Problem in Subcontracting Challan

Hi,
I have given material to vendor in subcontracting on 20th April 2009 i.e. Yesterday
But today i.e. 21th April 2009 when i make subcontracting challan with J1IF01.
System Gives me Error " Document already exists for material document 4900001305 2009"
But when i do above procedure with same that system process without any error.
Regards,
Pardeep Malik

Dear Sir,
I make a subcontrcating PO yesterday and material given to vender with
material Doc Number 4900001305 on the same day.
But today when i m creating subcontracting challan with that PO system gave me Error
"" Document already exists for material document 4900001305 2009"
But when i try with a PO of today and creating challan also same day . system create challan without Error.
Hope u understand !
Regards,
Pardeep Malik

Similar Messages

Referencing Subcontract Challan in MIGO (101)

Hello All
I have one Problem in Subcontract Challan,
When we make GR for subcontract Challan, We suppose take Ref in Excise invoice tab, Ref as Subcontract Challan.
But when we try make to reconcile the challan its giving as this challan allocated to GR
Not able to reconcile. we can delete the assignment while creating challan reconcilation but i dont want that.
and Even not able to Complete the challan giving error like Challan has to be reconciled first
PLease help me in this regards,
Thanks in advance
Abhinay Waikar
Edited by: Abhinay Waikar on Sep 9, 2009 9:44 AM

Thanks you very much for quick reply
But if enter the GR document number(101) and the year
Giving me error like document does not exist.
But GR doc exist.
Please reply
Abhinay
Edited by: Abhinay Waikar on Sep 9, 2009 10:50 AM
Edited by: Abhinay Waikar on Sep 9, 2009 11:33 AM

Subcontracting challan print preview problems

Hello sir,
i am having a problem when i create subcontracting challan from j1if01 for a vendor 'S' item 'x'.
material details for 'X' is shown for vendor 'S' in challan print preview.
again when i crete second challan from j1if01 for the same vendor 'S' item 'y'
material details for 'y' is not shown for the same vendor 'S' in challan print preview.
i have maintained chapter id for both material.
regards
sanjay

Hi Sanjay,
Your problem is not clear. IS it that you have two materials in BOM and you are transferring these two materials to the vendor but only one item is printing and not the second one.
Pls check your settings under logistics General> Tax on goods movement>India--> Subcontracting attributes in that EI items. What is the number selected there. If it is one it will print different challan per item.
Regards
Sangeeta

Problem In Subcontract Reconillation / challan Closing

Hi,
I am facing problem in subcontract challna reconcillation with J1IFQ
Subcontract PO created for Finish material 'XYZ' qty 250 Nos   one raw material 'ABC' one qty required for each finish good   but in PO   user have added 450 quanity of raw material now for Finish product for quanity 250 three Grs made
1 : 126
2:   61
3:   63
but the consumption of Raw material in GR is showing as 227,110,114 this becomes 451 now the reconcillation is done for first two GR aganist which the raw material assign is 227 + 110 = 337 now as only 113 qty of rm balance now we are doing reconillation for third GR system is giving error mesage 8I574
Material 1363 is not assigned fully, short by 1.000 NO, and it is not allowin gfor reconcillation also as the uinvocie verification is already done for the GR so insted of reversing all how to close the challan.
regards,
zafar

Dear,
Here is my understanding, that is if you give 250 nos to subcontractor, he will process and give you 250 nos. This should be you actual PO. Hence if you do GRN for 1 Nos, then consumption at vendor end (543) will also be made for 1 Nos. But, you said your user has maintained the input qty as 450 nos. And subsequently you have also done the GRN's.
If my understanding is correct then do the following:
Delete the material document assignment, which you have done for the first two GRN numbers. In J1ifq.
so that the challan balance qty and status will go back to its original position.
Then cancel the GRN's. All the three. So that all the stocks will go back to vendor location.
Correct the Input- ouput ratio in the purchase order as 1:1. Then do the GRN again and do the reconciliation.
Pls revert if you need anymore clarification.
Thanks
VJ

Subcontract challan reconcillation problem

Dear All,
We are getting the following message while reconciling Subcontract challans " Material XXXX is not assigned fully , short by X nos ". Is it because if we post a single GR referencing two Purchase orders for same vendor with two different challans , will it be a problem during reconcillation ? since while sending components to vendor we create single challan wrt to 541 mat document.
Thanks in advance
Benny

Hi All,
After testing in quality system , i found that if GR 105 mvt type was done w.r.t two different purchase orders for same vendor referencing two challans , the system issues the error message " " Material XXXX is not assigned fully , short by X nos " while trying tor reconcille in J1IFQ.
Is this a standard SAP behaviour ?
So for validation purpose i cancelled the 105 mat doc and posted two different GR's referencing two challans and i was able to reconcile successfully.
Any idea if the challan reconcillation will work only for one to one combination and i.e., one PO and its 541 mat doc /challan and one 101/105 mat doc.
Kindly let me know if you have come across this cases.
Thanks
Benny

Subcontract Challan Reconciliation Problem

Dear Sir,
We are facing a probelm related to Subcontract Challan Reconciliation , problem scenario is as below :
a) We had created a Subcontract PO and transferred the relevant material to Vendor Stock against the PO reference .
b) During MIGO , by mistake we could not mention the Challan Number . So MIGO was done without Challan reference number .
As input material has already been received , so now we want to reconcile the challan (using Tcode J1IFQ) . Pl guide us as what steps need to be followed to address the problem .
With Thanks and Rgds
B Mittal

Hi,
There is no mandatry condition to ref challan while creating GR.
In J1IFQ , you can enter the Gr Number + Challan Number + Challan Year
With this process you will able to link the GR with challan.
Hope this is helpful
thanks

Problem while reconciling subcontracting challan

hi friends,
issue: while reconciling a challan im getting a msg saying that some qty of the material is not assigned fully.
but actually all the material was received.the only thing is in GR the mateerial was received in 2 batches so 2 line items. but while posting the GR itself i got a msg that po qty is deficit by the quantity i specified in the 2nd line item.but it was just warning . after posting the GR qty updation was for the whole 2 line items qty.
but what i understand is system takes the the 1st lineitem qty in GR, while reconciling the challan and says that the 2nd lineitem qty is still to be assigned.
any ideas to solve this pls
raja

hi, Raja just try reading this and do accordingly i think there should not be an error .
Once a subcontractor has processed your materials and returned them to you, you match the items in the challan against those that have been returned.
You have posted the goods receipt (or any other material document) for the returned goods.
1.From the SAP Easy Access screen, choose Indirect Taxes -.>Procurement -> Subcontracting -> Subcontracting Challans -> Reconcile Quantity.
2.Enter the following data:
a)In the Material Doc. and Mat. Doc. Year fields, enter the number of the goods receipt document and the year in which it was created.
b)In the table below, enter the challan numbers and the years in which they were created.
If the material document is a goods receipt document with movement type 101, you can enter the challans that were not captured when the goods receipt was posted. However, if all the relevant challans were entered during goods receipt, they need not be entered here
3.Choose Reconcile.
A new screen appears. At the top is the information about the goods receipt (or other document); at the bottom is the information from the challans that you have entered.
4.Specify which challans the materials in the goods receipt originated from:
a)If you have sent a subcontractor a number of different challans, all containing the same material, you can automatically specify that the materials should come from the oldest challans first, by choosing .
b)Otherwise, for each challan, enter manually the quantity of materials has been returned, and choose to refresh the display.
5.Once you have accounted for all the materials in the goods receipt, save the challan.
Result
The system changes the challans' status as follows:
1.)If you have accounted for all of the materials in a challan, the system sets its status to Fully Reconciled. In this case, you can complete the challan.
2.)If you have accounted for only some of the materials, it sets the status to Assigned. In this case, you must assign the remaining quantity of materials to another goods receipt later on.
3.)Scrap generated is assigned to a challan only if the percentage component scrap is specified in the bill of material for the parent material and this bill of material is assigned to the subcontracting purchase order.

Creation of subcontracting challan

Hi all,
I have done all the required customization settings,,,
procedure i followed is:
1. created two raw materials with material type ROH, - materials R1, R2
cretated a semifinished material with material type HALB- material S1
2.created a BOM for semifinished material S1 and assigned materials R1, R2 as components.
3. Created a PO with item category 'L', material S1, quantity 1, exploded BOM for assigning rawmaterials R1, R2.
4. Accessed t_code MB1B- movement type 541, with reference to purchase order for providing material to vendor.
5. Now I run t_code J1IF01 for creating subcontracting challan,,, there i had given material document, year, excise group, service group and executed the t_code,
and all the required fields in the transaction were filled and saved.
so finally system giving me this message:
Document 2007 10 created
problem is ,,, its not creating a number for subcontracting challan,,,
i had filled up all the excise data for the material,,,
someone can me help me out in this issue,urgent.
regards,
urendra

Hi Prasanna,
I had checked these number ranges viz. J_1IINTNUM, J_1IRG23A1,J_1IRG23A2, J_1I57FC all were maintained correctly,
System creating the subcontracting challan,, but it is not picking up the number range, I have selected the print immediately option and got the print with no subcontracting challan number...
as soon as I saved the Subcontracting challan, system gives this message
Document 2007, 50 created,,, here 2007 is the fiscal year, and 50 is the series group.
checked all the excise registers, excise group, material chapter id combination,,, everythings is ok,, kindly help me out in this issue.
regards,
urendra
[email protected]

In J1IFR-List subcontracting challans, system showing Zero Quantity pending although Qty is pending

In J1IFR-List subcontracting challans, system showing Zero Quantity pending although Qty is pending at MASOP vendor. After reconciliation of challan, the Qty sent=250 , Qty received= 113. system must show Qty pending = 137. But when we check in J1IF12, Qty sent=250 and Qty received=113. Why J1IFR report is showing incorrect output.
I am facing this problem after Ehp7 upgrade in SAP ECC 6.0 version.
Thanks & Regards,
Neeraj.

Are you using the same number ranges for different series group. This can cause inconsistency. Also check table J_1IGRXSUB whether right material documents are attached to your Challan.
Also refer to these notes which is only applicable for EHP6.
1753000 - Wrong output displayed for status in report selection-
J1IFR
and
1674607 - Duplicate entries while displaying Annexure IV in
J1IFR
Regards
Binoy

Subcontracting challan issue for end product with scrap.

Hi All,
I have one issue let me know how the system act in case of subcontracting challan process,
In our company we use one component and received two end product( one is final product and other one is scrap product)
My problem is how to treat this scrap in challan process.
Pl help me out.
Regards,
Zafina

Hi, Please use the exit to define how you want the system to consider Scrap in the subcontracting process.
Refer below exit for your problem,
1084323 USER-EXIT to update challan status if scrap is calculated
1103537 Correction to note 1084323 for ECC 6.0 Release
Please note the user exit will be accessed only if you were to write a code for it and you assigned/made 545 O as relevant to subcontracting
subcontracting scrap will work if the scrap percentage is defined for the component which is sent to the job worker. If you have a completely new material for scrap then this is not going to work as the system will never be able to assign the qty (mismatch of material code between the scrap material & the challan material).

Referance of subcontracting challan at time of GR

Hi Experts ,
i m not getting excise tab for refering subcontracting challan
Receiving material is semifinish material - all details r maintained in j1id
child material is raw material -all details maintained in jild
j1id details r -
plant -chap combination , cenvat determination , accessible value for both material
in cenvat dete input raw and output semifinish maintained
All Cin -subcontracting config is also done - subcontracting attributes in bussiness transactions and movement type groups r maintained
Now problem is that if i maintain Receiving material ( which is semifinish ) as RAw material in J1id(chapid-material combination ) then only i m getting excise tab in which there is refering subcontracting challan option available ..................but if i maintain Semifinish material as a RG1 in J1id then i dont get excise tab ............it is wrong ............how i can maintain semifinish material as a raw in J1id .it will create problem
so my requirement is although if i m maintaining semifinish material as a RG1 in J1id Which is i m going to receive from subcontractor , subcontracting tab should appear while making GR . Then only i will be able to reconsile the challan after making GR .
Please help me
Regards
Chandan

Please use the exit to define the way you want the system to consider Scrap in the subcontracting process.
1084323 USER-EXIT to update challan status if scrap is calculated
1103537 Correction to note 1084323 for ECC 600 Release
Please note the user exit will be accessed only if you were to write a code for it and you assigned/made 545 O as relevant to subcontracting
subcontracting scrap will work if the scrap percentage is defined for the component which is sent to the job worker. If you have a completely new material for scrap then this is not going to work as the system will never be able to assign the qty (mismatch of material code between the scrap material & the challan material).

Subcontract Challan closure

Dear Sir,
We have a following scenario :
We prepared a Subcontract Purchase Order of 3 nos qty and made a Subcontract Challan of 3 nos qty of the Material .
Subsequently Vendor processed the 1 number quantity and we did the GR for 1 number qty . We did the Challan Reconciliation against this GR for 1 number qty .
Later on due to some problem at Vendor site , Vendor has returned 2 numbers qty of the Material without any processing (ie same Material has been returned which was given to Vendor ) .
We have short closed the PO .
Our Problem is that there is still Pendency appaering of 2 nos qty against this Challan .
Kindly guide us as what steps need to be followed so that Challan has no pendency of the Material .
With Thanks and Rgds
Sonia

Hi,
This is can be changed in to customizing.
In customizing,
logistics general->Tax on goods movement->India->business transactions->suncontracting->subcontracting attributes->
EI items change the number of line items per challan. Whatever the value you maintain here (This information is used to split the transfer postings' items into multiple subcontracting challans), challan will contain those many line items.
Regards,
Krishna A S V

Printout of subcontracting challan

good morning gurus
my problem is that how to take print out of subcontracting challan.however i have all the necessary setting in img.
regards
k.chhikara

Relax,
Try after 5 mins as you look confused with new terminology.No problem,Rest for five minutes and then attack problem.
Study this, this is detail config of printing subcontracting challan.
http://72.14.235.104/search?q=cache:EXUjcQn3DnkJ:help.sap.com/bestpractices/BBLibrary/Documentation/J85_BB_ConfigGuide_EN_IN.docPRINTINGSUBCONTRACTING+CHALLAN&hl=en&ct=clnk&cd=3&gl=in
Regards
Kedar
****Reward points if useful to you.

PROBLEM IN SUBCONTRACTING P.O

DEAR CONS
I CREATED A SUBCONTACTING P.O & IN THE COMPONENTS I entered the components & as well as the scrap from vendor (free item) . The system does not post it. gives a message Update control of movement type is incorrect (entry 101 _ X Q B _ V)
Message no. M7226
Diagnosis
The system could not find entry 101 _ X Q B _ V in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
 For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
 For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
pl.solve this problem & gives step by step by which i can make setting.
thanking you
nirupama

Dear Nirupama Swain,
Frist check ur Stock overview Child material stocks to issue the material to subcontracting vendor.
Maintain the BOM with T.code CS01
Pls follow the steps for Subcontracting cycle:(without payment of Excise Duty)
1. A Subcontracting Purchase Order is raised on the Vendor with Item Categery 'L'
2. The Materials are transferred to the Vendor through a 541 Movement Type with T.Code MB1B
3. A Subcontracting Challan is created.
4 The Semi finished Material is received from the Vendor through 101 movement. A 543 movement occurs for the components
5. The subcontracting challan is reconciled.
6. The challan completion process is carried out.
7. Invoice Verification for the vendors invoice occurs
With regards,
B.Ravindranath

Error Message in Subcontracting challan

Dear Experts,
Here i am facing problem in processing Subcontracting challan. As per clients organisationsl structure we have two company codes and one plant for each company Code.
As per excise registration, here two Subcontracting series groups are maintained. Number range maintained for the object - J_1i57FC for two series group is same.
The number range is - 0000020001 to 0000029999.
While day to day processing of subcontracting challan, challans are created with same number for two different series group. For example challan number 20001 is posted, Fully Reconcilled and completed for series group - 44.
But again the challan number 20001 is created for series group 64 as per number range assigned to series group 64.
When i am trying to refer the challan 20001 for different company and series group in Goods receipt, it issuing the message - Challan quantity has been fully reconcilled.
If i will check status of subcontracting challan 20001 for series group 64, it shows status posted only.
Please guide me, whether we cant assign the same number range for two different series groups or there is any mistake in Challan processing or any note is available on the issue.
Thanks in advance

Dear Experts,
Here i am facing problem in processing Subcontracting challan. As per clients organisationsl structure we have two company codes and one plant for each company Code.
As per excise registration, here two Subcontracting series groups are maintained. Number range maintained for the object - J_1i57FC for two series group is same.
The number range is - 0000020001 to 0000029999.
While day to day processing of subcontracting challan, challans are created with same number for two different series group. For example challan number 20001 is posted, Fully Reconcilled and completed for series group - 44.
But again the challan number 20001 is created for series group 64 as per number range assigned to series group 64.
When i am trying to refer the challan 20001 for different company and series group in Goods receipt, it issuing the message - Challan quantity has been fully reconcilled.
If i will check status of subcontracting challan 20001 for series group 64, it shows status posted only.
Please guide me, whether we cant assign the same number range for two different series groups or there is any mistake in Challan processing or any note is available on the issue.
Thanks in advance

Problem in Subcontracting Challan

Similar Messages

Maybe you are looking for