Problem in opening a query in BEX analyzer..

i am using front end sap gui 7.20 with patch 9..
my issue is that when i tried to open a query in bex analayzer. i get following error stating that
you donot have suffiecent authorizations for the infoprovider XXXXXX
function module /SDF/AL_MAP_TRANSID_LOGH does not exist
and i tried to open a query from bex query designer ..i am not able execute it
and i get strange error while executing tcode rrmx..the status error states that microsoft excel is not installed, install microsoft excel viewer
after installing microsoft excel viewer also..i get the same error...
pls suggest asap guys

Hi Satish,
You can ask yur tech support team to install sap gui and in specify them to tick "SAP BW add ons".
also Enable the macros for the analyser.
Regards
Rahul

Similar Messages

  • Problem opening a query in BEx Analyzer 7.10

    Hello,
    we have problems with the BEx Analyzer, an empty screen is
    displayed when we open a query.
    I'm going to explain the steps:
    We open Analyzer, goto open query, logon into BW window appears and then, before the screen to select query from an Infoarea, roles, etc is load, the Analyzer seems to open the SAP Logon and an empty screen from R/3 appears.
    We can not close this R/3 empty window, only when we close the Analyzer this windows is closed.
    The problem happens with the SAP GUI 6.40, so we updated to
    SAP GUI 7.10, installed patches, addons and windows/ office
    patches but the problem persists.
    How can we solve this issue?
    Thanks in advanced.
    Best regards,

    Yes, I have done all the installations that the notes said and the pre-requisites:
    - Microsoft .NET Framework 1.1 + .NET Framework 1.1 SP1 + Hotfixes and windows update + Microsoft Visual J# .NET Framework 1.1.
    - Microsoft .NET Framework 2.0 + .NET Framework 2.0 SP1 + Hotfixes and windows update + Microsoft Visual J# .NET Framework 2.0.
    - Microsoft Officce 2003 patches (KB907417, KB945185) + Office 2003 SP3
    - bi710sp03_300 and bi710sp04_400
    - gui710_6-10002995.exe and kw710_1-10004321.exe
    But the problem persist.
    I have executed BI Frontend installation check tool (sapbexc710.xla) and seems everything is OK.
    Regards,

  • Authorization issue while opening the query in Bex Analyzer

    Hi All,
    I get the below error mesage while executing a report.I have executed the same query in RSRT and i get the below message.
    I have created some roles and added to a test user for testing purpose and when i log in as a tets user i get the below meesage.
    I am not sure what i am missing in the roles.When i tried executing the query in my id then no issues.
    No authority for the node from characteristic 0EMPLOYEE__0MAST_CCTR, hier
    Your user master record is not sufficiently maintained for object Authori
    Kindly let me how to overcome this.
    Thanks in advance.
    Regards,
    Kumar

    Hi Harish,
    Just check this query by this way:
    Use Tcode RSECADMIN -> Analysis ->Execution as -> In Execute as user: Put your Test user Id also tick With log and select RSRT. Now use Start Transaction.
    Might be the chance to get more details about this issue for resolution.
    Also ensure, Have you did the User Comparison while assigning test user id in role?
    Regards,
    Abdullah

  • Error in running query in Bex Analyzer

    Hi All,
    I faced some problem in running the query in Bex Analyzer, when I run
    the query in the Bex Analyzer, there are error messages indicates that
    the query is fail to load. Before that all the query can be run without any problem.
    The details for one of the error msg are as follows:
    <b>Diagnosis
    Variable 0P_MATBK has the processing type "Manual Input/Default Value".
    However, it is not input ready, and no default value has been specified.
    System Response
    Procedure
    Make the variable input ready or specify a default value.
    Procedure for System Administration</b>
    Any1 can help? Thanks.

    Take a look at this link...
    http://help.sap.com/saphelp_nw04/helpdata/en/55/589b3c494d8e15e10000000a114084/content.htm
    For the variable wizard...
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/content.htm
    To make it Ready for Input...
    In the variable properties window, Check "Ready for Input".
    Message was edited by:
            Jerome

  • Error Message while opening workbook or Query in BEx Analyzer

    Hi all,
    Whenever I try to open any workbook or query using Bex Analyzer I get an error message saying "Serious error occured while reading history folder" Message class RSOBJS, number 170. But this doesnt stop me from opening the workbook or the query.
    Kindly help me to suppress or eliminate this message. I am not able to find this message in the list of messages available in RSRT either.
    Thanks and Regards
    Mui Kanva

    Hi Mui Kanva,
    Does your problem occur in a copied system?
    I have same problem in our Quality-BW (copied from productive system). WE are in our QBW not able to activate personalization correct and get the same error messages. I suggest the reason in the fact, that the source-system Myself (QBW) does not work correct. This reason causes that export data sources could not be activated via RFC-Connection.
    Please check to activate your source system?
    We accept the error messages in our QBW and did not activate the RFC connection.
    Regards
    Andreas

  • Unable to open Query in Bex Analyzer

    Hi All,
    I am unable to open query in BEx Analyzer though i am able to open it in RSRT.It gives me no error,as soon as i open query it shows processing then nothing happens.No selection screen nothing,no error also.
    Any pop up something like that  which is blocking the execution of Query??And its in production system,so its pretty urgent.

    Hi,
    RSRT works while Analyzer doesn't. I would check it from the authorizations/roles point of view.
    Some time ago I saw similiar error - due to lack of some rights the user was unable to run a query.
    After I looked into the data provider definition I saw nothing there. My (admin) rights were good enough to run the query and see the data.
    The user had no rights to read some infoprovider data. After granting the rights he could run the query.
    Regards. Leszek

  • Error when opening query in BEx Analyzer BI7

    Hi all,
    I get the following error when I open a query in the Analyzer.
    <b>Unable to convert character set 4103 to character set 4103. possible.</b>
    Afterwards it closes the connection.
    Any help will be appreciated.
    Cheers,
    Meurant.

    Hi Meurant,
    Most likely it is a mismatch between your Client GUI and sever.eps
    The following steps helped in some cases.
    1) Uninstall the SAP GUI on your m/c.
    2) Upgrade all you operating system patches to the required level...If it's Windows XP.....just
         get the latest updates from Microsoft.
    3) Re-install  GUI for  7.0
    Good luck, BB

  • BW Server Error when running Query in BEx Analyzer

    Hi All,
    We are currently trying to run a custom Consolidation query in Bex Analyzer but coming across this error below.
    We are on BI 7.0 (SAP NetWeaver 2004s), BEx Analyzer 2004s Release, Support Pack 9, Patch 4, Revision 372.
    This error message is only occuring for certain custom consolidation queries and not all and does not occur for standard queries.
    Does anyone have any advice?
    Cheers,
    Wiki
    <b>ERROR MESSAGE</b>
    Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02-(see long...)
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

    Hi Wiki,
    I am running into this error also. You marked the question as answered, did you apply the notes or did you find any alternate solutions?
    Thanks,
    Vedant

  • Iam Facing an error whenever i run a query in Bex Analyzer

    Hi All,
    Whenever i run the query in bex Analyzer iam facing an error as
      *Error reading the data of infoprovider*
      *Error in BW :error creating Index*
      *Enter an rfc destination*
    *The following error occured during parallel processing of query 67.*  Please anyone help me on this.
    Thanks & Regards
    Sameer Khan

    Hi Sameer,
    There could be several reasons for this error. Based on the first message you got
    *Error reading the data of infoprovider*
    Please check that you have the requisite authorizations to execute queries on this infoprovider
    Naresh

  • Problem in opening BI Query in Portal

    Hii Expert,
    i have designed a BI query which is running fine in BEX analyzer and showing right result , but it is showing error when i try it to open on Portal and showing Error like:
    -> Fiscal year variant P3 not expected
    ->Variable 0FYEAR could not be replaced.
    ->Variables for data provider  contain invalid values
    ->     Processing is not possible
    Regards
    Prakash Kumar

    Hello,
    I have seen this problem before where the corrections from the following notes were missing:
    1411933 Incorrect data under special circumstances
    1470258 Incorrect data in query with time-dependent hierarchy
    Please check that these nots have been applied in your system.
    Please note as well that the variable cannot be replaced if query isn't restricted on a fiscal year variant.
    If you would like to use the variable 0FYEAR the fiscal year variant must be in the filter of the query, that is
    valid for the whole query. Otherwise the period can't be found, check note 141842.
    Kind Regards,
    Des

  • Problems with dynamic data slices and BEx Analyzer

    Hello experts,
    we use a data slice to lock released data.
    This data slice contains an exit-variable which selects all plan that are already released out of a ABAP dictionary table.
    The user can release data via planning function. He can start this function with a button in a BEx workbook.
    He use the same workbook for insert planning data.
    the problem is:
    when a user releases data, the value of the exit variable in our data slice changes but the data slice 9999 seems to be NOT generated with the new value. the reuslt is, that the user can still change released data.
    the data slice is just new generated after logout and login again not after refresh the query.
    Is there a possibility to force the system to generate data slice 9999 with the actual value of the exit variable? maybe a function module or method?
    We have this problem just in BEx Analyzer. In Web Reporting everything works fine and the data is locked by the data slice after refresh.
    Thank you
    Johannes

    Hallo Johannes,
    if you want to have this kind of behaviour you need to go for a data slice of type exit. You will find some information about this in the Planning forum.
    The data slice is instantiated once, but when you release the data you need to call a method in your exit data slice which rereads the values. This is a rough idea how this could be done.
    Regards Matthias Nutt
    SAP Consulting Switzerland

  • RFC_ERROR_COMMUNICATION error while opening the query in BEx

    I am able to open the query through rsrt tcode. But If I try opening the query or create a new query from BEx analyser, I get the
    below error.Please help.
    Error Group
    RFC_ERROR_COMMUNICATION
    Message
    SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
    Connect_PM  GWHOST=/H/sapgate1.wdf.sap.corp/S/3299/H/iwdf1081, GWSERV=sapgw00, SYSNR=00
    LOCATION    SapRouter on sapgate1
    ERROR       sapgate1: route permission denied (172.16.25.105 to iwdf1081,
                3300)
    TIME        Tue Sep  8 12:46:54 2009
    RELEASE     46D
    COMPONENT   NI (network interface)
    VERSION     34
    RC          -94
    COUNTER     134420

    http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417700)ID0639339950DB00540967214800578770End?rid=/library/uuid/4e515a43-0e01-0010-2da1-9bcc452c280b&overridelayout=true
    please go through the PDF doc. it would be more helpful to you.

  • Infoset query in BEx analyzer

    Hello,
    we have a query on an infoset based on an infocube and infoobject. When running the query directly in web, the data is shown. When we run the query in BEx, we get "No applicable data found" . Is there some setting we forgot or are there issues with Infosets and BEx?
    Thanks!

    Hello,
    Try to run the query with transaction RSRT2.
    Probably youwill experiencing the same message error.
    Porbably you are using different users, with different roles/authorization.
    Associate SAP_ALL and BI_ALL for the affected user. If works, there is something wrong with the user's roles.
    If the issue remains, open a message to BW-BEX-OT-OLAP component.
    Best regards,
    Edward John

  • Unable to access query in Bex Analyzer

    Dear All,
    Could you please help us as we are getting No authorization error in Bex Analyzer when we are trying to view the query. We can access the query in RSRT using USERID for Execute as others. When we try the same query and with same userID in Bex Analyzer we are getting the error No authorization. We are on BI 7.3. Please let me know in case you need more information
    Thanks and Regards,
    Jyoti Arya

    Hi,
    please get required approrvals from client or business team.
    Later seek basis or security team help to get required authorizations.
    Thanks

  • CL_RSR_REQUEST eror while running the Query in Bex Analyzer

    Hi All,
    I have created the Query and assigned it to the role by using PFCG and also by Query Designer. when the user executing this query using the Bex Analyzer he is getting this error.
    CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl"
    Your input is appreciated
    Thanks in Advance
    Regards

    Hi all,
    I had assigned the query only to the role. when i checked with user id i found error.
    You do not have the authorization for component ZMM_PO_Q1_2
        Message no. BRAIN800
    Diagnosis
         You do not have the authorization for the selected component.
    System response
         The selected component cannot be edited.
    Procedure
         lease speak to the person responsible for authorization, if you
         authorization for the editing of this component. The function is
         protected by the object "Business Explorer - components" with th
         following fields:
             -  InfoCube                ZMM_POD
    Type of a component     REP
    Component               ZMM_PO_Q1_2
    Activity                16
    for this what i have to do .. i had also checked in the su 53 t code.i showing the previous authorization is successfulll..
    regards

Maybe you are looking for

  • Is it possible to set a default Calendar in iCal?

    I use a calender that is served by Kerio. I want to set that as the default, so that when I create a new entry (as in Apple-N) it uses the set calendar, and not the first one in the list in iCal, which is a local file. I cannot delete the local ical

  • Self-coping row in matrix

    Hey All I hava problem with AddRow to Matrix because after add row to Matrix, added row is copy of previous I use this code: Matryca.AddRow(1, -1) Matryca.Columns.Item(1).Cells.Item(i + 1).Click SAPbouiCOM.BoCellClickType.ct_Regular) Thanks very much

  • Purchase Requistion List by total value

    Hi All Is there a report that shows  total value of all items in a Purchase requisiton by number Vishnu

  • I am unable to install iTunes on my new HP laptop.

    I have tried several times to install iTunes on my new HP Pavillion dv7.  Each time I get a Windows installer error message,   Is anyone else having the problem. My next step is to take the Laptop back to BestBuy and have the Geeks check it out. 

  • Trying to install internet camera thru Windows XP within Parallels

    I recently purchased a Panasonic KX-HCM250 wireless internet camera and am trying to configure it using my Mac Book Pro thru Windows XP running within Parallels. I managed to get the camera to show the video images thru the internet using the provide