Problem in getting registered on metalink.......

plzzz tell me that how can I get registered on metalink while I dont know that from where I should get a Support Identifier and my country(Pakistan) isn't included in the countries list on the 1step page of registration at metalink??? thanx.

Hi,
I just tried this, and it works for me. Just to be sure, you are dragging the "image" from the basic pallete and then assigning the icon property along with tooltip

Similar Messages

  • CCMS agent not getting registered

    Hello,
    No activities carried out on Solman 7.1 & managed system CRM 7
    As I was getting error in RZ21 of solman for agent of our CRM7 system while testing connection,I was trying to re-register sapccm4x agent on managed system CRM 7
    So first I stopped the current sapccm4x agent on CRM7 & de-registered it & re-registered which solved one problem of "hostname unknown"
    But instead started giving new error shown below :
    ERROR: can't register at SOLMAN. RfcRc = 2, AUTHORITY_NOT_AVAILABLE
    RFC Error Info for SALF_CSM_AGENT_REGISTER
    message: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
    status:  EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
    CSMREG user in SOLMAN 000 has this role SAP_BC_CSMREG assigned & it works fine for all other managed systems.
    Kindly request your help  to solve this problem & sapccm4x agent registered.
    Thanks
    Shradha

    Hi Shradha,
    1. what is the version of ccms agent.
    2. what is the SAP_BASIS component level and patch level.
    3. add   SALF_CSM_AGENT_REGISTER   into SAP role   SAP_BC_CSMREG
    With Regards
    Ashutosh Chaturvedi

  • USB Mouse clicks get registered twice, sometimes

    Hello all
    I am using Arch Linux on my Thinkpad T61, and I usually have a USB mouse hooked up to it (Logitech Nano).
    A while ago I started to do some tweaks in order to enable the Synaptics TouchPad and get proper scrolling behaviour on the TrackPoint. However, I must have done something, because ever since, many of my USB mouse clicks get registered as a double click (not always, but often).
    I started doing some troubleshooting today, by commenting out parts of my xorg.conf file (I use evdev hotplugging, but I tought maybe Xorg was registering my mouse aswell) and I even booted up without an xorg.conf once, to no avail. The problem definately does not lie there.
    The only policy file I have that has anything to do with a mouse is /etc/hal/fdi/policy/mouse-wheel.fdi.
    [[email protected] ~]$ cat /etc/hal/fdi/policy/mouse-wheel.fdi
    <match key="info.product" string="TPPS/2 IBM TrackPoint">
    <merge key="input.x11_options.EmulateWheel" type="string">true</merge>
    <merge key="input.x11_options.EmulateWheelButton" type="string">2</merge>
    <merge key="input.x11_options.YAxisMapping" type="string">4 5</merge>
    <merge key="input.x11_options.XAxisMapping" type="string">6 7</merge>
    <merge key="input.x11_options.Emulate3Buttons" type="string">true</merge>
    <merge key="input.x11_options.EmulateWheelTimeout" type="string">200</merge>
    </match>
    Also, I found multiple entries for my mouse in /proc/bus/input/devices:
    [[email protected] ~]$ egrep "Name|Handlers" /proc/bus/input/devices
    N: Name="Macintosh mouse button emulation"
    H: Handlers=mouse0 event0
    N: Name="AT Translated Set 2 keyboard"
    H: Handlers=kbd event1
    N: Name="ThinkPad Extra Buttons"
    H: Handlers=kbd event2
    N: Name="Power Button (FF)"
    H: Handlers=kbd event3
    N: Name="Lid Switch"
    H: Handlers=event4
    N: Name="Sleep Button (CM)"
    H: Handlers=kbd event5
    N: Name="Video Bus"
    H: Handlers=kbd event6
    N: Name="PC Speaker"
    H: Handlers=kbd event7
    N: Name="SynPS/2 Synaptics TouchPad"
    H: Handlers=mouse1 event8
    N: Name="Logitech USB Receiver"
    H: Handlers=mouse2 event9
    N: Name="Logitech USB Receiver"
    H: Handlers=kbd event10
    N: Name="TPPS/2 IBM TrackPoint"
    H: Handlers=mouse3 event11
    N: Name="ThinkPad HDAPS joystick emulation"
    H: Handlers=event12 js0
    N: Name="ThinkPad HDAPS accelerometer data"
    H: Handlers=event13 js1
    Could someone please help me solve this problem, for I have no more ideas how to go at this... Thanks
    Last edited by robrene (2009-06-05 09:47:18)

    It seems there are multiple entries for my USB mouse in /var/log/Xorg.0.log!
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event9"
    (II) Logitech USB Receiver: Found 16 mouse buttons
    (II) Logitech USB Receiver: Found x and y relative axes
    (II) Logitech USB Receiver: Found scroll wheel(s)
    (II) Logitech USB Receiver: Configuring as mouse
    (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
    (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech USB Receiver: (accel) filter chain progression: 2.00
    (**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech USB Receiver: (accel) set acceleration profile 0
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event10"
    (II) Logitech USB Receiver: Found 1 mouse buttons
    (II) Logitech USB Receiver: Found scroll wheel(s)
    (II) Logitech USB Receiver: Found keys
    (II) Logitech USB Receiver: Configuring as keyboard
    (II) Logitech USB Receiver: Adding scrollwheel support
    (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    This looks pretty bad to me... The USB reciever is listed once as a mouse and once as a keyboard. Something went very awry here. This is the output after a fresh boot without xf86-input-mouse installed. The only remaining input drivers I have left from xf86 are:
    [[email protected] ~]$ pacman -Q xf86-input-
    xf86-input-evdev xf86-input-keyboard xf86-input-synaptics
    edit
    I removed xf86-input-keyboard as well now, still no change...
    edit2
    Aha! After some Googling and hooking up the mouse on a Windows XP machine, I noticed that this is a problem with this specific mouse. Under Windows XP, I get the same behaviour (often a double click, sometimes no click at all). It seems it is time to find the warranty papers for this baby. In case anyone ever reads this, this happened to me on a Logitech VX Nano, after about 5-10months of usage (I don't recall when I bought it exactly).
    Last edited by robrene (2009-06-05 15:14:23)

  • Can I register to Metalink for personal use.

    Hi All
    I need to install Dev. suite 10g R2 Patch, but i don't have access to Metalink.
    Can I register to Metalink for personal use? If not how to get System Identifier?
    Prompt answer will be really appreciated.
    with regards,
    MOHAMMED AJAZ.

    Can I register to Metalink for personal use? If not how to get System Identifier?
    hi
    u cant get into metalink as a free u have to buy account.
    sarah

  • Workstations get registered multiple times

    Right now I'm working on ZLM7.2 and I'm running into a problem where workstations get registered each time the workstations are re-installed. I use an AutoYast preboot bundle for this which installs SLED10 in this case. The workstations add the guid to the new object.
    Ex.
    ws1
    ws1-xxxxxxxxxxxxxxxxxx
    ws1-yyyyyyyyyyyyyyyy
    ws1-zzzzzzzzzzzzzzzzzz
    What it really should do is update the existing object.
    Anyone?
    Kind regards,
    Robin Meeuwsen

    Robin,
    in case you do a autoyast installation, this is how it works.
    The device registration is working based on a device id that is generated at the device the first time zmd is started. You will find that file in /etc/zmd/deviceid. As SLED 10 has a zmd package in the distribution, the deviceid will be generated the first time the system starts up. In case you update to the zlm client afterwards, that deviceid file will be kept for the new client. Once you register the system against the zlm client it will recognize that there is already a device with the same name (not the same deviceid) and it will create another one with the device id as extension of the name.
    Are you running the autoyast installations just for a test or is this a common task in your company ?
    Rainer

  • Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it acr

    Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
    Thank you, and sorry for the language.
    Vitas Dijokas
    I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me:  “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
    It is ******* outrageous, and you should know that,  guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone)  authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
    Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
    Vitas Dijokas

    Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
    So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
    If someone knows how to fix this and make firefox launch normally, please reply! Thank you

  • I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

    I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
    ******A true apple fan********

    Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
    Bebers5

  • Problem in getting the database connection from a connection pool

    Hai All,
    I am facing a problem in getting the database connection from a connection pool created on weblogic server 8.1.
    I am using the Oracle database 8.1.7.
    I have configured my connection pool, datasource and JNDI in weblogic.
    In my java program i have the following code to retrieve the connection.
    import java.sql.*;    
    import java.util.Hashtable;
    import javax.naming.Context;
    import javax.naming.InitialContext;
    class jdbcshp1 {
        public static void main(String[] args) {
         Connection connection = null;
         try {
               Hashtable ht = new Hashtable();
               ht.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");  // Wanna get rid of this.
               ht.put(Context.PROVIDER_URL,"t3://localhost:7001"); // wanna get rid of this.
               // Get a context for the JNDI look up
               Context ctx = new InitialContext(ht);
            javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup ("myjndi1");
              //Create a connection object
              connection = ds.getConnection();
         The above code is working fine but, the two ht.put statements are creating problem.
    The problem is, after converting the application into WAR file it can be deployed
    on any machine or different port on same machine. My application fails if its deployed on
    weglogicserver which is at different port.
    Is there any way that i can get rid of those ht.put statements or any other way to solve the problem.
    any help is appreciated.
    Thanks in advance
    Pooja.

    Hai All,
    Firstly, thanks for ur reply.
    Even i have seen some code which uses context constructor with out any parameter and works fine.
    i dont understand why its not working for my code.
    When i remove those ht.put code and use context constructor with out any parameter, it giving an error.
    Context ctx = new InitialContext();
    javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup ("ocjndi");
    connection = ds.getConnection();The error is as follows:
    javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
    the above error is forcing me to include those code but if the port number is changed the code will not work. Plz let meknow if some setting have to be made.
    I appreciate all ur valuable help.
    Thanks once again.
    Pooja.

  • Logon Problems? Get support is not working in Portal logon Page

    Hi Experts,
    I have created A Role and assigned Logon_help action to it and assigned the Role to Anonymous group.
    So i have Logon Problem? Get Support link on Portal Logon Screen. When i click on it, i was asked to provide userid and email id.
    I have entered them. i got a message the my userid is reset and sent to my mail. but havent received any mail, and the password is changed which have to log in as admin and reset the password. 
    Help me this regards.
    Thank you
    Siva

    you might not have correctly configured your mail servers....
    refer below link
    http://help.sap.com/saphelp_nw70/helpdata/en/89/c5fd430b63c74bbdfaa5f2ec9bb20b/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/44/0761cea5c610b3e10000000a11466f/frameset.htm

  • Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5

    Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5?

    Only Apple knows the answer to whether or not there is a verified problem and if so when will a fix be released.  As is their custom, Apple does not talk about these things and the rules of these communities prohibit speculation about future udates or upgrades. It is probably safe to say if a fix is deemed necessary it will be called OS X 10.8.6.

  • Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

    Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
    When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
    I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

    Send it as html so the signature is an image source URL

  • Problem in getting parameter value from selection screen in web dynpro abap

    Hi,
    I am facing problem in getting parameter value from selection screen.
    Please find my code below:
    DATA LT_PAR_ITEM TYPE IF_WD_SELECT_OPTIONS=>TT_SELECTION_SCREEN_ITEM.
    FIELD-SYMBOLS:<FS_PAR_ITEM> LIKE LINE OF LT_PAR_ITEM,
                                 <FS_OBJ_USAGE>    TYPE REF TO data.
      WD_THIS->M_HANDLER->GET_PARAMETER_FIELDS( IMPORTING ET_FIELDS = LT_PAR_ITEM ).
      LOOP AT LT_PAR_ITEM ASSIGNING <FS_PAR_ITEM>.
        CASE <FS_PAR_ITEM>-M_ID.
          WHEN `OBJ_USAGE`.
             ASSIGN <FS_PAR_ITEM>-M_VALUE->* TO <FS_OBJ_USAGE>.      
    [ Here, sy-subrc is 4,  <FS_OBJ_USAGE> is not assigning.]
        ENDCASE.
      ENDLOOP. 
    So, can any one solve this problem.
    Thanks in advance,
    Radhika

    Hi Radhika,
    Try using GET_RANGE_TABLE_OF_SEL_FIELD...
    Please Refer below code..
       DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
      DATA: RT_CARRID TYPE REF TO DATA.
      DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
      DATA: WSFLIGHT TYPE SFLIGHT.
      FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
    Retrieve the data from the select option
      RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
    Assign it to a field symbol
      ASSIGN RT_CARRID->* TO <FS_CARRID>.
      CLEAR ISFLIGHT. REFRESH ISFLIGHT.
      SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
                           WHERE CARRID IN <FS_CARRID>.
      NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
      NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
    Thanks,
    Regards,
    Kiran

  • My dvd player will not let me change regions, it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

    My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

    Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
    So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
    Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
    Memory can be tested with memory diagnostics programs like Memtest+
    Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
    If the motherboard has no response then do the basics first:
    Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

  • If I report a problem and get a "you can't get

    If I report a problem and get a "you can't get your money back", is that the end or has the matter been sent to support for a look?
    What I did:
    I have family share and I found Xcom there with the cloud download symbol, I tapped it and it said "you can't download this", about how specific it was. I tapped it again and it started downloading, never asked for password (to my memory). Later I get an email stating that I had been charged for the game. I submitted a problem and got a fast response, "you can't get your money back". Now, is that it? Or has the matter been forwarded to Apple? If I am not happy, and it hasn't been forwarded where do I turn?

    It's Apple who told you no. That's it unless you want to try calling Apple Care.

  • Problems with getting my Ipod Touch to work on my Sony Bravia or any TV

    I am having problems with getting videos or movies to play on my Sony Bravia HDTV or any TV. I have a first generation Ipod Touch and I have the Apple AV Composite Cables and all I get is sound for both TV's that I tried. I read one post where some guy had a faulty Ipod that wouldn't work. Does anyone know how of something hidden or special that needs to be done or how did they fix the problem if they had the same one? Thank, ejcarlson

    Check connection, if you have a case on your Ipod the connection may not be good enough.

Maybe you are looking for

  • Requesting a New Firmware for Nokia 6303c !!!

    Hello... I have Nokia 6303c, but there are some problem, Ringtones Volume is low , Message Alert Volume is low, Camera is Grainy when Low light, Sometimes the phone  Restarts itself, When i apply a new theme is bit Laggy,  it get Hot after 10 min of

  • Saving WebI report with links to desktop in pdf format

    I have a user who is asking if a WebI report with drill down links can be saved to his desktop as a pdf and still have the links work. Has anyone had the same request?

  • Script issue

    Hi, someone gave me a template they purchased with a flash menu that they wanted me to fix the links inside of it. Now, i cannot find an answer to this anywhere, and i cannot figure it out by myself either and i've tried many combinations and solutio

  • GRC Migration

    Hello GRC Exports, We are planning to migrate GRC AC5.3 from Windows to Linux using the following procedure. Source system: Dual Stack GRC AC 5.3 on Windowsn 1. Export/Import the dual stack to target server. 2. Post-Processing steps as per the attach

  • Stock Transfer between Storage Location with Order

    Dear MM experts,  I am into SAP SD. Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting) But the unique requirement here is they require s