Problem in SM:EXEC SERVICES job.

Hi Experts,1. SM:EXEC SERVICES job is getting cancelled in our solution manager system,
After checking the job log I found out that Job is getting cancelled with ABAP dump SYNTAX_ERROR
2. I checked for the ABAP dump and found that job is getting dump when trigerring Standard SAP program
RDSVASCEW_DBORA____________060. I checked for any OSS notes in service market place but could not fix...
3. I tried manually doing syntactical check for the program but it is getting syntax error in
INCLUDE report "/1CAGTF/IF_LOGFUNC_000498" not found.
If some body could advice on the issue, it would be great help !! Thanks
Let me know if I need to provide more details on the problem.
Regards, Amber S

>
Ruediger Stoecker wrote:
> This is not required for the mentioned dump. The dump pattern is well known
>
> Just follow the instructions of SAP Note 727998 (which has been already recommended above). It's the standard answer and it's always recommended. It will solve the SYNTAX_ERROR.
If the dump pattern is well known, the reason behind the dump or to replace service definitions should have been explained.
Some of the programs (e.g.'RDSVASAEW_ROOT_____________027', 'RDSVASAEW_DBORA____________032') used in the SAP Solution Manager cannot be generated anymore. During the attempt to generate them, the system generates the following error: 'GEN_TOO_MANY_CBS, generation error: Too many DATA control blocks generated', 'Field "OMS_VERSIONS000910" unknown'.
Check this note.
525097
-=-Ragu

Similar Messages

SM:EXEC SERVICES job getting failed in Solution manager

HI All,
SM:EXEC SERVICES job getting failed in solution mnager and job log will be fowlloing:
01-31-2012 19:09:21 Job started
01-31-2012 19:09:21 Step 001 started (program RDSMOPBACK_AUTOSESSIONS_ALL, variant , user ID BASISUSER)
01-31-2012 19:09:21 MemSize Begin = 796480 Bytes
01-31-2012 19:09:21 *******************************
01-31-2012 19:09:21 MemSize Begin = 1919120 Bytes
01-31-2012 19:09:23 Solution <000000106120000> "SID..." is being edited (Operations)
01-31-2012 19:09:23 <000000106120000> "SID..."(Operations)
01-31-2012 19:09:23 "Create_Periodic_Services" uses = 0 bytes
01-31-2012 19:09:23 "Create_Periodic_Services" uses = 690 us time
01-31-2012 19:09:23 Trying to perform session EC2000000001313
01-31-2012 19:09:24 MODEL_KEY: SID Installation Number: 6 MODEL_MODE: E MODEL_VERSNR 00001 MODEL_CLASS: EWA Data Model
01-31-2012 19:09:30 Definition nicht vorhanden
01-31-2012 19:09:33 Definition nicht vorhanden
01-31-2012 19:09:45 Internal session terminated with a runtime error (see ST22)
01-31-2012 19:09:45 Job cancelled
St22 Dump:
The exception 'CX_DSVAS_API_CONTEXT_INSTANCE' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLDSVAS_PROC' has to be
terminated.
Please suggest how to proceed further and provide your valuble inputs
Thanks
Nekkalapu

HI Siva,
I have done the changes according the note but still same problem.
Please suggest any other ways to resolve this issue .
Advance thanks
Regards
Nekkalapu

SM: EXEC SERVICES Job is Cancelling

Hello everyone-
I have seen a few posts about this job cancelling however I haven't been able to gather a solution from what I have read. After appling SP15 in our Solution Manager system, the SM: EXEC SERVICES job is failing.
We sent a note off to SAP and they responded back with the instruction to implement notes 611536 and 727998. We have held off on implementing them because they seem awfully involved in order to correct a cancelled batch job. Has anyone implemented these notes? If so, did it solve this problem?
Here are the details from ST22:
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAEW_DBUDB____________057
" in include "RDSVASAEW_DBUDB____________057 " in
line 61:
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000300" not found"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Any ideas?

>
Nathaniel Williams wrote:
> Hello everyone-
> We sent a note off to SAP and they responded back with the instruction to implement notes 611536 and 727998. We have held off on implementing them because they seem awfully involved in order to correct a cancelled batch job.
>Has anyone implemented these notes? If so, did it solve this >problem?
Hi Nathaniel,
just follow the instructions of SAP Note 727998. It's the standard answer and is always recommended.
It will solve the mentioned SYNTAX_ERROR.
Just search for this note in the forum.
Best regards,
Ruediger (also from SAP)

SM:EXEC SERVICES JOB CANCELLED with MESSAGE_TYPE_X dump

In SAP solution manager server SM:EXEC SERVICES job is Cancelling
Hence we are unbale to get the EWA reports...
Error:
Job started
Step 001 started (program RDSMOPBACK_AUTOSESSIONS, variant
&0000000001009, user ID RAOP)
Solution OC Application Monitoring is being edited (Operations)
Trying to perform session 5000000003618
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Applied note 727998 but no use... please help me .
Regards
Prabhakar
Version details:
ST-SER 620-2006_2
PI_ BASIS 2005_1_620

Hi Prabhakar,
Which SP of Solman are you using? If you are using Solman SP12 then the ST-SER has to be upgraded to higher version. Also update the PI_BASIS component.
ST-SER 700_2007_1
PI_BASIS 2006_1_700.
Regards,
Raghavendra.

EWA state="data is available" but there is no "SM:EXEC SERVICES" job

Hi everybody,
i have a Problem with EWAs. It seems to work all fine, it does, until the EWA is in the state "data is available".I can generate a EWA without a problem, when i use the button "start service processing", but i want it to be generated automatically. I searched with TA SM37 for the job SM:EXEC SERVICES in SolMan and in the monitored system, but i didn´t find the job?
Any ideas, what the problem can be?
Best regards,
Stefan

Hi,
@Rohit
Thank you for your reply, but this was not what i looked for. Thank you anyway!
@David
Thanks, i will check my system and look at the table, i think this is a good beginning. Unfortuneately the note is at the moment not available....
I am going to give feedback, if i found the finally solution!
Bg,
Stefan

Problem with EXEC services Job

Hi,
We are facing problem in Solution Manager 3.0 with EWA report generation. For the scheduled date of EWA , the job RDSMOPBACK_AUTOSESSIONS failed with an error CONNE_ILLEGAL_TRANSPORT_HEADER.
Can anybody , faced or have an solution for the same.
Regards,
Narender

Hi Narender,
usually, this kind of dump is related to a corrupted data collection for the EWA session.
I recommend to delete the download (run DSA, enter the 13 digits session number, choose display and click on the truck symbol, there should be possibility to delete the data). The processing job will run again. You may collect the data in SDCCN again or just create a new EWA session in Solution Manager.
Best regards
Ruediger Stoecker

SM:EXEC Services is failed

Hi!
I am about to start backgroud job SM:EXEC Services in order to see my EWA from Tcode DSWP.
I started the job as SAP* or DDIC and
receive the following <b>error :ABAP-Processor: Syntax error</b>
(step 001 started)(Program RDSMOPBACK_AUTOSESSIONS, ...)
Has perhaps some one the same error or know how to proceed?
Thank you very much indeed
regards

Hi!
Thank you!
Here is the error from SM:EXEC SERVICES job:
Short text: Syntax error in program "RDSVASAEW_ROOT_____________073 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAEW_ROOT_____________073
     " in include "RDSVASAEW_ROOT_____________073 " in
    line 197:
    "Feld "FB_DLDINSTPAR_TAB001155" unbekannt. Es existiert aber ein Feld m"
    "it dem ähnlichen Namen "FB_DLDINSTPAR_TAB000807"."
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "RDSVASAEW_ROOT_____________073".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Thank you very much for your further help/information
regards

Short dump while executing job SM:EXEC SERVICES for EWA alert generation

Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.

>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul

SM:EXEC SERVICES background job Failing

Hi All,
I am having a problem with the job SM:EXEC SERVICES in solution manager system, I have done all the steps in sapnote 727998, applied the transport given by sapservx but no luck.I suppose this is a very comon problem and should have solved by applying the mentioned note.Here are the logs of the job ..
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAABAP_TRANS__________072
" in include "RDSVASIABAP_TRANS__________072 " in
line 3074:
"Field "/SSF/DHEAD-GUID" is unknown. It is neither in one of the specif"
"ied tables nor defined by a "DATA" statement. "DATA" statement."
Regards,
Jawad

Hi Jawad,
according to service.sap.com/supporttools->ST-A/PI ->Installations and Patches:
"The Service Tools for Applications Plug-In must be installed on all SAP Systems in your system landscape including the SAP Solution Manager."
So the answer is yes.
best regards,
-David.

The background job "SM:EXEC SERVICES" is ending Green in Just 0 seconds

Solution Manager 4.0
In our customer system the background job "SM:EXEC SERVICES" is ending Green in Just 0 seconds or just 1 second.
Here is the log:
Job log overview for job:    SM:EXEC SERVICES 000000046740000 / 12193100
Date       Time     Message text                                                                               Message class Message no. Message type
28.04.2009 12:19:31 Job started                                                                                00           516          S
28.04.2009 12:19:31 Step 001 started (program RDSMOPBACK_AUTOSESSIONS, variant &0000000001054, user ID BJ8099)      00           550          S
28.04.2009 12:19:32 RDSMOPBACK_AUTOSESSIONS : MemSize Begin = 1374064                                              DSWP          000          I
28.04.2009 12:19:32 Solution Enterprice Portal(GGP) is being edited (Operations)                                   DSWP          438          I
28.04.2009 12:19:32 RDSMOPBACK_AUTOSESSIONS : MemSize End = 20902480                                               DSWP          000          I
28.04.2009 12:19:32 Job finished                                                                                00           517          S
Due to this EWA reports are not being generated.
What could be the reason that the Job ends immediately with no significant warnings or error in the log?
Many thanks in advance,
Manoj

Hi Manoj
Following Notes will be helpful to you to analyze the problem
Note 894279 - Background processing in SAP Solution Manager
Note 1246329 - RDSMOPBACK_AUTOSESSIONS: Additional displays
Note 1163920 - SM:Scheduler: Improved display in job log
Note 946607 - Automatic diagnosis in SAP Solution Manager
SAP Note 727998 "Complete Replacement of Service Definitions for SDCC/SDCCN"
Note 986973 - How to analyze problems with EarlyWatch Alerts in SolMan
however, is this problem occurring for sessions of ALL the systems today, if yes, then something wrong only in solman, last note of the above shows you to manually run the job interactively, may be will help in analyzing and i hope SDCCN settings in Solman are already fine..
thanks
Bhudev

At least one service session failed during job SM:EXEC SERVICES

Hello everyone.
I'm have problem with job "SM:EXEC SERVICES" in my System: SolutionManager 7.1 SPS12.
Number of sessions to process in parallel: 5
Child job SM:EXEC_MULT_SES_1 started
Displaying log of child job SM:EXEC_MULT_SES_1
Step 001 started (program AGS_SISE_SM_EXEC_PARALL_REPORT, variant &0000000000060, user ID SOLMAN_BTC)
Trying to perform session EA0010000000001
Error (shown below) in session EA0010000000001. Hints on analysis in SAP Note 700518
Error message: An exception occurred that was not caught.
Session EA0010000000001 not performed
Step 002 started (program AGS_SISE_SM_EXEC_PARALL_REPORT, variant &0000000000061, user ID SOLMAN_BTC)
Trying to perform session VE0010000000002
Error (shown below) in session VE0010000000002. Hints on analysis in SAP Note 700518
Error message: An exception occurred that was not caught.
Session VE0010000000002 not performed
ABAP DUMP "Error analysis":
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_DSVAS_API_SERVICE_SESSION', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
Program for actions in check group &EW_ROOT& version &50079& not found
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SY_PROGRAM_NOT_FOUND", which was raised in the program
"CL_DSVAS_PROC_CHECK_GROUP=====CP",
specifically in line 25 of the (include) program
"CL_DSVAS_PROC_CHECK_GROUP=====CM00A".
The cause of the exception was:
Program /1AGS/AEW_ROOT_____________079 does not exist
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_DSVAS_API_SERVICE_SESSION', was
   not caught and
therefore caused a runtime error.
The reason for the exception is:
Program for actions in check group &EWAFS_ROOT& version &50007& not found
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SY_PROGRAM_NOT_FOUND", which was raised in the program
   "CL_DSVAS_PROC_CHECK_GROUP=====CP",
specifically in line 25 of the (include) program
   "CL_DSVAS_PROC_CHECK_GROUP=====CM00A".
The cause of the exception was:
Program /1AGS/AEWAFS_ROOT__________007 does not exist
i'm was trying find program "/1AGS/AEWAFS_ROOT__________007" and "/1AGS/AEW_ROOT_____________079" in SE80, but to no avail.
Full job report and dumps in attachment.
Kernel release    721
Compilation       Linux GNU SLES-11
Sup.Pkg lvl.      401
ABAP Load         1780
CUA load          39
Mode              opt
SAP_BASIS
702
0015
SAPKB70215
SAP Basis Component
SAP_ABA
702
0015
SAPKA70215
Cross-Application Component
CTS_PLUG
200
0013
SAPK-20013INCTSPLUG
SAP CTS Plugin
PI_BASIS
702
0015
SAPK-70215INPIBASIS
Basis Plug-In
ST-PI
2008_1_700
0011
SAPKITLRDK
SAP Solution Tools Plug-In
BI_CONT
707
0007
SAPK-70707INBICONT
Business Intelligence Content
GW_CORE
200
0008
SAPK-20008INGWCORE
SAP GW CORE 200
SAP_BS_FND
702
0013
SAPK-70213INSAPBSFND
SAP Business Suite Foundation
SAP_BW
702
0015
SAPKW70215
SAP Business Warehouse
UISAPUI5
100
0007
SAPK-10007INUISAPUI5
SAP UI5
UI_INFRA
100
0007
SAPK-10007INUIINFRA
SAP UI INTEGRATION INFRASTRUCTURE
IW_GIL
100
0004
SAPK-10004INIWGIL
Generic Interaction Layer
SAP_AP
700
0031
SAPKNA7031
WEBCUIF
701
0012
SAPK-70112INWEBCUIF
SAP Web UI Framework
BBPCRM
701
0012
SAPKU70112
BBPCRM
CPRXRPM
500_702
0011
SAPK-50011INCPRXRPM
SAP Portfolio and Project Management 5.0 (ABAP)
IW_BEP
200
0008
SAPK-20008INIWBEP
Backend Event Provider
IW_FND
250
0008
SAPK-25008INIWFND
SAP IW FND 250
ST
710
0012
SAPKITL712
SAP Solution Manager Tool
ST-BCO
710
0010
SAPK-71010INSTBCO
BI Content for SAP Solution Manager
RTCISM
100
0000
Integration into SAP IT Infrastructure Management
SOCO
101
0003
SAPK-10103INSOCO
SAP Solution Composer Server
ST-A/PI
01R_700
0001
SAPKITAB7N
Application Servicetools for SolMan 7.0-
ST-ICC
200
0001
SAPK-20001INSTICC
Innovation Control Center
ST-ICO
150_700
0043
SAPK-15087INSTPL
SAP Solution Manager Implementation Content
ST-SER
701_2010_1
0025
SAPKITLOSP
SAP Solution Manager Service Tools

Hi,
Try this.
Run RAGS_DSWP_SERV_CONTENT_RESET in Se38 and seclect "Remove content completely"
Goto AGS_UPDATE and apply the updates again and make sure that all is are green.
Open the EWA session that was dumping and reset session component.
Regards,

Solution Manager - Error when executing Job SM:EXEC SERVICES

Hi,
I am trying to get the data from the earlywatch alert report and when i start the job SM:EXEC SERVICES.
The jobs starts but i get an error during is execucion:
Runtime errors         SYNTAX_ERROR
       Occurred on     17.01.2008 at   14:06:28
Syntax error in program "RDSVASAEW_DBMSS____________052 ".
What happened?
The following syntax error occurred in the program
RDSVASAEW_DBMSS____________052 :
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000208" not found."
Error in ABAP application program.
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
I tried to generate all the function modules and i get this error:
Logical function: MSQ_TEMPDB_DOWNLOAD            :
Error      1 during generation of /1CAGTF/IF_LOGFUNC_000208
Syntax error.
Can you help me on this error?
Best regards,
Nuno Silva

Hi Pedro,
I insert my answer from a similar thread.
As a pitty, that's a well known error.
Please check [SAP Note 727998|http://service.sap.com/sap/support/notes/727998]
Basically, these three steps needs to be performed:
1) BDL_DELETE_ALL_TABLES
2) SDCCN - Refresh Service Definitions
3) Generate Logfuncs
SE37: /BDL/_GENERATE_LOGFUNCINCLUDES
OPTION: ALL
It's also described in the Implementation Guide (IMG), transaction SPRO in the SAP Solution Manager system:
SAP Solution Manager -> Configuration -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> Service Data Control Center
-> Activate the Service Data Control Center in the Solution Manager
-> Generate Includes for Service Data Contol Center
With the next ST-PI Support Package. The steps can be triggered via the menu of transaction SDCCN.
Best regards,
Ruediger Stoecker

Deleated job SM:EXEC SERVICES

Hi Gurus
I deleated the job SM:EXEC SERVICES by mistake. Can somebody help me to recreate that job ined the following info the ABAP program, Variant, Start time and Repetition period.
Regards
Santosh

Hello,
Go to the SM37 and try to find older ones, please don't forgot change Job start condition to the past.
If you automatically do not delete all finished or cancelled or ... job on daily base you will find older one.
But activating can be done according instruction at here>>
http://help.sap.com/saphelp_sm32/helpdata/en/81/e06b41466b021de10000000a155106/content.htm
Peter

Unable to open solution in Solution Manager - SM:EXEC SERVICES

Hello Experts!!
We have Solution Manager 3.2 SR1 on Solaris 10
We have confiured EWA report to be generated every week through the solution manager. The session data although gets generated for the service created in Solution manager but we are unable to download the EWA report as the automatic job SM:EXEC SERVICES fails with the job log as
Unable to open solution Test. (where the solution name is Test).
Message no. DSWP017
When the service processing is started explicitly it runs accordingly. Could you please let me know whether it is an authorisation issue or something else?
Thanks and Regards,
Karan Shah

Take a look at the following notes that desribe the reason and
the solution for this issue:
SAP Note 525097 - Programs cannot be generated, SYNTAX_ERROR,
                  SM:EXEC SERVICES
SAP Note 611536 - Generation error in reports
                  (name pattern RDSVAS____00*)
SAP Note 727998 - Complete Replacement of Service Definitions
                  for SDCC/SDCCN
After applying the above Note SM:EXEC SERVICE background job
should run correctly again.
Please, first refresh the service definitions on the satelite system
and then, if the problem persists, on the Solution Manager system.

SM:EXEC SERVICES SINTAX_ERROR

Olá pessoal,
Estou tentando gerar o Early Watch de alguns ambientes e estou com o seguinte problema, no momento em q os dados do ambiente ja estao disponiveis no SM e eu vou executar o job exec service para gerar o Early Watch, o job é cancelado com o seguinte erro visualizado na ST22:
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1AGS/ATECH_INIT_SFS_______009
" in include "/1AGS/ITECH_INIT_SFS_______009 " in
line 66:
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000670" not found."
Alguem aqui ja passou por situação parecida???
Desde ja obrigado.

Carlos dá uma olhada na nota 1996413 - Shortdump syntax error in Program "/1AGS/ATECH_INIT_SFS_______009
e tenta executar o procedimento abaixo:
Solution #2
Typically Syntax errors occurring in the name space /1AGS1/ can be resolved as per SAP Note 700518
If a syntax error like '/1CAGTF/IF_LOGFUNC_00nnnn not found' occurs please do a 'Delete and Replace Service Definitions' in transaction SDCCN -> Utilities -> Maintain Service Definitions. (Details of the
procedure are described in SAP Note 727998
Att,
Felipe

Problem in SM:EXEC SERVICES job.

Similar Messages

Maybe you are looking for