Problem in Formatting using Mac OS X Snow Leopard DVD (FULL)
Hi all
I've just bought a Mac OS X Snow Leopard DVD -Full- (not upgrade)
When I boot from the installation DVD nd then
after few minutes the screen turns to black nd I can't do anything!! (MacBook Pro 2009)
I tried using my iMac nd the installation DVD works smooth nd fine!
I don't know why MBP is not processing the installation steps nd the screen suddenly turns to black!
Waiting ...
Thanks
Make sure your MacBook pro is not too new for the disk in question.
Find the serial number for the MacBook Pro, and look at the three characters labelled ABC below, and tell us the numbers they are represented by:
xxABCxxxx
Don't give us the full serial number. The x can be any letter or number.
Then tell us the 10.6 version labelled in fine print on the DVD.
That will tell us if the Mac is too new for your Snow Leopard Disc, and you need to use the original MacBook Pro discs that came with your Mac to install 10.6.
Message was edited by: a brody
Similar Messages
-
I have a question? I update my macbook pro but every time I do and I go back to where it says software update it says that if I want to update my pro I just did, and Im using Mac Os X snow leopard is it that I have to upgrade to lion?
It also says view updates, so select that option and see what it wants to update.
-
Direct Upgrade from 10.4.11 to 10.6 Using Mac OS X Snow Leopard Upgrade
Can I upgrade my MacBook (Intel Core 2 Duo) directly from Mac OS X 10.4.11 (Tiger) to 10.6 (Snow Leopard) using the retail upgrade version of Mac OS X Snow Leopard?
Apple's site says you need to install Leopard first, then upgrade to Snow Leopard.
Cheers, Tom -
HT3910 Restore old Mac using Mac OS X Snow Leopard Install DVD
When I try to restore my old Mac, which I am preparing to sell, using the Mac OS X Snow Leopard Install DVD (OS X 10.6.8), I hear the optical disc drive spin up and down, then the disc is ejected. This is the same thing that happens with its original OS X Install DVD, which was OS X 10.4.9.
When I try to restore my old Mac, which I am preparing to sell, using the Mac OS X Snow Leopard Install DVD (OS X 10.6.8), I hear the optical disc drive spin up and down, then the disc is ejected. This is the same thing that happens with its original OS X Install DVD, which was OS X 10.4.9.
-
TA48312 I have problems to downlowd th Mac os x snow leopard.
If someone can help me with tips to correct mi Mac book pro, I have the Mac Os X. The problem is that I can download the Mac Os X Lopard, Neither I can download the Lion! Pleas somebody help me!
You can not download Snow Leopard. You will need to purchase the retail DVD. Check the site below for specs, requirements and price.
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA -
Format/Reinstall Mountain Lion with Snow Leopard DVD
I began having problems with software freezing up this morning out of nowhere and decided to do a disk verify on the Macintosh HD partition using Disk Utility. Once it completed it stated I needed to restart holding CMD+R to enter Disk Utility outside of OSX (I guess) to repair some problems that showed up. After doing that, I recieved a message stating that it could not repair the disk, to backup as much as possible, reformat, and reinstall OSX.
I have been using time machine to back up that partition since the beginning. Backups should not be a problem.
So here are my questions:
#1 - Do I only need to select the "Macintosh HD" partition in disk utility and hit reformat?
Will it even allow me to do that within OSX?
And will it guide me through the process to reinstall OSX?
#2 - When I purchased the iMac it came with Snow Leopard, but have since upgraded to Lion, then Mountain Lion.
If I reinstall using the DVD that came with the iMac, will I lose Mountain Lion?
Or is that attached to my user ID or my Time Machine when I restore?
#3 - I use iTunes - A LOT - Am I going to lose the iTunes database (all my plays, dates, ratings etc...) after reinstalling or will those be safe on my restore from my Time Machine?
I have googled reformatting iMac and read several guides but all this "GUID" stuff is above my head. I just want a clean system like it was when I got it. I use external drives for most of my main storage other than itunes music, which is backed up but remains on the internal drive.
Thank you so much for any help you may be able to give me ahead of time!#1 should allow that.
#2, no need to reinstall 10.6...
http://support.apple.com/kb/HT4718
Or restore from the TM backup once the Drive is fixed.
#3, If the TM backup is good you should be fine. -
HT1338 wont read mac os x snow leopard dvd
I ordered snow leopard for my Mac and it wont read it
No I did'nt pay close attention to your ID line (DUH) power pc will not support leopard, which means it won't support SL.
Leopard, and abbove is intel only.
Sorry -
Mac mini and Snow leopard wireless problems
Hi,
I got mac mini running snow leopard to our office from another branch, this is recently brought mac mini with snow leopard installed,
But the problem is I cannot connect to internet using wireless connections. Reading other posts i found out that there is a snow leopard issues with connecting to wireless network, but this problem seems to unique. When i connect to wireless network it shows me that, mac mini is connected to wireless network but doesn't take ip address from dhcp , its show some self assigned ip which is 169.254.226.163, but my network address are 192.168.1.*, ethernet works fines,but in wireless even when i gave manual ip , it connect but i cannot connect to internet neither i can ping to router.
I tried various methods suggests in forms, like deleting network preference files in /Library/Preferences and ~/Library/Preferences and also deleting network connection and adding new one, even updating to 10.6.3 but nothing works for me,
My macbook nicely connected to wireless and get ip, even PC connect nicely this issue is only with Mac mini
Could have suggest me how can i fixed this, Thank you very much,
Best Regards,
Waruna.
Message was edited by: warunacdsThanks DaddyPaycheck for your initial response. Before I jump onto the phone with Comcast couple of questions that I have for clarification purposes:
1) Are you implying that I must link my blabla.com address to that static IP address through my Domain Provider? See following example:
Record Type Record Host Record Answer TTL
A *.blablat.com >>Static IP<< 300
2) The current IP I have been given 60.172.151.254, why is that not static or how do you know it is not static?
3) When executing the command host in terminal for this IP address it returns the following: c-60-172-151-254.hsdl.co.comcast.net which coincidentally is the same as primary DNS it recommended during the initial configuration of the Mini Server. What does this mean? When I enter this in Safari it results in 'Safari can't connect to server'.
4) Executing the same command for my domain name 'blabla.com' it results in my 'internal' IP address '1.0.10.9'.
Thanks in advance for any clarification you can provide,
Tiest. -
I just upgraded to Mac OS X Snow Leopard version 10.6.3 and now my iCal 3.0.8 won't open at all. What version do I need to or should I upgrade to and where do I find it?
The version installed with Snow Leopard since iCal is part of OS X. If you are trying to use iCal from a different drive and version of OS X, then it won't work. If the installed version of iCal in Snow Leopard is the wrong version, then there was a problem. Delete the wrong version then reinstall Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8
What kind of CD are you burning (Audio or MP3)?
If you're burning an MP3 CD, the songs must already
be in mp3 format.
If not, iTunes will tell you that you have no songs
in the playlist.
M
I was making an audio cd. But I have since found out what the problem was. The files in my PLAYLIST I converted to aiff, since they were SDll files (I thought they were similar to AIFF, and they PLAY on Itunes...just won't burn.) When I selected the songs in the playlist and converted them...I thought all those files were converted, They were not. The converted files went into my LIBRARY, even tho I selected the ones in the playlist...and once I exchanged the SDll versions of the songs in my playlist. THEN they burned fine...but still...it's confusing..you say convert..it says it's been converted..and what they don't say is it's not been converted inside the playlist...where I had selected the songs...It just ADDED aiff versions..but only in the library...Anyway, that's what happened. But it's strange that it PLAYS SDll but won't burn them....and you'd think, logically..the ones you selected would change...but they don't. Playlists are mainly pointers to the actual files I guess...a sort of Alias..
At least it works now. But it's sad that the latest itunes does more, but also does LESS...as I used to be able to burn SDll files. Now I'll have to convert all my files to AIFF, and mp3's as I assume my ipod video won't play anything but mp3's? -
my macbook pro 15 is down. want to know how to burn a mac os x snow leopard 7GB on 4.7dvd using windows
A Mac OS 10.6 retail DVD can be obtained for only $20. Of course that depends on where you live, but if available to you, it is a reasonable price, and will solve your current problem.
Some details about acquiring the DVD at this link,
https://discussions.apple.com/thread/4368218?tstart=0 -
can I use the osx disks from my old mac mini to upgrade my macbook pro so i can then get a further free upgrade
You can not use a DVD that shipped with one Mac to load on to another. To upgrade to Snow Leopard you will need to purchase the Snow Leopard DVD.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
ThanksActually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks -
i have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!
System Preferences > Network > Ethernet? If that shows "not connected" that is all your Mac knows. As far as it is concerned there is no cable connected to the port on your Mac, or the other end of the cable is either disconnected or connected to something that is broken.
Try another cable. If the cable is broken you will also get that status message. If you have exhausted all of these possibilities, the only remaining cause is an inoperative port on your Mac. -
"Use system proxy settings" Not working on Mac OS X Snow Leopard
When I change the network location or when I select "Use system proxy settings" on the connetion configuration dialog.
Firefox is not using the proxy defined on the loction set on Mac OS X Snow Leopard.
I usualy change from work to home, at work I've a proxy and at home I don't, and it's a bit annoying to have to change the proxy twice a day. So I tryed this feature, but It's not working for me.
I've tryed also with Firefox 3.6 (I think) and didn't work either.I run it from eclipse, and on debug mode i checked the value of
java.library.path, and it was ok.
Any way, how can i do what you suggested on mac?It's just a command line argument, but there's no reason to add it if your
java.library.path is ok. One of its componenents must be a directory where
your shared lib is stored, that's all. BTW, the Mac is unix based isn't it?
Shouldn't it be an .so file then? (just a wild guess)
kind regards,
Jos
Maybe you are looking for
-
How do I find & replace a single character?
Am using Adobe Acrobat Pro.... The find/replace box pull down has "Whole Words Only" checked and I cannot uncheck it. How can I find and replace a single character throughout a document?
-
Camera won't work, sending for repairs
I bought an Xperia Z2 from a friend. The phone is nice and everything was working fine, until one day the camera stopped working. Whenever I open a camera app, even any flashlight app, it either says, "Unfortuantely, the camera has stopped" or "Can't
-
Starts up but ORA-205 cannot mount database
I dont seem to understand. I run windows 98 and installed oracle 8i Personal Edition. First,I cannot get scott and tiger to log me Senond, going in as Database Administrator to start database, it starts but does not mount - 'ORA-205, CANNOT MOUNT DAT
-
I bought my daughter a new ipod touch, have connected to itunes as we have all our other apple products but she has been receiving my text messages and emails. So I restored back to factory settings to start again but this time adding her email addr
-
Granular and high level guides to OWCS personalization required
I've searched for a guide but can't find one (I sure there must be one somewhere). My company is new to Webcenter Sites and we haven't deployed everything yet. My developers suggest that Webcenter sites doesn't handle personalization very well but I