Problem in jsp...Need Help

Hi All,
I have a screen with 4 fields and 2 buttons at the end of the screen. As i tab out from the fields i want the focus to come on the buttons. What should i do for this?
Thanks & Regards,
Shwetha.

Check the 'tabindex' attribute which HTML offers you.

Similar Messages

  • Hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

    hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

    http://support.apple.com/kb/HT1808
    Regards.

  • Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

    Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

    Hi saiyed adil, 
    Thank you for contributing to the Apple Support Communities. 
    It appears that your iPhone 5s sometimes produces low sound, but a restart corrects it. 
    It can take some time to isolate and resolve intermittent issues like this one, and I'd recommend going through the steps in this guide the next time it occurs:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    All the best,
    Jeremy 

  • Using 2006 iMac running Mac OS 10.6.8. My iTunes App (11.3.1) will not launch. Upgraded to iTunes (11.4) but problem persists. Need help.

    Using 2006 iMac running Mac OS 10.6.8.
    My iTunes App (11.3.1) will not launch.
    Upgraded to iTunes (11.4) but problem persists.
    Need help.

    I have no answers for ya, but I do have the same problem, so we are not alone in this.
    My iTunes stopped working after I did a couple of software updates that got my iTunes up to v. 11.4. Since that update, I can't get iTunes to open at all, neither from my dock nor from the Applications menu.
    I'm wondering: Perhaps these latest iTunes updates are simply too advanced for my 10.6.8 operating system? If that's the case, how can I backtrack to an earlier version of iTunes that is compatible with my computer OS?
    Any thoughts?

  • Language problem in JSP please help

    Hi all java guru;
    Altough I tried all different way I can not solve the my problem.
    My problem is Turkish language problem in JSP.
    If my jsp page use database applications such as push or pull data to my SQL 2000 database or call some datas from database, some data which contains turkish caracter are seen wrong. suc as ����� is to ??????
    what is the problem?
    But important point is that; this is only Database data which come from sql database. But I can see JSP data or HTML data truly.
    I try different method to solve in JSP page;
    1-request.setEncoding("iso-8859-9");
    or
    request.setCharacterEncoding( "windows-1250" );
    2-
    @contentType="text/html; charset=iso-8859-9"
    @page pageEncoding="iso-8859-9"
    3-
    <meta http-equiv="Content-Language" content="tr">
    <META http-equiv="Content-Style-Type" content="text/css">
    4-
    ISO-8859-9 is turkish charecter spefications
    String TR_tlp = new String(NEW_TALEP.getBytes(),"ISO-8859-9"); // this parm is inserting database but problem is go on.
    5-
    for the database...
    Properties props = new Properties();
    props.put("user","login");
    props.put("password","password");
    props.put("charSet","UNICODE");
    6-
    url= "jdbc:microsoft:sqlserver://IP_NO:1433;databasename=database;TRUSTED_CONNECTION = true;CHARSET="+sun.io.ByteToCharConverter.getDefault().getCharacterEncoding();
    or
    url= "jdbc:microsoft:sqlserver://IP_NO:1433;databasename=database;TRUSTED_CONNECTION = true;CHARSET=ISO-8859-9"
    con= DriverManager.getConnection(url, kulad, sifre);
    I am using tomcat 5.0.19,
    is there any way to solve this problem... Please help......

    Were you ever able to solve your problem?
    I have a similar problem.
    My database is storing the characters correctly and they can be viewed in Java, but when I try to convert them to unicode using:
    String inputUtf8 = new String(input.getBytes(),charset);
    it works for almost all characters, but some come through as noncharacter "boxes."
    The characters that come through as boxes in iso8859-1 are the ones that are in the "supplementary" character range of that set, such as:
    - curved left and right quotes
    - "TM" symbol
    - bullets
    - m dash and n dash
    (see this table: http://www.csgnetwork.com/htmlchrset.html for a more complete list of the supplementary characters )
    Any idea what I need to do to have these characters show up properly?

  • I try signing into iMessage and it takes about 45-50 seconds to do. When that happens it tells me there is a network problem. I am positive I don't have a network problem and I need help on this problem please??

    I try to sign in and it just takes forever to do I try and try and do it over and over and it brings me the same results. Created a new Apple ID and when I did it still tells me there is a network problem. But the thing is I am still able to use the Internet I need help?? And it does the exact same thing for FaceTime so I don't know what to do??

    Error -3259 is a network timeout error, usually. This article might help:
    http://support.apple.com/kb/TS2799

  • I have a REAL problem that I need help with

    many thanks to kglad for all his help last week with a problem but it hasn't fully sorted it out. I have a site with 908 buttons. Basically a person clicks a button, makes a donation (through paypal) and then that button gets their name displayed when the mouse hovers over it. Essentially the button becomes the property of the person who makes the donation. The problem I need help with is how to disable each button when someone clicks it. Disabling a button isn't the problem. I need it disabled only when the person has made a valid donation. Each button has a unique instance name (b001 - b908). There must be a way.
    Many thanks in advance.

    I can't get this to work at all. At this stage, I'm considering a complete restructure of the site in dreamweaver.
    I would love to be able to complete it in actionscript though as I would be learning something new.
    When a user clicks a button, and goes through the paypal process, I need the clicked button to be disabled.
    It has to be such that it gets disabled only when a user has made a donation through paypal. For example, plenty
    of people may just click on the buttons as they are checking the site out, without any intention of using the paypal
    facility. This is just human nature. Obviously, I don' t want any buttons disabled under these circumstances.
    I was thinking, do I need a statement such as .......... "on returning from paypal, disable the clicked button"
    Or is it just a case of......... "on returning from paypal, remove the event handler"
    Or is it something completely different, I require, (please don't say a brain would be helpful).
    Is there some generic code out there that could help me out please.

  • Problem burning DVDs, NEED HELP QUICK

    Hey,
    I need help as soon as possible. I am using iMovieHD 5.0.2, along with iDVD 5.0.1. I have made a movie about 8 minutes long and all in all it totals 7.68Gigs, and i've tried burning it to a dvd. I did all the steps it says to, going to Share, sharing it with iDVD, then trying to burn it in iDVD. Yet whenever it asks me to insert a recordable dvd, i do, and the computer fails to recognize it. I am using a DVD-R, 4.7GB discs, 4x. I then realized that the movie i was trying to burn was larger than this disc, which might be the problem. I then created a 200mb movie and tried, but the same problem happened. My G5 is not recognizing the blank dvds, yet when i insert a dvd that was made a while ago from a different source, yet the same type of dvd, it plays fine.
    The problem seems to be in recognizing the blank DVD, and im pretty sure that its compatible with this computer, being that it plays when theres already a movie on it.
    Can someone please help me quickly, this is for a production company and we're losing out every day that i dont get this done. Thanks a million.

    I don't have an answer, but as an initial diagnostic step, try loading a blank DVD while iDVD is not running. First open your System Preferences and select the CD/DVD icon. Make sure the options selected do not say "Ignore". Then load a blank disc. Depending on your preferences, you should get some sort of reaction - either a burn window opens or you get a prompt asking you what to do. If there's no reaction from the Finder, it would indicate that the drive is not recognizing the blank DVD. This would be either a hardware or a media compatibility problem. Only way to tell for sure is to run out and try a different brand of media.
    - Andy
    PowerMac G5 dual 2.5   Mac OS X (10.4.4)  

  • Data base problem-new user need help

    im new user and trying to insert data base to my page using
    "asp.net c",i get connetction to my data base but when i try to
    build a form ,and then preview him i get ,the following message
    Server Error in '/' Application.
    Parser Error
    Description: An error occurred during the parsing of a
    resource required to service this request. Please review the
    following specific parse error details and modify your source file
    appropriately.
    Parser Error Message: File or assembly name DreamweaverCtrls,
    or one of its dependencies, was not found.
    Source Error:
    Line 1: <%@ Page Language="C#" ContentType="text/html"
    ResponseEncoding="iso-8859-1" %>
    Line 2: <%@ Register TagPrefix="MM"
    Namespace="DreamweaverCtrls"
    Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
    %>
    Line 3: <MM
    ataSet
    Line 4: id="DataSet1"
    Source File: e:\inetpub\wwwroot\Untitled-1.aspx Line: 2
    Assembly Load Trace: The following information can be helpful
    to determine why the assembly 'DreamweaverCtrls' could not be
    loaded.
    === Pre-bind state information ===
    LOG: DisplayName = DreamweaverCtrls, Version=1.0.0.0,
    Culture=neutral, PublicKeyToken=836f606ede05d46a
    (Fully-specified)
    LOG: Appbase = file:///e:/inetpub/wwwroot
    LOG: Initial PrivatePath = bin
    Calling assembly : (Unknown).
    ===
    LOG: Publisher policy file is not found.
    LOG: No redirect found in host configuration file
    (E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
    LOG: Using machine configuration file from
    E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
    LOG: Post-policy reference: DreamweaverCtrls,
    Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a
    LOG: Attempting download of new URL
    file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
    ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.DLL.
    LOG: Attempting download of new URL
    file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
    ASP.NET
    Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.DLL.
    LOG: Attempting download of new URL
    file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.DLL.
    LOG: Attempting download of new URL
    file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.DLL.
    LOG: Attempting download of new URL
    file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
    ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.EXE.
    LOG: Attempting download of new URL
    file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
    ASP.NET
    Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.EXE.
    LOG: Attempting download of new URL
    file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.EXE.
    LOG: Attempting download of new URL
    file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.EXE.
    Version Information: Microsoft .NET Framework
    Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
    I know its probably something stupid ,so u can lauph,but i
    realy cant fix it.
    need help
    tnx for advance

    anyone? please help

  • Toshiba HDD/SDD ALERT! - anyone having the same problem? I need help =/

    Okay, so I barely got this new laptop on Christmas and for several weeks now I've been having problems. My internet browser keeps saying (Not Responding) everytime I use it, which I think is due to this problem.
    I keep getting a pop up that says this :
    Disk0
    Your HDD has the SMART Predict Failure function which monitors the HDD operating status. Your HDD is experiencing a problem and SMART monitoring software predicts that the HDD will fail. Toshiba strongly recommends you create a back-up for your HDD data. Then contact an authorized service provider in order to check your drive and purchase a new replacement drive if necessary.
    I've backed-up my stuff already, but it still continues to say that. Anyone have any idea what why? and what I can do to fix it myself? it has been bothering me because it is the first thing that pops-up when I turn on my laptop. Thanks for reading and thanks for any help that I can get! Hope others that are having the same problem can get some help from my post as well!

    10 views

  • Problem with routing - Need help

    Hello,
    I need a little direction with what I think is a routing problem. Any help will be appreciated. My setup is as follows:
    Cable Modem
    27.177.21.9
    WAN - Gi0/0
    27.177.21.10
    Cisco 2901
    LAN - Gi0/1
    192.168.1.250
    Client
    192.168.1.10
    The Problem
    Router can ping LAN interface
    Router cannot ping WAN interface -X
    Router can ping Cable Modem
    Client
    Client can ping LAN interface
    Client can ping WAN interface
    Client cannot ping Cable Modem -X
    Here is my routing table:
    Gateway of last resort is 27.177.21.9 to network 0.0.0.0 (this is my cable modem)
    S*    0.0.0.0/0 [1/0] via 27.177.21.9
                    is directly connected, GigabitEthernet0/0
          27.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
    C        27.177.21.8/30 is directly connected, GigabitEthernet0/0
    L        27.177.21.10/32 is directly connected, GigabitEthernet0/0
          192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
    C        192.168.1.0/24 is directly connected, GigabitEthernet0/1
    L        192.168.1.250/32 is directly connected, GigabitEthernet0/1
    Here is a portion of my configuration:
    interface GigabitEthernet0/0
     description Cable Internet$FW_OUTSIDE$$ETH-WAN$
     ip address 27.177.21.10 255.255.255.252
     zone-member security out-zone
     duplex auto
     speed auto
    interface GigabitEthernet0/1
     description hbc_staff$FW_INSIDE$$ETH-LAN$
     ip address 192.168.1.250 255.255.255.0
     zone-member security in-zone
     duplex auto
     speed auto
     no mop enabled
    ip default-gateway 27.177.21.9
    ip forward-protocol nd
    ip http server
    ip http access-class 23
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 600 life 86400 requests 10000
    ip route 0.0.0.0 0.0.0.0 27.177.21.9
    ip route 192.168.1.0 255.255.255.0 27.177.21.9
     Thanks in advance

    Hello Jon,
    I continue to try different configurations to get my router to connect without success. I am now trying NAT and this is where we stand now. Any help will be much appreciated.
    The problem
    Router now pings everything by ip address or name
    Client PC from inside the LAN cannot ping modem or Internet
    Relevant parts of configuration:
    ip domain name mydomain.org
    ip name-server 24.247.15.53
    ip name-server 66.189.0.100
    interface GigabitEthernet0/0
     description Internet$FW_OUTSIDE$ETH-WAN$
     ip address 27.177.21.10 255.255.255.252
     ip nat outside
     ip virtual-reassembly in
     duplex auto
     speed auto
    interface GigabitEthernet0/1
     description hbc_staff$FW_INSIDE$$ETH-LAN$
     ip address 192.168.1.250 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
     zone-member security in-zone
     duplex auto
     speed auto
     no mop enabled
    ip nat pool HBC-I 27.177.21.10 27.177.21.10 prefix-length 24
    ip nat inside source list 7 pool HBC-I overload
    ip route 0.0.0.0 0.0.0.0 27.177.21.9
    ip route 192.168.1.0 255.255.255.0 GigabitEthernet0/1
    access-list 7 permit 192.168.1.0 0.0.0.255
    #show ip route
    Gateway of last resort is 27.177.21.9 to network 0.0.0.0
    S*    0.0.0.0/0 [1/0] via 27.177.21.9
          27.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
    C        27.177.21.8/30 is directly connected, GigabitEthernet0/0
    L        27.177.21.10/32 is directly connected, GigabitEthernet0/0
          192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
    C        192.168.1.0/24 is directly connected, GigabitEthernet0/1
    L        192.168.1.250/32 is directly connected, GigabitEthernet0/1
    When pinging the modem from a client inside the LAN this is what I get from NAT translations and statistics:
    #sho ip nat translations ver
    Pro Inside global         Inside local          Outside local         Outside global
    icmp 27.177.21.10:40709   192.168.1.8:40709     27.177.21.9:40709     27.177.21.9:40709
        create 00:00:05, use 00:00:00 timeout:60000, left 00:00:59, Map-Id(In): 1, 
        flags: 
    extended, use_count: 0, entry-id: 4, lc_entries: 0
    #sho ip nat statistics
    Total active translations: 2 (0 static, 2 dynamic; 2 extended)
    Peak translations: 2, occurred 00:00:04 ago
    Outside interfaces:
      GigabitEthernet0/0
    Inside interfaces: 
      GigabitEthernet0/1
    Hits: 104  Misses: 0
    CEF Translated packets: 104, CEF Punted packets: 0
    Expired translations: 7
    Dynamic mappings:
    -- Inside Source
    [Id: 1] access-list 7 pool HBC-I refcount 2
     pool HBC-I: netmask 255.255.255.0
        start 27.177.21.10 end 27.177.21.10
        type generic, total addresses 1, allocated 1 (100%), misses 0
    Total doors: 0
    Appl doors: 0
    Normal doors: 0
    Queued Packets: 0

  • Having problems with burning - need help please!

    when I try and burn a disk itunes says no recording
    software found. Everytime I start up itunes it says the drivers associated with burning are missing. It ask me to
    reinstall the software which I do and I have the same
    problem. I have other burning software but cant burn any
    itunes Ive purchased do to the format. Any help would be greatly appreciated.
    The german note is:
    Achtung
    Die Registrierungseinträge für die iTunes Treiber zum Import und Brennen von CDs und DVDs fehlen. Diese kann Folge der Installation einer anderen Software zum Brennen von CDs sein. Bitte installieren sie iTunes erneut.
    Could anybody please help me??

    I need more information about your hardware configuration. Run the iTunes Help menu -> Run CD Diagnostics... command and post the results here.
    I'm assuming that you're not running 64-bit windows.
    It sounds like the driver didn't get installed. You could try doing a repair install on iTunes --
    Windows Start menu -> Settings -> Control Panels -> Add or Remove Programs
    Select iTunes, Select Change/Remove button, Select "Repair" radio button, click OK.
    If that doesn't work, you might try downloading just the CD drivers from :
    http://www.gearsoftware.com/support/drivers.cfm
    Get the first link, not the second one that talks about gearsec compatibility.

  • Serious problem with database need help

    hello experts
    i am working with MS-ACCESS and connecting it with java programing
    now the problem with me are
    according to my need i have to create a table that contain Autonumber field
    but when i insert element in this table by query
    String query1 = "insert into Forum (Subject,Author,Date,Reply) values('"+param1+"','"+username+"','"+dateformat+"',"+reply+")";
    st1 = con1.createStatement(); it gives sql exception but when i remove
    autonumber field and make it simple field it works ok but i want to keep autonumber field and thn want to insert it
    is it possible to create a dynamic table in ms-access through java query like
    String query3 = "create table"+"topicId"+"( message varchar(1000) NOT NULL,author varchar(50) NOT NULL, date varchar(30) NOT NULL)";
    here topic id some variable that contain table name
    i think problem is that MS-ACCESS has no varchar data type plz help me
    The complete code i written is as follow
    <html>
    <%@ page language="java" import="java.sql.*,java.text.*"  %>
    <head>
    <title> Processing the post request </title>
    </head>
    <body background ="images/modbkgnd.jpg" bgproperties="fixed" >
    <%
       String param1="",param2="",topicId="";
       Connection con1=null;
       Statement  st1=null;
       ResultSet rs1=null;
       int a=2,reply=0;
       java.util.Date date = new java.util.Date();
       DateFormat df ;
       df = DateFormat.getDateInstance(DateFormat.FULL ,java.util.Locale.UK);
       String dateformat = df.format(date);
       String username = (String)session.getAttribute("forumlogin");
       param1=request.getParameter("Subject");
       param2 =request.getParameter("message");
    try
       Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
       con1 = DriverManager.getConnection("jdbc:odbc:lingua");
       String query1 = "insert into Forum (Subject,Author,Date,Reply) values('"+param1+"','"+username+"','"+dateformat+"',"+reply+")";
       st1 = con1.createStatement();
       out.print("hello i am here");
       boolean posubject = st1.execute(query1);
       out.print("hello i am here");
       String query2 = "select *from Forum";
       rs1 = st1.executeQuery(query2); //retriving table id for creating
        out.print("hello i am here");  //  message table
       while(rs1.next())
           topicId = rs1.getString(1);
       String query3 = "create table"+"topicId"+"( message varchar(1000) NOT NULL,author varchar(50) NOT NULL, date varchar(30) NOT NULL)";
       boolean createtable = st1.execute(query3);
       out.print("hello i am here");
       if(createtable)
          String query4 = "insert into"+"topicId"+"values('"+param2+"','"+username+"','"+dateformat+"')";
          boolean insertmess = st1.execute(query4);
    }catch(SQLException ex){
        out.print("sql exception");
    finally
       st1.close();
       con1.close();
    %>
    </body>
    </html>

    hello experts
    first i change my Date to date and thn try but it was not working.
    and thn i try as dinesh_tcs said
    i change my query as
    String query3 = "create table"+"topicId"+"( message string NOT NULL,author string NOT NULL, date string NOT NULL)";
    but nothing help me
    one more thing actually i don,t want to insert manually the field of autonumber what i want that my query work when i leave the autonumber field to insert values in the table ( or whatever way i want to insert values in that table by keeping autonuber given by MS_ACCESS)
    plz do the change in code i have maintained above or if not possible thn write the query that u have tested

  • IMac G5 problem...Need help

    This is my first time posting to the IMac G5 discussions, and I hope someone here can really help.
    Something weird is happening to my computer when it is being turned on. Nothing on the screen is displayed, and there is a constant beeping sound. Plus the white power light on the lower right, is flashing on and off, and the fan is at very high speed. I'm not sure what is happening, but here are some information on what I did, before I turned it on.
    Basically I performed a simple 1 gig memory upgrade (crucial ram), and then when I closed the cover to put the screws back on, I accidentally inserted my screwdriver into the "speaker port", which I believe is adjacent to the lower fan. It is the hole, next to the first screw. I was mistakenly thinking that it was one of the three screws, that need to be tighten again.
    Does anyone know what could be the problem or some kind of replacement that I might need.
    I am using an IMac G5 17", which came with 256 mb standard, back in Feb 2005.

    I never thought of bringing my computer to a service center. Forgive me for asking such a basic question, but can I bring this into my local Apple Store instead. This is where I made my purchase. I heard there is something called a genius bar. How does that work. Is there a fee involved?
    Since I got the IMac G5, back in Feb 2005, will this type of assistance be covered by the limited one year warranty?

  • E3000 LAN/CONNECTIONSHARING problems..really need help.

    I couldn't find this exact problem being discussed here, so sorry if this has been covered.  I have multiple machines all running Windows 7 Home Premium, a couple are 64b, the others are 32b.  For some odd reason I cannot get all of them to see each other on the LAN.  They all will connect up to the E3000, however they will not/can not find one another on the LAN to achieve file sharing.  I'm a long time ROUTER user so I know all of the basics of what I need to do to share....ie...all computers have same subnet mask, they are all in the same workgroup...etc...etc.  Technically, I'm having the most trouble with this blasted Sony VPCL116FX that has a Atheros AR928X Wireless Network Adaptor in it.  I have the most up to date driver installed for it..so I don't know.  Also, I should note that I was able to successfully ping two computers that I was using to troubleshoot the problem with.  I just cannot get them to see one another within W7.  Heck, I cannot even get them to recognize that one/or the other has been set up with a "Homegroup".  The Homegroup option has always been the easiest way (for me) to get computers to recognize each other on a LAN, but now however, it's not happening.  Any help would be GREATLY appreciated.  Thanks for your time.

    UPDATE:  This is an update to my original post.  I decided to go back and re-install the router on the LAN and this time NOT use the quickKEY function and just set them up manually.  It worked.  So, my verdict is that something in the preparation of the quick key by the router software got messed up somehow because by setting it up manually it now functions properly with connections on all machines.  I hope this helps someone out there in Linksys land.  
    The thread is dead/answered.

  • Finder problems PLEASE I NEED HELP!!

    Hey there,
    I've got a major problem with my finder. When I log into my account, it says that the finder is not running. Also, I cannot access my harddrive. When I try to open a program, as soon as I type anything or click of the apple button in the upper lefthand corner, the program "unexpectedly quits" and I get logged out.
    ANY HELP WOULD BE APPRECIATED!
    I have finals this coming week and need the files that I cannot access!!
    iBook G3 (a lemon....)    

    Sorry about the typo (mgz was supposed to read mhz)
    First of all, boot from your Jaguar disk (insert the CD, hold the "c" key while starting up). Don't continue with installation, but go to menu, find and click on disk utility and click repair disk. If errors are found, run the procedure again until there are none.
    Then start up to your login window as usual. Select your account and type in your password. Press and hold the Shift key and while doing that, hit return or click on the log in button. Now you have disabled your login items. If Finder functions normally, then the glitch was in one of the login applications and you will need to go through the process of going through them one by one until you finder the "offender." If Finder continues to quit then there may be a corruption in the Finder preference list, which will be a bit trickier to get into since you can't get into your system the normal way. So, let's try the easier thing first.

Maybe you are looking for

  • 10.8.4 consistent nvidia crash when waking from sleep

    On a Mid 2012 Macbook Pro I am getting a crash every time the nvidia card is engaged and the laptop goes to sleep.  This only started occuring after ugprading to 10.8.4 and I have since zeroed, formatted and reinstalled with a minimal set of applicat

  • Spark Classes and Skins not being included when running FlexUnit task via Ant

    I have a series of unit tests that run on a spark component. This spark component has a custom skin defined for it, and that is working beautifully. Inside that component is a spark list... By default, after digging into the list code, spark lists sh

  • Why can't I connect to my DVR with iOS6?

    I have recently updated to iOS6 on my iPhone 4S, and MobileViewer and MobileViewer 2 (which I use to connect to my DVR security system) is not able to connect following the update. All it says is "trying to connect".  I have tried the software on 5.x

  • 6131 Micro SD Card Problem

    Hi everyone, really hope i can get help on this I have a 128MB card in my phone which I have used perfectly fine until now.. In an options menu, i created a password for the memory card. Since then the card doesn't show in 'Gallery' where it should.

  • How Make the Report Fields Read only

    Hi I have drop down selection in a Report field.After selecting a particular value and submiting it the field should become readonly.