Problem in sending mail

Hi all,
I'm having some problem in sending mail. I did all configuration regarding this. After that when i tried to send mail, its giving some error, tht is, "SendMailService is not available".
Can anybody help me on this.
Thanks,
Raj

Hi Raj,
Go to System Administrator > System Configuration > Knowledge Management > Content Management > Global Services > Mailing Service and make active option true, then restart your portal. Hope it'll work fine.
Regards,
Ganpati Jha

Similar Messages

Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send..

Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send Code 501..
Need help with T-bird.. My OS is Win XP-64..Have been using Mozilla for about 10 years with little or no problems.. This happened when I upgraded to 3.17.. Spent hours on T-Bird diagnostics web site.. Called Comcast & talked to a net tech.. he ran some tests on his end & had me log into my Comcast e-mail account & all worked well,, so he concluded the problem was in T-Bird.. He had me change my port to 587 & disable connection security & authentication to none & I was able to send mail.. That was all he could do.. Comcast was working.. the problem is in T-Bird.. Can any one help with this problem.. I don't want to send mail with my password transmitted insecurely..
Thanks
Richard

It was not intended to be "snide". You said two separate things that at face value would be out of the ordinary.
I considered if it might be a typo for 31.7. Since 31.5 is the current formal release, I would have to thank you for volunteering to test a pre-release beta version. If it was truly 3.1.7 then it would appear that you have chosen, or have become stuck with a somewhat ancient version. In either case it's harder to reach out to you with any meaningful comments or advice. However I do watch various other sites and newsgroups and I don't see a clamour of distressed users, so it seems fair to suppose that this feature isn't actually broken in 31.7.
And you said XP 64. XP is obsolete and no longer supported and if there is a 64-bit version, then again you have set yourself apart from the mainstream.
I had a look at the comcast site and found some puzzling recommendations. Some users come here asking how to set up a secured connection in Thunderbird when it isn't offered by the server. Comcast are different, in that they mention the ports 143 and 587, and also 993 and 465. So far so good, in that security is actually on offer, but they also suggest that you enable SSL, regardless of which port is being used. It would be unusual and unconventional to offer TLS or SSL on ports 143 and 587. STARTTLS would be more credible on these ports.
Have you tried IMAP on 993 and SMTP on 465? SMTP on 587 with SSL, or TLS, is not impossible, but is improbable.

Problem in sending mails to multiple persons

Hi,
I have a problem in sending mails to multiple people....
My mail is using the local smtp server...The mail is to be send to multiple addresses in to and cc.
for e.g the to address will have --> [email protected];[email protected]
cc address will have --> [email protected];[email protected]
How do this i.e set multiple to and cc address...
My function that sends mail from my ejb looks like this...
// create some properties and get the default Session
     Properties props = new Properties();
     props.put("mail.smtp.host", host);
     Session session = Session.getDefaultInstance(props, null);
     try{
     Message msg = new MimeMessage(session);
     msg.setFrom(new InternetAddress(from));
//I HAVE TO SET MULTIPLE "TO" ADDRESSES HERE INSTEAD OF JUST 1
     InternetAddress[] address = {new InternetAddress(to)};
     msg.setRecipients(Message.RecipientType.TO, address);
//I HAVE TO SET MULTIPLE "CC" ADDRESSES HERE INSTEAD OF JUST 1
InternetAddress[] addresscc = {new InternetAddress(cc)};
     msg.setRecipients(Message.RecipientType.CC, addresscc);
     msg.setSubject(msgSubj);
     msg.setSentDate(new java.util.Date());
     msg.setText(msgText);
     Transport.send(msg);
     }catch (MessagingException ex) {
System.out.println("\nException handling in javaMail.java :" + ex);
Please help me out with a solution!!!Thanks in advance.
Thanks
Rahul

Hi all,
Got the solution...
We have to use addRecipients method of the Message class to add as many receipts we want to set.
example: Message.addRecipients(type,address).
Thanks
Rahul

Problem in sending mail from VF03

Hi
I am just getting a problem in sending mail to the recipient from script.
please find the below code and let me know why there is no data in otf_tab table.
DATA: otf_tab TYPE TABLE OF itcoo WITH HEADER LINE.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = i_itcpp
    TABLES
      otfdata = otf_tab
    EXCEPTIONS
      OTHERS = 1.
IF otf_tab[] IS NOT INITIAL.
      TRY.
          CREATE OBJECT mailer
            EXPORTING
              i_nast = nast.
     mailer->get_mail_address( EXPORTING i_adrnr = vbdkr-adrnr ).
          mailer->get_mail_address( EXPORTING i_adrnr = vbdkr-adrnr
                                                 i_vkorg = vbdkr-vkorg
                                                i_vtweg = vbdkr-vtweg ).
        zcl_sd_mail_output=>convert_otf_to_pdf( IMPORTING pdf_xstring =
        gv_pdf_string
                                                CHANGING otf_table   =
                                                otf_tab[] ).
          mailer->build_and_send_email( EXPORTING pdf_xstring =
          gv_pdf_string ).
        CATCH zcx_sd_mail_no_mailid INTO error.
          error_txt = error->get_text( ).
          zcl_sd_mail_output=>protocol_update( msg_id = 'VN'
                                               msg_nr = '902'
                                               msg_ty = 'E'
                                               msg_v1 = error_txt ).
          retcode = 1.
          CLEAR error_txt.
      ENDTRY.
    ENDIF.
Since my OTf_tab is initial i am unable to send mails.

Hi,
If the OTF Data table is blank then you might have missed the parameter "GETOTFDATA" at the time of calling "OPEN_FORM". Please pass field TDGETOTF = "X" in paramter "OPTIONS" when you are calling "OPEN_FORM".
You can also visit this link for more information.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/49e15474-0e01-0010-9cba-e62df8244556?QuickLink=index&overridelayout=true
Cheers,

Problem in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

PROBLEM IN SENDING MAIL TO POSITIONS THROUGH SEND MAIL STEP

Hi Experts,
I am facing some problems in sending mail to positions from the organization structure from the send mail step.When I am using user as the recipient type it is working fine...but when i am choosing S position as the recipient type it is giving the error in the workflow log stating that method SENDTASKDESCRIPTION cannot be executed.
I need to find a solution urgently...any suggestion would be sincerely appreciated.
thanks.
Narsingh

Well you have probably tried this.. but just a recheck.
1 . send email setep select Organizational Object
2. Recipient Type Organizational Unit
3. Here do an F4 and then select the Unit...
Try this SAP behaves weirdly at times...
after this do Refresh Buffers.. and Org Unit...
Let us know if this works

Problem of sending mail with MTA

Hi,
I have installed Sun Messaging Server, but I have a problem to send mail to other SMTP server over internet, like gmail, hotmail... So I have tried to send an email using javamail and I get this exception "530 5.7.1 Relaying not allowed", that mean that I don't have a Relay SMTP to routing the messages. But the idea that I have, is that the MTA installed with Messaging Server play the role of SMTP Relay.
So this idea is true, so I think is can be I problem of configuration, and I need to have may own SMTP Relay and don't using ISP Relay.
and I thank you for your help,
Mabrouk.

GS1-Tunisia wrote:
21-Nov-2008 17:32:31.58 tcp_local Q 1 [email protected] rfc822;[email protected] [email protected] TCP active open: Failed connect() Error: Connection timed out
This indicates that Messaging Server is unable to connect to the yahoo mail servers.
I have configured my server to use mydomain.com with ip 41.x.x.xHow did you configure your server to achieve this -- what settings did you add/change?
but when I see this log [email protected] is converted to [email protected] and 192.168.3.2 is mailhost which is behind firewall in DMZ, So it may be the problem of NAT, I don't know!!!
Given that Messaging Server cannot connect to the yahoo mail servers, the problem appears to be at the networking level so the firewall is most likely blocking the outgoing port 25 connection.
When you are on the Messaging Server system, what output do you get for the following command:
telnet a.mx.mail.yahoo.com. 25Regards,
Shane.

Problem with sending mail throgh java mail api

hi folks,
We are having problem regarding sending mail using java mail api.
we are using msgsendsample.java file from demo folder contained in javamail-1.3.3_01 folder.
we are using following command at dos prompt.:
java msgsendsample [email protected] [email protected] smtp.mail.yahoo.com false
It gives following Exception:
--Exception handling in msgsendsample.java
com.sun.mail.smtp.SMTPSendFailedException: 530 authentication required - for hel
p go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1
333) at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:906)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:535)
at javax.mail.Transport.send0(Transport.java:151)
at javax.mail.Transport.send(Transport.java:80)
at msgsendsample.main(msgsendsample.java:93)
** ValidUnsent Addresses
[email protected]
Thanking in Advance...
Please give us guidance to any alternate solution if exists.

hi
the smtp server u are using should allow u to send mail to other smtp server like if u r sending mail to yahoo account u have to use yahoo smtp server only .....
bye

Problem wiht sender mail adapter.

Hello.
I have a mail to RFC scenario.
There sender mail adapter fails if the mails in the inbox is encoded in specific formats.
I think the mail adapter does not understand this encoding.
Below is the error i got.
error occured: [2008-09-08T08:22:25Z] 5 new messages found; processing message 1exception caught during processing mail message[1]; java.io.UnsupportedEncodingException: utf-7; processing message 2exception caught during processing mail message[2]; java.io.UnsupportedEncodingException: utf-7; processing message 3exception caught during processing mail message[3]; java.io.UnsupportedEncodingException: utf-7; processing message 4exception caught during processing mail message[4]; java.io.UnsupportedEncodingException: utf-7; processing message 5exception caught during processing mail message[5]; java.io.UnsupportedEncodingException: utf-7; action[s] taken
Is there a solution 2 overcome this problem.
I tries to use a module called "TextCodepageConversionBean" but it was not of much use.
Please help.
Thanks,
Vignesh

HI
Mail adapter does not understand "UTF-7" as shown in the error.
Mail adapter supports only
base64
Quoted-Printable
http://help.sap.com/saphelp_nw70/helpdata/EN/23/c093409c663228e10000000a1550b0/content.htm
If you want to make your adapter more than this. Then create a custom module using open libraries that will allow you to read many Encoding standards.
Thanks
Gaurav

Problem with Sender Mail Adapter

Hi experts,
I'm developing a Mail-XI-RFC scenario and have a problem in the mapping. I have created a MI based in the structure of the attachment of the mail. I have a mapping that does xml->RFC and tests OK. When I send a mail to the account of the sender adapter, the system generates two payloads, the 'MailMessage' and the 'MailAttachment-1' that is the xml to map, but I have an error in SXM_MONI 'Cannot produce target element /ns0:...RFC name'.
The Sender Adapter configuration uses message protocol XIPAYLOAD, I have checked Mail Package, base 64 and keep Attachments. Interface namespace is the same as the xml and default interface name is the message interface created of type my xml.
What is wrong?
Best Regards,
Alfredo Lagunar.

In this case you need to use payloadswap bean for swapping the payload and attachment
http://help.sap.com/saphelp_nw04/helpdata/en/70/f3cbad30ee479cb15672219f3405f0/frameset.htm
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step check this
Rajesh
Edited by: Rajesh on Feb 4, 2009 2:52 PM

Problem in sending mail from REPORT BUILDER...HELP ...PLS ....URGENT

Hi All,
I added the mailserver part in the rwbuilder.conf file.This is how it looks
<pluginParam name="mailServer">smtp.xxx.com</pluginParam>
The smtp server of our company is working fine.
Now when i am sending mail frm report builder i am getting the error.
Pls tell me .....
Do i have to configure any other file?
Should the smtp server be running in my local machine?WHAT IS THE SOLUTION ...FOR THIS PROBLEM?
Please someone give me some guidance..
regards,
ashok

Hi,
Pls give some idea ......
your reply will be greatly appreciated.
regards,
ashok

Problem to send mails

I've installed the OCS R1 Singlebox on a windows 2000 server.
But now I have the problem to send Email. The "Mailer-Daemon" send me the following message back.
Von: "Mail Delivery Subsystem" <[email protected]>
An: <[email protected]>
Cc:
Betreff: Could not deliver mail: see transcript for details
Datum: Nov 12, 2003 11:17 PM
Priorit�t: NORMAL
Mime-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status; BOUNDARY="----ORCL_ES6_BOUNCE_1062----"
Anh�nge:
----- The following addresses had delivery problems -----<[email protected]> (unrecoverable error)
From: "Mail Delivery Subsystem" <[email protected]>To: [email protected]: 1.0Content-Type: multipart/report; report-type=delivery-status; BOUNDARY="----ORCL_ES6_BOUNCE_1062----"Date: Thu, 13 Nov 2003 00:17:05 +0200Subject: Could not deliver mail: see transcript for details------ORCL_ES6_BOUNCE_1062----Content-Type: text/plain ----- The following addresses had delivery problems -----<[email protected]> (unrecoverable error)------ORCL_ES6_BOUNCE_1062----Content-Type: message/delivery-statusReporting-MTA: dns; server1-hecht.hecht.comReceived-From-MTA: DNS; server1-hecht.hecht.comFinal-Recipient: RFC822; [email protected]: failedStatus: 5.0.1Diagnostic-Code: SMTP; 501 5.5.4 Invalid AddressRemote-MTA: DNS; bluewin.chLast-Attempt-Date: Thu, 13 Nov 2003 00:17:05 +0200------ORCL_ES6_BOUNCE_1062----Content-Type: message/rfc822Return-Path: <[email protected]>Received: from server1-hecht.hecht.com by server1-hecht.hecht.com with ESMTP id 10621068678981; Thu, 13 Nov 2003 00:16:21 +0200Message-ID: <2076777.1068678981559.JavaMail.SYSTEM@server1-hecht>Date: Thu, 13 Nov 2003 00:16:21 +0100 (CET)From: [email protected]: [email protected]: Mime-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: quoted-printableX-Priority: 3X-Mailer: Oracle Webmail Client(UIX)------ORCL_ES6_BOUNCE_1062------
Please help me
Thanks

u should configer the relay server in the smtp_out on the um_messageing

Problem in sending mail thru SAP.

Hi All
I have typical problem in sending Purchase order thru mail to vendor.
We are sending Purchase Order to our vendor thru mail and copy of purchase order as attachment in pdf file.
I am sending Purchase Order number 45XXXX01, vendor is getting something else say 45XXXX03. But when I checked the same in outbox in SAP business workplace then it is found correct i.e. Purchase Order number 45XXXX01 but when vendor open his attachment then he is found Purchase Order number 45XXXX03.
Following FMu2019s are used in y-program to send mail.
CONVERT_OTF u2013 To convert into pdf.
SO_DOCUMENT_SEND_API1 u2013 To send mail.
I do not understand why it is happening.
Kindly suggest something to overcome this.
Regards,
Rajesh Vasudeva

Hey do as follow
1 > When you send the mail , after running ur program , you furst open the sent data from SOST or SCOTT etc. and see is it a correct data.
2 > Try sending the mail to urself , also try to mention ur id along with vendors Id and see what do u get also same time check what r u sending.
Hopefully it will give you some idea.
Regards,
Uma Dave

Problem in sending mail to external id from customer exit

Hello All,
I have a problem that I am sending mail to supervisor. I have written code and it is working correctly in se38 program.
This code If I keep in an exit and run tcode then it is not working and it is giving message no mail sent.
Why is this so? The same code is working in SE38 program and not working in an EXIT.
Pls give me solution as soon as possible.
Thanks in advance.
nallani

>>Why is this so? The same code is working in SE38 program and not working in an EXIT.
It is because the Email function has a COMMIT WORK statement & you cannot/should not COMMIT inside a User exit.. to avoid this conflict, simply SUBMIT the Report ie pla cethe email function omdule inside a Report program & call it from the User exit using the SUBMIT statement.
~Suresh

Problem in sending mail for a pop3 account using transport.send(msg)

hi,
i am having problem in not able to send mail for a pop3 account ...
I have written an email gateway which listens to my pop3 account...on email arrival it listens nd extract the contents and send it as an sms msg...upon failure it needs to deliver the mail to sender id.I am using quartz to listen.
i am using jboss for server and java mail api.
here is my code
MimeMessage mimemsg = new MimeMessage(session);
                                                       mimemsg.setFrom();
                                                       mimemsg.setRecipients(Message.RecipientType.TO, to);
                                                       mimemsg.setSubject(subject);
                                                       mimemsg.setText(parsedText);
                                                       mimemsg.setSentDate(new Date());
                                                       mimemsg.setContent(strBuff.toString(), "text/html");
                                                       System.out
                                                                                .println("Before sending mail");
                                                       Transport.send(m);
                                                            System.out.println("message sent successfully");
excepition i am getting is :
2008-09-12 11:45:11,140 INFO [STDOUT] Before sending mail
2008-09-12 11:45:11,140 ERROR [STDERR] javax.mail.IllegalWriteException: POP3 messages are read-only
2008-09-12 11:45:11,140 ERROR [STDERR]      at com.sun.mail.pop3.POP3Message.saveChanges(POP3Message.java:438)
2008-09-12 11:45:11,140 ERROR [STDERR]      at javax.mail.Transport.send(Transport.java:97)
2008-09-12 11:45:11,140 ERROR [STDERR]      at com.openstream.emailgateway.sources.ListenEmailGateway.execute(ListenEmailGateway.java:422)
2008-09-12 11:45:11,140 ERROR [STDERR]      at sun.reflect.GeneratedMethodAccessor89.invoke(Unknown Source)
2008-09-12 11:45:11,140 ERROR [STDERR]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
2008-09-12 11:45:11,140 ERROR [STDERR]      at java.lang.reflect.Method.invoke(Method.java:585)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.MessageDrivenContainer$ContainerInterceptor.invoke(MessageDrivenContainer.java:495)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.plugins.MessageDrivenInstanceInterceptor.invoke(MessageDrivenInstanceInterceptor.java:116)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.plugins.RunAsSecurityInterceptor.invoke(RunAsSecurityInterceptor.java:109)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.MessageDrivenContainer.internalInvoke(MessageDrivenContainer.java:402)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.ejb.Container.invoke(Container.java:960)
2008-09-12 11:45:11,140 ERROR [STDERR]      at sun.reflect.GeneratedMethodAccessor88.invoke(Unknown Source)
2008-09-12 11:45:11,140 ERROR [STDERR]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
2008-09-12 11:45:11,140 ERROR [STDERR]      at java.lang.reflect.Method.invoke(Method.java:585)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
2008-09-12 11:45:11,140 ERROR [STDERR]      at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.ejb.plugins.inflow.MessageEndpointInterceptor.delivery(MessageEndpointInterceptor.java:263)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.ejb.plugins.inflow.MessageEndpointInterceptor.invoke(MessageEndpointInterceptor.java:140)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.proxy.ClientMethodInterceptor.invoke(ClientMethodInterceptor.java:74)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
2008-09-12 11:45:11,171 ERROR [STDERR]      at $Proxy73.execute(Unknown Source)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.jboss.resource.adapter.quartz.inflow.QuartzJob.execute(QuartzJob.java:57)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
2008-09-12 11:45:11,171 ERROR [STDERR]      at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2008-09-12 11:45:11,171 INFO [STDOUT] USer flag ..[Ljava.lang.String;@115c6cb

as i am writing the message failure details to a template...
     //on failure to send messages , reply to the sender about the failure
                                                            strBuff= tempDetail.writeToTemplate(smsmsg);
is that bcoz i am getting an exception

Problem in sending mail

Similar Messages

Maybe you are looking for