Problem in number range - TX.1-spot forward transaction

While creating spot/forward transaction in TX.1, I have found the following error message:               
1     "Number Range does not exist"          
     I left the field " External Number assignment - Trans" in TX.1 is blank          
     For information, I've set the configuration for number range in IMG as follow:          
     -"number range for each transaction type" is blank          
     - number range interval for financial transaction for each company code is 'unthick' for field Ext.number range          
2     " Number range 01 does not exist"          
     For information, I've set the configuration for number range in IMG as follow:          
     - I changed the configuration with put number 01 for number range setting for each transaction type.          
     - for number range interval for company code is remain the same.          
why the above error is occurred?               
How the number ranges configuration should be?               
Kindly advice me               
Thank you in advance

Hi,
You can make use of exit userexit_number_range  inside RV60AFZZ.
Regards,
Babul.

Similar Messages

  • Problem in Number range tranfer-OBH2

    Dear Gurus,
    I have  a problem in number Range of OBH2- tanfer
    i given company code and number range and specified the fiscal year and target year.
    But system showing  List contains no data.
    Help me where i can check, anything i missed.
    Regards
    sreenivas.P

    Hai Sree,
    While copying the no ranges from target company code first u can check the whether no ranges are there or not then copy the no ranges
    Regards
    Madhu I

  • Problem in number range assignment to equipment category

    Hi Gurus,
    I have created equipment categories & now want to maintain no. range for them. But by mistake i have assigned the categories to standard no. range group (PM) .Now i want to reverse it by deassigning to its original place.Please suggest me the way how i can do it so that i can create a new no. range group & assign equipment categories there.
    Also to activate the check box for external number range i am not able to activate or deactivate the check box.Please suggest for this problem also.
    Regards,
    Vivek

    Dear,
    For deassigning to it's orignal place
    Select the category
    Press the select element or F2
    Select the Not Assignt (at bottom of the screen)
    Press the Element/Group or F5
    For creating a new no. range
    Select Group at Menu Bar
    Select Insert
    Now give he Text and give the no. range
    u can not activate or deactivate External check box. See there are two lines if u want to give external no. range then assign the no. range at second line where external no. range check box is already activated.
    Regards
    Sunil

  • Problem in number range assignment

    Hi All,
    we have requirement to create a number range object(SNRO). Using FM NUMBER_GET_NEXT creating numbers.
    Here i am facing problem, when  i  am executing FM directly it is getting next number. But it is not updating it as current number in number range object(SNRO). Sometimes i see it skip 5 number in between n update as current number(not in the sequence)
    if anybody worked on similor case, please revert bask when you find the time.
    Thanks,
    Madhavi
    Edited by: kishan P on Nov 23, 2010 2:22 PM

    It looks like buffer issue of number range.
    Do as following to come out form the problem.
    Goto SNRO and Enter the Number range name
    Click on Change.
    Then form Menu-> EDIT ->Buffering -> Select No Buffering..
    Also remove the number in buffer to 0 which is 10 by default.
    Save and Try now..

  • Problem of number range object

    hi experts,
       the user use PA40 to record events and create an employee, the user wants the system to warn if the total number of employee beyond limits.
      so i found an exit 'PBAS0001' and implements it, if the total number beyonds limits, and popup to warn user and exit. But the number of employee is got from the number range object. when the program runs to the PBAS0001, the number range object has already add one, and next time when employee created, the employee number wouldn't be continuous.
      if the employee number must be continuous, so how to solve this problem? or is there other exit fm runs before the number range object adds? i found an exit named HRBAS00_STRUAUTH runs befor the range object but the necessary parameter is not all ready.
      hunger for your advices, and thanks a lot.

    hi,
    please describe in a more detailed way ....
    when you start the transaction the numer is for examle 2000 you save the employee. And now you start your transaction again which number is shown now ?
    regards

  • Problem in  Number range Interval in VF02

    Hi All,
         I am using Number range USEREXIT for invoice creation- VF01.
    So, while creating invoice, userexit will trigger, as per our logic provided,system generating numbers as expected.- which is working fine.
    Where as, in VF02, transaction , i was trying to release invoice to Accounting,
    system prompts with the below error message.
    Fyi, in my invoice doc type: Number range- interval-19, which has numbers mentioned in the error message below:
    am expecting, that when i release invoice to accounting from VF02 transaction, system triggering number range from invoice doc type,- But I dont understand, why it is triggering number range interval again, for which number is already createed in VF01
    Error Message:
    Incorrect doc.no.: 9003000002. Select document number between 0090000000 and 0094999999
    Can someone, have any inputs??
    Thanks in advance

    Hi,
    You can make use of exit userexit_number_range  inside RV60AFZZ.
    Regards,
    Babul.

  • Facing problem in Number Range Allocation for Objects in OM

    Hello Friends,
    I have couple of questions in setting number range for Objects OM :
    1) Can we set one single number range for the objects in all planned versions or do we need to set different number ranges for varous planned versions?
    2) If we are already using existing Internal Number Range in $$$$ for Objects in OM, how do we set number range External Number range to use it for forthcoming object creation?
    3) If we set the External Number Range, will the system use the set num range combinedly for all object types or individually for each object type (Ex: If we have an external  num range 100~200, then while creating Org Unit the system may take 100 after that if we try to create another Org Unit the system may take 101 in seqeuence. After creating these two Org Units, if we try create an Position object will the system start allocating the number from 102 or will it again start from 100)
    4) Can we default number ranges for various Object Types Planned version wise? If YES, what feature is used to default this number range?
    Regards
    Tharak

    Hi,
    For 1). Yes you can set number ranges for all plan versions.
    2. You can devide like this.
    IN - 00000001 to 49999999 
    EX - 50000000 to 99999999  - EXT.
    3. In my view it is applicable to all Objects.
    4. Don't know.
    Reward me if helps.
    Thanks,
    vasu.

  • Problem in Number Range - object RF_BELEG

    Hi,
    i Have error that    ....... For object RF_BELEG XXXX, number range interval 50 does not exist FBN1
    i have gone to FBN1 and even SNRO and gave this object.
    Number is already maintained there for 2010 for interval 50 but system still showing me error.
    Help Me !
    Regards,
    Pardeep Malik

    check fiscal year.  sometimes 2010 yr is defined s 2011.

  • Problem in Number range

    Dear experts,
    in FBN1, I have to delete a number range which is from 1 to 9999999999 ( complete range) and i am unable to create another range if i want to, as it is overlaping. 
    with best regards
    vk

    hi
    if it is in IDes
    goto FBN1 and click on status make the current number to 0 and then delete the desired number range.
    regards

  • Problem--Define number range for cProjects projects

    Hi,
    Does anybody knows how to define/create number range for projects in cProjects?.
    In the standard cPrjects frontend system, the system is taking 16 digits number automatically so i want to define my own number range as required by the client.
    Hence please let me know if some knows abt how to define number ranges for projects in cProjects system.
    You can also reach me on [email protected]
    Thanking you,
    Cheers,
    Suresh Nagaraja

    Hi Suresh,
    don't think there is a standard functionality for this. But you could create your own number range object and fill the data via BAdi. Try DPR_ATTRIBUTES.
    Cheers
    Thorsten

  • Number range for document created through transaction MR11

    Hi All
    I am using transaction MR11(Maintain GR/IR clearing account).I want to know where we configure the number range for the document which gets created on posting through transaction MR11.

    HI,
    SPRO --> MM -->LIV --> Clearing Account Mainteance --> Maintain Number assignment for Account Maintenance Document --> Maintain Number Range for Account Maintenance Document - Tcode - OMRJ or check in OMR4
    Regards
    KK
    Edited by: Kishore Kumar Galla on Mar 24, 2010 3:30 PM

  • FBN1 problem (document number ranges)

    Dear Friends,
    When i use tcode FBN1 i get message as "You are not authorized to use this function". Now i checked SU53 where i get message "The last authorization check was successful". Can you tell me what to do ahead. This problem is in development server. But i have complete authorisation in development server. Thanks. Further i can operate FBN1 properly in production server.
    Thanks - Keetu

    Hi
    When u run the t.code in developement server the system show the message , you are not authorized for this transaction , dear u simply ask your bassi consultant, plase authozed me, not going to other way
    its a 2 minut job for Basis consultant
    Regards
    Roobal

  • Business Object for spot/forward transaction - TX01

    Hi All,
      My requriement is to implement workflow for the transaction TX01. I can't able to findout Business Object for this transaction. Has anyone had experiences about  this transaction. Can any one help me on this.
    Thanks - Krish

    Hi,
    Then in T.code SWEC, you can configure for the Event.
    For this you need the BO to configure, Search the BO first in Forum & SAP Help.
    Once BO found, you can trigger the event via CDHDR config.
    Refer this [Link|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80ddeba4-e780-2b10-7bb2-fc7a33efabbd] for CDHDR config.
    Regards,
    Surjith

  • Number Range issues with sales orders in CRM and R/3

    Hi,
    We are currently using CRM4.0. I have sales orders created in R/3 and they are replicated into CRM.  These sales orders can only be created in R/3.  I have given them a number range of 0000000001 and 0005899999, however we have reached the number 0005899999 so we increased the internal number range for the sales orders in R/3 to 0009499999, however we forgot to update the number range for the corresponding sales transaction type in CRM so we are getting the following error in CRM:
    +Enter a business transaction number between 0000000001 and 0005899999
    Message no. CRM_ORDERADM_H532
    Diagnosis
    You have attempted to enter a transaction number which is not allowed for the transaction type.
    Procedure
    Enter a number between  &1 and &2. Make sure that you issue a number which has not already been issued.+
    We have now updated the CRM number range to match that in R/3 to 0000000001 and 0009499999 but we are still getting the error above on our existing sales orders in CRM.  I thought that increasing this number range it will remove the error but when I open sales orders in CRM the error is still there. 
    Is there any way to remove this error message?  Any tips or advice would be much appreciated.
    Please note we've already checked the post Re: Number Range Problem and note 427289.
    Kind Regards
    JoJo

    Hi Sirisha,
    The solution depends on the exact issue you are facing.
    The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
    If this is the case, then you can follow the steps below:
    1. Find the Message ID and Message No for the error message
    2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
    Let me know if this is not the issue you are facing.
    Regards,
    Nelson

  • Number ranges are in the Inactive mode.

    Hi friends,
    I am getting a problem with number ranges. When I am at Number ranges screen the options display only in active mode. change intervals and enter intervals are not in the active mode. How can I set this number ranges to be active and can be used. The same problem I am facing with the document number ranges. Please anybody help me in this regard. Thank you in-advance

    Hello,
    It would be authorisation issue. please use TCode SU22 and find if you have authorisation for object "S_NUMBER"
    Regards
    Lavanya

Maybe you are looking for