Problem in displaying Arabic Character in Paper Layout

Hi
I am facing problem while displaying arabic characters.
In Web layout i am able to get it by changing the character set to ISO-8259-6.
I had changed the NLS parameters in registry as suggested in the help. But still i am unable to get. Please can anyone send the brief steps to fix this.
Thanks in Advance
Ranganath

Ranganath,
That means subsetting is not happening. If subsetting had been successful, you would have seen in "Font properties", the type of font as Type 3 and name of the font as Fx, where x could be 0,1 etc.
The things I suspect are: 1) your report definition has some other font associated which is not Arial.
2) You are not specifying correctly the subset information in uifont.ali.
Open your report in builder and check again, what font you are using to display the data. Open the report in paper layout and click on the data field and check in the font box, the font name that is displayed.
In your uifont.ali, make sure that under [PDF:Subset] section, you specify (if you are using Arial font)
Arial = "arial.ttf".
If you have any other entry regarding Arial in other sections of uifont.ali, comment those for the time being by putting # before those.
Let me know the font properties after these steps.

Similar Messages

Problem in displaying arabic

Hi
I am having a problem in displaying arabic language. The
problem is that sentences are not being displayed in correct
format. That is they are displaying in the format like left to
right languages and not in the format like right to left languages.
Someone can suggest me what is the real problem and how can i
solve it?
Regards

Hi
Even I had the same problem initially. Have you installed the
arabic fonts in your machines? I assume that you are working on a
Windows machine. My suggestion would be goto {control panel ->
Regional language and Settings -> select "Language" tab ->
select the two checkboxes in that tab}.
It will ask for the windows XP CD to install those fonts.
Once its through I hope your problem will be resolved.

My N79 can't display arabic character

hi guys, can you all help me how to make Arabic character/fonts can be display on my N79 instead of boxes character. I already update the firmware to 30.019.53.1 but still cannot display Arabic fonts.
What should I do? Am I missing something?
can you please help me.....
thanks.....

_Nokia supporting_
He. İ;m sorry arabic crachters not supporting.

Display Arabic Character in NetScape Navigator

Hi
I am using Oracle Forms & Reports 10g R2. I call a report through a button in that report there are English and Arabic Character. When i see report in Netscape Navigator 9 English character show fine but Arabic Character does not showing properly.
If I check this report inside report builder Arabic Character show fine.
I also try by setting 'Character Encoding' = (ARABIC WINDOWS 1256) in NetScape Navigator 9, but no luck.
Please help me how to solve this issue.
Thanks
Yassen.

Check this link
Arabic Fonts Issue in Reports
1. Re: PDF Reports in Unicode / Arabic & English
2. http://www.orafaq.com/forum/t/162197/149761/
3. Re: Arabic Report generated to text file giving Junk Character.
Hope this helps
Hamid

Problem in displaying Arabic text in flash cs3/cs4

Hi All, I'm creating one website. I have to display dynamic xmlize arabic text in flash. I have done it using flash cs3/AS3. But problem is that when text displays in flash it is not rendering as expected. Some gaps comes in the characters. But when I open my xml in browser, arabic text displays correct.
Is there any way to do it in flash cs3 or Flash cs4 using player 9? It would be really great if anyone can give me solution on this. Thanks
Chandrakant

You have to do it yourself - I don't have a ready solution. Just look into documentation how StyleSheets are used and see what properties work best for you:
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/TextField.html
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/StyleSheet.html
Also, with embedded fonts you need to play with TextFormat settings and AntiAliasType
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/AntiAliasType.html
In addition, on my machine even if I don't emebed fonts - Arabic works in Arial, TImes and others.

Displaying Arabic in PDF report generated by Report viewer

Dear all,
we are using oracle developer suite 6i 32 bit on oracle database 10gR2 32 bit on windows server 2008.
we have a problem with displaying Arabic in our pdf file which is generated from the report.
details are below
1. our database NLS details are below
select * from v$nls_parameters
PARAMETER                                          VALUE
NLS_LANGUAGE                                       AMERICAN
NLS_TERRITORY                                      AMERICA
NLS_CURRENCY                                       $
NLS_ISO_CURRENCY                                   AMERICA
NLS_NUMERIC_CHARACTERS                             .,
NLS_CALENDAR                                       GREGORIAN
NLS_DATE_FORMAT                                    DD-MON-RR
NLS_DATE_LANGUAGE                                  AMERICAN
NLS_CHARACTERSET                                   AR8ISO8859P6
NLS_SORT                                           BINARY
NLS_TIME_FORMAT                                    HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT                               DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT                                 HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT                            DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY                                  $
NLS_NCHAR_CHARACTERSET                             AL16UTF16
NLS_COMP                                           BINARY
NLS_LENGTH_SEMANTICS                               BYTE
NLS_NCHAR_CONV_EXCP                                FALSE
2. our registry details are below
NLS_Lang=ARABIC_AMERICA.AR8MSWIN1256
3. our operating system details are below
System Language= Arabic Oman
4. PDF Viewer is Adobe Acrobat Reader
now here is the problem
when we generate the report, the report viewer display the report and the Arabic is displayed as expected.
but when we click on File>Generate to File>PDF
the file is created, but the contents of the file are in unknown format, it is neither English nor Arabic.
if we click on File>Generate to File>RTF
then the Arabic is displayed correctly, but it is not what we need. we need to display it in ADOBE ACROBAT or FOXIT READER for example.
How to fix it?
kindly guide us accordingly.
Regards

any help please?

Cannot display turkish character in publication mhtml output

Hi there,
I have a problem on displaying turkish character on BusinessObjectsXI3.1 publication mhtml output.
I have set a report scheduled and shown result on email body as html and all turkish character turn into a different characters.
Database locale has been set to Turkish. Is there any paramater to set in universe or some whereelse?
I need to figure out this as soon as possible. Could anyone share the experience?
Thanks in advance
Yasemin

Sorry. You should probably open a ticket with SAP.
Is there anything in the Publication Job Server and Adaptive Proc Server logs ?

Display national character

Hello,
I have a problem to display national character in an APEX-Application. In this application email headers are involved. Some headers, espcially subjects contain encoded words ([rfc2047|http://tools.ietf.org/html/rfc2047] ). After decoding using utl_encode.mimeheader_decode(N'encoded words') , the decoded words can't be correctly displayed. I have tried following code:
SELECT utl_encode.mimeheader_decode(n'=?koi8-r?B?58zFwiDhy9XMz9c=?=') FROM dual;
NLS_LANG settings of my database server are:
NLS_LANGUAGE: AMERICAN
NLS_TERRITORY: AMERICA
NLS_CHARACTERSET: WE8MSWIN1252
NLS_NCHAR_CHARACTERSET: AL16UTF16
Because email headers are ASCII, I does not using AL32UTF8 character set as standard one. Installed APEX is release 3.1.
APEX Server at apex.oracle.com can correctly display the decoded words. It takes AL32UTF8 as standard character set. Must my server be migrated from WE8MSWIN1252 to al32UTF8, or there is another way? Could somebody please help me?
Thank in advance
cj. wang

Hi,
The problem seems to be from the jsp compiler. The parser may not be supporting the UTF- 8 encoding. Try to change it to ISO8859_1. Where is your web-apps.xml, I think it should be web.xml. And encoding style you set to the above said. Should you have any further questions please post it to the news group.
Please let me know whether this helped you or not.
Thanks,
Rakesh,
Developer-Support Team, iAS.

Problem displaying Arabic characters in PDF using Java APIs

We are experiencing a problem when attempting to display Arabic characters within a PDF document using the Java APIs.
The relevant Java code is as follows:
RTFProcessor processor = new RTFProcessor("example.rtf" );
processor.setOutput( “example.xsl” );
processor.setExtractXLIFF(true);
processor.process();
ByteArrayOutputStream dataOut = new ByteArrayOutputStream();
DataProcessor dataProcessor = new DataProcessor();
dataProcessor.setDataTemplate( example.xdt" );
if( parameterValues != null && parameterValues.length > 0 )
setReportParameters( dataProcessor, parameterValues ); // method to set any report parameters from the parameterValues list.
dataProcessor.setConnection( jdbcConnection );
dataProcessor.setOutput(dataOut);
dataProcessor.processData();
FOProcessor foProcessor = new FOProcessor();
foProcessor.setLocale( locale );
foProcessor.setData( new ByteArrayInputStream( dataOut.toByteArray() ) );
foProcessor.setTemplate( “example.xsl” );
String xliffFileNameAndPath = getXLIFFFile( “example”, locale );
if( xliffFileNameAndPath != null )
foProcessor.setXLIFF( xliffFileNameAndPath );
foProcessor.setOutput( "example.pdf" );
foProcessor.setOutputFormat(
outputFormat == PDF_FORMAT ? FOProcessor.FORMAT_PDF : FOProcessor.FORMAT_HTML );
foProcessor.generate();
The method getXLIFFFile( ) gets the relevant XLIFF file for the supplied report locale (if it exists) – the three test files that we used were Italian (example_it_IT.xlf), Spanish (example_es_ES.xlf) and Arabic (example_ar_AE.xlf).
I imported the following JAR files from the XML Publisher release (version 5.6.2) into my Java application: collections.jar, i18nAPI_v3.jar, versioninfo.jar, xdocore.jar and xmlparserv2.jar.
The output is OK for all three translations in HTML format, using a charset of UTF-8, and for Italian and Spanish in PDF format. However, the Arabic characters display as question marks in PDF format. The same issue occurs if I stream the output as a byte array straight to the HTTP response rather than save within a file.
Note that the same RTF, XDT and XLIFF files produce the correct output in both HTML and PDF when executed within XMLPublisher.
Thank you

Hi
I had a similar issue with arabic chars. With PDF layout, chars were appearing properly when preveiwd on local m/c, but as I implement file on server, it was displayed as ?????. I had raised a TAR 5798348.993 with oracle about this and they suggested to apply patch 4028294 Oracle Sourcing J Rollup and then patch 4182914. But later my users changed requirement and i cud not apply the patch to test if it works fine.
But here, you have suggested that installing fonts would do. Is it really that simple? If yes, dont know what is that patch for which I was told to apply.
Regards
Varun

Landscape Paper Layout - Won't Display on the Web

I am trying to display a report (paper layout only) on the web using desformat=pdf. To test if the report could be viewed via the web, I created a simple version and could view it in my browser w/ no problem; however, after adding some columns and making some formatting changes, including making the report display as landscape, the report will no longer display in my browser. Instead, the browser window just displays a blank white space w/ the little image icon in the top left corner. (The one that's the little box with the red square, black circle and blue triangle in it.)
Again, this is not a web layout, but the paper layout of the report, and is meant to open up as a pdf. It is also a must that I display this report as landscape rather than portrait.
What can I do to make this report display correctly in the user's browser?

Hi Brice,
I just tested this with a very simple report in landscape (11" x 8.5"). The report appeared correctly in the browser, and I also printed it to confirm it comes out in landscape. I used Reports 10g.
So I think there may be some other problem with your report. For testing, you can leave the report as is (formatting, data etc), but change the page dimensions to portrait, and see if that comes out properly in your browser.
You can also test this - send the landscape report to file (destype=file) instead of displaying it on the browser (destype=cache), and see if the file come out fine.
What is the Report version you are using?
Navneet.

Conditionally Display Paper Layout Section

I have a report, that uses the Main Section, and the Trailer Section. The Main Section displays summary data, and the trailer section displays detail data.
I need to use both sections because the paper size for each section is different - the summary data only needs to print out landscape letter, but the detail data needs to print out landscape legal.
I also have a format trigger so that the user can choose to display or not display either section of the report. The problem I have, however, is that when a user chooses to not display a section, that page still prints out, it just prints out as a blank sheet.
Is there a way to conditionally display an entire section of the paper layout? (Header, Main or Trailer)

You are correct using the trigger to suppress the section content. To get rid of blank pages, add BLANKPAGES=NO to the report call string.

Paper Layout displayed instead of Web Layout

Hello All,
I've developed a report in Reports 10g and saved it as a jsp file, having both paper & web layout. I've also designed a form in Oracle forms 10g with a list item displaying the list of all reports available. I've written the following piece of code to run the report selected.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(200);
rep_status VARCHAR2(20);
rep_location varchar2(100);
pl_id paramlist;
d date;
DF VARCHAR2(10);
BEGIN
     IF(:rbg=1) then
          df:='pdf';
     else
          df:='htmlcss';
          end if;
repid := find_report_object(:REPORT_LIST);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,df);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_devserver');
     IF(:report_list NOT IN ('APTC_ANNUAL_RPT')) THEN
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=YES P_USER_CONNECT=ADMIN/PINNET@PINNET                         P_SERVER_NAME=rep_devserver P_ACTION=http://pin-150:7778/reports/rwservlet?');
     v_rep := RUN_REPORT_OBJECT(repid);
     ELSE
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=NO P_USER_CONNECT=ADMIN/PINNET@PINNET                         P_SERVER_NAME=rep_devserver P_ACTION=http://pin-150:7778/reports/rwservlet?');
          v_rep := RUN_REPORT_OBJECT(repid);
     END IF;
     rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
     LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
     WEB.SHOW_DOCUMENT('http://pin-150:7778/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=rep_devserver','_blank');
ELSE
message('Error when running report');
END IF;
END;
Now after this piece of code gets executed I get to see a JSP report in Paper Layout format. But I want the Web Layout to be displayed. Can anyone please tell me what I've to do to get the desired output in Web Layout.
Reagards,
Arun.V

Hello Francois,
Thanks for the reply. As per my code "df" actually is a variale which stands for the format of the output, which is determined by the users selection(in this case a radio group) in the form. DF stands for either "pdf" or "htmlcss".
The following is the code I've used to determine the users preference which can be found within my original posting.
DECLARE
df varchar2(10);
BEGIN
IF(:rbg=1) then
df:='pdf';
ELSE
df:='htmlcss';
END IF;
END;
Kindly point out to me if there are any errors in the way I've written this code.
Thanks & Regards,
Arun.V

Problem with the paper layout!!!

I have a repeating frame in my report which it brings me back several records order by seven fields. I have a problem in the paper layout. I wondering if it's possible to change the view of my paper layout and if some of the order's by four first field would change then the next records would print in the next physical page.

Hi Toby,
Thank you for your help. Well, at the following you can see the 3rd line of my code and at the last line I
try to specify the charset. I have checked that ISO-8859-7 is ok for greek fonts but unfortunately it still doesn't work...
Maria.
<%@ taglib uri="/WEB-INF/lib/reports_tld.jar" prefix="rw" %>
<%@ page language="java" import="java.io.*" errorPage="/rwerror.jsp" session="false" %>
<%@ page contentType="application/vnd.ms-excel" %>
<rw:report id="report">
<rw:objects id="objects">
</rw:objects>
<html xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:x="urn:schemas-microsoft-com:office:excel"
xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-7">
..........

Tool -- copy display arabic letter as junk character

Dear All.
Our env 12.1.3 on Solaris 5.10 this is fresh installation.
We are running some finance report, Its completing normally as well output files display character properly ie in english and arabic.
While opening log file from tool --> copy option Arabic character showing as junk character.Below are the detail of our nls characterset.
SQL> SELECT * from NLS_DATABASE_PARAMETERS;
PARAMETER VALUE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AR8ISO8859P6
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
PARAMETER VALUE
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_RDBMS_VERSION 11.1.0.7.0
20 rows selected.
Please let us know is there any work around to over come this issue.
With Regards
T.K

We are running some finance report, Its completing normally as well output files display character properly ie in english and arabic.What if you download the log file from the server and open it from the client, would you be able to view Arabic font correctly?
While opening log file from tool --> copy option Arabic character showing as junk character.Below are the detail of our nls characterset.This looks like a browser issue. What is your browser? Can you view Arabic correctly from your browser (View > Encoding)?
Thanks,
Hussein

How to dislay other language font in Report Builder paper layout?

How to I display other language font (e.g. chinese) in Report Builder paper layout?
I have no problem displaying Chinese characters in web layout.

If your NLS_LANG is properly set to chinese character set and if you are choosing the right chinese fonts, in Reports builder, your report paper layout should display chinese characters properly.
If you are generating to PDF, then you might want to use PDF subsetting to display the chinese characters properly.
See the documentation on how to use PDF subsetting.

Problem in displaying Arabic Character in Paper Layout

Similar Messages

Maybe you are looking for