Problem in two Step Transfer Posting - Store to Store (Mov type 313 & 315)

If I have posted three material documents against movement type 313. Now against one material document (movement type 313), I can post three material documents of movement type 315.
In short, If I have Stock in Transfer (Store location), then I can post material document (movement type 315) with a material document (movement type 313) against I have already posted material document (movement type 315).
Regards

Hi Leo,
Sorry, your question is not totally clear.
You wrote that you executed three postings of MVT 313. The question is that through how many postings you can receive this stock?
In this case I think the answer is that it depends on the 'stock in transfer' stock you removed from your storage location by MVT 313.
I mean if you posted 10 pcs than you can receive this qty through 10 postings if you receive only 1 pc per posting (MVT 315).
Please clarify your question.
Thanks,
Csaba

Similar Messages

  • Two steps transfer posting : 313 + 315

    Hi, can somebody help me to explain this system behavior :
    I'm using a two step stock transfer (313 + 315) from st. location to another within the same plant. I
    When I post the 313 movement from storage A to storage B , system generates a -313 movement in the issuing location and +313 movement in the receiving one.
    My expectation is to have also a -315 from transfer stock type.
    Why does the system generates only one +315 when I receive the gods form transfer stock type to unrestricted ? 
    Here is the  case :
    218162030          CORPO
    010      313       4901509784     1     11.12.2007               35- NR
    IM        313       4901509784     2     11.12.2007               35  NR
    IM        315       4901509785     1     11.12.2007               35  NR
    Thank you in advance for any help.
    Denis

    Dear All,
    I think this question hasn't been answered.
    It's not an (exact) explanation that 313+ and 313- is because of the two storage location, and 315 is because at that time only one SL is affected.
    Just think of MVT 321 when the story is only about one storage location but we can find both 321+ and 321-. The reason lies in the stock types I think (QI & unrestrected > increase 'unrestrected' & decrease 'QI')
    Does someone know why MVT 315 occures only once? Two stock types are affected by this movement as well.
    According to logic of 321 we should find 315+ & 315- (315+ to increase qty in 'unrestricted' and 315- to decrease qty in 'stock in transit').
    [Maybe we (i.e. I) should know the strucure of stock types to understand this.]
    Thanks,
    Csaba

  • Material loss tracking in two step transfer posting with in plant

    Dear Friends ,
    Here the case is  material will going loss when shifting one storage location to another , here i am using two step procedure . so how can i track rhe loss here . our client want to post loss value to production account only and also they want to know total loss in report . How it can be maintainable?.....which is right method for this .
    RB

    Hi,
    You can scrap the material that underwent losses either at issiuing location (reverse GI for that much qty) or at the receiving location (do GR then scrapping).

  • Two Step Transfer: Cancellation of posted GR with G/L

    System do not cancel material document having two line items of a material due to gain or loss postings.
    Please also note that this is a two step transfer scenario of IS oil.
    Can anyone help on this issue.

    Hello,
    I don't know if you still have the issue, but to avoid the error you should probably cancel the document via transaction [HUCANC].
    Regards,
    Stéphane

  • Error when doing two step transfer between Plants with split valuation

    Hi expert,
    I´ve activated split valuation for Material X , it has three Valuation types ( NEW, REPAIR and DAMAGE ) . The problem arose when i tried to do a two step transfer between plants ( mov 303 ) and i got the following error msg :
    Use one-step procedure for transfer posting to mat. subj. to valuation
    Message no. M7048
    Diagnosis
    In the receiving plant, the material is subject to split valuation. For this material, a stock transfer cannot be carried out using the two-step procedure.
    Procedure
    Use the one-step procedure (movement type 301) or a stock transfer order for the stock transfer.
    The message is very clear itself , but... i just wonder if there`s actually any way to avoid this, I tried to change the error msg into a warning but couldn´t find it in customizing. Thanks for any comments on this !

    Hi,
    What do you mean with "inconcistent to my storage type definition?", is that mean i can process two step transfer without using PO/delivery process or one-step movement? coz according to business requirement, we must use two step transfer considering to the distance between plants is so far and we want to make it the simple way so that PO/Delivery process isn't better solution. I think, this is an standard procedure all company over the world can use but just the reason of split valuation the system can't execute the transaction.
    Is there any config i miss to? is there any user exit i can use for this requirement? please help me..
    thanks,
    AJ

  • Canu00B4t use two step transfer with split valuation ?

    Hi people , i´ve activated split valuation for MaterialX , it has two Valuation types ( Production and Purchase ) . The problem arose when i tried to do a two step transfer between plants ( mov 303 ) and i got the following error msg :
    Use one-step procedure for transfer posting to mat. subj. to valuation
    Message no. M7048
    Diagnosis
    In the receiving plant, the material is subject to split valuation. For this material, a stock transfer cannot be carried out using the two-step procedure.
    Procedure
    Use the one-step procedure (movement type 301) or a stock transfer order for the stock transfer.
    The message is very clear itself , but... i just wonder if there`s actually any way to avoid this, considering that having to create a transfer order for each movement will duplicate work and using a one step transfer won´t be practical. I tried to change the error msg into a warning but couldn´t find it in customizing. Thanks for any comments on this !

    First of all , thanks everyone for the help.
    Csaba Szommer, Kunal ingale  , i read the OSS note and the pdf and indeed everything confirms it´s not possible to do the two step movement. So , i tried the stock transport order and something else appeared here. When creating this type of order , the system first ask for a Supplying Plant , then you can populate the material , quantity and the destination plant. But then it asks for the Valuation Type of the material involved, and it seems this field is Mandatory . Is it possible to make this field on the transport order as optional ? I couldn´t find this field at SPRO-MM-Purchasing-Purchase Order-Define Screen Layout at Document Level .
    I need this field to be optional for the following reason. In my company there´s a relation between two plants , Plant A ( from where products are dispatched to the customer ) and Plant B ( where the material is produced with valuation type "Production" and sometimes is buyed from vendors with valuation type "Purchase" ) . The idea is to run an MRP which will generate the material needs on Plant A considering the Sales Orders. This need will be then transformed (automatically by MRP ) in Stock Transport Orders with Supplying Plant "Plant B" and receiving "Plant A". The problem here is that , at the moment of the transport order creation it´s no possible to know which will be the valuation type of the material that will satisfy the need. I mean , Plant B ( production and buying plant ) will check the list of needs for Plant A and then will decide which material ( with which Valuation Type ) they will provide considering the actual stock levels at the time of the MRP run.
    In a few words, i see the only way to do a two step transfer of a split valuated material is using Stock Transport Orders , is there a way to make the field "Valuation Type" optional ?. The idea would be to choose the Valuation Type of the material at the moment of the Good Issue.  Thanks a lot , once again.
    Edited by: Christian  Len on Jul 7, 2008 3:16 PM

  • Ext. Number Range in Two Step Transfer

    Hi I was trying to implement two step (IS Oil) functionality and I want to use external number range for tracking. I have already created a complete scenario of two step transfer but it works with Internal number range only. this is because in PO I cannot enter ext.no range due to non availability of this field in two step transfer tab. I need to find out how should i proceed to activate this field in PO. it only shows tracking number which system uses for int.no ranges.

    Hi Leo,
    Sorry, your question is not totally clear.
    You wrote that you executed three postings of MVT 313. The question is that through how many postings you can receive this stock?
    In this case I think the answer is that it depends on the 'stock in transfer' stock you removed from your storage location by MVT 313.
    I mean if you posted 10 pcs than you can receive this qty through 10 postings if you receive only 1 pc per posting (MVT 315).
    Please clarify your question.
    Thanks,
    Csaba

  • Report to track interlinked movement of a material in a two step transfer

    Request your input for the following
    The scenario is that the stock transfer  from one storage location to the other happens a two step transfer (313 and 315). To track the invenotry movements they want a report on a daily basis (gap of 24 hrs, 48 hrs etc) which can list down all the details at item level for materials for which the movement type 313 has happened but movement type 315 still needs to happen and the time gap between these two steps (i.e wether it has been 1 day or two days. etc.).
    Is there is a standard report  for movement types which are interlinked (like in this case 313 and 315 ) through which we can track what is the time gap between the first and second movement type and how much stock is waiting for the second step to happen before it can be avaialable to sell.
    Thanks

    Hi,
    Refer report MB51
    here in selection screen enter mvmt types 313 and 315 and execute
    Here add following fields in layout;
    Entry Data and Time of Entry and anlayse the time duration for the movements 313 and 315.

  • STO, TWO STEP TRANSFER

    Hi MM experts,
    I m facing a problem to find a report to see how much material is transferred (STO) to specific storage location (movement type 351) (coz there are different storage locations) and how much material is received in receiving storage location (movement type 101). Actually i need to make inventory reconciliation, yet i can see same information via document by document analysis (ME23N), but this take long time. MB51 only shows sender storage location not receiving.
    Regards
    Tayyab

    DB49,
    SQ01 does not require SQL. It is designed for the end user. Although it can be frustrating to use, I believe it could work for your requirements.
    I don't think that's true. I would wonder if simple end users got authroization to create queries in SQ01 or even use SE16. In this way they could have access to all information because they could read all the data tables.
    Maybe SQVI would be more reasonable for an end user to build theor own queries but the data access problem would be an issue in this case too.
    Other question is that based on whatwould a company expect simple end users to be able to build queries?
    Tayyab,
    I think the option suggested by me (i.e. filter MB51 list using the STO numbers) can be used because it will display both the receiving and issuing SLocs - one record (one line) for the goods issue and one line for GR.
    Of course, this is not too comfortable but I'm afraid there's no standard report that would fulfill your requirement.
    I agree with DB49 that you should contact the person in charge at your company and make an official request to develop a Z-report or query - you have to have strong arguments because Z-report don't tend to be free. (If there are inhouse consultants at the company this issue shouldn't cause any problem I guess.)
    Regards,
    Csaba

  • Movement Type 313 Transfer SLOC to SLOC Report

    Hi,
    Is there are report avaialble in SAP that shows Stock in Transfer. I have tried MB5T and a few others and they don't work. Basically I want to transfer stock from 1 SLOC to anothe SLOC in two steps rather than 1 step hence using 313.
    When I transfer the stock in MMBE the material is in stock status Transfer (SLOC) which is fine. What i am looking for is a mass report that shows Stock in Transfer so it can be monitored.
    Please note I am not using Stock Transport Orders just the movement types.
    Regards
    Adeel

    Thanks for all your replies. I have already tried/know about the reports you have mentioned in your replies. I was just hoping there was a transaction that shows stock in transfer in slocs but i guess there isn't one.
    Regards
    Adeel

  • Stock Transfer for Excisable Materials Using Movement Type 301

    Hi,
    We are having a Plant 1002 as excisable Materials.
    During GR we following the process like GR (Part -I), Capture Invoice, Post Invoice.
    Can we transfer the Material from Plant 1002 to other Plant, say 1001, using Movement Type 301?
    Or we need to follow some other router for Stock Transfer for the Excisable Materials?
    I was told by the ex-consultant that we would be using Mov Type 301 for all Stock Transfers, but I have a doubt, please guide.*
    Regards,

    Hi PK,
    Here in Brazil we work with excisable material and when we have to transfer it plant to plant, we have to use IVA that performs tax posts on accounting document. Also, we have to create Nota Fiscal (BrazillianLegal Document).
    I think you have to talk to your legal/accounting area in order to make sure which procedure you will have to use.
    If you need tax posting on accounting document, then you will not be able to use 301 movement type.
    We use MM/SD Plant to Plant transfer (movement type 861 / 862)
    Depending on your Legal/accounting area feed back, you could use this scenario or just MM plant to plant transfer (movement type 303/305).
    If they are ok with no tax postings on accounting document, then 301 movement type should be used.
    Try to make a test, show then how it works, then you could get ok from then
    I hope it helps you.
    Best Regards,
    Natan

  • QM Quality  Module - error in transfer insp to blocked via move type 350

    QM Notification - Additional Functions in Action bar  - error in Insp to blocked (movement type 350)
    We are trying to implement the movement of goods from inspection to
    blocked stock through QM. We have added an item to the action bar and
    are using movement type 350.
    We have implemented several inventory transactions via the action  bar in Quality notifications.  All the transactions work except  this one.  We get the message "Must change Inspection Quantity  in QM system".  This is Movement type 350.  The Inspection to  Free (Movement type 321) works fine, as do Blocked to Inspection  (type 349) and Free to Inspection (320).
    Has anyone encountered and resolved this?

    Dear LudovicBento
    You cannot run this FM as QM stock can be  moved only by QA11 tcode. You may try to create a BDC to post the material
    from Quality
    Regards
    Gajesh

  • Post Goods Issue for movement type 351

    Hi experts,
    I need to perform a post goods issue for the movement type 351.
    which bapi we need to use? is it going to be "BAPI_GOODSMVT_CREATE" or something else.
    What are the information that we require other than movement type for performing post goods isue?
    Any pointers on this will be highly appreciated.
    Regards,
    Sajith

    Hi ,
    Thanks man.. Then where should I do that.
    Idoc is PORDCR102. Message type is PORDCR1.
    My requirement is to create a STO first in the user exit EXIT_SAPL2012_001 and then to perform a Post goods issue in the user exit EXIT_SAPL2012_003.
    Can u please explain it.
    Regards,
    Sajith

  • Difference between Stock transfer and transfer posting

    I am little confused about the difference between stock transfer and transfer posting. Please clarify
    <<Locked - reason: failed to search before posting question>>
    Edited by: Csaba Szommer on Feb 9, 2011 9:10 AM

    Hello,
    Transfer posting may involve or not involve the physical goods transfer.  In the system you might do transfer posting from quality to unrestricted, or from one store location to another.
    In transfer posting you remove and or replace materials from storage in one storage location and place them in another storage location.
    That transction code you use for transfer posting MB1B with following movement types may be used
    301, 303,305,311,411,309.
    301 is Stock Transfer Between Plants in One Step
    303 & 305 : Stock Transfer Between Plants in Two Steps
    In stock transfer, it always involves physical movement of goods, like transfer between plants under same company code or different company codes.
    Following types are possible with STO's
    Stock Transport Order Without Delivery
    Stock Transport Order with Delivery via Shipping
    Stock Transport Order with Delivery and Billing Document/Invoice
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm
    Please go through attach SAP document
    BR,
    Tushar

  • Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

    Hi,
    I am working with MTO scenario.
    I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
    However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
    Below steps are being follow:
    Scenario is MTO ( special stock subcontracting)
    1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
    2. RM code - 61, available stock 100 TO & batch no.0000000127
    3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
    5. Item Data details tabs are blank.---This is the issue / error.
    Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
    Please have a look on attachment for SAP screen issue.
    Regards
    Mohit Jaiswal

    Hi Mohit ,
    please check below link , you need to perform steps as given
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
    also see the sales order subcontracting using the business addon
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

Maybe you are looking for