from
IE (which is how mine is set up in the plugin
control panel.)
Could that be the problem?
--Steve -
I have tried VERY unsuccessfully to install the new iphoto 9.2.3 update.
I have installed it several times both from the appstore and from Apple Support downloads...it says it has 'successfully updated' - then on opening iphoto, a dialogue box pops up and says:
iPhoto cannot be opened because of a problem.
Check with the developer to make sure iPhoto works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
Click Report to see more detailed information and send a report to Apple.
Insane...I have all my updates including Lion 10.7.3 why does APPLE KEEP SENDING BETAS AS A REAL PRODUCT?
Does anyone know how to copy over a backup from a twinned drive Backup? What files etc.
Thanks tons...Thanks Terence,
I did get it working finally...and your last advice was what I needed.
I am embarassed that I was an early adopter...SHOULD HAVE KNOWN BETTER and read the problems before creating some for myself.
This was an excercise in frustration, because of the obtuse division between the appstore and Apple Support downloads... it was a bit of a circuitous route...strange that with all the security reciepts and tracking that Apple goes to to prevent piracy... which Steve by his own admission used to build Apple...
Why aren't the server scripts smart enough to say…”HEY DUMMY you can't use this download because you purchased the last iPhoto upgrade from the appstore...and… DON'T WASTE YOUR TIME and precious data BUDGET downloading this gargantuan file which will eat 20% of your expensive 5Gb monthly data allotment!!!…and NOT WORK…only pretend to…and then foul your system….kill your productivity and turn your hair whiter…even worse than LION did.
I am just so antagonized by the inept scripts in recent installations that don't do a diagnostic before allowing installation that is going to corrupt things...I had less effort and frustration when I ran my ATARI with a MAC emulator...rarely lost any productivity to nonsense.
I AM TIRED OF BETAs dressed as products...designed and rushed out for Apple toys that once were tools of the creative trade...COREL...may still have a chance at a comeback if Apple keeps pumping out toys instead of the venerable tools we once adored as income enhancers. -
Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?
If this happens on monitor 2 of 2, this problem has been solved here:
http://support.mozilla.com/en-US/questions/794823#answer-157988
Go to "Firefox"--> "Options" --> "Advanced"
Then un-check "Use hardware acceleration when available"
While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.) -
Please, I am in a very big problem
I designed the project by Adobe director
And you test the software on the computers on Windows and works with high quality
When I tested the project on Apple Macintosh operating system, Li appeared a number of problems and you dissolve a large part of them
But I have a problem too big
The project works on some devices and others show me messages mistakes and why chasm different operating system version
Apple's Macintosh and these messages
"biosegnatures" can't be opened becouse it 's from undefined developer "
others
shokwave player error
pleas what can i doWelcome to the Support Communities.
m.raslan wrote:
I tested the project on Apple Macintosh operating system
Click on the menu at top left of your screen, choose About This Mac and, in the panel that appears, note the Version no. in the form 10.n.n. Then update your product list so we can see what version of OS X you're running on the Mac — see this tutorial:
Update your product list
m.raslan wrote:
"biosegnatures" can't be opened becouse it 's from undefined developer "
This Apple doc may help:
OS X: About Gatekeeper
m.raslan wrote:
shokwave player error
Is Shockwave Player installed?...
http://www.adobe.com/shockwave/welcome/
...If not, get it here:
http://get.adobe.com/shockwave/ -
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
Problem with new version 4.3.2 apps not working " after update to the new version "
Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards
Maybe you are looking for
-
From a PDF in a browser window - open links within in that PDF in a new window
BACKGROUND SCENARIO: Users view a PDF document within their browser window (default behavior at my organization). Key point is, the PDF isn't being viewed in an Acrobat Reader window, it's being viewed within the browser window. Within that PDF, are
-
Clicking on firefox icon causes blue screen crash
This began Friday, Feb. 25, about mid day. The only changes to the system that morning were an update to an Adobe plugin, either Flash player or Shockwave, I'm not sure, and an update to the Scottrade Elite desktop trading app. Both of those changes
-
ITunes stops downloading due to other windows
iTunes stops importing the minute I open another program and that program's window is on top of iTunes. Any ideas how to prevent this? Thanks in advance. David
-
hi, when i finish an example in creator, when i deploy and run it, in safari and mozilla, all behaviors of buttons or all page runs as i tought, but when i runs the proyect in IE 6 maybe dont work partially or completly, why is that?, my mistake?
-
What will happen to the history and snapshots when images are process changed?
What affect will it have, especially on items where the sliders have changed?