Problem in project admin

Hi all,
I created a project and assin to logical Compontent then i created a IMG project.
Steps:
1.solar_project_admin
2.system landscape
3.IMG project
4.save
Problem:
Status was green but "view" was RED(how to make it gray)
Regards,
Neni

Hi Neni,
you can get it "gray" by downgrading your satellite system
Your goal could be to get it green. To do so you need to create a view for the IMG project ("create view" button). But this is not needed.
You could just let it be red.
Regards

Similar Messages

Project Admin & Contributor cource code access control

I am setting up access control on a TFS 2013.2 TFSVC project
To deny access by default I added the Contributors group in the root of the source tree and set all permissions to deny, then on individual source folders I set the permissions for specific groups. So far so good, members of those groups can see the code
I want them too and only that code.
The problem is for project admins.
All teams are members of the contributors group so that they get team functionality such as team email alerts. If someone in the Project Admin VSO group is added to a team they therefore become part of the contributors group due to inheritence and their
code access to the top of the source tree is denied by default.
Is it so that project admins canot be members of teams? This would be a problem because often the project admins also are the leads who define and administer the teams in TFS. If no-one is able to see the top of the source tree, whould be able to create
a new sub-folder?

Hi QualityJanitor,
Thanks for your reply.
In your scenario, if you add the team project admin user in team group, he can view the source structure in Source Control Explorer, but he cannot open any file to read. He can create new sub-folder in Source Control Explorer, but he cannot check-in this
sub-folder.
We suggest you create a custom team group in your team project, and add all the users(which you want deny the code access by default, exclude team project admin) in this custom group, then use this custom group instead of Contributors group in the root of
source tree, and set all permission to deny for this custom group.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problems using projects created in older versions of iMovie

I have a few projects created in older versions of iMovie, as far back as version 2 as well as more recent versions. Most of those projects are finished and I want to burn them to DVD again, but a couple of them could bear a little touch up editing. These projects are precious movies of our kids and hard to replace. Although I could probably find the original video, I put many hours of work into creating these projects.
In any case, when I open up an old project, I get a warning that goes something like this: "The project was saved with an older version of iMovie. Opening it in this version will cause it to be upgraded, which will make it unreadable by older versions. Are you sure you want to open it?"
I clicked okay, thinking "sure, I don't need to play it in an older version. I have iMovie HD."
However, now when I play my old iMovie project, there are a few problems. For example, one original movie's title was over black. When I play the movie, I get a completely white screen and no title. Also, in another movie, when viewing the movie in full screen, the transitions were replaced by a black screen (although the transitions were there when I viewed the movie in the iMovie window). Basically, there are problems cropping up here and there.
I need to do some more experimenting with all this to more fully understand how many problems there are. I don't know if the projects I opened in iMovie HD are now "broken" since I "upgraded" them with iMovie HD (when prompted to save the project's changes when quitting, I said NO, don't save changes).
I don't know if I should use older versions of iMovie to view and burn to DVD these projects. (I still have iMovie 2 and 3, but not 4 or 5. I don't know if older versions would even work on my Quad G5 with OS 10.4.7.) I also don't know if the older versions of iMovie would work with the current version of iDVD. How can I tell which version of iMovie was originally used for a given project? How can I find iMovie 4 or 5 if I need it?
I also wonder if projects I make with iMovie HD can be opened by future versions of iMovie, or if I should export them as Quicktime or something to be safe.
As I start to look into this further, I would appreciate any comments, suggestions, and experiences that you may be able to offer. I need to get these movies back to their former selves, when they looked good!
Message was edited by: Anthony M Kassir MD

(when prompted to save the project's changes when
quitting, I said NO, don't save changes).
Excellent! That should leave you in pretty good shape. More below.
I don't know if I should use older versions of iMovie
to view and burn to DVD these projects. (I still have
iMovie 2 and 3, but not 4 or 5. I don't know if older
versions would even work on my Quad G5 with OS
10.4.7.)
The old versions of iMovie will run just fine in today's OSX. (But not iMovie 2 if it was the version that ran in Classic instead of Mac OSX.)
I run versions 2,3,4,5 and 6 today. Problems are minimal.
I also don't know if the older versions of
iMovie would work with the current version of iDVD.
That's not a problem unless your old iMovie projects contain chapters. If you tell iMovie 3 to create a new iDVD project, it might not work. You might not be able to transfer the chapter information to the newer version of iDVD.
(I just tested iMovie 3 to iDVD 6 and everything worked just fine.)
Except for iMovie 2, all old versions of iMovie stored a small QuickTime reference movie in the project folder. If you can't get an old version of iMovie to play nice with iDVD, drag that movie into the iDVD window.
How can I tell which version of iMovie was originally
used for a given project?
Drop the project file (discussed below) onto the TextEdit icon in the Dock. The version of iMovie that last saved the project is shown in the first few lines of the project file.
iMovie 5 used an entirely different project file format, the pList format. The top of the project file will look like this in TextEdit:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
How can I find iMovie 4 or
5 if I need it?
eBay?
I also wonder if projects I make with iMovie HD can
be opened by future versions of iMovie, or if I
should export them as Quicktime or something to be
safe.
We can never assume any new version of iMovie will be able to understand all features of a older project. It's always smart to make a backup.
There can be problems Apple can't anticipate. There may be third-party software used to create titles, transitions and special effects, plug-ins not installed with the new version or (more often, incompatible). The fonts installed on our Mac may have changed too. There's lots of features that can't be anticipated. I've never had a problem converting projects, but I never use third-party add-ons and special fonts.
As I start to look into this further, I would
appreciate any comments, suggestions, and experiences
that you may be able to offer. I need to get these
movies back to their former selves, when they looked
good!
My guess is it should be possible to restore the projects back to their original state.
Note that when imovie 5/6 converts an older project, it does NOT create a true iMovie HD project. Instead of creating an iMovie package, it retains the project FOLDER format. It places new iMovie HD elements inside the old project folder instead of converting it to a package.
When converting the project it changes the old project file name to "Sample Project Name.iMovie2Project", then creates a NEW project file with the plist format, having the name "Sample Project Name.iMovieProj". (There may NOT be the .iMovieProj extension.) When you save the new project, it adds a new project file "Sample Project Name.~iMovieProj". Note the tilde. The tilde file is a backup of the project file as it was when last saved in iMovie HD.
For our purposes, ignore the iMovie HD project files. We'll use the file ".iMovie2Project" to restore the project. (The extension is the same for all old versions of iMovie, not just iMovie 2.)
• In the Finder, Duplicate the entire project folder. Work on the copy.
• Open the project folder in the Finder.
• Discard the "Cache" folder, the "Shared Movies" folder, the "Audio Waveforms" folder and the two iMovie HD project files. (Some of those items may not yet exist yet because you didn't save the converted project.)
• Drop the "Sample Project Name.iMovie2Project" file onto the TextEdit icon in the Dock to get the version. Close it.
• Remove the ".iMovie2Project" extension, if you want.
• Launch that version of iMovie. Drop the "Sample Project Name.iMovie2Project" file icon on the iMovie icon in the Dock. With luck, the project should open normally. It's possible any third-party plug-ins used to create the project may not be available. If they aren't available, there might still be problems.
• Move your unconverted projects to folders that say which version of iMovie created them. To open them in the future, drop the project icon on the appropriate version of iMovie.
If all this fails, there is another way to do the editing you want. That is to import the project.mov file that's inside the converted project folder to a new iMovie HD project. That will deliver the video and audio of the original project as a single clip. Use that to re-edit the project. The name of the movie is "Sample Project Name.mov".
(The movie is a QuickTime reference movie, with no video and audio of its own, just pointers to the files in the Media folder. So long as the Media folder hasn't changed, it can play the original project as last saved.)
Importing the project.mov won't work with iMovie 2 projects, however, for iMovie 2 didn't store a project.mov file in the project folder.
Even if you end up importing the project.mov, you still may want to "unconvert" the project as described above.
Hope I haven't skipped a step. Let me know if you bump your head on something.
Karl

HT204370 I downloaded an HD movie onto my laptop from i-tunes. It plays fine on my laptop, but when I plug in my HD projector, the movie quits. When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes mov

I downloaded an HD movie onto my laptop from i-tunes. It plays fine on my laptop, but when I plug in my HD projector, the movie quits. When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes movie before this. Someone told me that i-tunes changed something so that movies can no longer be projected. We have a home theatre and have watched movies this way quite regularly, so it would be a drag if Apple will prevent us from doing this in the future.

I don’t know about projection, but I’m unable to watch HD content in iTunes because my Apple 30-inch Cinema Display is not HDCP-compliant (which is part of an HD copy-protection scheme).
The other movies you’ve projected, were they HD as well? If not, it could be the same problem: your projector is not HDCP-compliant.

Problem in Project progress

Hi,
I am facing problem in Project progress report CNE5.
System is calculated 300 % poc in Adjusted aggregated actual POC & Aggregated actual POC field only after full confirmed the activity (Degree of Processing is showing in report as 100%).
If I confirmed 50 % then system is showing above value 0% .
Also while CNE1 system is taking default method as :SAP 0-100, so i changed it into activity by 00006 (Work) then system calculate the Progress but only after full confirmation, but again it is 300%. which should not.
The configuration settings are as
1. Progress Version: -
Progress Version : 100
Plan Version          : 0
EV Basis                 : 1 ( Cost Plan)
POC weighting      : 4 Work, Basic ( Active Project)
2. Group of Progress version:-
Controlling Area & 1
3. Assign Progress Versions to Group Progress Versions:-
Controlling Area, 100 & 1
4. Define Statistical Key Figure for Percentage of Completion:-
                                                 Usage               SKF (with unit of measurement= %)
       Controlling area                   1 10
       Controlling area                    2 20
       Controlling area                    3 30
5. Define Measurement Methods:-
Measurement method :0000000006 (Work)
Meas. technique : E ( Degree of Processing)
Max POC                : 100
6. Define Measurement Method as Default Value
Progress version(100), Object Type (2:Activity, Internal Processing), Plan/ Actual( 1 &2 :both), Method (00000006 :Work)
7.Maintain Assignment of Cost Element Group
Cost element (PS) , Default selection( Yes) & cost element group(PS_PROP)
I hope above information is sufficient.
My problem is system is calculating poc only after full confirmation but i want at partial confirmation. Also after full confirmation poc is showing 300% which i want 100%.
Regards,
AVI

Hi Experts,
I am waiting for your valuable inputs.
Regards,
AVI

Capacity check problem in Project system

hi,
i have some questions for the Capacity check problems in Project System.
1. if one Person is assigned to diffierent Work Centers, for example, person A is assigned to Work Center 01 under Plant 01, and Work Center 02 under Plant 02, how can i do the Capacity check?
if i want to use A of Work Center 01 in the Project, the System will only check the Capacity of 01, or both of 01 and 02?
2. What is the Pooled Capacity?
Rgds,
Liang

hi,
1.Capacity check takes place at plant level itself..
2.Pooled capacity:- This is created separately in [u wil find in PP] and this capacity can be used by different work centers.
regards
pushpa

Problems opening project if I 'log on' with new id

Someone told me that my problem may be fixed if I logged on as a new user. I assume because they thought the problem might go away if I did so. But now when I'm logged on as a new user, I can't open the project. I get the forever beach ball???
Maybe I'm just not waiting long enough, but it seems to be crashing my system.
Any advice??
Bryce

The log in as a different user manuever is intended to determine if the FCP application itself , not any particular project, is at issue. This manuever involves only logging in as a different user and then starting FCP. If you get an un named project and normal start-up, that tells you at least that FCP is working OK. In turn that informs you that the preferences used as the "real" user may be the problem. If the project you are working on is not available to the "different" user and the different user tries to open it,an assignment that has to be made in advance of the switch, you could get a beachball and learn very little. You would have to make all components of the project(everything) available to the different user to try to start the project.
But the search for problems within projects are not revealed in this manuever.

10.1.3 - Compiler problem rebuilding projects

I found a problem compiling projects.
Until 10.1.2 when I compiled a project and I got some errors correct classes where compiled and stored, now only if all is correct compilation succeds and compiled classes are stored.
Is it possible to avoid that odd behaviour ?
Tks
Tullio

Cannot confirm your observation.
I believe it really depends on the location of the error.
With 9.0.5.2 (!), depending on the location of the error, the amount of class files written differs enormously. Sometimes, it seems all class files are written except the ones with error. Sometimes almost no class files make it to the disk.
If that's the odd behaviour you're talking about then this already existed in 9.0.5.2.
Sascha

Problems installing Project Server 2013 SP1

Hi,
I have an issue installing Project Server SP1 (KB2880553). The history of this installation is as follows below:
I have one App Server and one Web Server (test environment)
On February I installed the mistaken SharePoint 2013 SP1, Project Server SP1 and Language Pack SP1 in both servers, followed by SharePoint Config Wizard. No problem here, other than the mistaken SP1's
The current week I've installed SharePoint SP1 (KB2880552) in both servers, followed by SharePoint Config Wizard. No problem here.
Then I installed Project Server SP1 (KB2880553) in both servers, it got installed in both servers apparently, but when I run the SharePoint Config Wizard in the APP server I get the error below and I can't continue:
If I try to install Project Server SP1 in the Web Server it tells me that the product is alteady installed there, if I try to install the Language Pack SP1 KB2880554, it tells me that there is nothing to be installed in that Web server.
If I check the Patch Status in Central Admin, this is what I get regarding the Web server, the APP server is apparently ok:
So the problem is that I can do nothing, as it doesn't allow me to install anything anywhere.
Please, do you know what to do in this case?
Thank you for your help and regards,
José Espases

Hi,
thank you for your answer.
Maicco, I've already tried to follow the links but as I said initially there is nothing that I can install, as you can see in the second picture that I sent before, the KB2880553 is installed partially (last line) but missing/required in other lines, so
when I try to install it again it keeps saying that it has been already installed, but when I execute the Config Wizard it says that it is missing and required.
The Uninstallation/installation is what I try to avoid.
Raymundo, regarding the post http://www.maadarani.com/Blog/Lists/Posts/Post.aspx?ID=12&mobile=0 it
doesn't work, probably something is missing in the link, please, can you send it again?
Thank you and regards,
José Espases

Problem with project stock valuation class

Dear All,
We have an issue regarding the Revenue Inventory and Capital Inventory. There is a certain balance amount which should be in capital but system is showing in Revenue and vice versa.
The reason for this is that when the material was created, in some materials the main valuation class was 3032(Project) and in some it was maintained as 3030(revenue). But project stock valuation class was not maintained.
Now the problem persists in the G/L balances, the G/L of project stock (132006)displays some amount of revenue(132000) and vice versa.
We tried to maintain the project stock valuation class (3032) for materials for which the main valuation class is 3030 (Revenue),but still the G/L for revenue (132000) is getting hit.
At the end, the requirement is that G/L for revenue (132000) should hit when revenue procurement is there and G/L for capital (132006) should hit when capital procurement is there.
Kindly suggest the way forward.
Regards,
Harsh

Thanks Venkat, we have thought of the same as a last stop but there are hundreds of materials which has this problem and there would be many open documents for them.
If anything could be suggested other then this, and I wanted clarification on one more point that the materials for which main valuation class was 3030 and later we added 3032 in project stk Val class but after maintaining it. When we procure(Capital procurement), it is still showing the balance in G/L 132000(Revenue).
Regards,
Harsh

Problem with project after upgrading to 10.1 and moving libraties to external drive

I need to make some updates to a project I created over a year ago prior to upgrading to 10.1. Also since creating, I moved my Final Cut Libraries off to an external drive. The only about 25% of the clips in the project appear to be linked to the original media even though all appear to be in the Original Media folder. I have tried as a test to put the original video files into a folder outside of any FCP files and used that to use the "Relink Media" function under "Edit" The attached link to a pdf doc shows the error message I get. I have no idea how to proceed from here to recover this important project.
Running Yosemite
https://www.dropbox.com/sh/96zy244yeh3mjb7/AADGTQRjeJPBlRmQ4L5f9Xcna?dl=0

Russ
I copied the Original Media folder to a new location and then relinked to the new folder. The process ran without error. However that did not fix the problem. The clip content isn't there for 80% of the clips. The system was rendering in the background for hours. I went to bed. When I got up and checked using the view background tasks it stalled at some point. I tried exporting the XML and importing into a new library. I got a waring message about an unrecognized cross dissolve transition. When I opened the project in the new library the time line looked exactly the same and it behaved exactly as the original project. Thoughts?

Windows XP Pro - SWVMS 1.2.1 - Problems running as Admin

Hi there,
Installed a new version of SWVMS 1.2.1 and went through the initial prompts to enter new password. Loaded the tool, setup the cameras - then prompted me to change to Admin settings, in order to connect to cameras.
I noticed this error did not appear in 1.2.0.
Anyways, played around quite a lot with the settings, within XP (confirmed I AM administrator) - but some reason its not recognizing the credentials.
Also, tried to uninstall and reinstall app - but some registry files seem to stay there - and recognize old password and settings. Does anyone know where these are?
Any help is appreciated.
Zeeshan

Thanks Jeff. That finally worked!
I then ran into another problem - system would give me an error when inputting dyndns url. just would not accept it. So then added the internal LAN IP addresses, tested all the camera's, saved, exited the system. restarted the system, edited all the cameras with dyndns url - and poof! it worked!
Seems that there may be a bug in v1.2.1 - as it seems it wants to see the local IP on the camera when it first connects using SWVMS16, once you edit and add dyndns url - it seems to accept that change later on.
Zeeshan

Problems with project when switched from Labview 8.2.1 to Labview 10

Hi everyone,
I recently switched from Labview 8.2.1 to Labview 10.
Before I can run the project I get the error which you can see in the attachment.
(The project is running well in Labview 8.2.1)
I did already check if variables end with a space, but none of them are.
The variables are also without any slashes, so that couldn't be the problem either.
Does anybody has any idea what the problem can be, please let me know.
I hope to hear from some of you soon.
Regards,
Kenny
Attachments:
Error Labview 10.JPG ‏19 KB

Your other post in the other thread indicates you've looked at that thread. Based on that have you checked your variable names to see if any of them are multi-line? The error message is basically telling you that you have illegal characters. A carriage return (\r) or a new line (\n) is an illegal character.

Problems updating projects to new versions of Premiere (CS5 to CC and CC to CC 2014) Memory consumption during re-index and Offline MPEG Clips in CC 2014

I have 24GB of RAM in my 64 bit Windows 7 system running on RAID 5 with an i7 CPU.
A while ago I updated from Premiere CS5 to CC and then from Premiere CC to CC 2014. I updated all my then current projects to the new version as well.
Most of the projects contained 1080i 25fps (1080x1440 anamorphic) MPEG clips originally imported (captured from HDV tape) from a Sony HDV camera using Premiere CS5 or CC.
Memory consumption during re-indexing.
When updating projects I experienced frequent crashes going from CS5 to CC and later going from CC to CC 2014. Updating projects caused all clips in the project to be re-indexed. The crashes were due to the re-indexing process causing excessive RAM consumption and I had to re-open each project several times before the re-index would eventually complete successfully. This is despite using the setting to limit the RAM consumed by Premiere to much less than the 24GB RAM in my system.
I checked that clips played; there were no errors generated; no clips showed as Offline.
Some Clips now Offline:Importer CC 2014
Now, after some months editing one project I found some of the MPEG clips have been flagged as "Offline: Importer" and will not relink. The error reported is "An error occurred decompressing video or audio".
The same clips play perfectly well in, for example, Windows Media Player.
I still have the earlier Premiere CC and the project file and the clips that CC 2014 importer rejects are still OK in the Premiere CC version of the project.
It seems that the importer in CC 2014 has a bug that causes it to reject MPEG clips with which earlier versions of Premiere had no problem.
It's not the sort of problem expected with a premium product.
After this experience, I will not be updating premiere mid-project ever again.
How can I get these clips into CC 2014? I can't go back to the version of the project in Premiere CC without losing hours of work/edits in Premiere CC 2014.
Any help appreciated. Thanks.

To answer my own question: I could find no answer to this myself and, with there being no replies in this forum, I have resorted to re-capturing the affected HDV tapes from scratch.
Luckily, I still had my HDV camera and the source tapes and had not already used any of the clips that became Offline in Premiere Pro CC 2014.
It seems clear that the MPEG importer in Premiere Pro CC 2014 rejects clips that Premiere Pro CC once accepted. It's a pretty horrible bug that ought to be fixed. Whether Adobe have a workaround or at least know about this issue and are working on it is unknown.
It also seems clear that the clip re-indexing process that occurs when upgrading a project (from CS5 to CC and also from CC to CC 2014) has a bug which causes memory consumption to grow continuously while it runs. I have 24GB RAM in my system and regardless of the amount RAM I allocated to Premiere Pro, it would eventually crash. Fortunately on restarting Premiere Pro and re-loading the project, re-indexing would resume where it left off, and, depending on the size of the project (number of clips to be indexed), after many repeated crashes and restarts re-indexing would eventually complete and the project would be OK after that.
It also seems clear that Adobe support isn't the greatest at recognising and responding when there are technical issues, publishing "known issues" (I could find no Adobe reference to either of these issues) or publishing workarounds. I logged the re-index issue as a bug and had zero response. Surely I am not the only one who has experienced these particular issues?
This is very poor support for what is supposed to be a premium product.
Lesson learned: I won't be upgrading Premiere again mid project after these experiences.

Problem in Server Admin: cpu and network graphs not updated or empty after lion server update

Hi!
Just for archive purpouses because i've already solved that!
After upgrading from OSX Server 10.7 to 10.7.1 my CPU and Network graphs in Server Admin stop being updated.
In 24h the graphs where blank (disk usage graph seem to keep working).
First i read about "what is the application responsible for this"; it's called ServerPerfLog, and you can see if it's running that way:
     # ps ax | grep ServerPerf
If you don't see anything else than your own "grep", that means that no application is running, no data is being collected.
     41324 s000 R+     0:00.00 grep ServerPerf
A positive response for this (meaning that the service is running) should be something like that (2 lines: your grep and the service app itself):
     94   ?? Ss     0:04.71 /usr/libexec/ServerPerfLog
     41344 s000 R+     0:00.00 grep ServerPerf
Later i read about "where is the config file for this service app", and you can find it here:
     /System/Library/LaunchDaemons/com.apple.ServerPerfLog.plist
If you edit this config file, check that the "Key > Disabled" is set to "False"
     # vi /System/Library/LaunchDaemons/com.apple.ServerPerfLog.plist
        <key>Disabled</key>
        <false/>
After that, i try to launch the service that updates this graphs again, by hand, performing the following command:
     # sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.ServerPerfLog.plist
And the service got launch!!! yeeeepa!! i see a first update in graph data.
Also the "ps" query reply that the service was running!!
The bad things came a day after, when i saw that the graphs stop again....
I check if the service was running executing again the "ps" command, and that show me that the service was stopped again; no ServerPerfLog process was running.
But r e l a x, because the process hang because of a permissions problem.
You should know, I run "Repair permissions" within "Disk Utilities" over the running system disk, eeee... voila!
I hope that helps someone to get his fancy graphs back!
Regards,
t

You are God like!!! Wooo hooo! Thanks bud!

Problem in project admin

Similar Messages

Maybe you are looking for