Problem in subreport value

Hello Experts,
I am creating the report for the closing stock.
For that I have created one main report and many subreport for each title in chart of accounts.
I have created static parameter "Show Details" to show the account balance in "details" and at title level only(Subtotal).
I have kept supress condition for subreport on
"Show Details='N'" and in section expert "Suppress Blank Section='True'"..
Now when I run report to show the account balance based on "Show Details='Yes'",report runs perfect but when I run report to show balances of accounts at title level
then it shows me zero amount however it should show me some amount at that position.
So please help me out..
Any help will be appreciated..

Getting parameters to pass into a SQL Command is pretty straight forward...
1) Get into your parameter and take note of the following...
- The EXACT spelling of the parameter name
- The data type of the parameter
2) Open the Command and add the parameter to the Parameter List... make sure to spell the Parameter Name EXACTLY the same as the report parameter... make sure to set the Value Type to match the original parameter.
3) Add the parameter to the Command's SQL... be sure to punctuate it properly...
Parameter Name:
MyParameter
SQL Code:
SELECT *
FROM Table
WHERE Table.Field = '{?MyParameter}'
HTH,
Jason

Similar Messages

Facing Problem with passing Values from One report to another

Hi,
I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
Please, let me know whats going wrong.
Thanks for the help.

sorry for the late updation.
My First Report, Summary level is a Pivot Table.
I tried the same report with Table option, the value is passing correctly.
Is there a way to get rid of this situation using Pivot table.
Thanks for your help.
below is the original request.
Hi,
I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
Please, let me know whats going wrong.
Thanks for the help.

I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

hi TimoHahn,
i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
Root cause of ServletException.
java.lang.NullPointerException
at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

Problem getting parameter values at the service end point

I am having problem getting parameter values at the service end point. I created service end point and this method is having 35 parameters and then i created test client file using Sun One Studio 5. but when i run this test client and make a call to service it sends wrong value to first three parameters to the service end point. I tried all the way round but it gave me same sort of problem. I change the order of parameters change the names of parameters but it didn�t work. And then i started chopping of parameter from the left side. And my problem is solved when my parameter list reached to 12 from 35. So is it a bug or some problem with my configuration or some thing else.
I am using sun one studio 5 with sun one app 7. My service end point does very simple thing. It only takes out put of the parameter to the server log file. And my wsdl file seems all right. There is no conflict with the count and data type of the parameter information it contains.
�     Service End Point Definition (in EJB)
public java.lang.String setNewAddress(java.lang.String propertyName, java.lang.String status, java.lang.String PMSCode, java.lang.String streetNumPrefix, int streetStartNum, java.lang.String streetStartNumSuffix, int streetEndNum, java.lang.String streetEndNumSuffix, java.lang.String streetName, java.lang.String streetType, java.lang.String streetSuffix, java.lang.String localityPrefix,java.lang.String localityName, java.lang.String postcode, java.lang.String stateCode, java.lang.String countryCode, java.lang.String description, java.lang.String coordinateAccuracy, int longitude, int latitude, java.lang.String planNumber, java.lang.String lotPrefix, int lotNumber, int siteID, java.lang.String countryName, java.lang.String parishName, java.lang.String section, int portionNum, int crownAllotNum, int titleVol, java.lang.String folio, java.lang.String esa, int aliasID, int aliasTagID,String ID) {
System.out.println(propertyName);
System.out.println(PMSCode);
System.out.println(streetNumPrefix);
........ taking printout of all the paramters
�     This is my WSDL file
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="NMService" targetNamespace="urn:NMService/wsdl" xmlns:tns="urn:NMService/wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types/>
<message name="NMServiceServantInterface_setNewAddress">
<part name="String_1" type="xsd:string"/>
<part name="String_2" type="xsd:string"/>
<part name="String_3" type="xsd:string"/>
<part name="String_4" type="xsd:string"/>
<part name="int_5" type="xsd:int"/>
<part name="String_6" type="xsd:string"/>
<part name="int_7" type="xsd:int"/>
<part name="String_8" type="xsd:string"/>
<part name="String_9" type="xsd:string"/>
<part name="String_10" type="xsd:string"/>
<part name="String_11" type="xsd:string"/>
<part name="String_12" type="xsd:string"/>
<part name="String_13" type="xsd:string"/>
<part name="String_14" type="xsd:string"/>
<part name="String_15" type="xsd:string"/>
<part name="String_16" type="xsd:string"/>
<part name="String_17" type="xsd:string"/>
<part name="String_18" type="xsd:string"/>
<part name="int_19" type="xsd:int"/>
<part name="int_20" type="xsd:int"/>
<part name="String_21" type="xsd:string"/>
<part name="String_22" type="xsd:string"/>
<part name="int_23" type="xsd:int"/>
<part name="int_24" type="xsd:int"/>
<part name="String_25" type="xsd:string"/>
<part name="String_26" type="xsd:string"/>
<part name="String_27" type="xsd:string"/>
<part name="int_28" type="xsd:int"/>
<part name="int_29" type="xsd:int"/>
<part name="int_30" type="xsd:int"/>
<part name="String_31" type="xsd:string"/>
<part name="String_32" type="xsd:string"/>
<part name="int_33" type="xsd:int"/>
<part name="int_34" type="xsd:int"/>
<part name="String_35" type="xsd:string"/></message>
<message name="NMServiceServantInterface_setNewAddressResponse">
<part name="result" type="xsd:string"/></message>
<portType name="NMServiceServantInterface">
<operation name="setNewAddress" parameterOrder="String_1 String_2 String_3 String_4 int_5 String_6 int_7 String_8 String_9 String_10 String_11 String_12 String_13 String_14 String_15 String_16 String_17 String_18 int_19 int_20 String_21 String_22 int_23 int_24 String_25 String_26 String_27 int_28 int_29 int_30 String_31 String_32 int_33 int_34 String_35">
<input message="tns:NMServiceServantInterface_setNewAddress"/>
<output message="tns:NMServiceServantInterface_setNewAddressResponse"/></operation></portType>
<binding name="NMServiceServantInterfaceBinding" type="tns:NMServiceServantInterface">
<operation name="setNewAddress">
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></output>
<soap:operation soapAction=""/></operation>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/></binding>
<service name="NMService">
<port name="NMServiceServantInterfacePort" binding="tns:NMServiceServantInterfaceBinding">
<soap:address location="http://localhost:80/NMService/NMService"/></port></service></definitions>
�     I followed steps given this example. http://developers.sun.com/prodtech/javatools/jsstandard/reference/docs/s1s5/stockapp.html.
If some one know what is wrong. Is it me or some thing wrong with the method I followed. But I am sure that I followed exactly the same method as it given in examples. So if some one can guide me
Thanks

I just found that there is a bug with Sun One Studio 5. It creates faulty JSP file to test the client for the web services. With above problem I tested my web services using different developing environment such as Jdeveloper 10g. I created client stub using wsdl file generated by sun one studio. And made call to my web service and all the parameter reached perfectly at service end point. And then I used stub class created by sun one studio for the client and made the same call. And it also went well. So the problem is with the test application (JSP File) sun one creates for my web service.
This is the majore problem i faced during the development. But still there is many problem along with this which is not seriouse enough but requires attension. I would like sun developers to make sun one studio IDE simpler and handy .

Getting Problem in retrieving values from JTable

Hi Guys,
Suppose i clicked in cell in a table to edit it and done some entry in it and without leaving that cell ( means focus is on that cell only) i clicked one button.
button prints table data on console.
now problem is the value in focused cell is coming as null or wht i previously return.
that means unless i m not leaving a cell the Jtable is not taking that value.
how could i overcome this problem
thanks in advance

Use this:table.putClientProperty("terminateEditOnFocusLost", Boolean.TRUE);The editor will be closed as soon as the table loses focus.

Problem with offset values

Hi Experts,
I have a problem with offset values. I have create a variable on OFISCPER, it's characteristic value, indivdual value, mandatory and ready for the input. I need to show the varibel period and the l previous period and so on till 12 periods. I used the offset values (-1, -2, etc.) but when I execute the query I can show just the variable period and the period previous I don`t see. The query is based on multiprovider and don´t has filters. Can anyone help me?

Leonel,
You may nt need to have 12 columns in the query designer.
You could include the keyfigure and restrict it to the variable and create the offset for the 12 periods
Check this http://help.sap.com/saphelp_nw04/helpdata/en/00/e8d13f7fb44c21e10000000a1550b0/frameset.htm
-Doodle

Facing problem of Assigned Value in CJ33

Hi All,
I am facinfg a problem with Assigned value shown in CJ33 T code. My Sceneraio is like this.....
1. I have activated availiblity controll on Released Budget.
2. I have maintained tolerence limit only for PR and PO.
Now My problem is that I budgeted one of my WBS as INR2000, Same amount is released also. I created a PR for INR500. The same PR is converted to a Purchase order of INR500.
Now in CJ33 T code my assigned value is comming as INR1000. Which is not correct for me because i have only used INR500 for my INR2000 budget and i want to use my Remaining INR1500 budget for another PR, But system is giving me Budget excedded error.
Please advise. It would be a great help of all of you.
Regards
Rahul

Hi Rahul,
Refer this thread,
Assigned Values For Project
I had a strong feelilng that you were using ECC 5.0. I had come across the same issue. Just refer the note and try to apply the notes mentioned there. I am not sure which one i had applied but you can try out with the note number that Muraleedharan has mentiond in the thread. It should work.
Kindly revert.
Best Regards,
Gokul

Probleme changing the value of a variable in movieclip from my scene

Hello,
i have a probleme changing the value of a variable in movieclip from my scene. i explain: I have combobox on my scene containing categories, and in the scene i load an xml file containing links to php files that work with the combobox.
Also on the scene i have a movieclip "filmstrip", inside this movieclip on the first frame i have a script loading the php file selected in the scene . i use a load() function with a variable "theUrl" inside like this : T.load(theUrl);.
In my scene i want to change the value of "theUrl" inside the movieClip filmstrip. I tried filmstrip.theUrl = url; But it doesnt work
the xml file
<?xml version="1.0" encoding="ISO-8859-1"?>
<slideshow>
<area title1="10 Last updated" link1="link1.php"/>
<area title1="special" link1="link2.php"/>
</slideshow>
here is the code on my scene:
var link1:Array = new Array();
var LINK:String;
var url:String;
var whoOn:Number;
whoOn=0;
var x:XML = new XML();
x.ignoreWhite = true;
x.onLoad = function(success) {
var photos:Array = this.firstChild.childNodes;
for (i=0; i<photos.length; i++) {
_root.link1.push(photos[i].attributes.link1);
url=link1[whoOn];
filmstrip.theUrl=url;//<<--HERE
x.load("category.xml");
var cbListener:Object = new Object();
cbListener.change = function(event_obj:Object) {
trace(select.selectedItem.label);
if (select.selectedItem.label == "Last updated") {
whoOn=0;
} else if (select.selectedItem.label == "Special") {
whoOn=1;
url=link1[whoOn];
filmstrip.theUrl=url; //<<-----HERE
select.addEventListener("change",cbListener);
here is the code inside the movie clip "filmstrip"
var T:XML = new XML();
T.ignoreWhite = true;
T.onLoad = function(xml) {
etc etc etc }
T.load(theUrl);    //<<---HERE it still undefined

YESSSS . Thanks you very much Kglad it wotk i put all in a function inside the filmstrip function Tload(theUrl){etc ect}and in the root i call it like this filmstrip.Tload(theUrl);   and it works
code in the root var link1:Array = new Array();
var LINK:String;
var url:String;
var whoOn:Number;
whoOn=0;
var x:XML = new XML();
x.ignoreWhite = true;
x.onLoad = function(success) {
var photos:Array = this.firstChild.childNodes;
for (i=0; i<photos.length; i++) {
_root.link1.push(photos[i].attributes.link1);
url=link1[whoOn];
theUrl=url;
filmstrip.Tload(theUrl);//<<--HERE
x.load("category.xml");
var cbListener:Object = new Object();
cbListener.change = function(event_obj:Object) {
trace(select.selectedItem.label);
if (select.selectedItem.label == "Last updated") {
whoOn=0;
} else if (select.selectedItem.label == "Special") {
whoOn=1;
url=link1[whoOn];
theUrl=url;
filmstrip.Tload(theUrl);//<<-----HERE
select.addEventListener("change",cbListener);

Problem in the values in invoice

HI All,
i have a problem in invoice printing, If i create a new billing document and generate the output via VF02, the line item values and tax values in the amount column not getting printed properly. if i take the printout for the same document again everything is comng perfectly. I have debugged the subroutine program which i created is working fine in the debug mode. when i generate any invoice for the first time, i have a problem in the values.
Please help me to find this..
Thanks and Regards,
Ahamed Anish S.

this was solved by myself..

Problems for displaying values

Hi,
Iam using struts and hibernate, am inserting values into database successfully. But am facing some problem for displaying values in VIEW page.. Am maintainig Session in action servlet..In jsp page only first row displayed numbertimes(depends on number rows in DB) ex i have 4 rows different values. But in View page only first row displayed 4 times. How can i displyed properly .plz help me its urgent?
in advance thanks?

Hi Amol,
in the iview property is the isolation method set to url or to embeded(it should be url)because this might cause the problems described here.
hope it helps,
Yoav

Problem for displaying values

Hi,
Iam using struts and hibernate, am inserting values into database successfully. But am facing some problem for displaying values in VIEW page.. Am maintainig Session in action servlet..In jsp page only first row displayed numbertimes(depends on number rows in DB) ex i have 4 rows different values. But in View page only first row displayed 4 times. How can i displyed properly .plz help me its urgent?
in advance thanks?

Babu,
This has been discussed in many old threads, try to find them. Also u can refer to article "Dependent Dynamic message choicelists ", at my blog
http://www.mukx.blogspot.com/
--Mukul

Problem While Defining "VALUE SET"

Dear All,
I am finding problems while defining "Value Set".
I wanted to select "DISTINCT" Column from a particular Table.
It is not allowing me to select distinct Column.
Is there any other alternative ??

Hi Tarak,
Create a view selecting distinct values and then use this view as a table in your value set.
Vishal

Problem displaying the value zero in dashboard

Hello,
I have a problem displaying the value zero.
When I am Treat Numbers As number, the value that appears
When Treat Numbers As Percentage box is empty.
Can you tell me how to display this value when the criterion
is in percentage format.
thanks for answers
Best regards

cast the number as float or multiply by 1.00 e.g. 1.00 * table.column

LOV Problem with multiple values

HI All,
I have a problem with LOV .When ever i click LOV after search button all values are displaying fine.
But when i get so many values i want to select only one vlaue that is not cmng to the main page ....Cursor is in running state always after that time out error is coming in my application .
This problem is coming with with only single value selection in lOV only problem with Multiple values retrival that time only...
(Iam using 11.1.1.3 Jdeveloper.)
Thanx in advance...

duplicate of {thread:id=2286814}

Problems with subreports from VB6, helpppppppppp!!!

Post Author: Alejandro
CA Forum: General
Hi, everybody, I have problems to see the information from subreports, I dont know what to do.
I have reports with 2 or more subreports inside it, I link the subreports with report, but when I try to see it from vb6 application
It asks me for the parameter value of the parameter created when I linked them, I dont want to it asks me for values, but this is only 1 problem, when I type values, I get next message "the field name is not know",
If I dont link anything when i run vb application I can see all (headers, titles, etc) but no the information retrieved from query, but from crystal reports all is fine in both cases(linked and not linked) I can see the reports and subreports with entire information
I need help, How can I do to see complete information in my reports, how to pass the values to subreports and it doesnt ask me for it.
In advance , thanks

Post Author: rasinc
CA Forum: General
I usually link my subreports whenever possible, back to the main report so that the main report passes the appropriate parameters and I only have to deal with the main report. Can be done in the designer on the Edit menu.

Problem in subreport value

Similar Messages

Maybe you are looking for