Problem in transports!! Please help

Hello BW Gurus,
I am havinga major problem with transports.The Client had separate HR box as the source system for HR Objects.
Since the HR box is obsolete, we assigned SAP R3 as the new source system to infosources and activated them.
I created a transport by collecting at the transfer rule level. The transport is failing saying it cant fing the SAP source system.
Post-import methods for change/transport request: BWDK960528
Follow-up action RS_AFTER_IMPORT for IOBJ L started at 20060203130629
Start of the after-import method for object type R3TR APCO (Activation Mode)
Start of the after-import method for object type R3TR IOBJ (Activation Mode)
Characteristic 0LANGU: Lower case makes selection of char. values difficult
Start of the after-import method for object type R3TR ISFS (Activation Mode)
Source system SAPTDV210 does not exist
No mapping defined for source system XXXHRP210
RFC connection to source system XXXHRP210 is damaged ==> no Metadata upload
Source system SAPTDV210 does not exist
Start of the after-import method for object type R3TR ISMP (Activation Mode)
Source system SAPTDV210 does not exist
No mapping defined for source system XXXHRP210
Source system SAPTDV210 does not exist
Start of the after-import method for object type R3TR ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 0ACTIONREAS_TEXT_BA not available. No activation possible.
There is no DataSource with these attributes
Reference to transfer structure 0ACTIONTYPE_TEXT_BA not available. No activation possible.

hi Simmi,
seems several errors
1. first you have to do source system mapping in your TARGET system (or you have to do correction since you change to new source system), from the log, i assume SAPTDV210 is the new SAP assigned (in bw dev/source), and e.g your target is SAPTQA999 then in SAPTQA999 do rsa1->tools->source system mapping, and fill up SAPTDV210 in 'orgsrc..'(first column) and SAPTQA999 in 'trgsrc..'(last column?) and save.
2. XXXHRP210 ? if this system still exist, right click this source system and 'restore'.
3. 0ACTIONREAS and 0ACTIONTYPE datasource doesn't exist in target system, in target system have you replicate from r/3 ?
if problem not solve in one go, would help if you specify bw dev name and target name, also r/3 new and old.
hope this helps.

Similar Messages

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

HT201263 my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

You may want to look at this about using recovery mode to restore your iPad.
http://support.apple.com/kb/ht4097

It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it, it won't move. I have never had this problem before. Please help.

It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it to the timeline, it won't move. I have never had this problem before. Please help.
P.S. I have tried other effects including transitions and it still won't let me drag.

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

your reed switch for the monitor is defective, it thinks youve shut the lid when you havent
mechanical fault , contact Apple for service and parts replacement.

I want to ask how to downgrade ios 7 to 6.1.3, because a lot of problems ios 7. please help

I want to ask how to downgrade ios 6.1.3 to 7, because a lot of problems ios 7. please help

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.

Error getting license. License server communication problem: E_ADEPT_NO_TOKEN. Please help

I try to download my ebooks on my laptop but receive the onscreen message, Error getting license, License server commucication problem: E_ADEPT_NO_TOKEN. Please help?

It means, the URLLink.ACSM file is corrupted. Please contact the book store and ask them to check whether the configuration in the server side is correct for that book.
One of the simple setting in the server which can case this issue is, setting the book for loan in server and providing the purchase option in the book store or vise verse.
Hope this solves your problem.

HT1386 i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..

i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..

From http://support.apple.com/kb/HT4060 :
The fastest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
iPods need less power to charge them (their wall charger is half the power of the iPad's, 5W as opposed to 10W), so are more likely to charge via USB

Nokia 5130 problems...please help!

hiya i recently updated my Nokia 5130 over-the-air and had no problems so far. then i have downloaded the latest internet settings fro my phone via my network operator. no problem there. but whenever i surf the net or use 3rd-party chat service the internet shuts down and just stops working? why is this? is there a way to use my internet (to surf or chat) seamlessly? (n.b. i have an unlimited internet option on my network account).
please help!

you need to call them again the message comes via text its a configuration setting ,then you save this message so call them again
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Tm2 1010ea problems!! PLEASE HELP

PLEASE HELP!!
I only just got my Tm2 1010ea yesterday and I'm already having problems.
I started it up, completed the initial setup and everything was fine. Then I tried to install itunes and norton 360 (which I know had compatability issues but i tried anyway ) and then the problems started.
Firstly, the icon for the touchsmart app changed and when I went to click it, i got an error message saying the program couldn't be located. Loads of other shortcuts stopped working as well.
Even when I went to Start -> All programs
I couldn't start the HP touchsmart app. Apparently Windows couldn't find the program!!
So I did a system restore to the recovery point before I installed itunes and norton.
Some of the shortcuts started working again but not all. Also, when I launched touchsmart, I couldn't get music or video or tutorials or webcam to work. I could get calendar and some of the other apps though.
So then I did another system restore this time to the very first recovery point. But still no good.
After hours of searching the web for answers, I downloaded a driver from the hp website which fixed the music, photo and video apps in touchsmart, but I still can't get webcam or tutorials to work.
Also, my HP advisor doesn't work!!
Since I only got the laptop yesterday I don't have anything on it that I need to keep so is there a way I can delete/clear EVERYTHING so that the laptop goes back to how it was before I even set it up?
It's very frustrating because according to my program manager itunes and norton have been removed and it looks like everything system wise has been restored to the original "settings", but the fact that when i open program files or program files (x86) I still have itunes and norton folders makes me think that it's interferring with my programs!!
If anyone can please help i'd really appreciate it!!! As you can probably tell, i'm not exactly proficient with computers but i didn't think i was THAT bad....

Hi,
It's not so easy to uninstall Norton product. Standard uninstallation process always leaves some files from this software in system. You will have too use Norton Removal Tool. iTunes is often very problematic software too.
All pre-installed software on your laptop You will find in C:\swsetup folder. All latest drivers You will find here.
From this what I see the best solution on your problems will be restoring system to orginal state. How to do that? Restart your system and press F11 on boot. For more information about it check below document:
Using HP Recovery Manager in Windows 7
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Mac mini intel shut down problem !! please help !!

hi !
following problem, mac mini intel single core does not shut down, shut down process last 10 min and more (bluescreen, black wheel running) but does not shutdown at all!!
When I log off my user and then press the shutdown button at the login window, it shuts down normally.
Any ideas???
Feeling like being in windows times???
please help
thanks
tobias

Good catch. I would never have though of that since I eagerly anticipate each chance I get for a clean install.
I much prefer to get a clean start and consciously change the things I need to work - often I find that the defaults really are better and would otherwise be stuck in habit...

My updates are failing. Adobe application manager may be damaged. I have downloaded and installed a new copy and the problem persists.   Please help.

I am trying to update Photoshop CS6 in order to read my camera's RAW files. It is a camera that is supported by Adobe Photoshop CS6. However, when I try to get the Adobe Application Manager to update the software, it fails to do so. (The spinning wheel tells me it is checking for updates and then quits, saying that "Update Failed - Updates could not be applied. Adobe Application Manager may be damaged. Download and install a new copy of Adobe Application Manager.")
I have tried to reinstall the Adobe Application Manager 8.0, which gives me the following error message "We've encountered the following issues. Installer failed to initialize. Please download Adobe Support Advisor to detect the problem." However, when I go to the link provided to download the Adobe Support Advisor, this piece of software NO LONGER EXISTS. "
The Adobe Support Advisor has been discontinued
The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
So, I have gone to the forums and took the recommended step to update my software manually - getting the update Photoshop_CS6_13_0_6upd-2.dmg. However, this update also fails stating that my Adobe Application Manager may be damages. Download and install a new copy of Adobe Application Manager. Which puts me right back where I started.
I have also taken the step of completely reinstalling Photoshop CS6. This did not solve the problems outlined above.
Please help!

reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates.

I have adobe premiere elements 10 and I am having some problems with it please help

So here are the problems I'm having with Adobe Premiere Elements 10:
1. Transitions will not load. The word loading pops up and it won't come up.
2. The videos won't play smoothly. When I press play it skipps in a way it won't play smooth which makes it really hard to edit.
3. Keeps closing out on me. It will have a thing that pops up that says "Adobe premiere elements has stopped working and closes out of the program. It does it constantly.
Please help me I don't know what is wrong with it.

The first two issues sound like a video driver problem.
What is the make/model of your video card/chip?
What is the installed video driver number and date?
For the last issue, it could be many things, including the video driver. I'd look over this ARTICLE, and if there is nothing in the first part, then move on to tuning up the OS an computer in the second part. That would probably be a good time to post the full specs. of your computer, and also both your Project and Source footage. Finally, part three covers many troubleshooting tips, and furnishes many links.
Good luck,
Hunt

SAPscript Output Problem - Very Urgent - Please help

Hi,
I am having the following problem with SAPscript.
In the Main Window, I have instructions to the printer in the ZPL2 language (For Zebra Printer).
There are also several variables, which are highlighted in Gray and enclosed in the&.
There are also several elements all of them empty except for the one where this code is.
Now, I received this program to modify in terms of code and the output.
IF you have never done any work with Zebra Printing, the way it is done is that you create a label using the Zebra BarOne or Zebra Designer program, then output it to an itf file, upload it into a standard text as .itf and copy the uploaded contents to the main window. When printing to a Zebra printer, the Zebra printer will read the instructions and will print the output.
Here is the problem: The config for the output type is correct.
When doing a printing test from SAPscript, I get the right output and the Zebra printer is able to print it.
However, the real process for this task will go through MB02. There, if I create a spool request using the proper method (select output type and etc.), it will go the spool. However, if I print preview or output (doesnt work with the Zebra printer, so I have to output to the Laser printer), it will output the following (none of the following includes any of the ZPL2 code/instructions. Instead, it seams to print the variables contents with the field name next to it This isnt whats its the Main window!!!)
http://img244.imageshack.us/img244/6915/66052475zk2.jpg
Please help. I have debugged but dont know what to do and cant find anything wrong.
This is very urgent. Any help will be useful.
Thanks,
John

Ok, maybe I have confused others in regards to the issue as well.
We expect this label to be output from a Zebra Printer.
When output through Sapscripts printing test, the preview from the spool shows the ZPL2 code in small font (non readible if a created a screenshot) and if sent to the Zebra Printer, it prints the label correctly.
When output through MB02, the preview from the spool shows the code that I have attached to the 1st post in this thread. If I try to output to the Zebra Printer, nothing happens because the ZPL2 instructions are not even in the preview and therefore, the Zebra printer recieves no instructions. I should not have mentioned the laser printer, because it has nothing to do with this issue.
I hope that this makes the issue a little more clear and understandable. Please help.
Here is the ZPL2 coding before uploading to standard text (only difference is that once uploaded, the '/' characters are removed.) However, I believe that the problem may lie in the print program and how it compiles but I debugged and haven't really seen where it comes from:
/:NEW-PAGE
/ ^XA
/ DFNEW-RE-1FS
/ ^PRC
/ LH0,0FS
/ ^LL1830
/ ^MD0
/ ^MNY
/ LH0,0FS
/ FO244,854A0N,55,46CI13FRFB154,1,0,LFN999^FS
/ FO819,698A0N,55,46CI13FRFN998FS
/ FO245,477A0N,55,46CI13FRFB755,1,0,RFN997^FS
/ FO389,926A0N,55,46CI13FRFB654,1,0,RFN996^FS
/ BY3,3.0FO42,1072B3N,N,152,N,YFRFN995FS
/ FO276,1258A0N,55,46CI13FRFN995FS
/ FO484,774A0N,55,46CI13FRFN994FS
/ FO817,774A0N,55,46CI13FRFN993FS
/ FO611,556A0N,55,46CI13FRFN992FS
/ FO245,556A0N,55,46CI13FRFN991FS
/ FO397,117A0N,55,46CI13FRFN990FS
/ FO245,405A0N,55,46CI13FRFB880,1,0,RFN989^FS
/ FO244,698A0N,55,46CI13FRFN988FS
/ FO629,998A0N,55,46CI13FRFN987FS
/ FO244,623A0N,52,42CI13FRFN986FS
/ FO397,261A0N,55,46CI13FRFB404,1,0,RFN985^FS
/ FO819,854A0N,55,46CI13FRFN984FS
/ FO725,554A0N,55,46CI13FRFN983FS
/ FO397,189A0N,55,42CI13FRFB695,1,0,RFN982^FS
/ FO397,333A0N,55,42CI13FRFN981FS
/ FO638,333A0N,55,42CI13FRFN980FS
/ FO391,21A0N,63,63CI13FRFB433,1,0,CFN979^FS
/ FO36,698A0N,55,46CI13FR
/ FDWBS:FS
/ FO37,405A0N,55,46CI13FR
/ FDMATL:FS
/ FO37,478A0N,62,44CI13FR
/ FDDESC:FS
/ FO554,698A0N,55,46CI13FR
/ FDSUPPLIER:FS
/ FO32,625A0N,55,46CI13FR
/ FDTEXT:FS
/ FO35,1258A0N,55,46CI13FR
/ FDBATCH NO:FS
/ FO770,775A0N,63,51CI13FR
/ FD/FS
/ FO32,854A0N,55,46CI13FR
/ FDESHM:FS
/ FO37,556A0N,55,46CI13FR
/ FDQTY:FS
/ FO32,998A0N,55,46CI13FR
/ FDSAP MATERIAL DOC NO:FS
/ FO525,333A0N,55,46CI13FR
/ FDofFS
/ FO556,854A0N,55,46CI13FR
/ FDINSPECT:FS
/ FO32,926A0N,55,46CI13FR
/ FDUNLOADING:FS
/ FO37,117A0N,55,46CI13FR
/ FDSTOCK TYPE:FS
/ FO32,774A0N,55,46CI13FR
/ FDPURCHASE ORDER:FS
/ FO37,188A0N,55,46CI13FR
/ FDDELIVER TO:FS
/ FO37,260A0N,55,46CI13FR
/ FDSTORAGE LOC:FS
/ FO37,332A0N,55,46CI13FR
/ FDCONTAINERS:FS
/ FO1,1359GB1217,0,6^FS
/ FO594,1359GB0,474,6^FS
/ ^XZ
/:NEW-PAGE
/ ^XA
/ ^XFNEW-RE-1.ZPL
/ FN999FD&ATWRT_HAZAMAT(6)&^FS
/ FN998FD&EKKO-LIFNR&^FS
/ FN997FD&MABDR-MAKTX&^FS
/ FN996FD&MSEG-ABLAD&^FS
/ FN995FD&MSEG-CHARG&^FS
/ FN994FD&MSEG-EBELN&^FS
/ FN993FD&MSEG-EBELP&^FS
/ FN992FD&MSEG-ERFME&^FS
/ FN991FD&MSEG-ERFMG&^FS
/ FN990FD&MSEG-INSMK(1)&^FS
/ FN989FD&MSEG-MATNR&^FS
/ FN988FD&MSEG-MAT_PSPNR&^FS
/ FN987FD&MSEG-MBLNR&^FS
/ FN986FD&MSEG-SGTXT(40)&^FS
/ FN985FD&MSEG-UMLGO&^FS
/ FN984FD&QALS-PRUEFLOS&^FS
/ FN983FD&V_BACKORDER&^FS
/ FN982FD&V_NAME3&^FS
/ FN981FD&WS_CNTR&^FS
/ FN980FD&WS_CON&^FS
/ FN979FD&WS_HEADER& &^FS
/ ^PQ1,0,1,N
/ ^XZ
/ ^FX End of job

Search problem with ActiveDirectory - please help

Hi,
I've tried to get a list of the users out of the Active Directory.
But I just can't get my code to work. It returns nothing back.
The problem should be simple. But I can not figure out why.
Please help!
Raymond
import javax.naming.*;
import javax.naming.event.*;
import javax.naming.directory.*;
import javax.naming.ldap.*;
import java.util.Hashtable;
import java.util.Vector;
import java.util.Enumeration;
public class AdClient {
public AdClient() {
getUsers();
public static void main(String args[]) {
Client client = new Client();
private void getUsers() {
// domain = utest
String INITCTX = "com.sun.jndi.ldap.LdapCtxFactory";
String HOST = "ldap://192.168.128.50:389";
String SEARCHBASE = "ou=Users,dc=utest,dc=com";
String FILTER = "cn=*";
try {
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
env.put(Context.PROVIDER_URL, HOST);
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL, "[email protected]");
env.put(Context.SECURITY_CREDENTIALS,"admin");
DirContext ctx = new InitialDirContext(env);
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
NamingEnumeration results;
// now search for the users
results = ctx.search(SEARCHBASE, FILTER, constraints);
while (results.hasMoreElements()) {
SearchResult sr = (SearchResult)results.nextElement();
System.out.println(sr.getName());
ctx.close();
} catch(Exception e) {
e.printStackTrace();
}

I tried your code...
There were two issues I saw, when I changed them it worked!
1) public static void main(String args[]) {
Client client = new Client();
should be
public static void main(String args[]) {
AdClient client = new AdClient();
2) String SEARCHBASE = "ou=Users,dc=utest,dc=com";
env.put(Context.SECURITY_PRINCIPAL, "[email protected]");
Should be
String SEARCHBASE = "ou=Users,dc=utest,dc=newcom,dc=com";
env.put(Context.SECURITY_PRINCIPAL, "[email protected]");

"Serious Problem in Struts" + "Please help me"

Hi all,
I m facing one problem in struts. I have A DTO with Attributes(data transfer Object) which contains one Array List. In that Arraylist i have other B DTO with Attributes.
In my Screen I have fields which are using some of the attributes from A DTo and B Dto
In the JSP
I m creating controls like this
<html:text name="facilityForm" property="dto.installationSite" />
in the ActionForm I m setting values which are typed in the screen to the dto.
I have to create one control(textbox) which is using B DTO Attribute..
How to do that?
if its the attribute of DTO i can create like this
"dto.installationSite"
But A Dto contains ArrayList that contains B Dto objects
<html:text name="facilityForm" property="dto.ARRAYLIST(B DTO).Attribute" />
Please help me...

try this... (not sure though)
<html:text name="facilityForm" property="dto[0].Attribute" />
or is it this:
<html:text name="facilityForm" property="dto(0).Attribute" />
... I'm not really sure about this, however. ...Maybe instead, loop thru the outer list and create a field for each object.

Problem in transports!! Please help

Similar Messages

Maybe you are looking for