Problem in message mapping due to file sender content conversion

Hi all
basically i m using file sender content conversion and couldn't make file in a proper nested structure where weight was the nested field of detail as there is a limitation of content conversion in file adapter:
My file came out like this:
<header>
</header>
<Detail>
</Detail>
<Weight>
</Weight>
<Weight>
</Weight>
<Detail>
</Detail>
<Weight>
</Weight>
<Weight>
</Weight>
<trailer>
</trailer>
and i wanted it like:
<header>
</header>
<Detail>
<Weight>
</Weight>
<Weight>
</Weight>
</Detail>
<Detail>
<Weight>
</Weight>
<Weight>
</Weight>
</Detail>
<trailer>
</trailer>
so now the problem is i want to generate an idoc from it....but theres no way out to determine which weight is related to what detail except that the weight related to detail 1 comes after start and end of detail 1 tag and then weights of second detail comes after start and end of detail 2 tag in my source xml file.
The structure of the target idoc is
<header>
</header>
<Detail>
<Weight>
<flag>D1</flag>
</Weight>
<Weight>
<flag>D1</flag>
</Weight>
</Detail>
<Detail>
<Weight>
<flag>D2</flag>
</Weight>
<Weight>
<flag>D2</flag>
</Weight>
</Detail>
<trailer>
</trailer>
so i was wondering if i can make a user defined function in which i feed detail and weight and result a flag d1/ d2 inside the tag field. My logic is smth like
while detail is 1 make all the tag weights coming after detail 1 inside <detail1> tag then resultlist.CC for context change then while detail is 2 make a loop to fill the weight coming after detail 2 inside the <detail2>
Is this possible by any means. I really need help
Thnks
Naina

Hi
My sender file content conversion have this setting:
HEADER,1,DETAIL,*,Weights,*,TRAILER,*
And plz give me more idea of the adapter module ....is there any blog available which is related to my problem.
Naina

Similar Messages

...file Sender content conversion 'lastFieldsOptional' error

Hi All,
I am working on a File Sender content conversion--> flat file to XI.
it's fixed length field all the rows with same column.
090627 344535AFDFG+GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090628 344536AFDFG+GBP45434 ASDSSD GFD dFSSGFD 6757532
090628 344536AFDFG-GBP45434 ASDSSD GFD dFSSGFD 6757532
**EOF**
I am sucessfully able to handle the file if i remove "**EOF*" from incoming file. But i get "lastfieldsOptional" error with "*EOF**"
>
Parameters-
     Recordset Structure - ROW,*
     Recordsets per message - *
    ROW.fieldFixedLengths - 6,8,20,10,30,1,3,1,11,1,11,6,10,10,20,10,10,2,6,6,2,6,6,3
    ROW.fieldNames - INV_DATE,INV_NO,PAYMENT_REF,CUST_NO,CUST_NAME...etc etc
   ignoreRecordsetName - true
There are parameters available to ignore Last field(last column) of a Row/Rocerdset
but how to ignore the last row of the file.
Plz suggest some parameter to ignore the last row/field of the file.
Regs,
Ansh

Ansh,
.lastFieldsOptional is obselete and you cannot use. Please see sap help:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
The best thing comes to my mind is use:
.keepIncompleteFields as YES
Also give a try with:
.missingLastfields as add
So with this I think your last line in the file will read into XI. But the value of last line is **EOF**. So the length is 9. Since your the first two fixed lengths are 6 and 8. You will have these values as ***EOF and ***. So while mapping you can use doesnot satrt with * and map it, so that your last line will be ignored.
Note: with this apporach you have to make sure your first two columns never start with *. If you have a doubt then you can use the condition doesnot equal to ***EOF for first field and doesnot equal to *** for the second field when you map. I hope it makes sense to you.
Regards,
---Satish

File sender content conversion 0..unbounded does not pull file

i am trying to map a flat file using content conversion to this xml structure:
<Header>
<Field_ID/>
<Filler/>
<Record_type/>
<File_name/>
<File_date/>
<File_time/>
<Heb_code/>
<Claim_no/>
<Cont_no/>
<Remark/>
</Header>
<Claim_Header>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<License_no/>
<ODO_meter/>
<Claim_type/>
<VIN_code/>
<Claim_open_date/>
<Claim_fix_date/>
<N_code/>
<C_code/>
<Ejob1/>
<Ejob2/>
<Page_no/>
<Pre_conf_date/>
<Pre_conf_no/>
<Part_buy_date/>
<KM_prev_fix/>
<Bill_prev_fix/>
<Material_fault/>
<Damage_whole/>
<Damage_code/>
<Job_amount/>
<Towing_amount/>
<Parts_amount/>
<Hour_rate/>
<Cont_mark/>
</Claim_Header>
<job_row>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<page_no/>
<line_no/>
<shaaton_code/>
<job_finish_code/>
<amount/>
<job_time/>
<row_value/>
<color_code/>
</job_row>
<part_row>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<page_no/>
<line_no/>
<material_code/>
<amount/>
<unit_price/>
<row_value/>
</part_row>
<remark>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<page_no/>
<line_no/>
<remark/>
</remark>
<footer>
<Field_ID/>
<Filler/>
<Record_type/>
<File_name/>
<File_Record_no/>
<Claim_no/>
<Cont_no/>
<Remark/>
</footer>
job_row, part_row and remark are records that occur 0..unbounded.
when i write in recordset structure: Header,1,Claim_Header,1,Job_Row,1,Part_Row,1,Remark,1,Footer,1
and put file with one record each, the file is pulled, but when i change recordset structure to:
Header,1,Claim_Header,1,Job_Row,* ,Part_Row,* ,Remark,*,Footer,1
the file is not pulled.
can anyone tell me what i'm doing wrong?
thanx
Tomer

Hi,
Refer this links for FCC.
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani

File sender content conversion

hello
I have a txt file sender content conversion in SAP PI.
I define in the content conversion 6 fields names(field1, field2, field3,field4,field5,field 6) but the fie that I am loading has only three field(field1,field2,field3). the file is still loading though there is a different in the structure between what I define in the PI to what is loading to the PI.
is there a way to send an error with out loading the file?
I read about the count function in the mapping. isnt there a build in function that suppose to load only the structure that is define?
Thanks
Kfir

If you define 6 fields and only 3 are present in the test file then you wont get an error (AFAIK)
However, if you define 3 fields and there are 6 present in the source file then you will get an error saying more number of parameters found.
isnt there a build in function that suppose to load only the structure that is define?
I dont think so....this may however be achieved using a custom adapter module.
Update:
Just remembered that SAP PI (7.1 and above) comes with inbuilt XML-validation function....check if that helps in your design.
Regards,
Abhishek.
Edited by: abhishek salvi on Dec 15, 2010 1:12 PM

Challenge in File Sender Content Conversion

Hi,
I have a real challenge concerning File Sender content conversion in SAP XI.
My flat file looks like this:
##H   300
MAR   206
KAS 1
DAT 01.03.08
ART 1.129
KUN 118
EAN 4.499
REL 5.0j 16.05.06
SER             1
##E   300
##H   301
DAT 01.03.08
ZEI 07:54
KAS 1
##E   301
Each row represents a data field and has two values: The first one defines the field name, the second represents the field value. E.g. 'DAT' stands for Date and has the value 01.03.08 in the example.
The fields belonging together in one data set are enclosed by a start qualiefier (##H)and an end qualifier (##E).
The value after these qualifiers (i.e. '300' and '301' in the example above) represent a certain record type, e.g. '300' represents Customer data and '301' represents Account Data.
Is it possible with file content conversion to create the following XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DATA xmlns:ns0="http://sap.com/xi/account">
     <300>
          <MAR>206</MAR>
          <KAS>1</KAS>
          <DAT>01.03.08</DAT>
          <ART>1.129</ART>
          <KUN>118</KUN>
          <EAN>4.499</EAN>
          <REL>5.0j 16.05.06</REL>
          <SER>1</SER>
     </300>
     <301>
          <DAT>01.03.08</DAT>
          <ZEI>07:54</ZEI>
          <KAS>1</KAS>
     </301>
</ns0:MT_DATA>
If it is not possible with content conversion, what could be an alternative? Adapter Module? MultiMapping?
I'd really appreciate your input as I am working on this since several days without a solution.
Thanks in advance.
Alex

It is not possible thru adapter..
There is one blog to convert such files to XML sing java mapping. Search for any flat file to Idoc or xml in the forum.
VJ

File Sender Content Conversion: Help needed

Hello Experts,
i need help with file sender content conversion:
i have a file which looks like this:
12329460 24.01.09/07:01 167     Y010122851 136086 43300007            E70115 1L2_96_1
12329660 25.01.09/07:02 157     Y010122851 136086 43390007            E711J5 1L2_96_1
as you can see 8 fields, separated with whitespaces
and i want and xml file which looks like this:
<DT_DATA_FILESENDER>
<Recordset>
      <Data>
        <field1>12329460</field1>
        <field2>24.01.09/07:01</field2>
        <field3>167</field3>
        <field4>Y010122851</field4>
        <field5>136086</field5>
        <field6>43300007</field6>
        <field7>E70115</field7>
        <field8>1L2_96_1</field8
     </Data>
      <Data>
        <field1>12329660</field1>
        <field2>25.01.09/07:02</field2>
        <field3>157</field3>
        <field4>Y010122851</field4>
        <field5>136086</field5>
        <field6>43390007</field6>
        <field7>E711J5</field7>
        <field8>1L2_96_1</field8
     </Data>
</Recordset>
Would you please let me know how the datatype has to look like?
And especially how the FCC has to be configured for this scenario?
Thanks in advance,
Chris

> With fixed lengths i get it working,
>
> but with de fieldseparator 0X09 it does not work,
> would you please tell me the complete FCC config not only the fieldSeparation line?
Well Christian,
There is one thing, eithere you can use fieldSeparator or fieldFixedLengths you can not use both together. So in your case do not use fieldSeparator.
The complete FCC is almost same as given in the blog in my previous reply. See the final output in that blog and create your data type accordingly. e.g.
Recordset
------Item 0...unbound
--------Field1 0..1
--------Field2 0..1
--------Field3 0..1
--------Field8 0..1
Regards,
Sarvesh

File Sender Content Conversion Empty Fields

Hi
i have a problem with a filecontentconversion in the file sender adapter.
my incoming csv has the following structure:
ID,name,,,,,,,email,tel,,,,,
in the xml that i am processing i would just need a structure
<rootnode>
<user>
<ID></ID>
<name></name>
<email></email>
<tel></tel>
</user>
</rootnode>
i would like to ignore the rest of the fields.
can anybody tell me if its possible to make a conversion like this or do i have to define a structure where all elements are included ?
thanks ,
martin

Hi Martin,
In the data type for your sender Service Interface, just set the occurrence of your optional fields to 0..1. Thanks to this, they will not be created by FCC for empty values from a file, which is what you want to achieve.
Hope this helps,
Greg

File sender content conversion problem.

Hi,
I am Working on File to RFC scenario .
Source file is zipped and has next structure:
HEADER1 FIELD1 FIELD2...
HEADER2 FIELD1 FIELD2...
    DETAIL FIELD1 FIELD2...
    TXT DESCRIPTION1
    TXT DESCRIPTION2
    DETAIL FIELD1 FIELD2...
    TXT DESCRIPTION1
    TXT DESCRIPTION2
HEADER1 FIELD1 FIELD2...
HEADER2 FIELD1 FIELD2...
    DETAIL FIELD1 FIELD2...
    TXT DESCRIPTION1
    TXT DESCRIPTION2
    DETAIL FIELD1 FIELD2...
    TXT DESCRIPTION1
    TXT DESCRIPTION2
I've tryed with
zip.mode --> unzip
Transform.Class --> com.sap.aii.messaging.adapter.Conversion
xml.HEADER1.fieldFixedLengths --> 3,3,17,8,4
xml.HEADER1.fieldNames --> ID,NODO,REDO,FEDO,HODO
xml.HEADER2.fieldFixedLengths --> 3,13,17,13
xml.HEADER2.fieldNames --> ID,QFAC,REDO,AQSP
xml.DETAIL.fieldFixedLengths --> 3,13,30,5,10,16,3,16,3,16,3,16,5,16,3,1,17,3
xml.DETAIL.fieldNames --> ID,QFAC,NOMPRO,NUMPLA,TIPRAP,CONIND,TIPCON,RAPPTS,MONRAP,BASERP,MONEDA,CUOTA,TIPIVA,TOTRAP,PERLIQ,NOCOB,NUFA,TIPLIQ
xml.DETAIL.keyFieldValue --> DETAIL
xml.TXT.fieldFixedLengths --> 3,70
xml.TXTfieldNames --> ID,TEXTO
xml.TXT.keyFieldValue --> TXT
xml.conversionType --> StructPlain2XML
xml.documentName --> MT_I4303_LIQRAP
xml.keyFieldName --> ID
xml.recordsetsPerMessage -->1
But error:
Exception: ERROR in structure conversion plain->xml configuration: message split not allowed here'; nested exception caused by: java.lang.Exception: ERROR in structure conversion plain->xml configuration: message split not allowed here
Thanks,
Carme

Dear Carme
I am also trying to use parameter xml.recordsetsPerMessage = 1 of Module MessageTransformBean to get one PI message per document (in my case per line) available in text file.
like you I am also facing the error
Attempt to process file failed with com.sap.aii.af.sdk.xi.adapter.trans.TransformException: Error converting Message: 'java.lang.Exception: ERROR in structure conversion plain->xml configuration: message split not allowed here'; nested exception caused by: java.lang.Exception: ERROR in structure conversion plain->xml configuration: message split not allowed here
but I was not able to solve it by additional parameter xml.recordsetStructureOrder = var
could you please share more details on your solution?
Thanks
best regards
Jochen

File Sender, Content Conversion - how to define variable length last field?

XI 3.0 SP17
With a File Sender communication channel, that uses Content Conversion - how do I define a 'variable length' last field?
The scenario - the input file has four fields, of which the first three are a known fixed length, and the last (fourth, trailing) field is variable in length.
Using a Message Protocol of 'File Content Conversion', how do I define that last variable length field (field name 'WOData' below) in the Content Conversion Parameters section?
My current parameters are:
Recordset Structure - Row,*
ignoreRecordsetName - true
Row.fieldFixedLengths - 1,12,5,99999
Row.fieldNames - WOType,WONum,WOLine,WOData
I've tried the following for 'Row.fieldFixedLengths' to no avail -
'1,12,5,*'
'1,12,5,0'
'1,12,5,'
'1,12,5'
The last two were grasping at straws )
The only thing I've got to work is specifying a 'large' value for the final field (99999 above).
In addition, does anyone know if specifying a large value (e.g. 99999) for the final trailing field will give rise to performance issues when the file is being processed?
In the help for "Converting File Content in a Sender Adapter", it states -
<Begin Quote>
NameA.fieldFixedLengths
If you make a specification here, the system expects a character string that contains the lengths of the structure columns as arguments separated by commas.
If you also specify a separator for the columns, you must not add its length to the length of the columns.
This entry is mandatory if you have not made an entry for NameA.fieldSeparator.
<End Quote>
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm

<< note that fieldFixedLengths will not take any wildcard entries like *. So in these case it is ideal to provide a maximum char length. But note that while the file is being created that many spaces will be created in your file !!! >>
Hi Shabarish,
Yes, no wildcard is the conclusion I came to, hence my maximum )
The message size did not increase by any 'blank padding'. When I look in [Message Display Tool (Detail Display)] 'Audit Log for Message: X' -
2006-10-17 18:22:42 Success Channel X: Entire file content converted to XML format
2006-10-17 18:22:42 Success Send binary file "X" from FTP server "X", size 103290 bytes with QoS EO
2006-10-17 18:22:42 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-10-17 18:22:42 Success Trying to put the message into the send queue.
2006-10-17 18:22:42 Success Message successfully put into the queue.
2006-10-17 18:22:42 Success The application sent the message asynchronously using connection AFW. Returning to application.
The input flat file in non-XML format was 92,132 bytes and the message payload into XI was 103,290 bytes.
My understanding is that trailing spaces are stripped from XML nodes.

Problem in message mapping index.

HI All,
I am doing idoc to file scenario.
I have a problem in message mapping.
Issue is,
pallet1
palletheader(here i used counter to increment the value)
palletline(here i used INDEX to increment the value)
        pallet linenumber1(it should be 1)
        pallet linenumber2(it should be 2)
so on       )
so on
pallet2
palletheader
palletline
        pallet linenumber1(here again it should be 1)
        pallet linenumber2(here again it should be 2)
so on              )
so on
In INDEX we have option called reset index in that we have two radio buttons
one is "reset index to intial value with each new context"
and next one is "donot reset index to intiak value"
if i use the first radio button which is working fine in only one pallet and more pallet lines but not more than one pallet.
If i use the second radio buttton which is working fine in more than one pallet but not satisfying the more pallet lines in one pallet.
Can you please help me on the issue

my requirement is like this.
IF DELVRY05/IDOC/E1EDL20/E1EDL24/POSNR equals to /DELVRY05/IDOC/E1EDL20/E1EDL37/E1EDL44/EXIDV
then map to 'pallet line' .
I tried to keep posnr context as E1EDL20 and also IDOC level.
And at the same way to EXIDV too.
pallet(1 to unbounded)
   pallet header(1 to 1)
   pallet lines(1 to 1)
        in sub level pallet line(1 to unbounded) (here i applied the index logic)
The out put should be pallet line 1,2,3,----- so on
In the second pallet the pallet lines should be again 1,2,3,4-------so on .
But when i try to apply thsi logic,
I am getting only one pallet line instead of two.
second is not comming .
please help on this i am facing this problem for the long time back.
if i solve then i can complete my scenario.

Problem with message mapping ...

Hello,
I have problem with message mapping. I implemented SOAP-to-RFC scenario. The source message is of type http://sntcz.cz/xmlns/holidays:MT_Holiday, the target message of type urn:sap-com:document:sap:rfc:functions:Z_GET_SUPERIOR. But some error is still generated in Request Message Mapping step:
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:Z_GET_SUPERIOR/USR. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at .....
This is XSD definition of source message:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sntcz.cz/xmlns/holidays" targetNamespace="http://sntcz.cz/xmlns/holidays">
<xsd:element name="MT_Holiday" type="DT_Holiday" />
<xsd:complexType name="DT_Holiday">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
030495e1742f11dd963600301875333b
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="SinceDay" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fba049b067aa11dd8be6eee20abb2a3f
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="SinceMounth" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fba293a067aa11dda311eee20abb2a3f
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="SinceYear" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fba293a167aa11dd9b4eeee20abb2a3f
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="UntilDay" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fba293a267aa11ddc352eee20abb2a3f
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="UntilMounth" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fba293a367aa11ddc33aeee20abb2a3f
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="UntilYear" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fba293a467aa11dda8cfeee20abb2a3f
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="UserId" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
fba293a567aa11dd9698eee20abb2a3f
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
This is XSD definition of target message:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions">
<xsd:element name="Z_GET_SUPERIOR">
<xsd:complexType>
<xsd:all>
<xsd:element name="USR" type="xsd:string" minOccurs="0" />
</xsd:all>
</xsd:complexType>
</xsd:element>
</xsd:schema>
It's strange that if I use Message Mapping Test it works fine. But in pipeline not.
Do you have any idea where could be the problem?
Thank you in advance!
Best regard,
Zbynek

Hi,
To know the correct error Take the Inbound Payload from MONI and Test it in Mapping Test TAB. then u will come to know the exact error.
Procedure to take the Payload
goto MONI-Double click on MessageInbound Message ( CENTRAL ) --Payloads ---Double click on MainDocument ( application/xml ) -Just Right Click on the second window-View Source
then now Copy this and paste it in Mapping Test and Execute.
REgards
Seshagiri

Sender File Adapter - Content Conversion

HI Friends,
I got a scenario where I need to convert the File to XML document through Sender file adapter..
My file looks like below.
BATCH1234........
12DASER123142JMM
237DSAFDLKC839890
45SDFLASJ90011
BATCH3455...
132FGAR
SD21352525
BATCH998898...
123145DSRTW
12FSTS
So there is a Header and Body for each record set..
My XML Structure is as follows.
<TimeStructure>
<TimeRecord>
     <ControlRec>
         <Field1>BATCH </Field1>
         <Field2> ...</Field2>
     </ControlRec>
     <DataRec>
         <F1> ...... </F1>
         <F2> ...... </F2>
     </DataRec>
</TimeRecord>
<TimeRecord>
     <ControlRec>
         <Field1> BATCH </Field1>
         <Field2> ADFAS </Field2>
     </ControlRec>
     <DataRec>
         <F1> ...... </F1>
         <F2> ...... </F2>
     </DataRec>
   </TimeRecord>
</TimeStructure>
The blog <a href="/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem:///people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
is somewhat relevant to my requirement.
But the problem is I have the keyfield "BATCH" for my header file but don't have any <b>key field in the data record</b> of the input file.
Please help me out how to mention the configuration parameters.
Regards,
Kumar

Hi,
If you don't have constant key value for your detail records, then you can not directly get the required xml.
So in this case, you can read all the records in a common Row model, i.e each record will be considered as a one row with all the values, and then split this row with Substring or java functions in the mapping.
Even you can do this in the Adapter module .
If you have key value for each record to identify then you can try with content conversion.
Regards,
Moorthy

Sender content conversion parameters

what wld be the sender content conversion parameters for the following structure?
MessageType        1-1
    Records            1-1
       File                1-unbounded
thanks

Hi,
If you have not come across:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
would be of help.
Regards,
Manjusha.

Problem in message mapping file to xml

Hi all,
I´m new to XI and need to do a mapping from a file like structure to a nested xml structure.
The weblog (splitbyvalue----
>formatbyexample->
......................................................Constant(1)----
>equalsS->createif->tk
Is that right?
How can I map for ? I don´t get the correct itens to the correct tk...
Thanks,
Marco Galhardi.

Sorry,
I´ve only written a model like in Integration Builder Design Message Mapping.
Here is the expected xml result:
Thanks again

Single Line Data Type to Collection Data type, Problem in Message mapping

I have a csv file, the file has the following lines
hdr1
line1
line2
lineN
hdr2
line1
lineN
I want it to map it to an object with the ff structure
root object 1..1
object 1..1
subobject 0...n
hdr 1..1
line 1...n
How is the mapping of the said data types? Is it possible? Please help....thanks in advance

Hi Raymond,
as you have two different strutures:
- HEAD
- ITEM
and the occurences of the structures are not fix (say: e.g. HEADER occurs always 3 times), you need a key-field, which identifies each row as HEAR or ITEM.
If you do not have a key-field, you must design a "generic structure" that fits to both:
HEAD & ITEM. After the conten-conversion into this generic structure you need a message-mapping that identifies your HEADs and ITEMs.
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards Mario

Problem in message mapping due to file sender content conversion

Similar Messages

Maybe you are looking for