Problem in File Channel

Hi,
I have a scenario whice is split in two parts (to be precise two saperate scenarios execute).
In the first one file is received from a SOAP channel as attachment, and through a receiver file channel it is sent to a local folder in XI.
In the second Interface, a File channel picks that files and througha SOAP channel sends it to the third party.
Now the issue is,
In the first interface the size of the file received and size of the file sent to XI folder is same, means no truncation is there.
But when the File is picked by the file channel in second interface, the file gets trucated and it only picks a part of the file.
Other interfaces are dealing fine with any file size, but only this particular interface is truncating data.
Any help on this will be appreciated,
Thanks,
Vikas

Hi Vikas,
I dont know why you designed interface like 2 flow,you can avoid one interface as per question
SOAP---->SAP PI----->File
File-->SAPPI---->Receiver.current flow,
you can make it SAOP--->pi--->Receiver,but i dont know why you developed as two flows..coming to truncation problem i dont think problem with communication channel,my advice to you check in Moni Outbound payload,if it is taking whole message then the problem with Maping,some where you done wrong.
else
first open the content of the file in wordpad and see,and check communication details.
Regards,
Raj

Similar Messages

Performance problems with File Adapter and XI freeze

Hi NetWeaver XI geeks,
We are deploying a XI based product and encounter some huge performance problems. Here after the scenario and the issues:
- NetWeaver XI 2004
- SAP 4.6c
- Outbound Channel
- No mapping used and only the iDocs Adapter is involved in the pipeline processing
- File Adapter
- message file size < 2Ko
We have zeroed down the problem to Idoc adapters performance.
We are using a file channel and every 15 seconds a file in a valid Idoc format is placed in a folder, Idoc adapter picks up the file from this folder and sends it to the SAP R/3 instance.
For few minutes (approx 5 mins) it works (the CPU usage is less then 20% even if processing time seems huge : <b>5sec/msg</b>) but after this time the application gets blocked and the CPU gets overloaded at 100% (2 processes disp_worker.exe at 50% each).
If we inject several files in the source folder at the same time or if we decrease the time gap (from 15 seconds to 10 seconds) between creation of 2 Idoc files , the process blocks after posting 2-3 docs to SAP R/3.
Could you point us some reasons that could provoke that behavior?
Basically looking for some help in improving performance of the Idoc adapter.
Thanks in advance for your help and regards,
Adalbert

Hi Bhavesh,
Thanks for your suggestions. We will test...
We wonder if the hardware is not the problem of this extremely poor performance.
Our XI server is:
     Windows 2003 Server
     Processors: 2x3GHZ
     RAM: 4GB (the memory do not soak)
The messages are well formed iDocs = single line INVOICES.
Some posts are talking 2000 messages processed in some seconds... whereas we got 5 sec per message.
Tnanks for your help.
Adalbert

Problem in file content conversion from XML to CSV

Hi Experts,
I am finding problem in file content conversion. I need to convert the following XML file into CSV file:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_CROSS_REF xmlns:ns0="urn:dabur:idoc2file:pos">
      <Update_type>2</Update_type>
      <PLU>00000000</PLU>
      <Cross_ref_PLU>7777777</Cross_ref_PLU>
      <Capture_PLU />
      <Package_size />
      <Package_desc />
</ns0:MT_CROSS_REF>
The output file data has to be like:
2,00000000,7777777,,,,
The problem I am facing is while specifying the content conversion parameters in communication channel i dont know what recordset structure i should mention as all the records are directly under root. If I mention recordset structure as "ns0:MT_CROSS_REF" and parameters as
ns0:MT_CROSS_REF.fieldSeparator   ,
ns0:MT_CROSS_REF.endSeparator    'nl'
i get error in communication channel monitoring and no file is posted.
Please help me as to what correct parameter i should mention in my case.
Thanks,
Regards,
Yash

Hi Chirag,
I cannot change the xml file as it comes after mapping idoc to a message type. How can I add ROOT in the xml? My message type is like MT_CROSS_REF and it has those 6 fields as in the XML (Update_type, PLU etc.). I do the mapping of these fields from a IDOC and get the XML.
I hope you got my point.
Thanks,
Yash

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Receiver file channel with ANSI format.

Hi,
I have developed file to file scenario for which sender file format is unicode and receiver file format is ANSI.
There is no FCC at sender and receiver site. In interface we are just bypassing the file in PI, there is no ESR objects.
I have configured sender channel for unicode in following way:
File Type : Text
file encoding : UTF-8
I have configured receiver file channel for ANSI in following way:
File Type : Text
file encoding : i have tried with cp1252 and ISO8859-1
When I run the interface I received receiver file in ANSI format. But when I open that file in notepad the content in the file is having spaces in between 2 characters like below.
V O L 1 0 0 0 0 0 9
Is any bady having idea about this problem?
Thanks.
Edited by: darshana-PI on Jan 23, 2012 6:32 PM

Hi,
The blanks in your target file might be created because your source file is encoded with UTF-16, not UTF-8. Try using one of these as an encoding in sender communication channel:
UTF-16BE (16-bit Unicode character format, big-endian byte order)
UTF-16LE (16-bit Unicode character format, little-endian byte order)
UTF-16 (16-bit Unicode character format, byte order)
Hope you'll find this useful,
Greg

Error in Receiver File Channel...in MTB module (Urgent)

Hi,
I am working on a Proxy to File scenario. I am using Message Transformation Bean in receiver file channel to convert xml file into fixed length file. I am getting an error : Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: java.lang.Exception: Exception in XML Parser (format problem?):java.lang.NullPointerException'; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):java.lang.NullPointerException
in MTB step of audit log for comm channel.
Please help me resolve this.
Thanks,
Jaya

Hi ,
"Transform: failed to execute the transformation:"
Pls check ur data what u have to send .. any missing information or any special Chacters or any extra fields are available in the data, this type of transformation error raised.
check once again ur mapping transformation and test the mapping in INTEGRATION REPOISTERY with the same data(what u have to send Previously).
and also check ur adapter status in RWB.
Regards,
Sateesh N.
Edited by: Sateesh N on Apr 21, 2008 1:53 PM

Sender File channel in "To be Delivered" status always- PI 7.4- ICO interface

Hello All,
We are testing one Integrated Configuration Object (ICO) which is developed on PI 7.4 system (dual stack). Scenario is simple file to file and it doesnt have any ESR part (pass thru interface).
Sender channel (File adapter NFS based) is picking the file from IN directory and after which it is always in "To be Delivered" status and it never passed to Receiver file channel (NFS based).
We tried stop and starting the channel, deleted and recreated the channel, reactivated the channel, cancelled and restar the message from Message monitoring page, Cache refresh from ID and CPA cache refresh which didn't help us.
Below is audit log of sender File channnel:
Please help us in solving this problem.
Thanks,

Hi Naresh,
Have you tried Eng Swee Yeoh advices in this blog Handling and preventing messages stuck in To Be Delivered status?, like to set timeout and the mode Per file transfer.
Regards

FCC file channel cannot process the empty file

Hi,
My requirement is like that a msg mapping getting two files from different sources and combining into one file and send to the receiver. There is a possibility that any one of the file can be empty.. now problem is how to process the empty file in FCC file channel. When we trying to process the msg we are getting the error msg like "file end of exception". we already check the option empty file in file comm channel....under processing tab. But no use.Though we achieved through a module in sender channel. i want to know how to achieve this through simple content conversion by the FCC channel.
In Content conversion. Record----> item,.. here what is mean ''? 0 to outbound or 1 to outbound?
Regards
Balaji

Hi Balaji,
here what is mean ''? 0 to outbound or 1 to outbound*
means 0 to unbounded.
Let me remind u ... the requirement cannot be achived in this way.. if file is empty.
I hope u already checked the option..
process empty files.
I think u can handle this by, using a adapter module, in which..
if file size(ASMA) is zero.. create a empty message and send it
to the PI.
Babu
Edited by: hlbabu123 on Mar 9, 2010 2:36 PM

Problem using File sharing in a small office network

I have a problem using File sharing on an Imac and Macbook Pro.
My office has a small network running Windows Small office file server 2003. I have one Windows 2000 PC connected to it and 3 Macs, an 2.4 gHz Intel iMac running Leopard 10.5.6 , a MBP running the same and a Mac Mini running 10.5.
From the Finder Shared window of the Mac Mini, I can see all the computers on the network. It also used to be the case for the iMac, but the MBP could never see the Windows PC’s, not the server or the Win2000. This wasn’t a big problem as I was communicating between the Macs and using the shared printer on the iMac.
On Monday Jan 19 the iMac was suddenly unavailable to the other 2 Macs. It was working normally on the Friday. The iMac can access the Mac Mini and copy files to it. The Mac Mini can see the iMac but cannot access it. Even trying to connect as, ends in a failed connection. I have tried rebooting, turning File sharing off and then on again to no avail.
The iMac now also cannot see the Windows PC’s which it previously could.
To get files from the MBP for printing, I now copy it to the Mac Mini and acces the folder from the iMac, a very tedious procedure. I don’t know why this happened and am scared that the Mac Mini is going to do the same thing.
All three computers are also running VMware 2.0 with Windows XP pro, and from VMware the server is visible on all the computers.
Any help will be much appreciated, I live in a small town in South Africa and the local computer suppliers have no knowledge of the Macs.
I think that the problem with the iMac may have started after a software upgrade to 10.5.6 but I am not entirely sure.
Thank you
ajdk

Well, you're current method sounds pretty good. But if you want to user a file server, hey go ahead.
What you want to do when you centralize project files is to keep track of which one is the newest and becareful not to overwrite files with the same name. So you either have to set up individual spaces on the server (separate AFP/FTP folders maybe), or you'll need to run a file checkout service.
The individual space is cheaper, but it's not much of a difference from backing up to the network drive. Since you have Gigabit connections, you might even opt to save ALL the user files on the server instead of just the project files.
If you want to run a file checkout service, there's two approaches. You can run a service that can host any kind of file, or you can run a version control system for each kind of application (Photoshop, Word, etc.). Please notice, that as you read further and further along, the methods become more and more expensive and complicated. Once you get to this point, it will be necessary to purchase or build software in addition to the Mac OS X Server package.

Problems with File Transfers Over Firewire 800

Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)

Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

I have problems transferring files from PC to Mac and from Mac to Mac

I have problems transferring files from PC to Mac, and from Mac to Mac. PC to PC is fine. Nothing but problems with the Mac. One example:
While working on my PC, I open shared folders on an external HDD connected to the Mac. I click on paste to move the files. I get an error after a few seconds to a minute of trying to move several files from my PC Win 7 to Mac OS Maverick, that there is a file already at the destination on Mac. This statement is true, but it was just put there because I am copying them over in that same action. It reads 0Kb and wasn't there before I started. Then I get an error: The Action Cannot be completed because the folder is open in another program. Close the folder or file and try again..
Whether I click on it a bunch right of way or wait, it still takes about 45 seconds. I have to do it with every file and it only happens when copying from a PC to Mac. I have even restarted both computers so nothing is using any files. If I copy one file at a time, I don't get any error.
So I have one file to move, no problem. If move 5 files, The first will go fine, but it shows all 5 files in folder at once. All other files than the first show 0kb. I get the file already existing error once it starts the second file transfer, and I select move and replace. Then I get The Action Cannot be completed because the folder is open in another program. I wait or click repeatedly until it starts to move file. That file will then show something other than 0kb. When it is done, the error process starts all over. I tried checking the PC with unlocker, but the files do not show themselves locked on the PC.

Its not only French. Even certain characters in English will come across as gobblydegook from 1 platform to another. I see this in emails that likely were composed in Word & the characters don't come across.
Not sure if this is still true, but years ago someone explained that there is a standard character set & then I think its extended characters & those vary from platform to platform or language to language, etc.

Unable to download from AppStore, updates,etc.Messages 'the installer is damaged' to 'there might be a problem with file ownership and permissions.' I am the owner and only user of a new MBP. What could be going on?

Is anyone having the same type of problems I'm having with Lion. I have a new MacBook Pro, received 7 weeks ago, preinstalled with Leopard 10.6.7. I didn't migrate anything from my old iMac, wanted a clean install from the Apple Store. While there, I asked for the upgrade to Lion 10.7, however their system was down.
I installed it myself, wirelessly about a week later, and Apple emailed me a receipt. Now, I've had to call support directly last week when I lost Mail, Address Book, was unable to open Preview or iTunes, among other problems. Seemed fixed after a session that baffled even the store tech. Now I am unable to download or install the recent Mac updates for Lion, from the App Store, could not install Adobe Reader, etc. Messages range from 'A network error has occured - Check your Internet connection and try again' to 'The Installer is damaged and cannot open the package. There may be a problem with file ownership or permissions.' All fail and I'll probably have to call Apple again. I am frustrated beyond words. Logs 'Install's runner tool is not properly configured as a setuid tool', domain errors, 'attempt to write a readonly database, and on and on. I have barely done a thing on this computer except search online for help with these problems. Safari gives me a 'You are not connected to the internet' too often. Diagnostics disagrees. I do see wi-fi problems in the forum. Disk and permissions were fine at the beginning of the earlier problems, checked first by support tech. I'm not sure if support tech even knew. I was just happy they were fixed. Anyone have these download and/or install problems after a 'clean bill of health' so to speak, only a week ago?

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

Which computer? Which Windows?
What are you trying to do?
-Jerry

Problem in File Channel

Similar Messages

Maybe you are looking for